PubMed Health⌕ Search

Biomedical subjects

Robert E Guldberg

Publications and source records attributed to Robert E Guldberg.

At least 19 recordsLinked to original sources

In vitro and in vivo osteoblastic differentiation of BMP-2- and Runx2-engineered skeletal myoblasts.

Genetic engineering with osteogenic factors is a promising approach for cell-based therapeutics and orthopedic regeneration. However, the relative efficacy of different strategies for inducing osteoblastic differentiation remains unclear and is further complicated by varied delivery vehicles, cell types, and evaluation criteria. In order to elucidate the effects of distinct gene-based strategies, we quantitatively evaluated osteoblastic differentiation and mineralization of primary skeletal myoblasts overexpressing either the BMP-2 growth factor or Runx2 transcription factor. Retroviral delivery of BMP-2 or Runx2 stimulated differentiation into an osteoblastic phenotype, as demonstrated by the induction of osteogenic gene expression, alkaline phosphatase activity, and matrix mineralization in monolayer culture and on collagen scaffolds both in vitro and in an intramuscular site in vivo. In general, BMP-2 stimulated osteoblastic markers faster and to a greater extent than Runx2, although we also identified experimental conditions under which these two factors produced similar effects. Additionally, Runx2-engineered cells did not utilize paracrine signaling via secreted osteogenic factors, in contrast to cells overexpressing BMP-2, as demonstrated by conditioned media studies and activation of Smad signaling. These results emphasize the complexity of gene therapy-based orthopedic therapeutics as an integrated relationship of differentiation state, construct maturation, and paracrine signaling of osteogenic cells. This study is significant in evaluating proposed therapeutic systems and defining a successful strategy for integrating gene medicine and orthopedic regeneration.

Animals↗

Quantitative volumetric analysis of cardiac morphogenesis assessed through micro-computed tomography.

We present a method to generate quantitative embryonic cardiovascular volumes at extremely high resolution without tissue shrinkage using micro-computed tomography (Micro-CT). A CT dense polymer (Microfil, Flow Tech, Inc.) was used to perfuse avian embryonic hearts from Hamburger and Hamilton stage (HH) 15 through HH36, which solidified to create a cast within the luminal space. Hearts were then scanned at 10.5 mum(3) voxel resolution using a VivaCT scanner, digital slices were contoured for regions of interest, and computational analysis was conducted to quantify morphogenetic parameters. The three-dimensional morphology was compared with that of scanning electron microscopy (SEM) images and serial section reconstruction of similarly staged hearts. We report that Microfil-perfused hearts swelled to maximum end-diastolic volume with negligible shrinking after polymerization. Comparison to SEM revealed good agreement of cardiac chamber proportions and intracardiac tissue structures (i.e., valves and septa) at the stages of development assessed. Quantification of changes in chamber volume over development revealed several notable results that confirm earlier hypotheses. Heart chamber volumes grow over two orders of magnitude during the 1-week developmental period analyzed. The atrioventricular canal comprised a significant proportion of the early heart volume. While left atrium/left ventricular volume ratios approached 1 in later development, right atrium/right ventricle ratios increase to over 2.5. Quantification of trabeculation patterns confirmed that the right and left ventricles are similarly trabeculated before HH27, after which the right ventricle became quantitatively coarser than that of the left ventricle. These results demonstrate that Micro-CT can be used to image and quantify cardiovascular structures during development.

Animals↗

Impaired angiogenesis, early callus formation, and late stage remodeling in fracture healing of osteopontin-deficient mice.

UNLABELLED: OPN is an ECM protein with diverse localization and functionality. The role of OPN during fracture healing was examined using wildtype and OPN(-/-) mice. Results showed that OPN plays an important role in regulation of angiogenesis, callus formation, and mechanical strength in early stages of healing and facilitates late stage bone remodeling and ECM organization. INTRODUCTION: Osteopontin (OPN) is an extracellular matrix (ECM) protein with diverse localization and functionality that has been reported to play a regulatory role in both angiogenesis and osteoclastic bone remodeling, two vital processes for normal bone healing. MATERIALS AND METHODS: Bone repair in wildtype and OPN(-/-) mice was studied using a femoral fracture model. microCT was used for quantitative angiographic measurements at 7 and 14 days and to assess callus size and mineralization at 7, 14, 28, and 56 days. Biomechanical testing was performed on intact bones and on fracture specimens at 14, 28, and 56 days. Histology and quantitative RT-PCR were used to evaluate cellular functions related to ECM formation and bone remodeling. RESULTS: OPN deficiency was validated in the OPN(-/-) mice, which generally displayed normal levels of related ECM proteins. Intact OPN(-/-) bones displayed increased elastic modulus but decreased strength and ductility. Fracture neovascularization was reduced at 7 but not 14 days in OPN(-/-) mice. OPN(-/-) mice exhibited smaller fracture calluses at 7 and 14 days, as well as lower maximum torque and work to failure. At 28 days, OPN(-/-) mice had normal callus size but a persistent reduction in maximum torque and work to failure. Osteoclast differentiation occurred normally, but mature osteoclasts displayed reduced functionality, decreasing late stage remodeling in OPN(-/-) mice. Thus, at 56 days, OPN(-/-) fractures possessed increased callus volume, increased mechanical stiffness, and altered collagen fiber organization. CONCLUSIONS: This study showed multiple, stage-dependent roles of OPN during fracture healing. We conclude that OPN deficiency alters the functionality of multiple cell types, resulting in delayed early vascularization, altered matrix organization and late remodeling, and reduced biomechanical properties. These findings contribute to an improved understanding of the role of OPN in vivo and provide new insight into mechanistic control of vascularization and bone regeneration during fracture repair.

Animals↗

Age-related changes in trabecular bone microdamage initiation.

With age, alterations occurring in bone quality, quantity, and microarchitecture affect the resistance of trabecular bone to local failure. The clinical implications of these changes are evident by the observed exponential increase in fracture incidence with age. Although age-related development of skeletal fragility is well established, it is unclear how the local failure properties of bone change with age. We previously reported a specimen-specific technique to assess microstructural stresses and strains associated with microdamage initiation but did not assess age-related changes. In this study, we compared younger (average age 2 years) and older (average age 10 years) bovine trabecular bone to evaluate how alterations in bovine bone quantity and quality with age affect the local mechanical environment associated with microdamage formation. The results show strong positive correlations between microdamage and local stresses and strains for both younger and older bovine trabecular bone. Correlation strength was slightly improved (<8%) for some parameters by incorporating heterogeneous local material properties based on mineral density into the finite element models. Within individual trabeculae, average stresses and strains were significantly higher in microdamaged trabeculae compared to randomly selected undamaged trabeculae, regardless of age. However, damaged trabeculae in older bone were found to have higher stresses and lower strains than those from younger bone. Corresponding differences in mineral density, microarchitecture, and FEM-determined local material properties were also observed between the two groups. Taken together, these data suggest marked age-related changes in the mechanics of microdamage initiation at the trabecular level. The combined experimental, computational, and histochemical approaches used in this study provide an improved understanding of microdamage initiation and bone quality.

Aging↗

Analysis of cartilage matrix fixed charge density and three-dimensional morphology via contrast-enhanced microcomputed tomography.

Small animal models of osteoarthritis are often used for evaluating the efficacy of pharmacologic treatments and cartilage repair strategies, but noninvasive techniques capable of monitoring matrix-level changes are limited by the joint size and the low radiopacity of soft tissues. Here we present a technique for the noninvasive imaging of cartilage at micrometer-level resolution based on detecting the equilibrium partitioning of an ionic contrast agent via microcomputed tomography. The approach exploits electrochemical interactions between the molecular charges present in the cartilage matrix and an ionic contrast agent, resulting in a nonuniform equilibrium partitioning of the ionic contrast agent reflecting the proteoglycan distribution. In an in vitro model of cartilage degeneration we observed changes in x-ray attenuation magnitude and distribution consistent with biochemical and histological analyses of sulfated glycosaminoglycans, and x-ray attenuation was found to be a strong predictor of sulfated glycosaminoglycan density. Equilibration with the contrast agent also permits direct in situ visualization and quantification of cartilage surface morphology. Equilibrium partitioning of an ionic contrast agent via microcomputed tomography thus provides a powerful approach to quantitatively assess 3D cartilage composition and morphology for studies of cartilage degradation and repair.

Animals↗

Hemodynamic shear stresses in mouse aortas: implications for atherogenesis.

OBJECTIVE: The hemodynamic environment is a determinant of susceptibility to atherosclerosis in the vasculature. Although mouse models are commonly used in atherosclerosis studies, little is known about local variations in wall shear stress (WSS) in the mouse and whether the levels of WSS are comparable to those in humans. The objective of this study was to determine WSS values in the mouse aorta and to relate these to expression of gene products associated with atherosclerosis. METHODS AND RESULTS: Using micro-CT and ultrasound methodologies we developed a computational fluid dynamics model of the mouse aorta and found values of WSS to be much larger than those for humans. We also used a quantum dot-based approach to study vascular cell adhesion molecule-1 and intercellular adhesion molecule-1 expression on the aortic intima and demonstrated that increased expression for these molecules occurs where WSS was relatively low for the mouse. CONCLUSIONS: Despite large differences in WSS in the two species, the spatial distributions of atherogenic molecules in the mouse aorta are similar to atherosclerotic plaque localization found in human aortas. These results suggest that relative differences in WSS or in the direction of WSS, as opposed to the absolute magnitude, may be relevant determinants of flow-mediated inflammatory responses.

Animals↗

Mineralization capacity of Runx2/Cbfa1-genetically engineered fibroblasts is scaffold dependent.

Development of tissue-engineered constructs for skeletal regeneration of large critical-sized defects requires the identification of a sustained mineralizing cell source and careful optimization of scaffold architecture and surface properties. We have recently reported that Runx2-genetically engineered primary dermal fibroblasts express a mineralizing phenotype in monolayer culture, highlighting their potential as an autologous osteoblastic cell source which can be easily obtained in large quantities. The objective of the present study was to evaluate the osteogenic potential of Runx2-expressing fibroblasts when cultured in vitro on three commercially available scaffolds with divergent properties: fused deposition-modeled polycaprolactone (PCL), gas-foamed polylactide-co-glycolide (PLGA), and fibrous collagen disks. We demonstrate that the mineralization capacity of Runx2-engineered fibroblasts is scaffold dependent, with collagen foams exhibiting ten-fold higher mineral volume compared to PCL and PLGA matrices. Constructs were differentially colonized by genetically modified fibroblasts, but scaffold-directed changes in DNA content did not correlate with trends in mineral deposition. Sustained expression of Runx2 upregulated osteoblastic gene expression relative to unmodified control cells, and the magnitude of this expression was modulated by scaffold properties. Histological analyses revealed that matrix mineralization co-localized with cellular distribution, which was confined to the periphery of fibrous collagen and PLGA sponges and around the circumference of PCL microfilaments. Finally, FTIR spectroscopy verified that mineral deposits within all Runx2-engineered scaffolds displayed the chemical signature characteristic of carbonate-containing, poorly crystalline hydroxyapatite. These results highlight the important effect of scaffold properties on the capacity of Runx2-expressing primary dermal fibroblasts to differentiate into a mineralizing osteoblastic phenotype for bone tissue engineering applications.

Animals↗

Alteration of femoral bone morphology and density in COX-2-/- mice.

A role of COX-2 in pathological bone destruction and fracture repair has been established; however, few studies have been conducted to examine the involvement of COX-2 in maintaining bone mineral density and bone micro-architecture. In this study, we examined bone morphology in multiple trabecular and cortical regions within the distal and diaphyseal femur of 4-month-old wild-type and COX-2-/- mice using micro-computed tomography. Our results demonstrated that while COX-2-/- female mice had normal bone geometry and trabecular microarchitecture at 4 months of age, the male knockout mice displayed reduced bone volume fraction within the distal femoral metaphysis. Furthermore, male COX-2-/- mice had a significant reduction in cortical bone mineral density within the central cortical diaphysis and distal epiphysis and metaphysis. Consistent with the observed reduction in cortical mineral density, biomechanical testing via 4-point-bending showed that male COX-2-/- mice had a significant increase in postyield deformation, indicating a ductile bone phenotype in male COX-2-/- mice. In conclusion, our study suggests that genetic ablation of COX-2 may have a sex-related effect on cortical bone homeostasis and COX-2 plays a role in maintaining normal bone micro-architecture and density in mice.

Animals↗

Effects of Runx2 genetic engineering and in vitro maturation of tissue-engineered constructs on the repair of critical size bone defects.

Genetic and tissue engineering strategies are being pursued to address the clinical limitations of current bone grafting materials. Based on our previous work demonstrating that overexpression of the Runx2 osteoblastic transcription factor and in vitro construct maturation synergistically enhanced in vivo mineralization in an ectopic site (Byers et al., Tissue Eng 2004;10:1757-1766), we examined the effects of these two parameters on the repair of critical size bone defects. Primary rat bone marrow stromal cells transduced with Runx2 or control (no Runx2 insert) retroviral vector were seeded onto 3D fused deposition-modeled polycaprolactone scaffolds. Runx2-modified cells produced biologically-equivalent mineralized matrices at nearly 2-fold higher rates than control cells. Constructs cultured in vitro for 1 day (immature) or 21 days (mineralized) were subsequently implanted into critical size calvaria defects in syngeneic rats, and bone healing was analyzed by micro-CT and histomorphometry at 28 days. Runx2-modified and control constructs precultured for 1 day healed to a greater extent than defects receiving no implant. Cell-free scaffolds yielded equivalent levels of bone formation as constructs precultured for 1 day. Interestingly, defects treated with control cell-seeded constructs precultured for 21 days exhibited low bone formation compared to other construct treatments, and repair was comparable to empty defects. In contrast, Runx2-modified constructs precultured for 21 days contained twice as much bone as control constructs precultured for 21 days and equivalent levels of new bone as cell-free and 1 day precultured constructs. These results demonstrate interplay between Runx2 genetically-modified cells and in vitro construct maturation in bone healing responses.

Absorbable Implants↗

Fluid flow increases type II collagen deposition and tensile mechanical properties in bioreactor-grown tissue-engineered cartilage.

A novel parallel-plate bioreactor has been designed to apply a consistent level of fluid flow-induced shear stress to tissue-engineered articular cartilage in order to improve the matrix composition and mechanical properties and more nearly approximate to that of native tissue. Primary bovine articular chondrocytes were seeded into the bioreactor at high densities (1.7 x 10(6) cell/cm2) without a scaffold and cultured for two weeks under static, no-flow conditions. A mean fluid flow-induced shear stress of 1 dyne/cm2 was then applied continuously for 3 days. The application of flow produced constructs with significantly (p < 0.05) higher amounts of total collagen (via hydroxyproline) and specifically type II collagen (via ELISA) (25.3 +/- 2.5% and 22.1 +/- 4.7% of native tissue, respectively) compared to static controls (22.4 +/- 1.7% and 9.5 +/- 2.3%, respectively). Concurrently, the tensile Young's modulus and ultimate strength were significantly increased in flow samples (2.28 +/- 0.19 MPa and 0.81 +/- 0.07 MPa, respectively) compared to static controls (1.55 +/- 0.10 MPa and 0.62 +/- 0.05 MPa, respectively). This study suggests that flow-induced shear stresses and/or enhanced mass transport associated with the hydrodynamic environment of our novel bioreactor may be an effective functional tissue-engineering strategy for improving matrix composition and mechanical properties in vitro.

Animals↗

Regulation of growth plate chondrocytes by 1,25-dihydroxyvitamin D3 requires caveolae and caveolin-1.

UNLABELLED: We examined the role of caveolae and caveolin-1 in the mechanism of 1alpha,25(OH)(2)D(3) action in growth plate chondrocytes. We found that caveolae are required for rapid 1alpha,25(OH)(2)D(3)-dependent PKC signaling, and caveolin-1 must be present based on studies using chondrocytes from Cav-1(-/-) mice. INTRODUCTION: 1,25-dihydroxyvitamin D(3) [1alpha,25(OH)(2)D(3)] regulates endochondral ossification in part through membrane-associated mechanisms, including protein kinase C (PKC) signaling activated by a membrane-associated 1alpha,25(OH)(2)D(3)-binding protein, ERp60. We tested the hypothesis that caveolae are required for 1alpha,25(OH)(2)D(3) action and play an important role in regulating chondrocyte biology and growth plate physiology. MATERIALS AND METHODS: Rat costochondral chondrocytes were examined for caveolae by transmission electron microscopy of cultured cells and of cells in situ. Western blots and confocal microscopy were used to detect caveolae proteins including caveolin-1 (Cav-1) and 1alpha,25(OH)(2)D(3) receptors. Caveolae cholesterol was depleted with beta-cyclodextrin (CD) and effects of 1alpha,25(OH)(2)D(3) on PKC, DNA synthesis, alkaline phosphatase, and proteoglycan production determined. Chondrocytes from Cav-1(-/-) and C57BL/6 wildtype mice were also treated with 1alpha,25(OH)(2)D(3). Epiphyses and costochondral junctions of 8-week-old male Cav-1(-/-) and wildtype mice (N = 8) were compared by histomorphometry and microCT. Data were analyzed by ANOVA and Bonferroni for posthoc comparisons. RESULTS: Growth zone chondrocytes had caveolae and Cav-1, -2, and -3. Resting zone chondrocytes, which do not exhibit a rapid 1alpha,25(OH)(2)D(3)-dependent increase in PKC activity, also had these caveolins, but caveolae were larger and fewer in number. ERp60 but not VDR co-localized with Cav-1 in plasma membranes and in lipid rafts. CD-treatment blocked 1alpha,25(OH)(2)D(3) effects on all parameters tested. The Cav-1(-/-) cells did not respond to 1alpha,25(OH)(2)D(3), although 1alpha,25(OH)(2)D(3) increased PKC, alkaline phosphatase, and [(35)S]-sulfate incorporation in wildtype C57BL/6 cells. Histology and microCT showed that Cav-1(-/-) growth plates were longer and had more hypertrophic cells in each column. Growth plate changes were reflected in the metaphysis. CONCLUSIONS: The membrane-mediated effects of 1alpha,25(OH)(2)D(3) require caveolae and Cav-1, and Cav-1 deficiency results in altered growth plate physiology.

Animals↗

Periosteal progenitor cell fate in segmental cortical bone graft transplantations: implications for functional tissue engineering.

UNLABELLED: A murine segmental femoral bone graft model was used to show the essential role of donor periosteal progenitor cells in bone graft healing. Transplantation of live bone graft harvested from Rosa 26A mice showed that approximately 70% of osteogenesis on the graft was attributed to the expansion and differentiation of donor periosteal progenitor cells. Furthermore, engraftment of BMP-2-producing bone marrow stromal cells on nonvital allografts showed marked increases in cortical graft incorporation and neovascularization, suggesting that gene-enhanced, tissue engineered functional periosteum may improve allograft incorporation and repair. INTRODUCTION: The loss of cellular activity in a structural bone allograft markedly reduces its healing potential compared with a live autograft. To further understand the cellular mechanisms for structural bone graft healing and repair and to devise a therapeutic strategy aimed at enhancing the performance of allograft, we established a segmental femoral structural bone graft model in mice that permits qualitative and quantitative analyses of graft healing and neovascularization. MATERIALS AND METHODS: Using this segmental femoral bone graft model, we transplanted live isografts harvested from Rosa 26A mice that constitutively express beta-galactosidase into their wildtype control mice. In an attempt to emulate the osteogenic and angiogenic properties of periosteum, we applied a cell-based, adenovirus-mediated gene therapy approach to engraft BMP-2-producing bone marrow stromal cells onto devitalized allografts. RESULTS: X-gal staining for donor cells allowed monitoring the progression of periosteal progenitor cell fate and showed that 70% of osteogenesis was attributed to cellular proliferation and differentiation of donor progenitor cells on the surface of the live bone graft. Quantitative muCT analyses showed a 3-fold increase in new bone callus formation and a 6.8-fold increase in neovascularization for BMP-2/stromal cell-treated allograft compared with control acellular allografts. Histologic analyses showed the key features of autograft healing in the BMP-2/stromal cell-treated allografts, including the formation of a mineralized bone callus completely bridging the segmental defects, abundant neovascularization, and extensive resorption of bone graft. CONCLUSIONS: The marked improvement of healing in these cellularized allografts suggests a clinical strategy for engineering a functional periosteum to improve the osteogenic and angiogenic properties of processed allografts.

Acid Phosphatase↗

Trabecular bone microdamage and microstructural stresses under uniaxial compression.

The balance between local remodeling and accumulation of trabecular bone microdamage is believed to play an important role in the maintenance of skeletal integrity. However, the local mechanical parameters associated with microdamage initiation are not well understood. Using histological damage labeling, micro-CT imaging, and image-based finite element analysis, regions of trabecular bone microdamage were detected and registered to estimated microstructural von Mises effective stresses and strains, maximum principal stresses and strains, and strain energy density (SED). Bovine tibial trabecular bone cores underwent a stepwise uniaxial compression routine in which specimens were micro-CT imaged following each compression step. The results indicate that the mode of trabecular failure observed by micro-CT imaging agreed well with the polarity and distribution of stresses within an individual trabecula. Analysis of on-axis subsections within specimens provided significant positive relationships between microdamage and each estimated tissue stress, strain and SED parameter. In a more localized analysis, individual microdamaged and undamaged trabeculae were extracted from specimens loaded within the elastic region and to the apparent yield point. As expected, damaged trabeculae in both groups possessed significantly higher local stresses and strains than undamaged trabeculae. The results also indicated that microdamage initiation occurred prior to apparent yield at local principal stresses in the range of 88-121 MPa for compression and 35-43 MPa for tension and local principal strains of 0.46-0.63% in compression and 0.18-0.24% in tension. These data provide an important step towards understanding factors contributing to microdamage initiation and establishing local failure criteria for normal and diseased trabecular bone.

Animals↗

Biological effects of rAAV-caAlk2 coating on structural allograft healing.

Structural bone allografts often fracture due to their lack of osteogenic and remodeling potential. To overcome these limitations, we utilized allografts coated with recombinant adeno-associated virus (rAAV) that mediate in vivo gene transfer. Using beta-galactosidase as a reporter gene, we show that 4-mm murine femoral allografts coated with rAAV-LacZ are capable of transducing adjacent inflammatory cells and osteoblasts in the fracture callus following transplantation. While this LacZ vector had no effect on allograft healing, bone morphogenetic protein signals delivered via rAAV-caAlk2 coating induced endochondral bone formation directly on the cortical surface of the allograft by day 14. By day 28 there was evidence of remodeling of the new woven bone and massive osteoclastic resorption of the cortical surface of the rAAV-caAlk2-coated allografts only. Micro-CT analysis of rAAV-LacZ- vs rAAV-caAlk2-coated allografts after 42 days of healing demonstrated a significant increase in new bone formation (0.67 +/- 0.21 vs 2.49 +/- 0.40 mm(3); P < 0.005). Furthermore, the 3D micro-CT images of femurs grafted with rAAV-Alk2-coated allografts provided the first evidence that complete bridging of bone around a cortical allograft is possible. These results indicate that cell-free, rAAV-coated allografts have the potential to revitalize in vivo following transplantation.

Activin Receptors, Type II↗

Runx2/Cbfa1-genetically engineered skeletal myoblasts mineralize collagen scaffolds in vitro.

Genetic engineering of progenitor and stem cells is an attractive approach to address cell sourcing limitations associated with tissue engineering applications. Bone tissue engineering represents a promising strategy to repair large bone defects, but has been limited in part by the availability of a sustained, mineralizing cell source. This study examined the in vitro mineralization potential of primary skeletal myoblasts genetically engineered to overexpress Runx2/Cbfa1, an osteoblastic transcriptional regulator essential to bone formation. These cells were viable at the periphery of 3D fibrous collagen scaffolds for 6 weeks of static culture. Exogenous Runx2 expression induced osteogenic differentiation and repressed myogenesis in these constructs relative to controls. Runx2-modified cells deposited significant amounts of mineralized matrix and hydroxyapatite, as determined by microcomputed tomography, histological analysis, and Fourier transform infrared spectroscopy, whereas scaffolds seeded with control cells exhibited no mineralized regions. Although mineralization by Runx2-engineered cells was confined to the periphery of the construct, colocalizing with cell viability, it was sufficient to increase the compressive modulus of constructs 30-fold relative to controls. This work demonstrates that Runx2 overexpression in skeletal myoblasts may address current obstacles of bone tissue engineering by providing a potent cell source for in vitro mineralization and construct maturation. Additionally, the use of genetic engineering methods to express downstream control factors and transcriptional regulators, in contrast to soluble signaling molecules, represents a robust strategy to enhance cellular activities for tissue engineering applications.

Animals↗

Estrogen prevents bone loss through transforming growth factor beta signaling in T cells.

Estrogen (E) deficiency leads to an expansion of the pool of tumor necrosis factor (TNF)-producing T cells through an IFN-gamma-dependent pathway that results in increased levels of the osteoclastogenic cytokine TNF in the bone marrow. Disregulated IFN-gamma production is instrumental for the bone loss induced by ovariectomy (ovx), but the responsible mechanism is unknown. We now show that mice with T cell-specific blockade of type beta transforming growth factor (TGFbeta) signaling are completely insensitive to the bone-sparing effect of E. This phenotype results from a failure of E to repress IFN-gamma production, which, in turn, leads to increased T cell activation and T cell TNF production. Furthermore, ovx blunts TGFbeta levels in the bone marrow, and overexpression of TGFbeta in vivo prevents ovx-induced bone loss. These findings demonstrate that E prevents bone loss through a TGFbeta-dependent mechanism, and that TGFbeta signaling in T cells preserves bone homeostasis by blunting T cell activation. Thus, stimulation of TGFbeta production in the bone marrow is a critical "upstream" mechanism by which E prevents bone loss, and enhancement of TGFbeta levels in vivo may constitute a previously undescribed therapeutic approach for preventing bone loss.

Animals↗

Quantitative microcomputed tomography analysis of collateral vessel development after ischemic injury.

Transgenic mouse models are increasingly being used to investigate the functions of specific growth factors or matrix proteins to design therapeutic strategies for controlling blood vessel growth. However, the available methodologies for evaluating angiogenesis and arteriogenesis in these models are limited by animal size, user subjectivity, the power to visualize the three-dimensional vessel networks, or the capability to employ a vigorous quantitative analysis. In this study, we employed contrast-enhanced microcomputed tomography imaging to assess collateral development after induction of hindlimb ischemia in the mouse. The morphological parameters vessel volume, connectivity, number, thickness, thickness distribution, separation, and degree of anisotropy were evaluated in control and surgery limbs 0, 3, and 14 days postsurgery. Results indicate that the vascular volume of the surgically manipulated limb was reconstituted as early as 3 days after femoral artery excision through development of a series of highly connected, small caliber, closely spaced, and isotropically oriented collateral vessels. Parametric analyses were completed to assess the sensitivity of the calculated morphological parameters to variations in image binarization threshold and voxel size. Images taken at the 36-microm voxel size were found to be optimal for evaluating collateral vessel formation, whereas 8- to 16-microm voxel sizes were needed to resolve smaller vascular structures. This study demonstrates the utility of microcomputed tomography as a robust method for quantitative, three-dimensional analysis of blood vessel networks. Whereas these initial efforts focused on the mouse hindlimb ischemia model, the developed techniques may be applied to a variety of model systems to investigate mechanisms of angiogenesis and arteriogenesis.

Animals↗

Microcomputed tomography imaging of skeletal development and growth.

Skeletogenesis is an exquisitely orchestrated and dynamic process, culminating in the formation of highly variable and complex mineralized structures that are optimized for their function. While cellular and molecular biology studies have provided tremendous recent progress toward understanding how patterns of bone formation are regulated, high resolution imaging techniques such as microcomputed tomography (micro-CT) can provide complementary quantitative information about the progressive changes in three-dimensional (3-D) skeletal morphology and density that occur during early skeletal development and postnatal growth. Furthermore, recently developed in vivo micro-CT systems promise to be a powerful and efficient tool for noninvasively monitoring normal skeletogenesis, as well as for evaluating the effects of genetic or environmental manipulation. This review focuses on the use of micro-CT imaging and analysis to better understand normal and abnormal skeletal development and growth.

Animals↗