PubMed Health⌕ Search

Biomedical subjects

Robert H Marchessault

Publications and source records attributed to Robert H Marchessault.

15 recordsLinked to original sources
PubMed2006

Graft copolymers of methyl methacrylate and poly([R]-3-hydroxybutyrate) macromonomers as candidates for inclusion in acrylic bone cement formulations: Compression testing.

Graft copolymers of methyl methacrylate and biodegradable, biocompatible bacterial poly([R]-3-hydroxybutyrate) (PHB) blocks were synthesized and evaluated as possible constituents in acrylic bone cements for use in orthopaedic applications. The copolymers were produced by conventional free radical copolymerization and incorporated in one commercially available acrylic bone cement brand, Antibiotic Simplex (AKZ). Cements with formulations containing 6.7 and 13.5 wt % of PMMA-graft-PHB were prepared. The morphology of the graft copolymer particles was suggested to influence the ability of the modified cement to be processed. Formulations containing more than about 20 wt % of the graft copolymer resulted in cement doughs that, both after first preparation and several hours later, were either sandy or soft spongy in texture and, thus, would be unacceptable for use in orthopaedic applications. The morphologies of the powders and the volumetric porosity (p) and ultimate compressive strength (UCS) of the cured cements were determined. Micro computed tomography showed that the cements presented average porosities of 13.5-16.9%. It was found that, while the powder particle shape and size for the experimental cements were markedly different from those of AKZ, there was no significant difference in either p or UCS for these cements. The latter was determined to be about 85 MPa for the modified cements and 84 MPa for Antibiotic Simplex. Furthermore, the UCS of all the cements exceeded the minimum level for acrylic bone cements, as stipulated by ASTM F-451.

Biocompatible Materials↗
PubMed2004

Synthesis and properties of graft copolymers based on poly(3-hydroxybutyrate) macromonomers.

Graft copolymers of poly(methyl methacrylate) with poly(3-hydroxybutyrate), PHB, segments as long side chains were prepared by the macromonomer method. PHB macromonomers were prepared from the esterification of oligomers with 2-hydroxyethyl methacrylate at their carboxylic acid end. Esterification products displayed low polydispersity indices (ca. 1.2) and a functionality of over 83%, with a Mn of 2,020. Using free radical polymerization methods, the macromonomers were copolymerized with methyl methacrylate to yield graft (comb type) copolymers at different comonomer feed ratios. The graft copolymers contained from 0.5 to 14 mol-% of PHB blocks, with a glass transition temperature decreasing from 100 to 3 degrees C.

Free Radicals↗
PubMed2002

Characterization of polyacrylamide-stabilized Pfl phage liquid crystals for protein NMR spectroscopy.

A new polymer-stabilized nematic liquid crystal has been characterized for the measurement of biomolecular residual dipolar couplings. Filamentous Pf1 phage were embedded in a polyacrylamide matrix that fixes the orientation of the particles. The alignment was characterized by the quadrupolar splitting of the 2H NMR water signal and by the measurement of 1H-15N residual dipolar couplings (RDC) in the archeal translation elongation factor 1beta. Protein dissolved in the polymer-stabilized medium orients quantitatively as in media without polyacrylamide. We show that the quadrupolar splitting and RDCs are zero in media in which the Pf1 phage particles are aligned at the magic angle. This allows measurement of J and dipolar couplings in a single sample.

Acrylic Resins↗
PubMed2002

Biosynthesis of novel thermoplastic polythioesters by engineered Escherichia coli.

The development of non-petrochemical sources for the plastics industry continues to progress as large multinationals focus on renewable resources to replace fossil carbon. Many bacteria are known to accumulate polyoxoesters as water-insoluble granules in the cytoplasm. The thermoplastic and/or elastomeric behaviour of these biodegradable polymers holds promise for the development of various technological applications. Here, we report the synthesis and characterization of microbial polythioesters (PTEs), a novel class of biopolymers of general technological relevance. Biosynthesis of PTE homopolymers was achieved using a recombinant strain of Escherichia coli that expressed a non-natural pathway consisting of a butyrate kinase, a phosphotransbutyrylase, and a PHA synthase. Different homopolymers were produced, consisting of either 3-mercaptopropionate, 3-mercaptobutyrate, or 3-mercaptovalerate repeating units, if the respective mercaptoalkanoic acids were provided as precursor substrates to the fermentative process. The PTEs contributed up to 30% (w/w) of the cellular dry weight and were identified as hydrophobic inclusions in the cytoplasm. The chemical and stereochemical homogeneity of the purified PTEs were identified by different methods, and the estimated physical properties were compared to the oxypolyester equivalents, revealing low crystalline order and, for the poly(3-mercaptopropionate) improved thermal stability. The ability to produce PTEs through a biosynthetic route opens up new avenues in the field of biomaterials.

Biopolymers↗
PubMedDate not supplied

Characterization of microbial polythioesters: physical properties of novel copolymers synthesized by Ralstonia eutropha.

Various samples of polythioesters with different contents of 3-mercaptopropionic acid (3MP) or 3-mercaptobutyric acid (3MB) as one comonomer and with 3-hydroxybutyric acid (3HB) as the second constituent were produced by cultivating cells of Ralstonia eutropha strain H16 in mineral salts medium containing 3MP or 3MB plus gluconate as carbon sources. Fermentations were done also at the 30-L scale. The various samples were cast as films from chloroform and the following were recorded: melting point, solid-state NMR, X-ray diffraction. The copolyester poly(3HB-co-3MP) displayed mutiple melting peaks corresponding to separate phases rich in 3MP and 3HB. The copolyester poly(3HB-co-3MB) displayed very low crystallinity and melting points higher than that of poly(3HB) when the 3HB content was 40% or less.

3-Hydroxybutyric Acid↗
PubMedDate not supplied

NMR imaging of high-amylose starch tablets. 1. Swelling and water uptake.

Pharmaceutical tablets made of modified high-amylose starch have a hydrophilic polymer matrix into which water can penetrate with time to form a hydrogel. Nuclear magnetic resonance imaging was used to study the water penetration and the swelling of the matrix of these tablets. The tablets immersed in water were imaged at different time intervals on a 300 MHz NMR spectrometer. Radial images show clearly the swelling of the tablets and the water concentration profile. The rate constants for water diffusion and the tablet swelling were extracted from the experimental data. The water diffusion process was found to follow case II kinetics at 25 degrees C. NMR imaging also provided spin density profiles of the water penetrating inside the tablets.

Amylose↗
PubMedDate not supplied

Thermal degradation of poly(3-hydroxyalkanoates): preparation of well-defined oligomers.

The thermal degradation of the biodegradable bacterial polyesters poly(3-hydroxybutyrate), PHB, poly(3-hydroxyvalerate), PHV, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate), 0-21 mol % of hydroxyvalerate, was studied. At moderately low temperatures (170-200 degrees C), the main product is a well-defined oligomer, especially a 500-10,000 g/mol macromolecule, which contains one unsaturated end group, predominantly a trans-alkenyl end group, as well as a carboxylic end group. The process was studied regarding the effect of the copolymer composition and reaction time at 190 degrees C. During the first few hours of reaction, the thermal degradation of PHB and PHV followed a kinetic model of random scission, but eventually auto-acceleration of the pyrolysis was detected, probably due to the influence of the crotonate end groups of the oligomers formed. Ten-time scale-up experiments on a Brabender instrument were successfully undertaken.

Chromatography, Gel↗
PubMedDate not supplied

One-step synthesis of amphiphilic diblock copolymers from bacterial poly([R]-3-hydroxybutyric acid).

Catalyzed transesterification in the melt is used to produce diblock copolymers of poly([R]-3-hydroxybutyric acid), PHB, and monomethoxy poly(ethylene glycol), mPEG, in a one-step process. Bacterial PHB of high molecular weight is depolymerized by consecutive and partly simultaneous reactions: pyrolysis and transesterification. The formation of diblocks is accomplished by the nucleophilic attack from the hydroxyl end-group of the mPEG catalyzed by bis(2-ethylhexanoate) tin. The resulting diblock copolymers are amphiphilic and self-assemble into sterically stabilized colloidal suspensions of PHB crystalline lamellae.

Bacteria↗
PubMedDate not supplied

NMR imaging of high-amylose starch tablets. 2. Effect of tablet size.

Carbohydrate polymers are widely used for pharmaceutical applications such as the controlled release of drugs. The swelling and water mobility in high-amylose starch tablets are important parameters to be determined for these applications. They have been studied at different time intervals by nuclear magnetic resonance imaging (NMRI) after the immersion of the samples in water. These tablets have a hydrophilic matrix, which swells anisotropically and forms a hydrogel in water. NMRI shows clearly the anisotropy of the water penetration and the swelling along the radial and axial dimensions of the tablets. Empirical relationships are established to describe the kinetics of water penetration and swelling of the tablets. Results show that water uptake and tablet swelling strongly depend on the size of the tablets. Gravimetric measurements of water uptake were also performed in comparison with the NMRI results.

Absorption↗
PubMedDate not supplied

Cocrystallization model for synthetic biodegradable poly(butylene adipate-co-butylene terephthalate).

Synthetic biodegradable poly(butylene adipate-co-butylene terephthalate), P(BA-co-BT), with 56 mol % butylene adipate, BA, was characterized by solid-state NMR spectroscopy, thermal analysis, X-ray diffraction, computer modeling, and polarization microscopy. The NMR study showed the presence of BA and butylene terephthalate, BT. T(1C) NMR measurements proved that some BA and BT units were in crystalline regions. Thermal analysis showed one glass-transition temperature and a single diffuse melting endotherm corresponding to a large melting-point depression of about 100 degrees C compared with poly(butylene terephthalate), PBT. These results suggest that there is only one crystalline phase. An X-ray fiber diagram of a stretched film could be indexed with the same unit cell as that for PBT. Computer modeling showed that the adipate unit fits into the crystal structure of PBT by adopting a TTGTG dihedral angle sequence in the crystalline conformation proposed for the cocrystallization model. The predicted fiber diagram from the proposed model qualitatively agrees with the experimental one. Polarization microscopy revealed that the spherulite growth rate of P(BA-co-BT) was similar to that for poly(butylene adipate), PBA.

Absorbable Implants↗
PubMedDate not supplied

Physical properties of microbial polythioesters: characterization of poly(3-mercaptoalkanoates) synthesized by engineered Escherichia coli.

Physical properties of chiral poly(thioesters), PTEs, prepared by engineered Escherichia coli, were examined by GPC, 13C CP/MAS solid-state NMR, X-ray diffraction, and thermal analysis. Microbial homopolymers of PTEs, poly(3-mercaptopropionate), PMP, and poly(3-mercaptovalerate), PMV, showed different solubility characteristics compared to poly(hydroxyalkanoates), PHAs. Generally, PTEs required higher temperatures for dissolution. Poly(3-mercaptobutyrate), PMB, and PMV dissolve in chloroform, and the molecular weight values were revealed by GPC as 176,000 and 165,000, respectively. The density values for PMP and PMB were 1.42 and 1.27 g/cm3, respectively. These values are similar to those for oxygen analogues. The NMR spectra for PTEs showed that carbonyl carbons are greatly shifted downfield by the sulfur atoms in the chain backbone compared to the PHA family. X-ray powder diffraction data indicated that PTEs are crystalline materials, but they do not crystallize as well as in the PHA family. The melting point, Tm, for PMP was 170 degrees C, which is about 100 degrees C higher than the equivalent oxygen analogue, poly(3-hydroxypropionate), PHP, and almost the same as that of bacterial poly(3-hydroxybutyrate), PHB. According to thermal analysis, only the PMP sample had enhanced heat stability, e.g., the decomposition temperature for PMP was 277 degrees C at 5% weight loss, whereas the values for PHP and PHB were 233 and 260 degrees C at the same weight loss, respectively.

Escherichia coli↗
PubMedDate not supplied

Bacterial polyesters: biosynthesis, biodegradable plastics and biotechnology.

The discovery and chemical identification, in the 1920s, of the aliphatic polyester: poly(3-hydroxybutyrate), PHB, as a granular component in bacterial cells proceeded without any of the controversies which marked the recognition of macromolecules by Staudinger. Some thirty years after its discovery, PHB was recognized as the prototypical biodegradable thermoplastic to solve the waste disposal challenge. The development effort led by Imperial Chemical Industries Ltd., encouraged interdisciplinary research from genetic engineering and biotechnology to the study of enzymes involved in biosynthesis and biodegradation. From the simple PHB homopolyester discovered by Maurice Lemoigne in the mid-twenties, a family of over 100 different aliphatic polyesters of the same general structure has been discovered. Depending on bacterial species and substrates, these high molecular weight stereoregular polyesters have emerged as a new family of natural polymers ranking with nucleic acids, polyamides, polyisoprenoids, polyphenols, polyphosphates, and polysaccharides. In this historical review, the chemical, biochemical and microbial highlights are linked to personalities and locations involved with the events covering a discovery timespan of 75 years.

3-Hydroxybutyric Acid↗
PubMedDate not supplied

Self-assembly of precursors in single-crystal growth of biopolymers.

Self-assembly of precursors in dilute solution single-crystal growth of poly[(R)-3-hydroxyvalerate] (PHV) and the fungal polysaccharide mycodextran were studied by transmission electron microscopy, especially at the early stages of crystallization. Precursors for PHV, such as small primary nuclei and tiny square tiles, consolidate to a large square crystal composed of orthogonally arranged tiles. By contrast, the precursors of mycodextran were lath-shaped, which suggests that the crystal growth is mainly in the longitudinal direction. Needlelike precursors were observed either free or as protrusions at the lath ends. In general, single-crystal shape and morphology are dependent on the type of precursor and on the manner of crystallization.

Biopolymers↗
PubMedDate not supplied

Imaging of high-amylose starch tablets. 3. Initial diffusion and temperature effects.

The penetration of water into cross-linked high amylose starch tablets was studied at different temperatures by nuclear magnetic resonance (NMR) imaging, which follows the changes occurring at the surface and inside the starch tablets during swelling. It was found that the swelling was anisotropic, whereas water diffusion was almost isotropic. The water proton image profiles at the initial stage of water penetration were used to calculate the initial diffusion coefficient. The swelling and water concentration gradients in this controlled release system show significant temperature dependence. Diffusion behavior changed from Fickian to Case II diffusion with increasing temperature. The observed phenomena are attributed to the gelatinization of starch and the pseudo-cross-linking effect of double helix formation.

Amylose↗