PubMed Health⌕ Search

Biomedical subjects

Robert C Liddington

Publications and source records attributed to Robert C Liddington.

At least 19 recordsLinked to original sources

Structural basis of integrin activation by talin.

Regulation of integrin affinity (activation) is essential for metazoan development and for many pathological processes. Binding of the talin phosphotyrosine-binding (PTB) domain to integrin beta subunit cytoplasmic domains (tails) causes activation, whereas numerous other PTB-domain-containing proteins bind integrins without activating them. Here we define the structure of a complex between talin and the membrane-proximal integrin beta3 cytoplasmic domain and identify specific contacts between talin and the integrin tail required for activation. We used structure-based mutagenesis to engineer talin and beta3 variants that interact with comparable affinity to the wild-type proteins but inhibit integrin activation by competing with endogenous talin. These results reveal the structural basis of talin's unique ability to activate integrins, identify an interaction that could aid in the design of therapeutics to block integrin activation, and enable engineering of cells with defects in the activation of multiple classes of integrins.

Amino Acid Sequence↗

Expression and purification of a two-component flaviviral proteinase resistant to autocleavage at the NS2B-NS3 junction region.

Regulated proteolysis of the polyprotein precursor of West Nile virus (WNV) by the essential NS2B-NS3(pro)tease, a promising drug target for WNV inhibitors, is required for the propagation of infectious virions. Structural and drug design studies, however, require pilot-scale quantities of a pure and catalytically active WNV protease that is resistant to self-proteolysis. Autolytic cleavage at the NS2B-NS3 boundary leads to individual, non-covalently associated, NS2B and NS3 domains, together with residual amounts of the intact NS2B-NS3, in the NS2B-NS3pro samples. We modified the cleavage site sequence of the NS2B-NS3 junction region and then developed expression and purification procedures to prepare a covalently linked, single-chain, NS2B-NS3pro K48A mutant construct. This construct exhibits high stability and functional activity and is thus well suited for the follow-up purification and structural and drug design studies.

Amino Acid Motifs↗

Vaccinia virus N1L protein resembles a B cell lymphoma-2 (Bcl-2) family protein.

Poxviruses encode immuno-modulatory proteins capable of subverting host defenses. The poxvirus vaccinia expresses a small 14-kDa protein, N1L, that is critical for virulence. We report the crystal structure of N1L, which reveals an unexpected but striking resemblance to host apoptotic regulators of the B cell lymphoma-2 (Bcl-2) family. Although N1L lacks detectable Bcl-2 homology (BH) motifs at the sequence level, we show that N1L binds with high affinity to the BH3 peptides of pro-apoptotic Bcl-2 family proteins in vitro, consistent with a role for N1L in modulating host antiviral defenses.

Amino Acid Sequence↗

Structural basis of neutralization by a human anti-severe acute respiratory syndrome spike protein antibody, 80R.

Severe acute respiratory syndrome (SARS) is a newly emerged infectious disease that caused pandemic spread in 2003. The etiological agent of SARS is a novel coronavirus (SARS-CoV). The coronaviral surface spike protein S is a type I transmembrane glycoprotein that mediates initial host binding via the cell surface receptor angiotensin-converting enzyme 2 (ACE2), as well as the subsequent membrane fusion events required for cell entry. Here we report the crystal structure of the S1 receptor binding domain (RBD) in complex with a neutralizing antibody, 80R, at 2.3 A resolution, as well as the structure of the uncomplexed S1 RBD at 2.2 A resolution. We show that the 80R-binding epitope on the S1 RBD overlaps very closely with the ACE2-binding site, providing a rationale for the strong binding and broad neutralizing ability of the antibody. We provide a structural basis for the differential effects of certain mutations in the spike protein on 80R versus ACE2 binding, including escape mutants, which should facilitate the design of immunotherapeutics to treat a future SARS outbreak. We further show that the RBD of S1 forms dimers via an extensive interface that is disrupted in receptor- and antibody-bound crystal structures, and we propose a role for the dimer in virus stability and infectivity.

Antibodies, Viral↗

The structure and regulation of vinculin.

Vinculin is a ubiquitously expressed actin-binding protein frequently used as a marker for both cell-cell and cell-extracellular matrix (focal adhesion) adherens-type junctions, but its function has remained elusive. Vinculin is made up of a globular head linked to a tail domain by a short proline-rich sequence, and an intramolecular interaction between the head and tail masks the numerous ligand-binding sites in the protein. Determination of the crystal structure of vinculin has shed new light on the way that these ligand-binding sites are regulated. The picture that emerges is one in which vinculin stabilizes focal adhesions and thereby suppresses cell migration, an effect that is relieved by transient changes in the local concentrations of inositol phospholipids. However, the finding that vinculin modulates the signalling pathways involved in apoptosis suggests that additional roles for vinculin remain to be discovered.

Animals↗

A structural rationale for SV40 Vp1 temperature-sensitive mutants and their complementation.

Two groups of temperature-sensitive (ts) mutants, termed ts B and ts C, have mutations in the major capsid protein of SV40, Vp1. These mutants have virion assembly defects at the nonpermissive temperature, but can complement one another when two mutants, one from each group, coinfect a cell. A third group of mutants, termed ts BC, have related phenotypes, but do not complement other mutants. We found that the mutations fall into two structural and functional classes. All ts C and one ts BC mutations map to the region close to the Ca2+ binding sites, and are predicted to disrupt the insertion of the distal part of the C-terminal invading arm (C-arm) into the receiving clamp. They share a severe defect in assembly at the nonpermissive temperature, with few capsid proteins attached to the viral minichromosome. By contrast, all ts B and most ts BC mutations map to a contiguous region including acceptor sites for the proximal part of the C-arm and intrapentamer contacts. These mutants form assembly intermediates that carry substantial capsid proteins on the minichromosome. Thus, accurate virion assembly is prevented by mutations that disrupt interactions between the receiving pentamer and both the proximal and distal parts of the C-arms, with the latter having a greater effect. The distinct spatial localization and assembly defects of the two classes of mutants provide a rationale for their intracistronic complementation and suggest models of capsid assembly.

Binding Sites↗

Role of vinculin in regulating focal adhesion turnover.

Although vinculin (-/-) mouse embryo fibroblasts assemble focal adhesions (FAs), they spread more slowly, less extensively, and close a wound more rapidly than vinculin (+/+) cells. To investigate the structure and dynamics of FAs in these cells, we used real-time interference reflection microscopy (IRM) thus avoiding the need to express exogenous GFP-tagged FA proteins which may be misregulated. This showed that the FAs were smaller, less abundant and turned over more rapidly in vinculin null compared to wild-type cells. Expression of vinculin rescued the spreading defect and resulted in larger and more stable FAs. Phosphatidylinositol 4,5-bisphosphate (PIP2) is thought to play a role in vinculin activation by relieving an intramolecular association between the vinculin head (Vh) and tail (Vt) that masks the ligand binding sites in Vh and Vt. To investigate the role of the vinculin/PIP2 interaction in FA dynamics, we used a vinculin mutant lacking the C-terminal arm (residues 1053-1066) and referred to as the deltaC mutation. This mutation reduced PIP2 binding to a Vt deltaC polypeptide by >90% compared to wild type without affecting binding to Vh or F-actin. Interestingly, cells expressing the vinculin deltaC mutant assembled remarkably stable FAs. The results suggest that vinculin inhibits cell migration by stabilising FAs, and that binding of inositol phospholipids to Vt plays an important role in FA turnover.

Animals↗

Structure of the alpha-actinin-vinculin head domain complex determined by cryo-electron microscopy.

The vinculin binding site on alpha-actinin was determined by cryo-electron microscopy of 2D arrays formed on phospholipid monolayers doped with a nickel chelating lipid. Chicken smooth muscle alpha-actinin was cocrystallized with the beta1-integrin cytoplasmic domain and a vinculin fragment containing residues 1-258 (vinculin(D1)). Vinculin(D1) was located at a single site on alpha-actinin with 60-70% occupancy. In these arrays, alpha-actinin lacks molecular 2-fold symmetry and the two ends of the molecule, which contain the calmodulin-like and actin binding domains, are held in distinctly different environments. The vinculin(D1) difference density has a shape very suggestive of the atomic structure. The atomic model of the complex juxtaposes the alpha-actinin binding site on vinculin(D1) with the N-terminal lobe of the calmodulin-like domain on alpha-actinin. The results show that the interaction between two species with weak affinity can be visualized in a membrane-like environment.

Actinin↗

The activity of the vinculin binding sites in talin is influenced by the stability of the helical bundles that make up the talin rod.

The talin rod contains approximately 11 vinculin binding sites (VBSs), each defined by hydrophobic residues in a series of amphipathic helices that are normally buried within the helical bundles that make up the rod. Consistent with this, talin failed to compete for binding of the vinculin Vd1 domain to an immobilized talin polypeptide containing a constitutively active VBS. However, talin did bind to GST-Vd1 in pull-down assays, and isothermal titration calorimetry measurements indicate a K(d) of approximately 9 mum. Interestingly, Vd1 binding exposed a trypsin cleavage site in the talin rod between residues 898 and 899, indicating that there are one or more active VBSs in the N-terminal part of the talin rod. This region comprises a five helix bundle (residues 482-655) followed by a seven-helix bundle (656-889) and contains five VBSs (helices 4, 6, 9, 11, and 12). The single VBS within 482-655 is cryptic at room temperature. In contrast, talin 482-889 binds Vd1 with high affinity (K(d) approximately 0.14 mum), indicating that one or more of the four VBSs within 656-889 are active, and this likely represents the vinculin binding region in intact talin. In support of this, hemagglutinin-tagged talin 482-889 localized efficiently to focal adhesions, whereas 482-655 did not. Differential scanning calorimetry showed a strong negative correlation between Vd1 binding and helical bundle stability, and a 755-889 mutant with a more stable fold bound Vd1 much less well than wild type. We conclude that the stability of the helical bundles that make up the talin rod is an important factor determining the activity of the individual VBSs.

Animals↗

Structure and lytic activity of a Bacillus anthracis prophage endolysin.

We report a structural and functional analysis of the lambda prophage Ba02 endolysin (PlyL) encoded by the Bacillus anthracis genome. We show that PlyL comprises two autonomously folded domains, an N-terminal catalytic domain and a C-terminal cell wall-binding domain. We determined the crystal structure of the catalytic domain; its three-dimensional fold is related to that of the cell wall amidase, T7 lysozyme, and contains a conserved zinc coordination site and other components of the catalytic machinery. We demonstrate that PlyL is an N-acetylmuramoyl-L-alanine amidase that cleaves the cell wall of several Bacillus species when applied exogenously. We show, unexpectedly, that the catalytic domain of PlyL cleaves more efficiently than the full-length protein, except in the case of Bacillus cereus, and using GFP-tagged cell wall-binding domain, we detected strong binding of the cell wall-binding domain to B. cereus but not to other species tested. We further show that a related endolysin (Ply21) from the B. cereus phage, TP21, shows a similar pattern of behavior. To explain these data, and the species specificity of PlyL, we propose that the C-terminal domain inhibits the activity of the catalytic domain through intramolecular interactions that are relieved upon binding of the C-terminal domain to the cell wall. Furthermore, our data show that (when applied exogenously) targeting of the enzyme to the cell wall is not a prerequisite of its lytic activity, which is inherently high. These results may have broad implications for the design of endolysins as therapeutic agents.

Amidohydrolases↗

Structural analysis of Siah1-Siah-interacting protein interactions and insights into the assembly of an E3 ligase multiprotein complex.

Siah1 is the central component of a multiprotein E3 ubiquitin ligase complex that targets beta-catenin for destruction in response to p53 activation. The E3 complex comprises, in addition to Siah1, Siah-interacting protein (SIP), the adaptor protein Skp1, and the F-box protein Ebi. Here we show that SIP engages Siah1 by means of two elements, both of which are required for mediating beta-catenin destruction in cells. An N-terminal dimerization domain of SIP sits across the saddle-shaped upper surface of Siah1, with two extended legs packing against the sides of Siah1 by means of a consensus PXAXVXP motif that is common to a family of Siah-binding proteins. The C-terminal domain of SIP, which binds to Skp1, protrudes from the lower surface of Siah1, and we propose that this surface provides the scaffold for bringing substrate and the E2 enzyme into apposition in the functional complex.

Calcium-Binding Proteins↗

Efficient synthetic inhibitors of anthrax lethal factor.

Inhalation anthrax is a deadly disease for which there is currently no effective treatment. Bacillus anthracis lethal factor (LF) metalloproteinase is an integral component of the tripartite anthrax lethal toxin that is essential for the onset and progression of anthrax. We report here on a fragment-based approach that allowed us to develop inhibitors of LF. The small-molecule inhibitors we have designed, synthesized, and tested are highly potent and selective against LF in both in vitro tests and cell-based assays. These inhibitors do not affect the prototype human metalloproteinases that are structurally similar to LF. Initial in vivo evaluation of postexposure efficacy of our inhibitors combined with antibiotic ciprofloxacin against B. anthracis resulted in significant protection. Our data strongly indicate that the scaffold of inhibitors we have identified is the foundation for the development of novel, safe, and effective emergency therapy of postexposure inhalation anthrax.

Animals↗

Two-wavelength MAD phasing and radiation damage: a case study.

Radiation damage affects MAD experiments in two ways: (i) increased absorption by the crystal at the wavelengths of interest for the experiment results in faster crystal deterioration; (ii) lack of isomorphism induced by radiation damage causes problems when scaling and merging data at different wavelengths and can prevent accurate measurement of anomalous and dispersive differences. In an attempt to overcome these problems in the case of radiation-sensitive crystals of vinculin, two-wavelength MAD data were collected at the Se absorption-edge inflection and at high-energy remote wavelengths. Although this strategy resulted in a lower total absorbed dose compared with a standard three-wavelength experiment using the peak wavelength, an increase in the unit-cell volume and other effects attributable to radiation damage were still observed. In an effort to extract the maximum information available from the data, different data-processing and scaling procedures were compared. Scaling approaches involving local scaling of unmerged reflections were consistently successful and most ordered Se sites could be located. Subsequent use of these sites for phasing resulted in an interpretable electron density map. This case demonstrates the feasibility of two-wavelength MAD in the presence of moderate radiation damage using conventional data collection strategies and widely available standard software.

Crystallization↗

The snake venom protein botrocetin acts as a biological brace to promote dysfunctional platelet aggregation.

Botrocetin is a snake venom protein that enhances the affinity of the A1 domain of plasma von Willebrand factor (vWF) for the platelet receptor glycoprotein Ibalpha (GPIbalpha), an event that contributes to bleeding and host death. Here we describe a kinetic and crystallographic analysis of this interaction that reveals a novel mechanism of affinity enhancement. Using high-temporal-resolution microscopy, we show that botrocetin decreases the GPIbalpha off-rate two-fold in both human and mouse complexes without affecting the on-rate. The key to this behavior is that, upon binding of GPIbalpha to vWF-A1, botrocetin prebound to vWF-A1 makes no contacts initially with GPIbalpha, but subsequently slides around the A1 surface to form a new interface. This two-step mechanism and flexible coupling may prevent adverse alterations in on-rate of GPIbalpha for vWF-A1, and permit adaptation to structural differences in GPIbalpha and vWF in several prey species.

Amino Acid Sequence↗

Structural basis for phosphatidylinositol phosphate kinase type Igamma binding to talin at focal adhesions.

The cytoskeletal protein talin binds to a short C-terminal sequence in phosphatidylinositol phosphate kinase type Igamma (PIPKIgamma), activating the enzyme and promoting the local production of phosphatidylinositol 4,5 bisphosphate, which regulates focal adhesion dynamics as well as clathrin-mediated endocytosis in neuronal cells. Here we show by crystallographic, NMR, and calorimetric analysis that the phosphotyrosine binding (PTB)-like domain of talin engages the PIPKIgamma C terminus in a mode very similar to that of integrin binding. However, PIPKIgamma binds in the canonical PTB-peptide mode with an SPLH motif replacing the classic NPXY motif. The tighter packing of the SPLH motif against the hydrophobic core of talin may explain the stronger binding of PIPKIgamma. Two tyrosine residues flanking the SPLH motif (Tyr-644 and Tyr-649) have been implicated in the regulation of talin binding. We show that phosphorylation at Tyr-644, a Src phosphorylation site in vivo, has little effect on the binding mode or strength, which is consistent with modeling studies in which the phosphotyrosine makes surface-exposed salt bridges, and we suggest that its strong activating effect arises from the release of autoinhibitory restraints in the full-length PIPKIgamma. Modeling studies suggest that phosphorylation of Tyr-649 will likewise have little effect on talin binding, whereas phosphorylation of the SPLH serine is predicted to be strongly disruptive. Our data are consistent with the proposal that Src activity promotes a switch from integrin binding to PIPKIgamma binding that regulates focal adhesion turnover.

Amino Acid Motifs↗

Characterization of an actin-binding site within the talin FERM domain.

Talin is a large cytoskeletal protein that couples integrins to F-actin. Three actin-binding sites (ABS1-3) have been reported: one in the N-terminal head, and two in the C-terminal rod domain. Although the C-terminal ABS3 has been partially characterized, the presence and properties of ABS1 within the talin head are less well defined. We show here that the talin head binds F-actin in vitro and in vivo at a specific site within the actin filament. Thus, purified talin head liberated from gizzard talin by calpain cleavage cosediments with F-actin in a low salt buffer at pH 6.4 (conditions that are optimal for binding intact talin), and using recombinant polypeptides, we have mapped ABS1 to the FERM domain within the talin head. Both the F2 and F3 FERM subdomains contribute to binding, and EGFP-tagged FERM subdomains colocalize with actin stress fibers when expressed in COS cells. High-resolution electron microscopy of actin filaments decorated with F2F3 localizes binding to a site that is distinct from that recognized by members of the calponin-homology superfamily. Finally, we show that the FERM domain can couple F-actin to PIPkin, and by inference to integrins, since they bind to the same pocket in the F3 subdomain. This suggests that the talin FERM domain functions as a linker between PIPkin or integrins and F-actin at sites of cell-matrix adhesions.

Actins↗

Determinants of retinoid X receptor transcriptional antagonism.

The synthesis and bioactivity of the retinoid X receptor (RXR) antagonist 4-[(3'-n-butyl-5',6',7',8'-tetrahydro-5',5',8',8'-tetramethyl-2'-naphthalenyl)(cyclopropylidene)methyl]benzoic acid and several heteroatom-substituted analogues are described. Ligand design was based on the scaffold of the 3'-methyl RXR-selective agonist analogue and reports that 3'-n-propyl and longer n-alkyl groups conferred RXR antagonism. The transcriptional antagonism of the 3'-n-butyl analogue was demonstrated by its blockade of retinoic acid receptor (RAR) beta expression induced by the RXRalpha/peroxisome proliferator-activated receptor (PPAR) gamma heterodimer complexed with an RXRalpha agonist plus the PPARgamma agonist ciglitazone and the inhibition of 9-cis-RA-induced coactivator SRC-1a recruitment to RXRalpha. Receptor-ligand docking studies using full-atom flexible ligand and flexible receptor suggested that binding of the antagonist to the RXRalpha antagonist conformation was favored because the salt bridge that formed between the retinoid carboxylate and the RXRalpha helix H5 arginine-321 was far stronger than that formed on its binding to the agonist conformation. The antagonist also blocked activation of RAR subtypes alpha and beta by 9-cis-RA but not that of RARgamma.

Benzoates↗