PubMed Health⌕ Search

Biomedical subjects

Richard R Schrock

Publications and source records attributed to Richard R Schrock.

At least 19 recordsLinked to original sources
PubMed2006

Synthesis of oligoenes that contain up to 15 double bonds from 1,6-heptadiynes.

This paper reports the synthesis of polyene oligomers ("oligoenes") that contain up to 15 double bonds that are identical to the "all five-membered ring" species formed through cyclopolymerization of diisopropyldipropargylmalonate. The oligoenes contain an isopropylidene unit at each end. The isolated oligoenes range from the "dimer" (a pentaene, (E)-di-1,2-[1-(2-methyl-propenyl)-4,4-di-iso-propyl-carboxy-cyclopent-1-enyl]-ethene (3b2)) to the "heptamer" (3b7, a pentadecaene). Oligoenes 3b2, 3b3, 3b4, 3b5, and 3b7 were prepared through Wittig-like reactions between aldehydes and the appropriate monometallic Mo alkylidene or bimetallic Mo bisalkylidene species whose alkylidene is derived from an identical five-membered ring monomeric unit. Compounds 3b2, 3b4, and 3b6 were prepared through McMurry coupling reactions of aldehydes. A representative aldehyde (the "monomeric" aldehyde) is diisopropyl-3-formyl-4-(2-methylprop-1-enyl)cyclopent-3-ene-1,1-dicarboxylate (2b), McMurry coupling of which yields 3b2. A heptaene that contains a six-membered ring in the central unit also was prepared in a Wittig-like reaction involving a bimetallic Mo alkylidene; this species is a model for oligoenes that contain both six-membered and five-membered rings. X-ray structures of two bimetallic species that are employed in the synthesis of the oligoenes are reported.

Alkynes↗
PubMed2006

Dipyrrolyl precursors to bisalkoxide molybdenum olefin metathesis catalysts.

Addition of 2 equiv of lithium pyrrolide to Mo(NR)(CHCMe2R')(OTf)2(DME) (OTf = OSO2CF3; R = 2,6-i-Pr2C6H3, 1-adamantyl, or 2,6-Br2-4-MeC6H2; R' = Me or Ph) produces Mo(NR)(CHCMe2R')(NC4H4)2 complexes in good yield. All compounds can be recrystallized readily from toluene or mixtures of pentane and ether and are sensitive to air and moisture. An X-ray structure of a 2,6-diisopropylphenylimido species shows it to be an unsymmetric dimer, {Mo(NAr)(syn-CHCMe2Ph)(eta5-NC4H4)(eta1-NC4H4)}{Mo(NAr)(syn-CHCMe2Ph)(eta1-NC4H4)2}, in which the nitrogen in the eta5-pyrrolyl bound to one Mo behaves as a donor to the other Mo. All complexes are fluxional on the NMR time scale at room temperature, with one symmetric species being observed on the NMR time scale at 50 degrees C in toluene-d8. The dimers react with PMe3 (at Mo) or B(C6F5)3 (at a eta5-NC4H4 nitrogen) to give monomeric products in high yield. They also react rapidly with 2 equiv of monoalcohols (e.g., Me3COH or (CF3)2MeCOH) or 1 equiv of a biphenol or binaphthol to give 2 equiv of pyrrole and bisalkoxide or diolate complexes in approximately 100% yield.

Alkenes↗
PubMed2006

Better characterization of surface organometallic catalysts through resolution enhancement in proton solid state NMR spectra.

Delayed-acquisition methods, namely, echo and constant-time-acquisition approaches, allow a significant improvement in resolution in the proton solid state NMR spectra of surface organometallic catalysts such as [syn-(SiO)Mo(=NAr)(=CH(t)Bu)(CH2(t)Bu)] and [(SiO)Re(C(t)Bu)(=CH(t)Bu)(CH2(t)Bu)] (syn/anti ratio = 1:1). This enables the observation of all of the proton resonances, which is not possible with the simple proton single-pulse technique under magic-angle spinning. For example, the methylene protons of the neopentyl ligands, buried in the large peak associated with all of the methyls in the 1H MAS spectrum, can easily be identified by recording a delayed-acquisition spectrum (resolution enhancement of a factor of 3 is obtained). Moreover, combining constant-time acquisition with heteronuclear carbon-proton correlation spectroscopy also improves the resolution of the 2D HETCOR spectra.

Journal Article↗
PubMed2006

Synthesis of molybdenum complexes that contain "hybrid" triamidoamine ligands, [(hexaisopropylterphenyl-NCH2CH2)2NCH2CH2N-aryl]3-, and studies relevant to catalytic reduction of dinitrogen.

In the Buchwald-Hartwig reaction between HIPTBr (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = hexaisopropylterphenyl) and (H2NCH2CH2)3N, it is possible to obtain a 65% isolated yield of (HIPTNHCH2CH2)2NCH2CH2NH2. A second coupling then can be carried out to yield a variety of "hybrid" ligands, (HIPTNHCH2CH2)2NCH2CH2NHAr, where Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, 3,5-(MeO)2C6H3, 3,5-Me2NC5H3, 3,5-Ph2NC5H3, 2,4,6-i-Pr3C6H2, or 2,4,6-Me3C6H2. The hybrid ligands may be attached to Mo to yield [hybrid]MoCl species. From the monochloride species, a variety of other species such as [hybrid]MoN, {[hybrid]MoN2}Na, and {[hybrid]Mo(NH3)}+ can be prepared. [Hybrid]MoN2 species were prepared through oxidation of {[hybrid]MoN2}Na species with ZnCl2, but they could not be isolated. [Hybrid]Mo=N-NH species could be observed as a consequence of the protonation of {[hybrid]MoN2}- species, but they too could not be isolated as a consequence of a facile decomposition to yield dihydrogen and [hybrid]MoN2 species. Attempts to reduce dinitrogen catalytically led to little or no ammonia being formed from dinitrogen. The fact that no ammonia was formed from dinitrogen in the case of Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, or 3,5-(MeO)2C6H3 could be attributed to a rapid decomposition of intermediate [hybrid]Mo=N-NH species in the catalytic reaction, a decomposition that was shown in separate studies to be accelerated dramatically by 2,6-lutidine, the conjugate base of the acid employed in the attempted catalytic reduction. X-ray structures of [(HIPTNHCH2CH2)2NCH2CH2N{3,5-(CF3)2C6H3}]MoCl and [(HIPTNHCH2CH2)2NCH2CH2N(3,5-Me2C6H3)]MoN2}Na(THF)2 are reported.

Ammonia↗
PubMed2006

Synthesis of [(HIPTNCH2CH2)3N]V compounds (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3) and an evaluation of vanadium for the reduction of dinitrogen to ammonia.

Green [HIPTN3N]V(THF) ([HIPTN3N]3- = [(HIPTNCH2CH2)3N]3-, where HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3) can be prepared in a 70-80% yield via the addition of H3[HIPTN3N] to VCl3(THF)3 in THF, followed by the addition of LiN(SiMe3)2. From [HIPTN3N]V(THF), the following have been prepared: {[HIPTN3N]VN2}K, [HIPTN3N]V(NH3), [HIPTN3N]V=NH, [HIPTN3N]V=NSiMe3, [HIPTN3N]V=O, [HIPTN3N]V=S, and [HIPTN3N]V(CO). No ammonia is formed from dinitrogen using {[HIPTN3N]VN2}K, [HIPTN3N]V=NH, or [HIPTN3N]V(NH3) as the initial species under conditions that were successful in the analogous [HIPTN3N]Mo system. X-ray structural studies are reported for [HIPTN3N]V(THF) and [HIPTN3N]V(NH3).

Ammonia↗
PubMed2006

Catalytic reduction of dinitrogen to ammonia at a single molybdenum center.

Since our discovery of the catalytic reduction of dinitrogen to ammonia at a single molybdenum center, we have embarked on a variety of studies designed to further understand this complex reaction cycle. These include studies of both individual reaction steps and of ligand variations. An important step in the reaction sequence is exchange of ammonia for dinitrogen in neutral molybdenum(III) compounds. We have found that this exchange reaction is first order in dinitrogen and relatively fast (complete in <1 h) at 1 atm of dinitrogen. Variations of the terphenyl substituents in the triamidoamine ligand demonstrate that the original ligand is not unique in its ability to yield successful catalysts. However, complexes that contain sterically less demanding ligands fail to catalyze formation of ammonia from dinitrogen; it is proposed as a consequence of a base-catalyzed decomposition of a diazenido (Mo-N=NH) intermediate.

Ammonia↗
PubMed2006

Synthesis of [(HIPTNCH2CH2)3N]Cr Compounds (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3) and an evaluation of chromium for the reduction of dinitrogen to ammonia.

Red-black [HIPTN3N]Cr (1) ([HIPTN3N]3- = [(HIPTNCH2CH2)3N]3- where HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = HexaIsoPropylTerphenyl) can be prepared from CrCl3, while green-black [HIPTN3N]Cr(THF) (2) can be prepared from CrCl3(THF)3. Reduction of {1|2} (which means either 1 or 2) with potassium graphite in ether at room temperature yields [HIPTN3N]CrK (3) as a yellow-orange powder. There is no evidence that dinitrogen is incorporated into 1, 2, or 3. Compounds that can be prepared readily from {1|2} include red [HIPTN3N]CrCO (4), blood-red [HIPTN3N]CrNO (6), and purple [HIPTN3N]CrCl (7, upon oxidation of {1|2} with AgCl). The dichroic (purple/green) Cr(VI) nitride, [HIPTN3N]CrN (8) was prepared from Bu4NN3 and 7. X-ray studies have been carried out on 4, 6, and 7, and on two co-crystallized compounds, 7 and [HIPTN3N]CrN3 (65:35) and [HIPTN3N]CrN3 and 8 (50:50). Exposure of a degassed solution of {1|2} to an atmosphere of ammonia does not yield "Cr(NH3)" as a stable and well-behaved species analogous to Mo(NH3). An attempt to reduce dinitrogen under conditions described for the catalytic reduction of dinitrogen by [HIPTN3N]Mo compounds with 8 yielded a substoichiometric amount (0.8 equiv) of ammonia, which suggests that some ammonia is formed from the nitride but none is formed from dinitrogen.

Ammonia↗
PubMed2006

Enantioselective synthesis of cyclic enol ethers and all-carbon quaternary stereogenic centers through catalytic asymmetric ring-closing metathesis.

The first examples of catalytic asymmetric ring-closing metathesis (ARCM) reactions of enol ethers are reported. To identify the most effective catalysts, various chiral Mo- and Ru-based catalysts were screened. Although chiral Ru catalysts (those that do not bear a phosphine ligand) promote ARCM in some cases, such transformations proceed in <10% ee. In contrast, Mo-based alkylidenes give rise to efficient ARCM and deliver the desired products in the optically enriched form. Thus, Mo-catalyzed enantioselective transformations allow access to various five- and six-membered cyclic enol ethers in up to 94% ee from readily available achiral starting materials. The first examples of catalytic ARCM that lead to the formation of all-carbon quaternary stereogenic centers are also disclosed. Mechanistic models that offer a plausible rationale for the identity of major enantiomers as well as the observed levels of enantioselectivity are provided. Representative examples demonstrate that the enol ether moiety and the unreacted alkene of the ARCM products can be discriminated with excellent site selectivity (>98%).

Alkenes↗
PubMed2005

Enantioselective synthesis of cyclic amides and amines through mo-catalyzed asymmetric ring-closing metathesis.

First, an efficient method for the synthesis of optically enriched N-fused bicyclic structures is reported. Through Mo-catalyzed desymmetrization of readily available achiral polyene substrates, 5,6-, 5,7-, and 5,8-bicyclic amides can be synthesized in up to >98% ee. The effects of catalyst structure, olefin substitution, positioning of Lewis basic functional groups and ring size are examined and discussed in detail. In the second phase of investigations, a catalytic asymmetric method for highly enantioselective (up to 97% ee) synthesis of small- and medium-ring unsaturated cyclic amines is reported; optically enriched products bear a secondary amine or a readily removable Cbz or acetamide unit. Regio- and diastereoselective functionalizations of olefins within the optically enriched amine products have been carried out. Both catalytic asymmetric methods include transformations that lead to the formation of trisubstituted as well as disubstituted cyclic alkenes. The protocols outlined herein afford various cyclic amines of high optical purity; such products are not easily accessed by alternative protocols and can be used in enantioselective total syntheses of biologically active molecules.

Amides↗
PubMed2005

High oxidation state alkylidene and alkylidyne complexes.

Electron deficient high oxidation state early transition metal complexes that contain metal-carbon double or triple bonds and bulky supporting ligands have been found to be highly reactive catalysts for the alkene and alkyne metathesis reactions, respectively.

Journal Article↗
PubMed2005

Catalytic reduction of dinitrogen to ammonia at well-defined single metal sites.

Dinitrogen (N2) is reduced to ammonia at room temperature and 1atm with molybdenum catalysts that contain tetradentate [HIPTN3N]3- triamidoamine ligands {[HIPTN3N]3-=[{3,5-(2,4,6-i-Pr3C6H2)2C6H3NCH2CH2}3N]3-, an example being [HIPTN3N]Mo(N2)} in heptane. Slow addition of the proton source ({2,6-lutidinium}{BAr'4}; Ar'=3,5-(CF3)2C6H3) and reductant (decamethyl chromocene) assure a high yield of ammonia (63-65% in four turnovers) versus dihydrogen formation. Numerous X-ray studies, along with isolation and characterization of seven intermediates in the proposed catalytic reaction (under noncatalytic conditions), suggest that N2 is being reduced at a sterically protected, single Mo centre that cycles between states Mo(III), Mo(IV), Mo(V) and Mo(VI).

Ammonia↗
PubMed2005

Studies relevant to catalytic reduction of dinitrogen to ammonia by molybdenum triamidoamine complexes.

In this paper we explore several issues surrounding the catalytic reduction of dinitrogen by molybdenum compounds that contain the [(HIPTNCH2CH2)3N]3- ligand (where HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3). Four additional plausible intermediates in the catalytic dinitrogen reduction have now been crystallographically characterized; they are MoN= NH (Mo = [(HIPTNCH2CH2)3N]Mo), [Mo=NNH2][BAr'4] (Ar' = 3,5-(CF3)2C6H3), [Mo=NH][BAr'4], and Mo(NH3). We also have crystallographically characterized a 2,6-lutidine complex, Mo(2,6-Lut)+, which is formed upon treatment of MoH with [2,6-LutH][B(C6F5)4]. We focus on the synthesis of compounds that have not yet been isolated, which include Mo=NNH2, Mo=NH, and Mo(NH2). Mo=NNH2, formed by reduction of [Mo=NNH2]+, has not been observed. It decomposes to give mixtures that contain two or more of the following: MoN=NH, Mo triple bond N, Mo(NH3)+, Mo(NH3), and ammonia. Mo=NH, which can be prepared by reduction of [Mo=NH]+, is stable for long periods in the presence of a small amount of CrCp*2, but in the absence of CrCp*2, and in the presence of Mo=NH+ as a catalyst, Mo=NH is slowly converted into a mixture of Mo triple bond N and Mo(NH2). Mo(NH2) can be produced independently by deprotonation of Mo(NH3)+ with LiN(SiMe3)2 in THF, but it decomposes to Mo triple bond N upon attempted isolation. Although catalytic reduction of dinitrogen could involve up to 14 intermediates in a "linear" sequence that involves addition of "external" protons and/or electrons, it seems likely now that several of these intermediates, along with ammonia and/or dihydrogen, can be produced in several reactions between intermediates that themselves behave as proton and/or electron sources.

Amides↗
PubMed2005

Catalytic reduction of dinitrogen to ammonia at a single molybdenum center.

This account explores the catalytic reduction of dinitrogen by molybdenum complexes that contain the [HIPTN(3)N](3-) ligand ([HIPTN(3)N](3-)) = [(HIPTNCH(2)CH(2))(3)N](3-), where HIPT = 3,5-(2,4,6-i-Pr(3)C(6)H(2))(2)C(6)H3) at room temperature and pressure with protons and electrons. A total of 7-8 equiv of ammonia is formed out of approximately 12 possible (depending upon the Mo derivative employed). No hydrazine is formed. Numerous X-ray studies of proposed intermediates in the catalytic cycle suggest that N(2) is being reduced at a sterically protected, single Mo center operating in oxidation states between Mo(III) and Mo(VI). Subtle variations of the [HIPTN(3)N](3-) ligand are not as successful as a consequence of an unknown shunt in the catalytic cycle that consumes reduction equivalents to yield (it is proposed) dihydrogen [corrected]

Ammonia↗
PubMed2004

Supported chiral Mo-based complexes as efficient catalysts for enantioselective olefin metathesis.

Syntheses and catalytic activities of seven new polymer-supported chiral Mo-based complexes are disclosed. Four of the complexes are polystyrene-based, and three involve polynorbornene supports. Studies concerning the ability of the polymer-bound chiral complexes to promote an assortment of asymmetric ring-closing (ARCM) and ring-opening (AROM) metathesis reactions are detailed. In many instances, levels of reactivity and enantioselectivity are competitive with those of the analogous homogeneous catalysts. The positive effect of lower cross-linking within the polymer backbone on reaction efficiency and asymmetric induction is detailed. The optically enriched products obtained through the use of the supported complexes, after simple filtration and removal of the supported Mo catalysts, contain significantly lower levels of metal impurities as compared to products synthesized with the corresponding homogeneous catalysts.

Alkenes↗