Biomedical subjects

Roberto A Olsina

Publications and source records attributed to Roberto A Olsina.

14 recordsLinked to original sources

PubMed2005

Determination of lead in human saliva by combined cloud point extraction-capillary zone electrophoresis with indirect UV detection.

A micelle-mediated phase separation without added chelating agents to preconcentrate trace levels of lead in human saliva as a prior step to its determination by capillary electrophoresis has been developed. The enrichment step is based on the cloud point extraction of lead with the non-ionic surfactant PONPE 7.5 in the absence of chelating agent. The surfactant-rich phase was diluted with acetonitrile and the resultant solution was injected directly into the CE instrument. Factors affecting the combined methodology such as surfactant-rich phase diluting agent, buffer pH and concentration, applied voltage, sample preparation and presence of additives were studied in detail. A BGE of 20 mM imidazole containing 30% acetonitrile, pH 6.20 was found to be optimal for the separation of lead from other saliva constituents. Indirect detection was performed at 205 nm. The detection limit value of lead for the preconcentration of 8 ml of saliva was 11.4 microg l(-1). The calibration graph using the preconcentration system was linear with a correlation coefficient of 0.997 at levels near the detection limits up to at least 400 microg l(-1). The reproducibility (R.S.D.) on the basis of migration time and peak area were better than 0.68 and 3.6%, respectively. The method was successfully applied to the determination of lead in human saliva.

Electrophoresis, Capillary↗

PubMed2005

Sensitive detection of salbutamol using europium-enhanced fluorescence with trioctylphosphine oxide (TOPO) as coligand.

In this work a simple and sensitive fluorimetric method for determination of salbutamol (4-[2-(tert-butylamino)-1-hydroxyethyl]-2-(hydroxymethyl) phenol) using an Eu enhanced signal was developed. The employed methodology is based on the formation of a ternary complex formed with Eu, salbutamol and trioctylphosphine oxide (TOPO). Intermolecular transfer of energy from the excited organic molecule to the lanthanide followed by lanthanide emission is responsible for excitation of the lanthanide ion in complex solutions and fluorescent enhancement. The luminescence properties of the ternary complex formed with TOPO and optimum formation conditions were investigated. The calibration curve is linear in the range between 6.92-180 microg l(-1) of salbutamol. The detection limit was 2.31 microg l(-1). Common excipients for these formulations were not found to interfere. A proposed method for the assay in commercial aerosols and nebulizer solutions containing salbutamol was applied with very good precision.

Adrenergic beta-Agonists↗

PubMed2005

Continuous-flow/stopped-flow system using an immunobiosensor for quantification of human serum IgG antibodies to Helicobacter pylori.

Conventional methods, such as gastric biopsy, enzyme-linked immunosorbent assay (ELISA), culture, require a long time for the determination of Helicobacter pylori infections. This study reports an amperometric immunoreactor for rapid and sensitive quantification of human serum immunoglobulin G (IgG) antibodies to H. pylori. Antibodies in the serum sample are allowed to react immunologically with the purified H. pylori antigens that are immobilized on a rotating disk. The bound antibodies are quantified by horseradish peroxidase (HRP) enzyme-labeled second antibodies specific to human IgG. HRP in the presence of hydrogen peroxide catalyzes the oxidation of hydroquinone to p-benzoquinone. The electrochemical reduction back to hydroquinone is detected on a glassy carbon electrode surface at -0.15 V. The electrochemical detection can be done within 1 min, and the analysis time does not exceed 30 min. The calculated detection limits for amperometric detection and the ELISA procedure are 0.6 and 1.9 U ml-1, respectively. The amperometric immunoreactors showed higher sensitivity and lower time consumed than did the standard spectrophotometric detection ELISA method. It can also be used for rapid analysis in conventional and field conditions in biological, physiological, and analytical practices.

Antibodies, Bacterial↗

PubMed2005

Cloud point preconcentration prior to capillary zone electrophoresis: simultaneous determination of platinum and palladium at trace levels.

The incorporation of a cloud point extraction (CPE) step prior to capillary electrophoresis (CE) for simultaneously determining platinum and palladium at sub-microg/L levels is presented and evaluated. The analytes were extracted as 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complexes, at pH 2.0, mediated by micelles of the nonionic surfactant polyethyleneglycolmono-p-nonylphenyl ether (PONPE 7.5). The separation-determination step was developed from 150 microL of the extracted surfactant-rich phase diluted with 50 microL of acetonitrile (ACN). An exhaustive study of the variables affecting the cloud point extraction with PONPE 7.5 and the CZE step was done. The type and composition of the background electrolytes (BGEs) were investigated with respect to separation selectivity, reproducibility, and stability. A BGE of 50 mM monobasic sodium phosphate containing 30% ACN, pH 4.53 was found to be optimal for the separation of metal chelates. Detection was performed at 576 nm. An enrichment factor of 250 was obtained for the preconcentration of 50 mL of sample solution. The detection limits for the preconcentration of 50 mL of sample were 0.04 microg/L for Pt and 0.08 microg/L for Pd. As an analytical demonstration, ultratrace concentrations of platinum and palladium were conveniently quantitated in spiked water and urine samples.

Electrophoresis, Capillary↗

PubMed2005

A new fluorescent assay for enalapril maleate.

A new spectrofluorimetric method for the enalapril maleate monitoring was studied. Enalapril maleate was found to be highly photolabile. This drug was evaluated according to photodegradation assay at pH 2.5 and 6. Enalapril maleate was exposed to UVA-UVB radiations. Under these specific conditions was found as degradation product, the diketopiperazine. The modification of the fluorescent properties of enalapril maleate in solution after exposure UV-radiation and the degradation mechanisms were studied. The photodegradation was followed by the developed spectrofluorimetric assay.

Antihypertensive Agents↗

PubMed2004

Development and validation of a capillary electrophoresis method for the determination of codeine, diphenhydramine, ephedrine and noscapine in pharmaceuticals.

The present work describes a simple, accurate and rapid method for the separation and simultaneous determination of codeine, diphenhydramine, ephedrine and noscapine present in cough-cold syrup formulations by capillary zone electrophoresis. Factors affecting the separation were the buffer pH and concentration, applied voltage, and presence of additives. Separations were carried out in less than 10 min with a 20 mM sodium tetraborate buffer, pH 8.50. The carrier electrolyte gave baseline separation with good resolution, great reproducibility and accuracy. Calibration plots were linear over at least three orders of magnitude of analyte concentrations, the lower limits of detection being within the range 0.42-1.33 microg ml(-1). Detection was performed by UV absorbance at wavelengths of 205 and 250 nm. Quantification of the components in actual syrup formulations was calculated against the responses of freshly prepared external standard solutions. The method was validated and met all analysis requirements of quality assurance and quality control. The procedure was fast and reliable and commercial pharmaceuticals could be analyzed without prior sample clean-up procedure.

Antitussive Agents↗

PubMed2004

Simultaneous determination of dysprosium and iron in urine by capillary zone electrophoresis coupled to cloud point extraction.

Automated preconcentration strategies are needed when analyzing metals in real samples by capillary electrophoresis (CE) with UV detection. The on-line incorporation of cloud point extraction (CPE) to flow injection analysis (FIA) associated with CE for simultaneously determining dysprosium and iron at ppb levels in urine is presented and evaluated for the first time. The preconcentration step is mediated by micelles of the non-ionic surfactant polyethyleneglycol-mono-p-nonylphenylether (PONPE 7.5) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol. The micellar system containing the complex was loaded into the FIA manifold at a flow rate of 8 mlmin(-1), and the surfactant rich-phase was retained in a microcolumn packed with cotton, at pH 9.2. The surfactant-rich phase was eluted with 50 microl acetonitrile directly into the CE sample vial, allowing to reach an enrichment factor of 200-fold for a 10 ml sample urine. The type and composition of the background electrolytes (BGE) were investigated with respect to separation selectivity, reproducibility and stability. A BGE of 20mM sodium tetraborate buffer containing 13% acetonitrile, pH 9.0 was found to be optimal for the separation of metal chelates. Detection was performed at 585 nm. An enhancement factor of 200 was obtained for the preconcentration of 10 ml of sample solution. The detection limits for the preconcentration of 10 ml of urine were 0.20 microgl(-1) for Dy, and. 0.48 microgl(-1) for Fe. The calibration graphs using the preconcentration system were linear with a correlation coefficient of 0.9989 (Dy) and 0.9976 (Fe) at levels near the detection limits up to at least 500 microgl(-1). The method was successfully applied to the determination of dysprosium and iron in urine for monitoring the elimination of dysprosium-based pharmaceuticals.

Dysprosium↗

PubMed2004

Metal content monitoring in Hypericum perforatum pharmaceutical derivatives by atomic absorption and emission spectrometry.

Metals have been investigated in different plant materials in order to establish their normal concentration range and consider their role in plants as part of human medicinal treatment. Metal monitoring as a pattern recognition method is a promising tool in the characterization and/or standardization of phytomedicines. In the present work measurable amounts of Ca, Cu, K, Li, Mg, Mn, Na, Ni, and Zn were detected in phytopharmaceutical derivatives of Hypericum perforatum by atomic techniques. Atomic methodologies like flame atomic absorption spectrometry (FAAS) and electrothermal atomic absorption spectrometry (ETAAS) allow reliable determination of mineral content in pharmaceutical quality control of medicinal plants. Additionally, capillary electrophoresis (CE) patterns of characteristic components (fingerprints) have been performed for the search of adulterants in phytopharmaceutical products.

Flowers↗

PubMed2003

On-line preconcentration and determination of chromium in parenteral solutions by flow injection-flame atomic absorption spectrometry.

An on-line chromium preconcentration and determination system implemented with flame atomic absorption spectrometry (FAAS) associated to flow injection (FI) was studied. For the retention of chromium, 4-(2-Thiazolylazo)-resorcinol (TAR) and Amberlite XAD-16 were used, at pH 5.0. The Cr-TAR complex was removed from the micro-column with ethanol. An enrichment factor of 50 was obtained for the preconcentration of 50 ml of sample solution. The detection limit value for the preconcentration of 50 ml of aqueous solution of Cr was 20 ng l(-1). The precision for ten replicate determinations at the 5 microg l(-1) Cr levels was 2.9% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the preconcentration system for chromium was linear with a correlation coefficient of 0.9997 at levels near the detection limits up to at least 100 microg l(-1). The method was successfully applied to the determination of chromium in parenteral solution samples.

Buffers↗

PubMed2003

Assessment of trace aluminium content in parenteral solutions by combined cloud point preconcentration-flow injection inductively coupled plasma optical emission spectrometry.

A micelle-mediated phase separation without added chelating agents to preconcentrate trace levels of aluminium in parenteral solutions as a prior step to its determination by flow injection inductively coupled plasma optical emission spectrometry has been developed. The enrichment step is based on the cloud point extraction of aluminium with the non-ionic surfactant polyethyleneglycolmono-p-nonylphenylether (PONPE 7.5). The chemical variables affecting the sensitivity of the extractive-spectrometric procedure were studied in detail. After optimization, a preconcentration factor of 200 and a %E higher than 99.9 were achieved. The detection limit (DL) value of aluminium for the preconcentration of 50 ml of parenteral solution was 0.25 microgl(-1). The calibration graph using the preconcentration system for aluminium was linear with a correlation coefficient of 0.9997 at levels near the DLs up to at least 200 microgl(-1). The developed hyphenated assay, which thoroughly satisfies the typical requirements for pharmaceutical control processes, is appropriate to monitor the aluminium concentration in parenteral nutrition.

Aluminum↗

PubMed2002

On-line complexation/cloud point preconcentration for the sensitive determination of dysprosium in urine by flow injection inductively coupled plasma-optical emission spectrometry.

An on-line dysprosium preconcentration and determination system based on the hyphenation of cloud point extraction (CPE) to flow injection analysis (FIA) associated with ICP-OES was studied. For the preconcentration of dysprosium, a Dy(III)-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complex was formed on-line at pH 9.22 in the presence of nonionic micelles of PONPE-7.5. The micellar system containing the complex was thermostated at 30 degrees C in order to promote phase separation, and the surfactant-rich phase was retained in a microcolumn packed with cotton at pH 9.2. The surfactant-rich phase was eluted with 4 mol L(-1) nitric acid at a flow rate of 1.5 mL min(-1), directly in the nebulizer of the plasma. An enhancement factor of 50 was obtained for the preconcentration of 50 mL of sample solution. The detection limit value for the preconcentration of 50 mL of aqueous solution of Dy was 0.03 microg L(-1). The precision for 10 replicate determinations at the 2.0 microg L(-1)Dy level was 2.2% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the preconcentration system for dysprosium was linear with a correlation coefficient of 0.9994 at levels near the detection limits up to at least 100 microg L(-1). The method was successfully applied to the determination of dysprosium in urine.

Artifacts↗

PubMed2002

Simultaneous determination of dextromethorphan, diphenhydramine and phenylephrine in expectorant and decongestant syrups by capillary electrophoresis.

The separation of basic nitrogenous compounds commonly used as active ingredients in cold medicine formulations by micellar electrokinetic capillary chromatography and capillary zone electrophoresis with direct absorptiometric detection was investigated. The type and composition of the background electrolyte (BGE) were investigated with respect to separation selectivity and BGE stability. BGE of 10 mM sodium dihydrogenphosphate-sodium tetraborate buffer containing 10 mM SDS and 10% acetonitrile, pH 9.0 was found to be optimal. Dextromethorphan hydrobhromide, diphenhydramine hydrochloride and phenylephrine hydrochloride were baseline-separated in less than 11 min, giving separation efficiencies of up to 494,000 theoretical plates, reproducibility of corrected peaks areas below 3% relative standard deviation and concentration detection limits from 2.5 to 5.5 microg ml(-1). Detection was performed at 196 and 214 nm.

Chemistry, Pharmaceutical↗

PubMed2002

Determination of cobalt in urine by FI-ICP-AES with online preconcentration.

A method for the preconcentration and determination of cobalt in human urine samples was developed. The online preconcentration and determination were attained using inductively coupled plasma atomic emission spectromety (ICP-AES) coupled to a flow injection (FI) method. Cobalt was retained on an Amberlite XAD-7 resin as cobalt-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complex at pH 9.5. Cobalt was removed from the microcolumn with perchloric acid. A sensitivity enhancement factor of 90 was obtained with respect to cobalt determination by ICP-AES without preconcentration. The value of detection limit for the preconcentration method proposed was 25 ng/L. The precision for 10 replicate determinations at the 5 mg/L (mean +/- SD, 5.1 +/- 0.14) Co level was 2.7% relative standard deviation, calculated from the peak heights obtained. The calibration graph preconcentration method for cobalt was linear with a correlation coefficient of 0.9994 from approximately 0.25 mg/L up to at least 100 mg/L. The method was successfully applied to the determination of cobalt in human urine samples.

Calibration↗

PubMedDate not supplied

On-line preconcentration and determination of cadmium in honey using knotted reactor coupled to flow injection-flame atomic absorption spectrometry.

An on-line cadmium preconcentration and determination system implemented with flame atomic absorption spectrometry (FAAS) associated with flow injection was studied. Cadmium was retained as Cd-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol Cd-(5-Br-PADAP) complex, pH 9.3. The Cd complex was removed from the knotted reactor (KR) with ethanol. A total enhancement factor of 140 was obtained with respect to FAAS (40 for KR and 3.5 due to the use of ethanol) with preconcentration time of 120 s. The detection limit value for preconcentration of 1 g sample was 0.5 ng/g. The repeatability for 10 replicate determinations at 5.0 ng/g Cd level was 3.5% relative standard deviation, calculated from peak heights obtained. The calibration graph using the preconcentration system for Cd was linear with a correlation coefficient of 0.9990 at levels near the detection limits to at least 2000 ng/g. The method was successfully applied to determination of total Cd in honey samples.

Animals↗