PubMed Health⌕ Search

Biomedical subjects

Rik K Wierenga

Publications and source records attributed to Rik K Wierenga.

At least 19 recordsLinked to original sources

High resolution crystal structures of unliganded and liganded human liver ACBP reveal a new mode of binding for the acyl-CoA ligand.

The acyl-CoA binding protein (ACBP) is essential for the fatty acid metabolism, membrane structure, membrane fusion, and ceramide synthesis. Here high resolution crystal structures of human cytosolic liver ACBP, unliganded and liganded with a physiological ligand, myristoyl-CoA are described. The binding of the acyl-CoA molecule induces only few structural differences near the binding pocket. The crystal form of the liganded ACBP, which has two ACBP molecules in the asymmetric unit, shows that in human ACBP the same acyl-CoA binding pocket is present as previously described for the bovine and Plasmodium falciparum ACBP and the mode of binding of the 3'-phosphate-AMP moiety is conserved. Unexpectedly, in one of the acyl-CoA binding pockets the acyl moiety is bound in a reversed mode as compared with the bovine and P. falciparum structures. In this binding mode, the myristoyl-CoA molecule is fully ordered and bound across the two ACBP molecules of the crystallographic asymmetric unit: the 3'-phosphate-AMP moiety is bound in the binding pocket of one ACBP molecule and the acyl chain is bound in the pocket of the other ACBP molecule. The remaining binding pocket cavities of these two ACBP molecules are filled by other ligand fragments. This novel binding mode shows that the acyl moiety can flip out of its classical binding pocket and bind elsewhere, suggesting a mechanism for the acyl-CoA transfer between ACBP and the active site of a target enzyme. This mechanism is of possible relevance for the in vivo function of ACBP.

Acyl Coenzyme A↗

Functional role of the conserved active site proline of triosephosphate isomerase.

The importance of the fully conserved active site proline, Pro168, for the reaction mechanism of triosephosphate isomerase (TIM) has been investigated by studying the enzymatic and crystallographic properties of the P168A variant of trypanosomal TIM. In TIM, Pro168 follows the key catalytic residue Glu167, situated at the beginning of the flexible active site loop (loop 6). Turnover numbers of the P168A variant for its substrates are reduced approximately 50-fold, whereas the Km values are approximately 2 times lower. The affinity of the P168A variant for the transition state analogue 2-phosphoglycolate (2PG) is reduced 5-fold. The crystal structures of unliganded and liganded (2PG) P168A show that the phosphate moiety of 2PG is bound similarly as in wild-type TIM, whereas the interactions of the carboxylic acid moiety with the side chain of the catalytic Glu167 differ. The unique properties of the proline side chain at position 168 are required to transmit ligand binding to the conformational change of Glu167: the side chain of Glu167 flips from the inactive swung-out to the active swung-in conformation on ligand binding in wild-type TIM, whereas in the mutant this conformational change does not occur. Further structural comparisons show that in the wild-type enzyme the concerted movement of loop 6 and loop 7 from unliganded-open to liganded-closed appears to be facilitated by the interactions of the phosphate moiety with loop 7. Apparently, the rotation of 90 degrees of the Gly211-Gly212 peptide plane of loop 7 plays a key role in this concerted movement.

Alanine↗

The planar conformation of a strained proline ring: a QM/MM study.

QM and QM/MM energy calculations have been carried out on an atomic resolution structure of liganded triosephosphate isomerase (TIM) that has an active site proline (Pro168) in a planar conformation. The origin of the planarity of this proline has been identified. Steric interactions between the atoms of the proline ring and a tyrosine ring (Tyr166) on one side of the proline prevent the ring from adopting the up pucker (chi1 is approximately -30 degrees), while the side chain of a nearby alanine (Ala171) forbids the down pucker (chi1 is approximately +30 degrees). To obtain a proline conformation that is in agreement with the experimentally observed planar state, a quantum system of sufficient size is required and should at least include the nearby side chains of Tyr166, Ala171, and Glu129 to provide enough stabilization. It is argued that the current force fields for structure optimization do not describe strained protein fragments correctly. The proline is part of a catalytic loop that closes upon ligand binding. Comparison of the proline conformation in different TIM X-ray structures, indicates that in the closed conformation of TIM the proline is planar or nearly planar, while in the open conformation it is down puckered. This suggests that the planarity possibly plays a role in the overall catalytic cycle of TIM, presumable acting as a reservoir of energy that becomes available upon loop opening.

Alanine↗

The thiolase superfamily: condensing enzymes with diverse reaction specificities.

The formation of a carbon-carbon bond is an essential step in the biosynthetic pathways by which fatty acids and polyketides are made. The thiolase superfamily enzymes catalyse this carbon-carbon-bond formation via a thioester-dependent Claisen-condensation-reaction mechanism. In this way, fatty-acid chains and polyketides are made by sequentially adding simple building blocks, such as acetate units, to the growing molecule. A common feature of these enzymes is a reactive cysteine residue that is transiently acylated in the catalytic cycle. The wide catalytic diversity of the thiolase superfamily enzymes is of great interest. In particular, the type-III polyketide synthases make complicated compounds of great biological importance using multiple, subsequent condensation reactions, which are all catalysed in the same active-site cavity. The crucial metabolic importance of the bacterial fatty-acid-synthesizing enzymes stimulates in-depth studies that aim to develop efficient anti-bacterial drugs.

Acyltransferases↗

Structural studies of MFE-1: the 1.9 A crystal structure of the dehydrogenase part of rat peroxisomal MFE-1.

The 1.9 A structure of the C-terminal dehydrogenase part of the rat peroxisomal monomeric multifunctional enzyme type 1 (MFE-1) has been determined. In this construct (residues 260-722 and referred to as MFE1-DH) the N-terminal hydratase part of MFE-1 has been deleted. The structure of MFE1-DH shows that it consists of an N-terminal helix, followed by a Rossmann-fold domain (domain C), followed by two tightly associated helical domains (domains D and E), which have similar topology. The structure of MFE1-DH is compared with the two known homologous structures: human mitochondrial 3-hydroxyacyl-CoA dehydrogenase (HAD; sequence identity is 33%) (which is dimeric and monofunctional) and with the dimeric multifunctional alpha-chain (alphaFOM; sequence identity is 28%) of the bacterial fatty acid beta-oxidation alpha2beta2-multienzyme complex. Like MFE-1, alphaFOM has an N-terminal hydratase part and a C-terminal dehydrogenase part, and the structure comparisons show that the N-terminal helix of MFE1-DH corresponds to the alphaFOM linker helix, located between its hydratase and dehydrogenase part. It is also shown that this helix corresponds to the C-terminal helix-10 of the hydratase/isomerase superfamily, suggesting that functionally it belongs to the N-terminal hydratase part of MFE-1.

Amino Acid Sequence↗

Structural biology of the thioester-dependent degradation and synthesis of fatty acids.

The fatty acid degradation and synthesis pathways consist of the same four chemical transformations. These transformations are facilitated by conjugating the fatty acid, via a thioester bond, to coenzyme A or acyl carrier protein in, respectively, the degradation and synthesis pathways. These pathways are compartmentalized in the peroxisomes, mitochondria and cytosol of eukaryotic cells. Current structural knowledge of the enzymes comprising these pathways shows that the approximately 130 entries in the RCSB Protein Data Bank can be grouped into seven superfamilies. Multifunctional enzymes are important in both pathways.

Acyl Carrier Protein↗

High resolution crystal structures of human cytosolic thiolase (CT): a comparison of the active sites of human CT, bacterial thiolase, and bacterial KAS I.

Thiolases belong to a superfamily of condensing enzymes that includes also beta-ketoacyl acyl carrier protein synthases (KAS enzymes), involved in fatty acid synthesis. Here, we describe the high resolution structure of human cytosolic acetoacetyl-CoA thiolase (CT), both unliganded (at 2.3 angstroms resolution) and in complex with CoA (at 1.6 angstroms resolution). CT catalyses the condensation of two molecules of acetyl-CoA to acetoacetyl-CoA, which is the first reaction of the metabolic pathway leading to the synthesis of cholesterol. CT is a homotetramer of exact 222 symmetry. There is an excess of positively charged residues at the interdimer surface leading towards the CoA-binding pocket, possibly important for the efficient capture of substrates. The geometry of the catalytic site, including the three catalytic residues Cys92, His 353, Cys383, and the two oxyanion holes, is highly conserved between the human and bacterial Zoogloea ramigera thiolase. In human CT, the first oxyanion hole is formed by Wat38 (stabilised by Asn321) and NE2(His353), and the second by N(Cys92) and N(Gly385). The active site of this superfamily is constructed on top of four active site loops, near Cys92, Asn321, His353, and Cys383, respectively. These loops were used for the superpositioning of CT on the bacterial thiolase and on the Escherichia coli KAS I. This comparison indicates that the two thiolase oxyanion holes also exist in KAS I at topologically equivalent positions. Interestingly, the hydrogen bonding interactions at the first oxyanion hole are different in thiolase and KAS I. In KAS I, the hydrogen bonding partners are two histidine NE2 atoms, instead of a water and a NE2 side-chain atom in thiolase. The second oxyanion hole is in both structures shaped by corresponding main chain peptide NH-groups. The possible importance of bound water molecules at the catalytic site of thiolase for the reaction mechanism is discussed.

Acetyl-CoA C-Acetyltransferase↗

Alpha-methylacyl-CoA racemase from Mycobacterium tuberculosis. Mutational and structural characterization of the active site and the fold.

Alpha-methylacyl-CoA racemase (Amacr) catalyzes the racemization of alpha-methyl-branched CoA esters. Sequence comparisons have shown that this enzyme is a member of the family III CoA transferases. The mammalian Amacr is involved in bile acid synthesis and branched-chain fatty acid degradation. In human, mutated variants of Amacr have been shown to be associated with disease states. Amino acid sequence alignment of Amacrs and its homologues from various species revealed 26 conserved protic residues, assumed to be potential candidates as catalytic residues. Amacr from Mycobacterium tuberculosis (MCR) was taken as a representative of the racemases. To determine their importance for efficient catalysis, each of these 26 protic residues of MCR was mutated into an alanine, respectively, and the mutated variants were overexpressed in Escherichia coli. It was found that four variants (R91A, H126A, D156A, and E241A) were properly folded but had much decreased catalytic efficiency. Apparently, Arg91, His126, Asp156, and Glu241 are important catalytic residues of MCR. The importance of these residues for catalysis can be rationalized by the 1.8 A resolution crystal structure of MCR, which shows that the catalytic site is at the interface between the large and small domain of two different subunits of the dimeric enzyme. This crystal structure is the first structure of a complete enzyme of the bile acid synthesis pathway. It shows that MCR has unique structural features, not seen in the structures of the sequence related formyl-CoA transferases, suggesting that the family III CoA transferases can be subdivided in at least two classes, being racemases and CoA transferases.

Alanine↗

Structure determination and refinement at 2.44 A resolution of argininosuccinate lyase from Escherichia coli.

Escherichia coli argininosuccinate lyase has been crystallized from a highly concentrated sample of purified recombinant alpha-methylacyl-CoA racemase, in which it occurred as a minor impurity. The structure has been solved using molecular replacement at 2.44 A resolution. The enzyme is tetrameric, but in this crystal form there is a dimer in the asymmetric unit. The tetramer has four active sites; each active site is constructed from loops of three different subunits. One of these catalytic loops, near residues Ser277 and Ser278, was disordered in previous structures of active lyases, but is very well ordered in this structure in one of the subunits owing to the presence of two phosphate ions in the active-site cavity. The positions of these phosphate ions indicate a plausible mode of binding of the succinate moiety of the substrate in the competent catalytic complex.

Argininosuccinate Lyase↗

The peptide-substrate-binding domain of collagen prolyl 4-hydroxylases is a tetratricopeptide repeat domain with functional aromatic residues.

Collagen prolyl 4-hydroxylases catalyze the formation of 4-hydroxyproline in -X-Pro-Gly-sequences and have an essential role in collagen synthesis. The vertebrate enzymes are alpha2beta2 tetramers in which the catalytic alpha-subunits contain separate peptide-substrate-binding and catalytic domains. We report on the crystal structure of the peptide-substrate-binding domain of the human type I enzyme refined at 2.3 A resolution. It was found to belong to a family of tetratricopeptide repeat domains that are involved in many protein-protein interactions and consist of five alpha-helices forming two tetratricopeptide repeat motifs plus the solvating helix. A prominent feature of its concave surface is a deep groove lined by tyrosines, a putative binding site for proline-rich Tripeptides. Solvent-exposed side chains of three of the tyrosines have a repeat distance similar to that of a poly-L-proline type II helix. The aromatic surface ends at one of the tyrosines, where the groove curves almost 90 degrees away from the linear arrangement of the three tyrosine side chains, possibly inducing a bent conformation in the bound peptide. This finding is consistent with previous suggestions by others that a minimal structural requirement for proline 4-hydroxylation may be a sequence in the poly-L-proline type II conformation followed by a beta-turn in the Pro-Gly segment. Site-directed mutagenesis indicated that none of the tyrosines was critical for tetramer assembly, whereas most of them were critical for the binding of a peptide substrate and inhibitor both to the domain and the alpha2beta2 enzyme tetramer.

Amino Acid Sequence↗

The 1.3 A crystal structure of human mitochondrial Delta3-Delta2-enoyl-CoA isomerase shows a novel mode of binding for the fatty acyl group.

The crystal structure of Delta3-Delta2-enoyl-CoA isomerase from human mitochondria (hmEci), complexed with the substrate analogue octanoyl-CoA, has been refined at 1.3 A resolution. This enzyme takes part in the beta-oxidation of unsaturated fatty acids by converting both cis-3 and trans-3-enoyl-CoA esters (with variable length of the acyl group) to trans-2-enoyl-CoA. hmEci belongs to the hydratase/isomerase (crotonase) superfamily. Most of the enzymes belonging to this superfamily are hexamers, but hmEci is shown to be a trimer. The mode of binding of the ligand, octanoyl-CoA, shows that the omega-end of the acyl group binds in a hydrophobic tunnel formed by residues of the loop preceding helix H4 as well as by side-chains of the kinked helix H9. From the structure of the complex it can be seen that Glu136 is the only catalytic residue. The importance of Glu136 for catalysis is confirmed by mutagenesis studies. A cavity analysis shows the presence of two large, adjacent empty hydrophobic cavities near the active site, which are shaped by side-chains of helices H1, H2, H3 and H4. The structure comparison of hmEci with structures of other superfamily members, in particular of rat mitochondrial hydratase (crotonase) and yeast peroxisomal enoyl-CoA isomerase, highlights the variable mode of binding of the fatty acid moiety in this superfamily.

Amino Acid Sequence↗

Structural studies on delta(3)-delta(2)-enoyl-CoA isomerase: the variable mode of assembly of the trimeric disks of the crotonase superfamily.

Subunits of the enzymes in the crotonase superfamily form tight trimeric disks. In most members of this protein superfamily these disks assemble further into hexamers. Here we report on the 2.1 A structure of a tight hexameric crystal form of the yeast peroxisomal delta(3)-delta(2)-enoyl-CoA isomerase (Eci1p). A comparison of this structure to a previously solved crystal form of Eci1p and other structures of this superfamily shows that there is much variability with respect to the relative distance between the disks and their relative orientations. In particular helices H2 and H9 are involved in the inter-trimer contacts and there are considerable structural differences in these helices in this superfamily. Helices H2 and H9 are near the catalytic cavity and it is postulated that the observed structural variability of these helices, stabilized by the different modes of assembly, has allowed the evolution of the wide range of substrate and catalytic specificity within this enzyme superfamily.

Amino Acid Sequence↗

Crystallization of the proline-rich-peptide binding domain of human type I collagen prolyl 4-hydroxylase.

Collagen prolyl 4-hydroxylases catalyze the hydroxylation of -X-Pro-Gly- sequences and play an essential role in the synthesis of all collagens. They require Fe(2+), 2-oxoglutarate, molecular oxygen and ascorbate, and all vertebrate collagen prolyl 4-hydroxylases are alpha(2)beta(2) tetramers. The alpha-subunits contain separate catalytic and peptide substrate-binding domains. Here, the crystallization of the peptide substrate-binding domain consisting of residues 144-244 of the 517-residue human alpha(I) subunit is described. The crystals are well ordered and diffract to at least 3 A. The space group is P3(1) or P3(2) and the asymmetric unit most probably contains a dimer.

Collagen Type I↗

Structure-function analysis of enoyl thioester reductase involved in mitochondrial maintenance.

Candida tropicalis enoyl thioester reductase Etr1p and the Saccharomyces cerevisiae homologue Mrf1p catalyse the NADPH-dependent reduction of trans-2-enoyl thioesters in mitochondrial fatty acid synthesis (FAS). Unlike prokaryotic enoyl thioester reductases (ETRs), which belong to the short-chain dehydrogenases/reductases (SDR), Etr1p and Mrf1p represent structurally distinguishable ETRs that belong to the medium-chain dehydrogenases/reductases (MDR) superfamily, indicating independent origin of two separate classes of ETRs. The crystal structures of Etr1p, the Etr1p-NADPH complex and the Etr1Y79Np mutant were refined to 1.70A, 2.25A and 2.60A resolution, respectively. The native fold of Etr1p was maintained in Etr1Y79Np, but the mutant had only 0.1% of Etr1p catalytic activity remaining and failed to rescue the respiratory deficient phenotype of the mrf1Delta strain. Mutagenesis of Tyr73 in Mrf1p, corresponding to Tyr79 in Etr1p, produced similar results. Our data indicate that the mitochondrial reductase activity is indispensable for respiratory function in yeast, emphasizing the significance of Mrf1p (Etr1p) and mitochondrial FAS for the integrity of the respiratory competent organelle.

Amino Acid Sequence↗

Crystallization and preliminary X-ray diffraction studies of an alpha-methylacyl-CoA racemase from Mycobacterium tuberculosis.

alpha-Methylacyl-CoA racemase is a key enzyme in the metabolism of 2-methyl-branched fatty acids and, in mammals, in the conversion of cholesterol to bile acids. The enzyme from Mycobacterium tuberculosis has been purified to homogeneity and crystallized by the hanging-drop vapour-diffusion method. The crystals of the unliganded racemase belong to space group P6(1)22 or P6(5)22, with unit-cell parameters a = b = 122.0, c = 256.4 A. Data sets were collected at 100 K. The crystals diffract to 2.8 A using synchrotron radiation.

Amino Acid Sequence↗

Crystal structure of triosephosphate isomerase complexed with 2-phosphoglycolate at 0.83-A resolution.

The atomic resolution structure of Leishmania mexicana triosephosphate isomerase complexed with 2-phosphoglycolate shows that this transition state analogue is bound in two conformations. Also for the side chain of the catalytic glutamate, Glu(167), two conformations are observed. In both conformations, a very short hydrogen bond exists between the carboxylate group of the ligand and the catalytic glutamate. The distance between O11 of PGA and Oepsilon2 of Glu(167) is 2.61 and 2.55 A for the major and minor conformations, respectively. In either conformation, Oepsilon1 of Glu(167) is hydrogen-bonded to a water network connecting the side chain with bulk solvent. This network also occurs in two mutually exclusive arrangements. Despite the structural disorder in the active site, the C termini of the beta strands that construct the active site display the least anisotropy compared with the rest of the protein. The loops following these beta strands display various degrees of anisotropy, with the tip of the dimer interface loop 3 having very low anisotropy and the C-terminal region of the active site loop 6 having the highest anisotropy. The pyrrolidine ring of Pro(168) at the N-terminal region of loop 6 is in a strained planar conformation to facilitate loop opening and product release.

Animals↗

The biochemistry of peroxisomal beta-oxidation in the yeast Saccharomyces cerevisiae.

Peroxisomal fatty acid degradation in the yeast Saccharomyces cerevisiae requires an array of beta-oxidation enzyme activities as well as a set of auxiliary activities to provide the beta-oxidation machinery with the proper substrates. The corresponding classical and auxiliary enzymes of beta-oxidation have been completely characterized, many at the structural level with the identification of catalytic residues. Import of fatty acids from the growth medium involves passive diffusion in combination with an active, protein-mediated component that includes acyl-CoA ligases, illustrating the intimate linkage between fatty acid import and activation. The main factors involved in protein import into peroxisomes are also known, but only one peroxisomal metabolite transporter has been characterized in detail, Ant1p, which exchanges intraperoxisomal AMP with cytosolic ATP. The other known transporter is Pxa1p-Pxa2p, which bears similarity to the human adrenoleukodystrophy protein ALDP. The major players in the regulation of fatty acid-induced gene expression are Pip2p and Oaf1p, which unite to form a transcription factor that binds to oleate response elements in the promoter regions of genes encoding peroxisomal proteins. Adr1p, a transcription factor, binding upstream activating sequence 1, also regulates key genes involved in beta-oxidation. The development of new, postgenomic-era tools allows for the characterization of the entire transcriptome involved in beta-oxidation and will facilitate the identification of novel proteins as well as the characterization of protein families involved in this process.

Enzymes↗

The catalytic cycle of biosynthetic thiolase: a conformational journey of an acetyl group through four binding modes and two oxyanion holes.

Biosynthetic thiolase catalyzes the formation of acetoacetyl-CoA from two molecules of acetyl-CoA. This is a key step in the synthesis of many biological compounds, including steroid hormones and ketone bodies. The thiolase reaction involves two chemically distinct steps; during acyl transfer, an acetyl group is transferred from acetyl-CoA to Cys89, and in the Claisen condensation step, this acetyl group is further transferred to a second molecule of acetyl-CoA, generating acetoacetyl-CoA. Here, new crystallographic data for Zoogloea ramigera biosynthetic thiolase are presented, covering all intermediates of the thiolase catalytic cycle. The high-resolution structures indicate that the acetyl group goes through four conformations while being transferred from acetyl-CoA via the acetylated enzyme to acetoacetyl-CoA. This transfer is catalyzed in a rigid cavity lined by mostly hydrophobic side chains, in addition to the catalytic residues Cys89, His348, and Cys378. The structures highlight the importance of an oxyanion hole formed by a water molecule and His348 in stabilizing the negative charge on the thioester oxygen atom of acetyl-CoA at two different steps of the reaction cycle. Another oxyanion hole, composed of the main chain nitrogen atoms of Cys89 and Gly380, complements a negative charge of the thioester oxygen anion of the acetylated intermediate, stabilizing the tetrahedral transition state of the Claisen condensation step. The reactivity of the active site may be modulated by hydrogen bonding networks extending from the active site toward the back of the molecule.

Acetyl-CoA C-Acetyltransferase↗