PubMed Health⌕ Search

Biomedical subjects

Robbert Duchateau

Publications and source records attributed to Robbert Duchateau.

10 recordsLinked to original sources
PubMed2006

Role of the metal oxidation state in the SNS-Cr catalyst for ethylene trimerization: isolation of di- and trivalent cationic intermediates.

The reaction of the highly selective [CySCH2CH2N(H)CH2CH2SCy]CrCl3 catalyst precursor with alkyl aluminum activators was examined with the aim of isolating reactive intermediates. Reaction with Me3Al afforded a cationic trivalent chromium alkyl species {[CySCH2CH2N(H)CH2CH2SCy]CrMe(mu-Cl)}2{(AlMe3)2(m-Cl}2.(C7H8)2 (1a). Although it was not possible to obtain crystalline samples of sufficient quality from the reaction with MAO (the most preferred activator), the near-to-identical EPR spectra indicated a very close structural similarity with 1a. Ethylene oligomerization tests clearly revealed that 1 and other cationic trivalent dimeric complexes {[CySCH2CH2N(H)CH2CH2SCy] CrCl(mu-Cl)}2{AlCl4}2.(C7H8)1.5 (2), monomeric [(CySCH2CH2N(H)CH2CH2SCy)CrCl2 (THF)][AlCl4] (3), and {[CySCH2CH2N(H)CH2CH2SCy]Cr(eta2-AlCl4)}{Al2Cl7} (4) adducts display the same catalyst selectivity as the [CySCH2CH2N(H)CH2CH2SCy]CrCl3 complex and, therefore, are probably all precursors to the same catalytically active species. 2, 3, and 4 were obtained upon treatment of [CySCH2CH2N(H)CH2CH2SCy] CrCl3 with different stoichiometric ratios of AlCl3.. When i-BAO activator was used, reduction of the metal center occurred readily, affording {([CySCH2CH2N(H)CH2CH2S Cy]Cr)(mu-Cl)]2}{(i-Bu)2AlCl2}2 (5). 5 is also a selective catalyst, thus indicating that trivalent species are most probably precursors to a divalent catalytically active complex. Reaction of CrCl2(THF)2 with the ligand afforded the labile divalent adduct [CySCH2CH2N(H)CH2CH2SCy]CrCl2(THF) (6), also catalytically active and selective. Instead, deprotonation of the ligand with n-BuLi followed by reaction with CrCl2(THF)2 gave the dinuclear complex [(mu-CySCH2CH2NCH2CH2SCy)CrCl]2 (7), which did not produce oligomers.

Journal Article↗
PubMed2006

Topology characterization by MALDI-ToF-MS of enzymatically synthesized poly(lactide-co-glycolide).

Lipase catalyzed copolymerization of the monomers lactide and glycolide by Pseudomonas cepacia employing a molar ratio of 80L/20G has been studied. The copolymers were characterized by MALDI-ToF-MS, DSC, SEC and NMR. MALDI-ToF-MS has successfully been used not only to determine end groups and chemical composition but even the microstructure of the copolymers. We demonstrated that for this lipase catalyzed copolymerization, the main product of the reaction at 100 degrees C was linear homopolymer of lactide while at 130 degrees C the main product was cyclic random copolymer.

Biocompatible Materials↗
PubMed2006

Co- and terpolyesters based on isosorbide and succinic acid for coating applications: synthesis and characterization.

Co- and terpolyesters based on succinic acid and isosorbide in combination with other renewable monomers such as 2,3-butanediol, 1,3-propanediol, and citric acid were synthesized and characterized. Linear polyesters were obtained via melt polycondensation of nonactivated dicarboxylic acids with OH functional monomers. Polymer end functionality (i.e., hydroxyl or carboxylic acid) was controlled by adjusting the monomer stoichiometry. The glass transition temperatures of the resulting polyesters could be effectively adjusted by varying the polymer composition and molar mass. By adding polyfunctional monomers such as trimethylolpropane or citric acid, polyesters with enhanced functionality were obtained. These biobased polyesters displayed functionalities and Tg values in the appropriate range for (powder) coating applications. The polyesters were cross-linked using conventional curing agents. Coatings from branched polyesters--hydroxyl as well as acid functional--showed significantly improved mechanical and chemical resistance compared to those formulated from linear polymers. These renewable polyesters proved to be suitable materials for coating applications with respect to solvent resistance, impact resistance, and hardness.

Butylene Glycols↗
PubMed2004

Silsesquioxane models for silica surface silanol sites with adjacent siloxide functionalites and olefin polymerization catalysts thereof.

Incompletely condensed silsesquioxanes of the type R7Si7O9(O[SiR'2O]n)OH (R = c-C5H9, c-C6H11; R' = Me, Ph; n = 1-4), containing a siloxane ring of variable size and rigidity and a remaining silanol, are described. Compared with a truly isolated silanol [R7Si8O12(OH)], solution and solid state FT-IR spectra of these compounds show a nu(OH) shift of approximately 150 cm(-1) to lower frequency, which suggests hydrogen bonding of the silanol with the internal siloxane ring. In agreement with this, the relative ion pair acidities of the silanols in THF, determined by UV/Vis, were lowered by 0.8-1.2 compared with a truly isolated silanol. Density functional theory (DFT) calculations on these systems confirm the presence of intramolecular hydrogen bonding. Possible interaction of the silyl ether functionalities with Lewis acidic metal sites was studied for the neutral gallium-substituted systems and cationic titanium silsesquioxane complexes, models for an immobilized titanium olefin polymerization catalyst. The electron donating capability of the siloxide functionalities in 1, 6, and 7 is not sufficient to satisfy the electron deficiency of the corresponding gallium silsesquioxane species, which form dimeric structures with a bridging siloxide unit rather than Lewis base adducts with coordinated siloxide functionalities. Metallation of 1 and 4 with [Cp"Ti(CH2Ph)3] (Cp" = eta5-1,3-C5H3(SiMe3)2) in a 1:1 ratio afforded monomeric titanasilsesquioxanes. To probe the effect of the neighboring siloxane ring on the highly Lewis acidic titanium center, the catalytic activities of the corresponding cationic half-sandwich complexes were tested in 1-hexene polymerization. Compared with the catalyst system based on the isolated silanol [(c-C5H9)7Si8O12OH], the presence of a neighboring siloxane ring causes considerable retardation of the polymerization process but also improves the stability of the catalyst.

Alkenes↗
PubMed2004

Synthesis and characterization of tin containing polyhedral oligometallasilsesquioxanes (POMSS).

Tin silicate species have shown good catalytic activity in various oxidation reactions. In an attempt to mimic surface tin species, several tin containing silsesquioxanes have been synthesized. Incompletely condensed silsesquioxanes (c-C5H9)7Si7O9(OH)3 and (c-C5H9)7Si7O9(OSiMe3)(OH)2 were reacted with common tin-precursors, which afforded several silsesquioxane ligated tin compounds. Divalent stannasilsesquioxanes form dimers of the type [(c-C5H9)7Si7O11(OX)Sn]2(X=H, SiMe3) with three-coordinated tin centers. The three-coordinated tin(II) are hydrolytically unstable whereas the octahedrally surrounded tetravalent stannasilsesquioxanes [(c-C5H9)7Si7O11(OX)]Sn(acac)2(X=H, OSiMe3) are hydrolytically robust. An unprecedented anionic trimeric cluster, [[(c-C5H9)7Si7O12Sn]3(mu2-OH)3(mu3-OH)]-[HNEt3]+, stabilized by bridging hydroxyl groups was formed when the product formed upon reacting (c-C5H9)7Si7O9(OH)3 with SnCl4 was slowly hydrolyzed. The stannasilsesquioxanes showed no catalytic activity in oxidation reactions.

Journal Article↗
PubMed2002

Silsesquioxane models for geminal silica surface silanol sites. A spectroscopic investigation of different types of silanols.

The incompletely condensed monosilylated silsesquioxanes (c-C5H9)7Si7O9(OSiRR'2)(OH)2 (SiRR'2 = SiMe3, SiMe2C(H)CH2, SiMePh2) were reacted with SiCl(4) in the presence of an amine which yielded the dichloro compounds (c-C5H9)7Si7O9(OSiRR'2)O2SiCl2 (1-3). These compounds could be hydrolyzed into the corresponding silsesquioxanes containing geminal silanols, (c-C5H9)7Si7O9(OSiRR'2)O2Si(OH)2 (4-6). At elevated temperatures, the geminal silsesquioxanes 4 and 5 undergo condensation reactions and form the closed-cage silsesquioxane monosilanol, (c-C5H9)7Si8O12(OH). The more sterically hindered geminal silsesquioxane 6 undergoes in solution intermolecular dehydroxylation, yielding the thermodynamically stable dimeric disilanol, [(c-C5H9)7Si7O9(OSiMePh2)(O2Si(OH)-)]2-(mu-O) (7). NMR and FT-IR studies show that the two silanols of the geminal silsesquioxanes 4-6 are different from each other with respect to hydrogen bonding, both in solution and in the solid state. Hydrogen bonding of the geminal silanol-containing silsesquioxanes was examined and compared to hydrogen bonding in silsesquioxanes possessing vicinal or isolated silanol groups. The relative Brønsted acidity of the geminal silanols was determined using pK(ip) (ion-pair acidity) measurements in THF with UV-vis. These acidities were compared with those of other silsesquioxanes containing silanol groups. Acidities of 4-6 were found to be among the lowest known for silsesquioxanes.

Journal Article↗