PubMed Health⌕ Search

Biomedical subjects

Robert J Forster

Publications and source records attributed to Robert J Forster.

28 records · Page 2Linked to original sources

Relative stability of transgene DNA fragments from GM rapeseed in mixed ruminal cultures.

The use of transgenic crops as feeds for ruminant animals has prompted study of the possible uptake of transgene fragments by ruminal micro-organisms and/or intestinal absorption of fragments surviving passage through the rumen. The persistence in buffered ruminal contents of seven different recombinant DNA fragments from GM rapeseed expressing the 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) transgene was tracked using PCR. Parental and transgenic (i.e. glyphosphate-tolerant; Roundup Ready, Monsanto Company, St Louis, MO, USA) rapeseed were incubated for 0, 2, 4, 8, 12, 24 and 48 h as whole seeds, cracked seeds, rapeseed meal, and as pelleted, barley-based diets containing 65 g rapeseed meal/kg. The seven transgene fragments ranged from 179 to 527 bp and spanned the entire 1363 bp EPSPS transgene. A 180 bp ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) small subunit fragment and a 466 bp 16S rDNA fragment were used as controls for endogenous rapeseed DNA and bacterial DNA respectively. The limit of detection of the PCR assay, established using negative controls spiked with known quantities of DNA, was 12.5 pg. Production of gas and NH3 was monitored throughout the incubation and confirmed active in vitro fermentation. Bacterial DNA was detected in all sample types at all time points. Persistence patterns of endogenous (Rubisco) and recombinant (EPSPS) rapeseed DNA were inversely related to substrate digestibility (amplifiable for 48, 8 and 4 h in whole or cracked seeds, meal and diets respectively), but did not differ between parental and GM rapeseed, nor among fragments. Detection of fragments was representative of persistence of the whole transgene. No EPSPS fragments were amplifiable in microbial DNA, suggesting that transformation had not occurred during the 48 h incubation. Uptake of transgenic DNA fragments by ruminal bacteria is probably precluded or time-limited by rapid degradation of plant DNA upon plant cell lysis.

3-Phosphoshikimate 1-Carboxyvinyltransferase↗

Electronic properties of Ru(II) complexes bound to a bisphenolate bridge with low lying pi* orbitals.

The synthesis and a detailed investigation into the electronic properties of mononuclear and dinuclear Ru(II) complexes of the ligand bis(2-hydroxyphenyl)-2,5-dihydropyrazine (H(2)BHD) is described. In these complexes the Ru(II) moieties are bound through O,N coordination to an anionic phenolate and the pyrazine bridge. Relatively few reports are available on the dinuclear complexes bridged across a phenolate and this study provides an opportunity to examine the impact of reduced oxygen donor ligands on metal-metal communication. The results presented here reveal some very unusual behavior whereby the apparent location of the LUMO changes between the mononuclear and dinuclear complexes. The lowest energy optical transition appears to involve the peripheral bipyridine ligand as acceptor in the mononuclear complex, whereas this ligand is not involved in the lowest energy optical transition in the dinuclear complex. The origin of this difference is not clear, however, significant changes in the electronic properties of the mononuclear complex are observed on coordination of the second metal, reflected in significant alterations in the electrochemistry of the bridge and metals as well as changes in the optical spectroscopy. The BHD(2-) bridge is shown to support weakly coupled class II behavior according to the Robin and Day classification, reflected in a K(c) of 335.

Journal Article↗

Photophysical and novel charge-transfer properties of adducts between [RuII(bpy)3]2+ and [S2Mo18O62]4-.

The photophysical properties of acetonitrile solutions of [Ru(bpy)(3)](2+) and [S(2)Mo(18)O(62)](4-) are described. We discuss evidence for ion cluster formation in solution and the observation that despite the strong donor ability of the excited state of [Ru(bpy)(3)](2+) and its inherent photolability, adducts with [S(2)Mo(18)O(62)](4-) were photostable. Photophysical studies suggest that the quenching of the [Ru(bpy)(3)](2+) excited state by [S(2)Mo(18)O(62)](4-) occurs via a static mechanism and that binding is largely electrostatic in nature. Evidence is provided from difference spectroscopy and luminescence excitation spectroscopy for good electronic communication between [Ru(bpy)(3)](2+) and [S(2)Mo(18)O(62)](4-) with the presence of a novel, luminescent, inter-ion charge-transfer transition. The identity of the transition is confirmed by resonance Raman spectroscopy.

Journal Article↗

Electrochemical catalysis with redox polymer and polyion-protein films.

Supramolecular redox-active assemblies on electrodes are of fundamental interest and can be used to create functioning devices such as sensors, biosensors, and bioreactors. The ability of redox-active films to mediate electron transfer reactions in 3-D dramatically increases the sensitivity with which target molecules can be determined. Metallopolyion hydrogel films immobilized on electrode surfaces exhibit many properties that are reminiscent of those shown by redox-active proteins. This review discusses the electrochemical properties and applications of such films, including mediating electron transfer between electrodes and oxidase enzymes. In addition, polyion-protein films grown layer by layer have certain advantages in device fabrication, including facilitating direct electron transfer for many proteins, mechanical stability, use of tiny amounts of protein, and control of film architecture. This review presents examples of iron heme proteins in films grown layer by layer by alternate electrostatic adsorption for catalytic reduction of hydrogen peroxide and trichloroacetic acid and for oxidation of styrene.

Electrochemistry↗

Simultaneous direct electrochemiluminescence and catalytic voltammetry detection of DNA in ultrathin films.

Direct electrochemiluminescence (ECL) involving DNA was demonstrated in 10 nm films of cationic polymer [Ru(bpy)(2)(PVP)(10)](2+) assembled layer-by-layer with DNA. A square wave voltammetric waveform oxidized the Ru(II) sites in the metallopolymer to Ru(III), and ECL was measured simultaneously with catalytic voltammetric peaks in a simple apparatus. Significant ECL generation occurred only when guanine bases were present on oligonucleotides in the films. This result along with knowledge of proposed ECL pathways suggests that guanine radicals initially formed by catalytic oxidation of guanines by Ru(III) react with the metallopolymer to produce electronically exited Ru(II) sites in the film. ECL and catalytic SWV peaks were sensitive to oligonucleotide hybridization and chemical DNA damage. Simultaneous linear growth of ECL and SWV peaks occurred after incubation with known DNA damage agent styrene oxide over 20 min. The estimated detection limit was 1 damaged DNA base in 1000. Control incubations of metallopolymer/ds-DNA films in buffer containing unreactive toluene resulted in no significant changes of the ECL or SWV peaks.

Animals↗

Redox and spectroscopic orbitals in Ru(II) and Os(II) phenolate complexes.

A detailed spectroscopic and electrochemical study of a series of novel phenolate bound complexes, of general formulas [M(L-L)(2)(box)](PF(6)), where M is Os and Ru, L-L is 2,2-bipyridine or 2,2-biquinoline, and box is 2-(2-hydroxyphenyl)benzoxazole, is presented. The objectives of this study were to probe the origin of the LUMOs and HOMOs in these complexes, to elucidate the impact of metal and counter ligand on the electronic properties of the complex, and to identify the extent of orbital mixing in comparison with considerably more frequently studied quinoid complexes. [M(L-L)(2)(box)](PF(6)) complexes exhibit a rich electronic spectroscopy extending into the near infrared region and good photostability, making them potentially useful as solar sensitizers. Electrochemistry and spectroscopy indicate that the first oxidation is metal based and is associated with the M(II)/(III) redox states. A second oxidative wave, which is irreversible at slow scan rates, is associated with the phenolate ligand. The stabilities of the oxidized complexes are assessed using dynamic electrochemistry and discussed from the perspective of metal and counter ligand (LL) identity and follow the order of increasing stability [Ru(biq)(2)(box)](+) < [Ru(bpy)(2)(box)](+) < [Os(bpy)(2)(box)](+). Electronic and resonance Raman spectroscopy indicate that the lowest energy optical transition for the ruthenium complexes is a phenolate (pi) to L-L (pi) interligand charge-transfer transition (ILCT) suggesting the HOMO is phenolate based whereas electrochemical data suggest that the HOMO is metal based. This unusual lack of correlation between redox and spectroscopically assigned orbitals is discussed in terms of metal-ligand orbital mixing which appears to be most significant in the biquinoline based complex.

Journal Article↗

Impact of feed processing and mixed ruminal culture on the fate of recombinant EPSP synthase and endogenous canola plant DNA.

The impact of feed processing and in vitro ruminal cultures on the persistence of recombinant and canola-specific endogenous DNA was studied using various canola substrates (whole seed, cracked seed, meal and diet). For both, parental and genetically modified substrates, ribulose-1,5-bisphosphate carboxylase/oxygenase gene was amplifiable up to varying time points. Persistence of recombinant DNA, encoding 5-enolpyruvylshikimate-3-phosphate synthase (1,363 bp) was detected up to 8 h for meal and 4 h for mixed diet. Upon processing of canola, DNA large enough to contain intact plant genes remains. In an in vitro environment, plant DNA was rapidly degraded upon its release into rumen fluid.

3-Phosphoshikimate 1-Carboxyvinyltransferase↗

Diversity and phylogenetic analysis of bacteria in the mucosa of chicken ceca and comparison with bacteria in the cecal lumen.

We reported the first attempt to describe mucosa-associated bacterial populations in the chicken ceca by molecular analysis of 16S rRNA genes. Bacteria in the mucosa were highly diverse but mainly Gram-positive with low G+C. Fusobacterium prausnitzii and butyrate-producing bacteria comprised the largest groups among 116 cloned sequences. Twenty five percent of the clones had less than 95% homology to database sequences. Many sequences were related to those of uncultured bacteria identified in human feces or the bovine rumen. Terminal restriction fragment length polymorphism (T-RFLP) analysis revealed some differences between bacterial populations present in the mucosa and lumen of ceca. Greater resolution of bacterial population was obtained using a culture-independent approach rather than a culture-based approach.

Animals↗

Ground vs. excited state electron transfer: adsorbed monolayers and trimers in solution.

Transient emission spectroscopy has been used to probe the rate of photoinduced electron transfer between metal centres within a novel trimeric complex [[Os(bpy)2(bpe)2][Os(bpy)2Cl]2]4+, where bpy is 2,2'-bipyridyl and bpe is trans-1,2-bis-(4-pyridyl)ethylene. Transient emission experiments on the trimer, and on [Os(bpy)2 (bpe)2]2+ in which the [Os(bpy)2 Cl]+ quenching moieties are absent, reveal that the rate of photoinduced electron transfer (PET) across the bpe bridge is 1.3 +/- 0.1 x 10(8) s(-1). Investigations into the driving forces for oxidation and reduction of the electronically excited state within the trimer indicate that quenching of the [Os(bpy)2 (bpe)2]2+ centre within the trimer involves electron transfer from the [bpe Os(bpy)2 Cl]+ centres to the electronically excited state with a driving force of -0.3 eV. Monolayers of the complex, [Os(bpy)2 bpe pyridine]2+, have been formed by spontaneous adsorption onto platinum microelectrodes and used to probe the dynamics of electron transfer across the trans-1,2-bis-(4-pyridyl)ethylene bridge in the ground state. These monolayers are stable and exhibit well defined voltammetric responses for the Os2+/3+ redox reaction. Cyclic voltammograms recorded at high scan rates can be accurately modelled according to a non-adiabatic electron transfer model based on the Marcus theory using a standard heterogeneous electron transfer rate constant, k(o), of 3.1 +/- 0.2 x 10(4) s(-1) and a reorganization energy of 0.4 +/- 0.1 eV. This rate constant is a factor of approximately two orders of magnitude smaller than that found for photoinduced electron transfer across the same bpe bridge for identical driving forces. This significant difference is interpreted in terms of both the nature of the orbitals involved in electrochemically and optically driven electron transfer, as well as the strength of electronic coupling between two molecular components as opposed to a molecular component and a metal electrode.

Journal Article↗

Carbon composite electrodes: surface and electrochemical properties.

Electrodes based on particulate carbon-epoxy or silicone composites have been formed and characterised using electrochemical methods, scanning electron microscopy and scanning electrochemical microscopy. These composites are rigid, exhibit high electrical conductivity and are stable in organic solvents for prolonged periods. The bulk resistance of the Araldite-M and Araldite-CW2215 based electrodes is low, 130+/-12 and 185+/-15 ohms, respectively. In contrast, the bulk resistance of the silicone based electrodes is 1480+/-112 ohms. The uncompensated resistance of electrochemical cells where the composites act as working electrodes is significantly larger than that expected on the basis of solution resistance alone, i.e., up to 7.5 kohms in the case of the silicone composites. These results are interpreted in terms of the presence of pores within the composite material. The response times of the composite electrodes to changes in the applied potential is between 3.1 and 7.2 ms which, although almost an order of magnitude longer than a comparable glassy carbon electrode, is sufficiently rapid to give useful voltammetric data for scan rates of several V s(-1). Close to ideal reversible cyclic voltammetry is observed for ferrocene under semi-infinite diffusion control for scan rates between 0.01 and 0.1 V s(-1) at the Araldite composites. In contrast, the large resistance associated with the silicone based materials causes quasi-reversible responses to be observed over this range of scan rate. Scan rate dependent cyclic voltammetry and time resolved chronoamperometry responses observed for ferrocene in solution are consistent with those expected for a random array of microelectrodes. Scanning electron microscopy and scanning electrochemical microscopy has been used to image the shape, size and electrochemical activity of the electroactive zones. In the case of Araldite-M, the quality of the electrode surface has been probed by comparing the rate of heterogeneous electron transfer at a composite microelectrode with that found for a carbon fibre electrode. The standard heterogeneous electron transfer rate constant, k degrees , is 6.0+/-0.1 x 10(-3) cm s(-1) for the composite compared to 1.5+/-0.1 x 10(-1) cm s(-1) for the carbon fibre electrode. While the smaller rate constant found for the composite suggests a less pristine surface, k degrees is sufficiently large to support reversible, electron transfer under typical electroanalytical conditions. These fundamental measurements will underpin the development of enzyme based biosensors for use in organic solvents.

Journal Article↗