PubMed Health⌕ Search

Biomedical subjects

Robert M Urban

Publications and source records attributed to Robert M Urban.

16 recordsLinked to original sources
PubMed2006

Effects of implant material and plate design on tendon function and morphology.

Titanium implants are an alternative to stainless steel implants for internal fixation after fracture. The advantages of titanium include decreased implant stiffness, increased bio-compatibility, and diminished stress shielding. However, titanium has been implicated in tendon irritation and adhesions when used in the hand and wrist. We evaluated the relationship between extensor tendon morphology and dorsal plating of the distal radius in a canine model using distal radius pi plates made of stainless steel, titanium, and titanium alloy with a modified ramped edge design. We found marked histologic changes in the tendons and surrounding soft tissues including tendon deformation and degeneration (fibrillation, cartilage metaplasia, hypocellularity and hyalinization of blood vessels), peritendonous adhesions and neovascularity in the parenchyma. Only a minimal inflammatory cell infiltrate was identified and was limited to the tenosynovium and/or paratenon. No differences were identified between titanium and stainless steel implants and those with a ramped design. Although all animals lost wrist motion with time, no differences were observed between groups. Our results suggest that pi plate placement on the dorsal surface of the distal radius may lead to extensor tendon irritation and dysfunction. There is no evidence to suggest that this is specifically related to titanium or plate edge design.

Animals↗
PubMed2006

Wear particles.

Particulate and ionic debris resulting from in vivo degradation of total joint replacement components are recognized as major factors limiting the longevity of the joint reconstruction and the overall success of the procedure. Particulate and ionic wear and corrosion debris have been associated with a locally aggressive biologic response that can lead to synovitis, periprosthetic bone loss, and aseptic loosening of the implants. Furthermore, concerns exist regarding the systemic dissemination of prosthetic debris, including potential effects resulting from end-organ retention. The long-term success of total disc arthroplasty may well depend, at least in part, on the ability to minimize implant debris generation and the subsequent local and systemic response.

Arthroplasty, Replacement↗
PubMed2005

Effect of hip hemiarthroplasty on articular cartilage and bone in a canine model.

The purpose of this study was to determine if acetabular articular cartilage damage occurs in the presence or absence of changes in subchondral plate thickness or porosity and trabecular bone architecture after hip hemiarthroplasty. Eight canines were sacrificed 6 months after receiving unilateral hemiarthroplasties in which a cobalt chrome alloy femoral head was used. The acetabular cartilage, subchondral plate, and trabecular bone were quantitatively evaluated. Although the articular cartilage in the treated hip showed gross and histologic degenerative changes, there were no differences in the treated and contralateral hips in any of the trabecular bone parameters or subchondral plate thickness. However, the subchondral plate porosity was increased 2.6-fold in the treated hip. Therefore, degradation of cartilage can occur in the absence of thickening of the subchondral plate or alterations in the supporting trabecular bone architecture. These observations provide a better understanding of the role that periarticular bone has in the degenerative process after hemiarthoplasty.

Acetabulum↗
PubMed2005

Local and systemic levels of tobramycin delivered from calcium sulfate bone graft substitute pellets.

We asked if tobramycin-loaded calcium sulfate pellets could be used to maintain high local site antibiotic concentrations for an extended period with minimal systemic levels and without adverse effects on vital organs. Calcium sulfate pellets loaded with 10% tobramycin were implanted in contained medullary defects in the proximal humeri of canines. The number of pellets implanted was calculated to yield an equivalent human maximum prescribed dose, and 1.8-fold this dose. These doses converted to approximately 20 mg/kg, and 36 mg/kg, respectively, for the canine. Local and systemic tobramycin levels, pellet resorption, bone response, clinical pathology parameters, and histopathologic responses of potential target organs were analyzed to determine if there was any adverse response for a 28-day period. Serum tobramycin was elevated for less than one day while local levels remained elevated for at least 14 days, and in some animals, 28 days. Tobramycin delivered locally from calcium sulfate pellets had no apparent adverse effect on clinical pathology parameters or on any of the organs that were analyzed. In addition, bone formation and pellet resorption followed patterns typically seen with calcium sulfate materials.

Animals↗
PubMed2004

Accumulation in liver and spleen of metal particles generated at nonbearing surfaces in hip arthroplasty.

Systemic migration of metal particles generated at nonbearing surfaces rather than the intended primary bearing was studied in postmortem specimens from 30 patients with total hip arthroplasty. Using light and electron microscopy with x-ray microanalysis, submicrometer metal particles were identified within macrophages in the liver and/or the spleen in 11 of 15 patients with a revised arthroplasty and in 2 of 15 patients with primary hip arthroplasty. The macrophages formed focal aggregates in the organs without apparent toxicity. Fretting at ancillary fixation devices, loose components, and modular connections can generate a substantial volume of debris. These particles are in addition to those generated at the bearing surfaces, further increasing both the local and systemic particulate burdens. While all components can be associated with the distant spread of particles and metal ions, it is the environment of revision arthroplasty that provides the greatest potential for the generation and systemic dissemination of wear debris. The long-term effects of accumulated wear particles in the liver and spleen are unknown.

Adult↗
PubMed2004

Can metal levels be used to monitor metal-on-metal hip arthroplasties?

In this review, the prospects for using blood, serum, and/or urine metal levels for monitoring the performance of metal-on-metal hip arthroplasty systems are explored. This approach does have substantial potential for serving this function; however, the methodology is technically challenging and the interpretation of the values requires an extensive database with correlative clinical information. At this time, it is premature to recommend metal concentration analysis on a routine clinical basis for patients with metal-on-metal total hip arthroplasties. Nonetheless, metal concentration analysis remains a powerful research tool in the evaluation of metal-on-metal hip arthroplasty systems.

Arthroplasty, Replacement, Hip↗
PubMed2004

Effects of altered crystalline structure and increased initial compressive strength of calcium sulfate bone graft substitute pellets on new bone formation.

A new, modified calcium sulfate has been developed with a different crystalline structure and a compressive strength similar to many calcium phosphate materials, but with a resorption profile only slightly slower than conventional surgical-grade calcium sulfate. A canine bilateral defect model was used to compare restoration of defects treated with the modified calcium sulfate compared to treatment using conventional calcium sulfate pellets after 6, 13, and 26 weeks. The modified calcium sulfate pellets were as effective as conventional calcium sulfate pellets with regard to the area fraction and compressive strength of newly formed bone in the treated bone defects. Mechanical testing demonstrated that the initial compressive strength of the modified material was increased nearly three-fold compared to that of conventional surgical-grade calcium sulfate. This increase potentially allows for its use in a broader range of clinical applications, such as vertebral and subchondral defects.

Animals↗
PubMed2004

An injectable calcium sulfate-based bone graft putty using hydroxypropylmethylcellulose as the plasticizer.

The addition of a plasticizer to synthetic bone graft substitutes can improve handling characteristics, injectability, and the ability to uniformly fill defects. Restoration of large medullary bone defects using an injectable calcium sulfate-based putty using hydroxypropylmethylcellose as the plasticizer was compared to conventional calcium sulfate paste in a canine model. Beginning 2 weeks following implantation, serial clinical and specimen radiographs demonstrated a similar progressive resorption of the implanted materials and replacement with new bone for both the putty and paste forms of calcium sulfate. The area fraction of new bone and remaining implant material in bone defects treated with the putty were not significantly different from defects treated with conventional calcium sulfate paste after 13 and 26 weeks. In addition to its handling characteristics, the putty was biocompatible and as effective as conventional calcium sulfate paste in achieving substantial bony restoration of a large, critical-size bone defect.

Animals↗
PubMed2003

Metal degradation products: a cause for concern in metal-metal bearings?

In the majority of patients, orthopaedic implants are biocompatible. However, there is an increasing recognition that, in the long-term, permanent orthopaedic implants may be associated with adverse local and remote tissue responses in some individuals. These adverse effects are mediated by the degradation products of implant materials. The recent reintroduction of metal-on-metal bearings for total hip arthroplasty has heightened concerns about the biologic response to metal degradation products in light of the fact that the serum and urine metal concentrations in patients with these implants typically are higher than those seen in patients with conventional metal-on-polyethylene bearings. From previous studies of long-term metal-on-metal McKee-Farrar implants, it seems that these elevated levels may persist for the duration of the implant's lifetime. This is of particular concern in the younger and more active patient in whom life expectancy after implantation may exceed 30 years. The association of metal release from orthopaedic implants with any metabolic, bacteriologic, immunologic, or carcinogenic toxicity currently remains conjectural because cause and effect have not been established in human subjects. However, continued surveillance of patient populations with metal implants, particularly those with metal-metal bearings, is warranted.

Foreign Bodies↗
PubMed2003

Restoration of large bone defects using a hard-setting, injectable putty containing demineralized bone particles compared to cancellous autograft bone.

An injectable, hard-setting, calcium sulfate-based putty containing demineralized bone matrix particles (AlloMatrix II, Wright Medical Technology, Inc, Arlington, Tenn) was compared to autogenous cancellous bone graft to evaluate healing in a canine model. Area fraction of new bone, modulus of elasticity, and compressive strength of new bone were evaluated, as was radiographic and histologic healing. Bilateral defects were created in the proximal humeri, and each defect was implanted with either the putty or autogenous bone according to a randomized schedule. Dogs were euthanized at 6, 13, and 26 weeks. The area fraction, modulus of elasticity, and compressive strength of newly formed bone was not significantly different between the putty and autogenous bone at 6, 13, or 26 weeks. The putty had excellent handling characteristics, was biocompatible, and was as effective as autograft bone in achieving near complete bony restoration of a large, critical-sized defect.

Animals↗
PubMed2003

Osseous healing using injectable calcium sulfate-based putty for the delivery of demineralized bone matrix and cancellous bone chips.

Three formulations of injectable calcium sulfate-based putties containing demineralized bone matrix (DBM), 50% DBM/50% cancellous bone (CB) chips, and 30% DBM/70% CB were studied in canines. Four humeral defects per dog were implanted with one of each of the putty formulations while the fourth defect was left untreated. After 6 weeks, the dogs were euthanized. Radiographs and histology showed that the area fraction of new bone in the defects was greater for the three putty formulations than the untreated defects. The area of residual cancellous bone graft remaining in the defects was <10% in both CB putties. Residual calcium sulfate was not apparent in any of the histological sections. We conclude that fast-resorbing calcium sulfate-based putties are effective delivery means of bone graft materials for the successful restoration of bony defects.

Animals↗
PubMed2003

Resorption evaluation of a large bolus of calcium sulfate in a canine medullary defect.

New bone formation and resorption of a calcium sulfate bone graft substitute implanted in five canines were evaluated in this study. Healing was assessed radiographically at 2, 6, and 13 weeks. At 13 weeks, the dogs were sacrificed, and the humeri were retrieved. High-resolution contact radiographs of the isolated humeri were obtained and the bones were sectioned for histology. Radiographically, the calcium sulfate appeared to be completely resorbed and replaced by bone at 13 weeks. Histological findings suggest that a residual amount of calcium sulfate remained, which may continue to act as an osteoconductive scaffolding. No adverse inflammatory response was observed.

Animals↗
PubMed2003

Healing of large defects treated with calcium sulfate pellets containing demineralized bone matrix particles.

Calcium sulfate (OsteoSet, Wright Medical Technology, Inc, Arlington, Tenn) and calcium sulfate/demineralized bone matrix (DBM) pellets (OsteoSet DBM, Wright Medical Technology, Inc) have been evaluated preclinically in a bilateral medullary defect model of a canine humerus. In this model, both short (6 week) and long (26 week) time points have been evaluated. An analysis of bone response to the pellets was conducted using radiological, histological, mechanical, and quantification techniques. The calcium sulfate/DBM pellets exhibited more rapid trabecular bone remodeling as demonstrated by the absence of the ringlet bone structure typically seen with calcium sulfate pellets. We concluded that calcium sulfate and calcium sulfate/DBM pellets are both effective bone graft substitutes.

Animals↗
PubMed2003

The use of acellular dermal matrix as a scaffold for periosteum replacement.

Three preclinical models were used to evaluate GraftJacket Acellular Periosteum Replacement Scaffold (Wright Medical Technology, Inc, Arlington, Tenn). The studies assessed the ability of the acellular dermal matrix to repopulate with cells, revascularize, provide a protected environment for bone defect restoration, and minimize fibrous tissue infiltration. An athymic nude rat muscle implantation study demonstrated a steady increase in cellular repopulation through days 2-21. The formation of blood vessels occurred between days 7-14 in this study. Results from a porcine femoral drill hole study indicated that the scaffold material was intact and adherent to surrounding bone and allowed cellular repopulation and vascular infiltration at a 5-week time period. A preliminary porcine segmental bone defect model at a 6-week time period demonstrated the ability of the scaffold material to protect the bone defect site as revealed by new bone formation within the margins of the defect and adjacent to the scaffold. The segmental model also indicated minimal to no soft tissue invasion into the defect site. The combined studies provided preliminary evidence that the dermal membrane material may be used as a scaffold for periosteum regeneration by allowing for cellular repopulation, revascularization, and bone defect restoration.

Animals↗
PubMed2002

Coventry Award paper. Backsurface wear and deformation in polyethylene tibial inserts retrieved postmortem.

Wear and deformation were characterized at the backsurface of 25 posterior cruciate-retaining total knee arthroplasty polyethylene inserts retrieved postmortem from 20 subjects. The mean implantation time was 64.1 months (range, 4-156 months). The backsurface of the inserts was inspected using a stereomicroscope with a digital optical system. Coronal histologic sections of 13 proximal tibias were inspected for the presence and extent of penetration of granuloma. Damage to the backsurface was limited. Polishing was recorded on 21 (84%) of the inserts and abrasive wear on five (20%) inserts. Pitting was present in 21 (84%) components, but involved less than 1% of the area in all but one of these components. Delamination and cracking were not observed. Extrusions were seen in all 10 of the components that had screw holes in the tibial tray. A correlation was found between the depth of penetration of the granuloma along the posteromedial screw and the height of the corresponding extrusion. The anteroposterior profiles showed a concave deformation of the backsurface in 24 (96 %) of the cases. The concave deformation of tibial inserts may facilitate accumulation and transportation of wear debris to the tibial bone-implant interface through the screw holes in implants designed for cementless fixation.

Aged↗