PubMed Health⌕ Search

Biomedical subjects

Ricardo Franco

Publications and source records attributed to Ricardo Franco.

12 recordsLinked to original sources
PubMed2006

Spectroelectrochemistry of type II cytochrome c3 on a glycosylated self-assembled monolayer.

A modified silver electrode was prepared by the self-assembly of a thiol-derivatized neoglycoconjugate, forming a 2D surface with maltose functionality. This self-assembled-monolayer-modified electrode was utilized for adsorption and spectroelectrochemical studies of tetraheme-containing type II cytochrome c3. The glycosylated surface allowed for the determination of the hemes' redox potentials and demonstrated enhanced spectroelectrochemical performance, in comparison to the widely used self-assembled monolayer of 11-mercapto-undecanoic acid.

Adsorption↗
PubMed2006

The conserved active-site loop residues of ferrochelatase induce porphyrin conformational changes necessary for catalysis.

Binding of porphyrin to murine ferrochelatase, the terminal enzyme of the heme biosynthetic pathway, is investigated by employing a set of variants harboring mutations in a putative porphyrin-binding loop. Using resonance Raman (RR) spectroscopy, the structural properties of the ferrochelatase-bound porphyrins are examined, especially with respect to the porphyrin deformation occurring in the environment of the active site. This deformation is thought to be a key step in the enzymatic insertion of ferrous iron into the porphyrin ring to make heme. Our previous RR spectroscopic studies of binding of porphyrin to murine ferrochelatase led us to propose that the wild-type enzyme induces porphyrin distortion even in the absence of the metal ion substrate. Here, we broaden this view by presenting evidence that the degree of a specific nonplanar porphyrin deformation contributes to the catalytic efficiency of ferrochelatase and its variants. The results also suggest that the conserved Trp256 (murine ferrochelatase numbering) is partially responsible for the observed porphyrin deformation. Binding of porphyrin to the ferrochelatase variants causes a decrease in the intensity of RR out-of-plane vibrational mode gamma(15), a saddling-like mode that is strong in the wild-type enzyme. In particular, the variant with a catalytic efficiency 1 order of magnitude lower than that of the wild-type enzyme is estimated to produce less than 30% of the wild-type saddling deformation. These results suggest that specific conserved loop residues (especially Trp256) are directly involved in the saddling of the porphyrin substrate.

Amino Acid Sequence↗
PubMed2006

Chelatases: distort to select?

Chelatases catalyze the insertion of a specific metal ion into porphyrins, a key step in the synthesis of metalated tetrapyrroles that are essential for many cellular processes. Despite apparent common structural features among chelatases, no general reaction mechanism accounting for metal ion specificity has been established. We propose that chelatase-induced distortion of the porphyrin substrate not only enhances the reaction rate by decreasing the activation energy of the reaction but also modulates which divalent metal ion is incorporated into the porphyrin ring. We evaluate the recently recognized interaction between ferrochelatase and frataxin as a way to regulate iron delivery to ferrochelatase, and thus iron and heme metabolism. We postulate that the ferrochelatase-frataxin interaction controls the type of metal ion that is delivered to ferrochelatase.

Animals↗
PubMed2005

Resonance Raman fingerprinting of multiheme cytochromes from the cytochrome c3 family.

Resonance Raman (RR) spectroscopy was used to investigate conformational characteristics of the hemes of several ferricytochromes of the cytochrome c3 family, electron transfer proteins isolated from the periplasm and membranes of sulfate-reducing bacteria. Our analysis concentrated on the low-frequency region of the RR spectra, a fingerprint region that includes vibrations for heme-protein C-S bonds [nu(C(a)S)]. It has been proposed that these bonds are directly involved in the electron transfer process. The three groups of tetraheme cytochrome c3 analyzed, namely Type I cytochrome c (3) (TpIc (3)s), Type II cytochrome c (3) (TpIIc (3)s) and Desulfomicrobium cytochromes c3, display different frequency separations for the two nu(C(a)S) lines that are similar among members of each group. These spectral differences correlate with differences in protein structure observed among the three groups of cytochromes c3. Two larger cytochromes of the cytochrome c3 family display RR spectral characteristics for the nu(C(a)S) lines that are closer to TpIIc3 than to TpIc3. Two other multiheme cytochromes from Desulfovibrio that do not belong to the cytochrome c3 family display nu(C(a)S) lines with reverse relative areas in comparison with the latter family. This RR study shows that the small differences in protein structure observed among these cytochrome c3 correlate to differences on the heme-protein bonds, which are likely to have an impact upon the protein function, making RR spectroscopy a sensitive and useful tool for characterizing these cytochromes.

Amino Acid Sequence↗
PubMed2005

Colorimetric detection of eukaryotic gene expression with DNA-derivatized gold nanoparticles.

Thiol-linked DNA-gold nanoparticles were used in a novel colorimetric method to detect the presence of specific mRNA from a total RNA extract of yeast cells. The method allowed detection of expression of the FSY1 gene that encodes a specific fructose/H+ symporter in Saccharomyces bayanus PYCC 4565. FSY1 is strongly expressed when the yeast is grown in fructose as the sole carbon source, while cells cultivated in glucose as the sole carbon source repress gene expression. The presence of FSY1 mRNA is detected based on color change of a sample containing total RNA extracted from the organism and gold nanoparticles derivatized with a 15-mer of complementary single stranded DNA upon addition of NaCl. If FSY1 mRNA is present, the solution remains pink, changing to blue-purple in the absence of FSY1 mRNA. Direct detection of specific expression was possible from only 0.3 microg of unamplified total RNA without any further enhancement. This novel method is inexpensive, very easy to perform as no amplification or signal enhancement steps are necessary and takes less than 15 min to develop after total RNA extraction. No temperature control is necessary and color change can be easily detected visually.

Colorimetry↗
PubMed2005

Porphyrin-substrate binding to murine ferrochelatase: effect on the thermal stability of the enzyme.

Ferrochelatase (EC 4.99.1.1), the terminal enzyme of the haem biosynthetic pathway, catalyses the chelation of Fe(II) into the protoporphyrin IX ring. The energetics of the binding between murine ferrochelatase and mesoporphyrin were determined using isothermal titration calorimetry, which revealed a stoichiometry of one molecule of mesoporphyrin bound per protein monomer. The binding is strongly exothermic, with a large intrinsic enthalpy (DeltaH=-97.1 kJ x mol(-1)), and is associated with the uptake of two protons from the buffer. This proton transfer suggests that hydrogen bonding between ferrochelatase and mesoporphyrin is a key factor in the thermodynamics of the binding reaction. Differential scanning calorimetry thermograms indicated a co-operative two-state denaturation process with a single transition temperature of 56 degrees C for wild-type murine ferrochelatase. An increase in the thermal stability of ferrochelatase is dependent upon mesoporphyrin binding. Similarly, murine ferrochelatase variants, in which the active site Glu-289 was replaced by either glutamine or alanine and, when purified, contained specifically-bound protoporphyrin, exhibited enhanced protein stability when compared with wild-type ferrochelatase. However, in contrast with the wild-type enzyme, the thermal denaturation of ferrochelatase variants was best described as a non-co-operative denaturation process.

Animals↗
PubMed2002

Binding of protoporphyrin IX and metal derivatives to the active site of wild-type mouse ferrochelatase at low porphyrin-to-protein ratios.

Resonance Raman (RR) spectroscopy is used to examine porphyrin substrate, product, and inhibitor interactions with the active site of murine ferrochelatase (EC 4.99.1.1), the terminal enzyme in the biosynthesis of heme. The enzyme catalyzes in vivo Fe(2+) chelation into protoporphyrin IX to give heme. The RR spectra of native ferrochelatase show that the protein, as isolated, contains varying amounts of endogenously bound high- or low-spin ferric heme, always at much less than 1 equiv. RR data on the binding of free-base protoporphyrin IX and its metalated complexes (Fe(III), Fe(II), and Ni(II)) to active wild-type protein were obtained at varying ratios of porphyrin to protein. The binding of ferric heme, a known inhibitor of the enzyme, leads to the formation of a low-spin six-coordinate adduct. Ferrous heme, the enzyme's natural product, binds in the ferrous high-spin five-coordinate state. Ni(II) protoporphyrin, a metalloporphyrin that has a low tendency toward axial ligation, becomes distorted when bound to ferrochelatase. Similarly for free-base protoporphyrin, the natural substrate of ferrochelatase, the RR spectra of porphyrin-protein complexes reveal a saddling distortion of the porphyrin. These results corroborate and extend our previous findings that porphyrin distortion, a crucial step of the catalytic mechanism, occurs even in the absence of bound metal substrate. Moreover, RR data reveal the presence of an amino acid residue in the active site of ferrochelatase which is capable of specific axial ligation to metals.

Animals↗
PubMed2002

Unraveling the substrate-metal binding site of ferrochelatase: an X-ray absorption spectroscopic study.

Ferrochelatase (EC 4.99.1.1), the terminal enzyme of the heme biosynthetic pathway, catalyzes the insertion of ferrous iron into the protoporphyrin IX ring. Ferrochelatases can be arbitrarily divided into two broad categories: those with and those without a [2Fe-2S] center. In this work we have used X-ray absorption spectroscopy to investigate the metal ion binding sites of murine and Saccharomyces cerevisiae (yeast) ferrochelatases, which are representatives of the former and latter categories, respectively. Co(2+) and Zn(2+) complexes of both enzymes were studied, but the Fe(2+) complex was only studied for yeast ferrochelatase because the [2Fe-2S] center of the murine enzyme interferes with the analysis. Co(2+) and Zn(2+) binding to site-directed mutants of the murine enzyme were also studied, in which the highly conserved and potentially metal-coordinating residues H207 and Y220 were substituted by residues that should not coordinate metal (i.e., H207N, H207A, and Y220F). Our experiments indicate four-coordinate zinc with Zn(N/O)(3)(S/Cl)(1) coordination for the yeast and Zn(N/O)(2)(S/Cl)(2) coordination for the wild-type murine enzyme. In contrast to zinc, a six-coordinate site for Co(2+) coordinated with oxygen or nitrogen was present in both the yeast and murine (wild-type and mutated) enzymes, with evidence of two histidine ligands in both. Like Co(2+), Fe(2+) bound to yeast ferrochelatase was coordinated by approximately six oxygen or nitrogen ligands, again with evidence of two histidine ligands. For the murine enzyme, mutation of both H207 and Y220 significantly changed the spectra, indicating a likely role for these residues in metal ion substrate binding. This is in marked disagreement with the conclusions from X-ray crystallographic studies of the human enzyme, and possible reasons for this are discussed.

Amino Acid Substitution↗