Biomedical subjects

Richard L Ehman

Publications and source records attributed to Richard L Ehman.

At least 19 recordsLinked to original sources

PubMed2006

Fiducial markers for MR histological correlation in ex vivo or short-term in vivo animal experiments: a screening study.

PURPOSE: To test injectable fiducial markers for magnetic resonance (MR) histological correlation in ex vivo or in vivo animal experiments. MATERIALS AND METHODS: A total of 35 potential markers were tested ex vivo in pork muscle. The end-points were: 1) visibility, size, and shape on MR images and at macroscopic examination; 2) 24-hour stability; and 3) microscopic appearance. Selected markers were injected in vivo (rabbit's muscle and breast tumor tissue) to test their three-hour in vivo stability and their potential toxicity. Finally, different dilutions of the two best markers were assessed again through the same screening tests to determine whether their size on MR images could be customized by dilution. RESULTS: Two fluid acrylic paints containing inorganic pigments were found to be potentially interesting markers. On MR images, they created well-defined susceptibility artifacts. The markers made with iridescent bronze paint (iron oxide coated mica particles) were readily visible on microscopy and their size on MR images could be customized by dilution. The iridescent stainless steel paint (iron, chromium, nickel) created ex vivo the smallest markers in tissue but needed colloidal iron staining to be visible on microscopy and could not be easily diluted. CONCLUSION: Fluid acrylic paints are potentially interesting markers for MR histological correlation. Further studies are needed to assess their long-term properties.

Acrylates↗

PubMed2006

MR histological correlation: a method for cutting specimens along the imaging plane in animal or ex vivo experiments.

PURPOSE: To assess a method aimed at cutting histological specimens along the magnetic resonance (MR) imaging plane. MATERIAL AND METHODS: The method is performed in two steps: the imaging plane (defined by three acrylic paint markers) is made horizontal under MR guidance by using a mobile platform that can be rotated in three directions (PlaneFinder device [PFD]); then, the specimen is embedded in wax and cut horizontally. Three-dimensional images parallel to the markers' plane were obtained on 31 pork muscles containing a central hole with a pyramidal shape, with a technique of reference (RT images) and with PFD (PF images), before and after fixation. The last 17 fixed specimens were cut in the markers' plane (tissue section [TS] images). The central hole area (CHA) in the markers' plane was used to compare RT, PF, and TS images. Using a workstation, PF images were rotated and translated to estimate the shift along each direction that could explain the entire CHA difference between RT, PF, and TS images (maximum error, worst-case scenario). RESULTS: Excellent correlation was found between RT and PF images (r = 0.989, slope = 1.0175), PF and TS images (r = 0.991, slope = 1.0058), and RT images on fresh specimens and TS images (r = 0.979, slope = 1.0732). For each step, the maximum angle error was < or = 3 degrees in 88-95% of the specimens. CONCLUSION: Our methodology can be used to cut specimens along the imaging plane with high accuracy.

Acrylates↗

PubMed2006

Determination of thigh muscle stiffness using magnetic resonance elastography.

PURPOSE: To measure the elastic properties of the vastus lateralis (VL), vastus medialis (VM), and sartorius (Sr) muscles using magnetic resonance elastography (MRE). MATERIALS AND METHODS: To obtain a normative database of the aforementioned muscles, oblique scan directions were prescribed passing through each muscle. Shear waves were induced into the muscles using pneumatic and mechanical drivers at 90 and 120 Hz, respectively. These drivers were attached to the distal end of the right thigh with the knee flexed at 30 degrees . The foot was placed in a footplate containing MR-compatible load cells to record the force during a contraction (10% and 20% of the maximum voluntary contraction). RESULTS: The shear moduli measured at rest in the VL (N = 12), VM (N = 14), and Sr (N = 13) were 3.73 +/- 0.85 kPa, 3.91 +/- 1.15 kPa, and 7.53 +/- 1.63 kPa, respectively. The stiffness of both vasti increased with the level of contraction, while the stiffness of the Sr remained the same. CONCLUSION: The MRE technique was able to approximate the stiffness of different thigh muscles. Furthermore, the wave length was sensitive to the morphology (unipennate or longitudinal) and fiber composition (type I or II) in each muscle.

Adult↗

PubMed2006

Stiffness-weighted magnetic resonance imaging.

An imaging method is introduced in which the signal in MR images is affected by the stiffness distribution in the object being imaged. Intravoxel phase dispersion (IVPD) that occurs during MR elastography (MRE) acquisitions decreases the signal in soft regions more than in stiff regions due to changes in shear wave amplitude and wavelength. The IVPD effect is enhanced by lowpass filtering the MR k-space data with a circular Gaussian lowpass filter. A processing method is introduced to take the time series of MRE magnitude images with IVPD and produce a final stiffness-weighted image (SWI) by calculating the minimum signal at each pixel from a small number of temporal samples. The SWI technique is demonstrated in phantom studies as well as in the case of a preserved postmortem breast tissue specimen with a stiff lesion created by focused ultrasound ablation to mimic a breast cancer. When free of significant sources of depth-dependent wave attenuation, interference, and boundary effects, SWI is a simple, fast, qualitative technique that does not require the use of phase unwrapping or inversion algorithms for localizing stiff regions in an object.

Algorithms↗

PubMed2006

Rapid MR elastography using selective excitations.

Rapid MR elastography (MRE) techniques using spatially-selective excitations to reduce acquisition times to a few seconds or less were devised and tested. The techniques included reduced field of view (rFOV) MRE and 1D MRE (beam MRE) using 2D spatially selective RF excitations for gradient-echo (GRE) applications and intersecting 90 degrees and 180 degrees slice-selective excitations for spin-echo (SE) applications. It was shown that scan times could be reduced by a factor of 8 using rFOV MRE, and by 64 using beam MRE, while still obtaining stiffness estimates comparable to full-FOV MRE. Results were shown in gel phantom experiments as well as in the case of a preserved postmortem breast tissue specimen with a stiff lesion. These methods can be used to more rapidly interrogate regions of interest (ROIs) in tissue to quickly obtain information about the viscoelastic properties of that tissue.

Algorithms↗

PubMed2006

MR elastography of the liver: preliminary results.

PURPOSE: To develop a method for measuring liver stiffness with magnetic resonance (MR) elastography and to prospectively test this technique in healthy volunteers and patients with liver fibrosis. MATERIALS AND METHODS: This HIPAA-compliant study was approved by an institutional review board, and informed consent was obtained from each subject. First, to determine the feasibility of applying shear waves to the liver, a pneumatic acoustic wave generator was developed and tested by using a tissue-simulating gel phantom with ribs on one side and without ribs on the other. The effect of interposed ribs on stiffness measurements was tested. Then, liver stiffness was measured with MR elastography in 12 healthy volunteers (eight men, four women; mean age, 26.7 years; age range, 19-39 years) by using the subcostal approach and the transcostal approach and in 12 patients with chronic liver disease (six men, six women; mean age, 50.5 years; age range, 36-60 years) by using the transcostal approach. Various statistical analyses were performed to assess all measurements. RESULTS: Ex vivo, interposed ribs reduced shear wave amplitude but did not hinder stiffness measurements. In volunteers, the transcostal approach surprisingly yielded better shear waves in the liver than did the subcostal approach. The mean liver shear stiffness was significantly lower in volunteers (mean, 2.0 kPa +/- 0.3 [standard deviation]) than it was in patients with liver fibrosis (mean, 5.6 kPa +/- 5.0; median, 3.7 kPa; range, 2.7-19.2 kPa; P < .001). CONCLUSION: MR elastography of the liver is feasible and shows promise as a quantitative method for noninvasive assessment of liver fibrosis.

Adult↗

PubMed2005

Differential effects of pre-tension on shear wave propagation in elastic media with different boundary conditions as measured by magnetic resonance elastography and finite element modeling.

Magnetic resonance elastography (MRE) can non-invasively determine material stiffness based on the propagating shear wavelength. Shear wave propagation in a finite homogenous isotropic material can be affected by multiple factors. In this study we examined the effects of pre-tension and frequency on MRE shear measurements of gel phantoms with different boundary conditions, frequencies, and geometries. Results from MRE measurements were compared to wave motion theory in elastic solids and qualitatively to a finite element (FE) model. Results indicated that boundary conditions, geometry and pre-tension are important factors to be considered when performing MRE tests on a finite material, and that FE modeling can help explore how the shear wave propagation is affected under various boundary conditions and axial stresses, among other potential factors.

Biocompatible Materials↗

PubMed2005

Mechanical transient-based magnetic resonance elastography.

Magnetic resonance elastography (MRE) is a technique for quantifying material properties by measuring cyclic displacements of propagating shear waves. As an alternative to dynamic harmonic wave MRE or quasi-steady-state methods, the idea of using a transient impulse for mechanical excitation is introduced. Two processing methods to calculate shear stiffness from transient data were developed. The techniques were tested in phantom studies, and the transient results were found to be comparable to the harmonic wave results. Transient wave based analysis was applied to the brains of six healthy volunteers in order to assess the method in areas of complex wave patterns and geometry. The results demonstrated the feasibility of measuring brain stiffness in vivo using a transient mechanical excitation. Transient and harmonic methods both measure white matter (approximately 12 kPa) to be stiffer than gray matter ( approximately 8 kPa). There were some anatomic differences between harmonic and transient MRE, specifically where the transient results better depicted the deeper structures of the brain.

Algorithms↗

PubMed2005

Quantitative shear wave magnetic resonance elastography: comparison to a dynamic shear material test.

Magnetic resonance elastography (MRE), a phase contrast MRI technique, images the propagation of applied mechanical waves in tissue, allowing shear stiffness to be quantified in vivo. This MRE technique has been validated with static mechanical compression tests. Dynamic mechanical analysis (DMA) may be a more appropriate comparison to MRE because it directly measures the shear modulus dynamically, while compression tests convert the measured elastic modulus to shear modulus with an assumed Poisson ratio. This study compared the shear stiffness estimated with various MRE inversion algorithms (i.e., manual calculation, local frequency estimate, phase gradient, direct inversion, and matched filter) to the dynamic mechanical test. The shear stiffness of five agarose gels with concentrations ranging from 1.5 to 3.5% were measured using MRE and DMA. The phase gradient inversion algorithm overestimated the shear modulus at higher concentrations (i.e., 3-3.5% agar), while the results from the other techniques correlated well with the dynamic mechanical test.

Agar↗

PubMed2005

Lorentz-force-induced motion in conductive media.

This project was designed to assess whether MRI imaging could detect Lorentz-force-induced motion in conductive samples. Experiments were performed by applying alternating voltages across 2% agar and 18% bovine gels placed in the field of a 1.5-T MRI scanner. Motion-sensitized time-gated MRI images that were obtained and analyzed with custom-developed software used in previous studies revealed the production of movement in both agar and gel samples. Motion was most pronounced in the plane vertical to the sample and had the greatest amplitude when the current path was perpendicular to the scanner's magnetic field. These findings are compatible with the vector cross product nature of the Lorentz force and suggest that the imaging of Lorentz-force-induced motion in conductive samples is feasible. Whether this approach can be extended to study electrically active tissues such as the peripheral nerves, brain and heart remains to be seen.

Gels↗

PubMed2005

CT fluoroscopy-guided biopsy of the lung or upper abdomen with a breath-hold monitoring and feedback system: a prospective randomized controlled clinical trial.

PURPOSE: To prospectively determine the clinical effectiveness of a breath-hold monitoring and feedback system in computed tomographic (CT) fluoroscopy-guided biopsies in which respiratory motion is a problem. MATERIALS AND METHODS: Institutional review board approval and oral and written informed consent were obtained. This study was HIPAA compliant. A bellows-based system was used to monitor respiration and provide patient feedback. A randomized controlled clinical trial compared intermittent mode CT fluoroscopy-guided biopsies of the lung or upper abdomen performed with (n = 56) and without (n = 57) the bellows system. Inclusion criteria for 113 patients were lesions 6 cm or smaller in maximum dimension that were not affixed to the chest or abdominal wall. Primary outcome measurements were CT fluoroscopy exposure time and patient dose. Wilcoxon rank sum, chi(2), and Fisher exact tests were used for statistical analysis. RESULTS: Median CT fluoroscopy exposure time was 12.6 seconds (range, 2.4-44.4 seconds) for the bellows group and 18.0 seconds (range, 6.0-118.0 seconds) for the nonbellows group (P = .004). Patient dose was decreased in the bellows group (median dose, 29.5 mGy; range, 4.7-135.8 mGy) versus the nonbellows group (median, 41.3 mGy; range, 11.8-155.9 mGy) (P = .01). Lesions were accessed successfully with one needle puncture attempt in 43 of 56 patients (77%) in the bellows group and 30 of 57 patients (53%) in the nonbellows group (P = .007). Pneumothorax developed in 11 of 50 patients (22%) in the bellows group who underwent lung biopsy compared with 16 of 50 (32%) patients in the nonbellows group. CONCLUSION: A breath-hold monitoring and feedback system allows depiction of mobile target lesions throughout CT fluoroscopy-guided biopsy of the lung and upper abdomen.

Abdomen↗

PubMed2004

A finite element model for analyzing shear wave propagation observed in magnetic resonance elastography.

Magnetic resonance elastography (MRE) is a novel non-invasive approach to determine material stiffness by using a conventional magnetic resonance imaging (MRI) system incorporated with an oscillating motion-sensitizing gradient to detect nodal displacements produced by a shear excitation wave. The effects of material properties, excitation frequency, boundary conditions, and applied tension on shear wavelength measurement must be examined before MRE can become a useful diagnostic tool. We propose finite element (FE) modeling as a robust method to systematically study the effects of these parameters. An axisymmetric FE model was generated with ABAQUS to simulate agarose gel phantoms. The effects of material stiffness, density, and excitation frequency on propagating shear wavelength were examined individually. The effect of the boundary conditions on shear wavelength was also demonstrated. Results of shear wavelength from MRE measurement were compared with the results of FE model, which showed good agreement between the methods.

Biomechanical Phenomena↗

PubMed2004

Evaluation of renal parenchymal disease in a rat model with magnetic resonance elastography.

Alterations in the mechanical properties or "hardness" of tissues allow physicians to detect disease by palpation. Recently, attempts have been made to quantitate and image these tissue properties with the use of magnetic resonance elastography (MRE). This technique has been validated in ex vivo specimens, including kidney, breast, and prostate. In this study, in vivo MRE imaging of rat renal cortex is demonstrated and validated with a disease model that will facilitate further studies. Normal rats and rats with nephrocalcinosis induced with either 2 or 4 weeks of ethylene glycol exposure were studied with MRE. Histology in the diseased rats documented the presence of nephrocalcinosis. MRE measurements and images of shear stiffness were highly reproducible in individual rats. The shear stiffness of the renal cortex in normal rats was 3.87 kPa (95% CI 2.84-4.90 kPa). The shear stiffness increased to 5.02 kPa (95% CI 3.34-6.70 kPa) after 2 weeks of exposure, and to 6.49 kPa (95% CI 4.84-8.14 kPa) after 4 weeks of exposure (P = 0.0302, alpha < 0.05). MRE is capable of detecting alterations in the tissue mechanical properties of kidneys in vivo. It is a promising noninvasive technique that might have pathologic and prognostic significance.

Animals↗

PubMed2004

On the feasibility of elastic wave visualization within polymeric solids using magnetic resonance elastography.

In this paper, the feasibility of extending previously described magnetic resonance elastography (MRE) dynamic displacement (and associated elasticity) measurement techniques, currently used successfully in tissue, to solid materials which have much higher shear rigidity and much lower nuclear spin densities, is considered. Based on these considerations, the MRE technique is modified in a straightforward manner and used to directly visualize shear wave displacements within two polymeric materials, one of which is relatively stiff.

Algorithms↗

PubMed2003

Shear stiffness estimation using intravoxel phase dispersion in magnetic resonance elastography.

Dynamic MR elastography (MRE) is a phase-contrast technique in which the periodic shear motion of an object is encoded as variations in the phase of the reconstructed images. An alternative MRE method is presented whereby waves are depicted as intensity variations in the magnitude images due to intravoxel phase dispersion (IVPD). A theoretical framework is developed to model how the IVPD magnitude data are related to the underlying shear wave motion, and how they can be used to estimate shear stiffness. The results are shown in a series of phantom experiments to demonstrate that IVPD MRE complements phase-contrast MRE.

Agar↗

PubMed2003

Noninvasive muscle tension measurement using the novel technique of magnetic resonance elastography (MRE).

A novel method for direct measurement of the state of skeletal muscle contraction is introduced called magnetic resonance elastography (MRE). Such a technique is useful for avoiding the indeterminancy inherent in most inverse dynamic models of the musculoskeletal system. Within a standard MRI scanner, mechanical vibration is applied to muscle via the skin, creating shear waves that penetrate the tissue and propagate along muscle fibers. A gradient echo sequence is used with cyclic motion-encoding to image the propagating shear waves using phase contrast. Individual muscles of interest are identified and the shear wavelength in each is measured. Shear wavelength increases with increasing tissue stiffness and increasing tissue tension. Several ankle muscles were tested simultaneously in normal subjects. Applied ankle moment was isometrically resisted at several different foot positions. Shear wavelengths in relaxed muscle in neutral foot position was 2.34 +/- 0.47 cm for tibialis anterior (TA) and 3.13 +/- 0.24 cm for lateral gastrocnemius (LG). Wavelength increased in relaxed muscle when stretched (to 3.80 +/- 0.28 cm for TA in 45 degrees plantar-flexion and to 3.95 +/- 0.43 cm for LG in 20 degrees dorsi-flexion). Wavelength increased more significantly with contraction (to 7.71 +/- 0.97 cm in TA for 16 N m dorsi-flexion effort and to 7.90 +/- 0.34 cm in LG for 48 N m plantar-flexion effort). MRE has been shown to be sensitive to both passive and active tension within skeletal muscle making it a promising, noninvasive tool for biomechanical analysis. Since it is based on MRI technology, any muscle, however deep, can be interrogated using equipment commonly available in most health care facilities.

Ankle Joint↗

PubMed2003

Measurement of muscle activity with magnetic resonance elastography.

OBJECTIVE: To non-invasively determine muscle activity. DESIGN: A correlation analysis study. BACKGROUND: Electromyography is traditionally used to measure the electrical activity of a muscle and can be used to estimate muscle contraction intensity. This approach, however, is limited not only in terms of the volume of tissue that can be monitored, but must be invasive if deep lying muscles are studied. We wished to avoid these limitations and used magnetic resonance elastography in an attempt to non-invasively determine muscle activity. This novel approach uses a conventional MRI system. However, in addition to the imaging gradients, an oscillating, motion sensitizing field gradient is applied to detect mechanical waves that have been generated within the tissue. The wavelength correlates with the stiffness of the muscle and hence with the activity of the muscle. METHODS: Six volunteers (mean age: 30.1 years, range: 27-36 years) without orthopedic or neuromuscular abnormalities, lay supine with their legs within the coil of a MRI scanner. The wavelengths of mechanically generated shear waves in the tibialis anterior, medial and lateral head of the gastrocnemius and the soleus were measured as the subjects resisted ankle plantar-flexing (8.2 and 16.4 nm) and dorsi-flexing (20.2 and 40.4 nm) moments. The findings were then compared to EMG data collected under the same loading conditions. RESULTS: Magnetic resonance elastography wavelengths were linearly correlated to the muscular activity as defined by electromyography. (TA, R(2)=0.89, P=0.02; MG, R(2)=0.82, P=0.05; LG, R(2)=0.88, P=0.03; S, R(2)=0.90, P=0.02) CONCLUSIONS: Magnetic resonance elastography may be a promising tool for the non-invasive determination of muscle activity. RELEVANCE: Magnetic resonance elastography has potential as the basis for a new non-invasive approach to study in vivo muscle function.

Adult↗

PubMed2003

Intermittent-mode CT fluoroscopy-guided biopsy of the lung or upper abdomen with breath-hold monitoring and feedback: system development and feasibility.

A bellows-based breath-hold monitoring and feedback system was developed and evaluated for use in intermittent-mode computed tomographic (CT) fluoroscopy-guided biopsy procedures in the lung or upper abdomen. The bellows system is described, and its feasibility is demonstrated in studies with a respiratory phantom and human volunteers. Results are reported for seven patients who underwent bellows-assisted biopsy. Breath-hold monitoring and feedback with the bellows system allow the patient to perform reliable breath holding at a preselected level. This optimizes intermittent-mode CT fluoroscopy-guided biopsies by allowing consistent visualization of the target lesion throughout the procedure.

Abdomen↗