PubMed Health⌕ Search

Biomedical subjects

Roberto Lazzaroni

Publications and source records attributed to Roberto Lazzaroni.

At least 19 recordsLinked to original sources
PubMed2006

Chemical and constitutional influences in the self-assembly of functional supramolecular hydrogen-bonded nanoscopic fibres.

A new series of secondary amides bearing long alkyl chains with pi-electron-donor cores has been synthesized and characterised, and their self-assembly upon casting at surfaces has been studied. The different supramolecular assemblies of the materials have been visualized by using atomic force microscopy (AFM) and transmission electron microscopy (TEM). It is possible to obtain well-defined fibres of these aromatic core molecules as a result of the hydrogen bonds between the amide groups. Indeed, by altering the alkyl-chain lengths, constitutions, concentrations and solvent, it is possible to form different rodlike aggregates on graphite. Aggregate sizes with a lower limit of 6-8 nm width have been reached for different amide derivatives, while others show larger aggregates with rodlike morphologies which are several micrometers in length. For one compound that forms nanofibres, doping was performed by using a chemical oxidant, and the resulting layer on graphite was shown to exhibit metallic-like spectroscopy curves when probed with current-sensing AFM. This technique also revealed current maps of the surface of the molecular material. Fibre formation not only takes place on the graphite surface: nanometre scale rods have been imaged by using TEM on a grid after evaporation of solutions of the compounds in chloroform. Molecular modelling proves the importance of the hydrogen bonds in the generation of the fibres, and indicates that the constitution of the molecules is vital for the formation of the desired columnar stacks, results that are consistent with the images obtained by microscopic techniques. The results show the power of noncovalent bonds in self-assembly processes that can lead to electrically conducting nanoscale supramolecular wires.

Journal Article↗
PubMed2006

Noncovalent control for bottom-up assembly of functional supramolecular wires.

Noncovalent bonds have been used to assemble stacks of pi-electron-rich moieties at a surface, generating a pathway for charge transport. The system is comprised of a tetrathiafulvalene (TTF) derivative incorporating two amide groups which fasten the relative orientations of the electroactive moieties in the supramolecular polymer that is formed at the surface of graphite in octanoic acid. Scanning tunneling microscopy (STM) combined with molecular mechanics calculations has been used to prove the structure of the wires, and theory, corroborated with STS experiments, predicts that they are promising superstructures for charge transport.

Journal Article↗
PubMed2006

Effect of interfaces on the alignment of a discotic liquid-crystalline phthalocyanine.

This paper deals with the influence of the nature and number of solid interfaces on the alignment of the columns in a semiconducting discotic liquid crystal. The solid substrates have been characterized in terms of their roughness and surface energy. The alignment of the discotic liquid crystal columns on these substrates has been determined by optical microscopy under crossed polarizers and by tapping-mode atomic force microscopy. The nature of the substrates has negligible influence on the alignment. The key parameter is the confinement imposed to the film. These surprising observations are explained by the antagonist alignment role of gas and solid interfaces.

Journal Article↗
PubMed2006

Functional polymers: scanning force microscopy insights.

Scanning force microscopy (SFM) and related techniques make it possible to visualize polymer systems with a molecular resolution. Beyond imaging, they also enable the unveiling of a variety of (dynamic) physico-chemical properties of both isolated polymer chains and their supramolecular architectures, including structural, mechanical and electronic properties. This article reviews recent progress in the use of SFM on polymers, with a particular emphasis on the mechanical properties of copolymers and single polymer chains, as well as on the bottom-up fabrication of supramolecular polymeric (helical) nanostructures in particular based upon pi-conjugated macromolecules as building blocks for nanoelectronics. Through a detailed understanding of the polymer behavior, we propose solutions for the generation of organic functional (nano)systems.

Journal Article↗
PubMed2006

Chiral amphiphilic self-assembled alpha,alpha'-linked quinque-, sexi-, and septithiophenes: synthesis, stability and odd-even effects.

The synthesis, characterization, and self-assembly in butanol of a series of well-defined alpha,alpha'-linked quinqui-, sexi-, and septithiophenes substituted, via ester links at their termini, by chiral oligo(ethylene oxide) chains carrying an alpha, beta, delta, and epsilon methyl, respectively, are reported. Studies of the self-assembly of these molecules using UV/visible absorption, luminescence, and circular dichroism spectroscopies reveal, for the sexithiophene case, that the magnitude of the observed Cotton effect in the aggregates diminishes progressively as the chiral substituent is moved away from the thiophene segment. The stability of the assemblies increases with the length of the oligothiophene and as the substituent chiral unit is moved away from the aromatic core, being greatest for the unsubstituted case. The sign of the Cotton effect alternates in an "odd/even" manner as the position of the chiral substituent is moved along the oligo(ethylene oxide) chain and on going from the quinquethiophene to the septithiophene having the same side chain. Atomic force microscopy on materials deposited from solution on an aluminum or glass surface and optical measurements show that capsules are formed from the oligothiophenes with H-type packing of the aromatic segments.

Journal Article↗
PubMed2006

Molecule-molecule versus molecule-substrate interactions in the assembly of oligothiophenes at surfaces.

In this paper we present a joint experimental and theoretical approach for the study of the assembly of end-substituted oligothiophenes at surfaces with different polarities (i.e., mica vs graphite). Scanning probe microscopy studies of (sub)monolayer deposits show various types of structures (one-dimensional fibrils, two-dimensional regular layers, and monolayers), depending on the nature of the end groups and the substrate. Using molecular modeling with an atomistic approach, we focus on the interplay between the molecule-molecule (and segment-segment) interactions and the molecule-substrate interactions and their influence on the observed morphologies and the stacking geometry. Such information is relevant for controlling the structural order in thin layers of thiophene oligomers for use in field-effect transistor applications, for example, by modifying the nature of dielectric material over which those compounds are deposited.

Journal Article↗
PubMed2005

Liquid crystalline metal-free phthalocyanines designed for charge and exciton transport.

A joint theoretical and experimental study of the electronic and structural properties of liquid crystalline metal-free phthalocyanines bearing a strong potential for charge and exciton transport has been performed. The synthesis of such compounds has been triggered by quantum chemical calculations showing that: (i) hole transport is favored in metal-free phthalocyanines by their extremely low reorganization energy (0.045 eV) and large electronic splittings; and (ii) the efficiency of energy transfer along the one-dimensional discotic stacks is weakly affected by rotational disorder due to the two-dimensional character of the molecules. We have synthesized two metal-free phthalocyanines with different branched aliphatic chains on the gram scale to allow for a full characterization of their solid-state properties. The two compounds self-organize in liquid crystalline mesophases, as evidenced by optical microscopy, differential scanning calorimetry, X-ray powder diffraction, and molecular dynamics simulations. They exhibit a columnar rectangular mesophase at room temperature and a columnar hexagonal mesophase at elevated temperature.

Journal Article↗
PubMed2005

The conformation of amine- and amide-terminated poly(propylene imine) dendrimers as investigated by molecular simulation methods.

The parameters that influence the conformation of poly(propylene imine) dendrimers were investigated by molecular simulations using molecular mechanics and simulated annealing methods. Dendrimers with two types of peripheral units able to communicate via hydrogen bonding-amine and amide moieties-were considered in order to study the role that secondary interactions among the end groups have in the spatial organization of the dendritic branches. Radial atomic density profiles and radial atomic probability distributions were used to extract global properties, such as the degree of packing of the branches, the distribution of the monomers throughout the molecular volume, and the extent and characteristics of the surface region. Information was also obtained about the nature, location, and extent of formation of the hydrogen bonds, as well as their evolution with dendrimer generation and their assembly into networks. The analyses were supported by a detailed investigation of the first two generations, with an emphasis on the relationship between hydrogen bonding and the compactness and stability of the molecules; this allowed us to account for the generational evolution of hydrogen bonding that is experimentally observed in several poly(propylene imine) dendrimers.

Journal Article↗
PubMed2005

Micellar aggregation in blends of linear and cyclic poly(styrene-b-isoprene) diblock copolymers.

The morphology of micelles formed from blends of linear and cyclic poly(styrene-b-isoprene) (PS-b-PI) block copolymers has been investigated in solution using dynamic light scattering (DLS) and in thin solid deposits by atomic force microscopy (AFM) and transmission electron microscopy under cryogenic conditions (cryo-TEM). Micelles of the pure cyclic PS(290)-b-PI(110) copolymers are wormlike cylindrical objects built by unidirectional aggregation of 33 nm wide sunflower micelles, while the linear block copolymer having the same volume fraction and molar mass forms spherical micelles 40 nm in diameter. The DLS, AFM, and cryo-TEM results consistently show that the addition of the linear copolymer (even for amounts as low as 5% w/w) to the cyclic copolymer rather favors the formation of spherical micelles at the expense of the cylindrical aggregates. Those results clearly show that the linear block copolymer chains can be used to stabilize the thermodynamically unstable elementary sunflower micelle. The thermal stability of the micelles (from the pure copolymers and from the blends) has been examined in solid deposits with in situ AFM measurements. Coalescence starts at about 70 degrees C, and the surface roughness shows a two-step decrease toward a fully homogeneous and flat structure.

Journal Article↗
PubMed2005

Molecular dynamics simulations of nanocomposites based on poly(epsilon-caprolactone) grafted on montmorillonite clay.

Intercalated and exfoliated models of polymer nanocomposites based on poly(epsilon-caprolactone) and functionalized montmorillonite clay are studied by means of molecular dynamics simulations. Intercalated and exfoliated models are considered for probing the structural characteristics of the corresponding nanocomposites prepared by melt intercalation and in situ polymerization, respectively. In the exfoliated system, the organization of the polymer chains onto the clay surface is examined in terms of the density profiles and the order parameter function. A layered structure can clearly be seen to form near the surface with density maxima higher than in amorphous poly(epsilon-caprolactone). This can be viewed as an increase in effective particle thickness, which can contribute to the outstanding gas barrier properties of the exfoliated nanocomposites. The comparison of the structures and energetics of the intercalated model with those of a nanocomposite model based on a nonfunctionalized clay indicates nearly similar characteristics. Nevertheless, the slight differences observed for the interfacial polymer density and clay- and surfactant-polymer binding energies can account for the differences in rheological measurements. The results also suggest that the difference in morphology obtained for the nanocomposites prepared by the two synthetic approaches can be ascribed to both a difference in interfacial polymer density and the formation of bridging polymer chain structures that hinder the exfoliation process.

Journal Article↗
PubMed2005

Nanorubbing of polythiophene surfaces.

This work describes a new orientation method for semicrystalline poly(3-hexylthiophene) (P3HT) thin films, coupling nanorubbing and subsequent crystallization. Using the stylus of an atomic force microscope, we align the polymer chains on P3HT surfaces with a spatial and geometrical control of the oriented domains (nanorubbing). These chain-aligned structures can be made permanent thanks to the crystallization process, which propagates the orientation obtained at the surface to the bulk.

Journal Article↗
PubMed2005

Control of the morphology of linear and cyclic PS-b-PI block copolymer micelles via PS addition.

We have studied the effect of polystyrene (PS) homopolymer addition on the morphology of self-assembled block copolymer micelles made from linear or cyclic poly(styrene-b-isoprene), PS-b-PI, in a selective solvent for the PI block (heptane). Both copolymers have the same composition: the degree of polymerization is 290 for the PS block, and 110 for the PI block, and we focused on the influence of the addition of small amounts of PS homopolymer on the micellar morphology. For the copolymer concentrations considered, the linear copolymer self-organizes into spherical micelles while the cyclic copolymer forms cylindrical micelles. PS and PI chains constitute the core and the corona of these micelles, respectively, due to the different affinity of the blocks for heptane. Consequently, the PS homopolymer added is "solubilized" into the micellar core. Dynamic light scattering (DLS) data combined with atomic force microscopy (AFM) results show that the addition of PS homopolymer induces a drastic change in the micellar organization. Indeed, a morphological transition, from spheres to cylinders for the linear copolymer, and from cylinders to vesicles for the cyclic copolymer, is observed. These results highlight the fact that a small incorporation of PS homopolymer is clearly sufficient to modify the morphology (size and shape) of the micelles. This approach could be a key parameter for the design/control of micelles for specific applications in nanotechnology.

Journal Article↗
PubMed2005

Field-effect transistors based on self-organized molecular nanostripes.

Charge transport properties in organic semiconductors depend strongly on molecular order. Here we demonstrate field-effect transistors where drain current flows through a precisely defined array of nanostripes made of crystalline and highly ordered molecules. The molecular stripes are fabricated across the channel of the transistor by a stamp-assisted deposition of the molecular semiconductors from a solution. As the solvent evaporates, the capillary forces drive the solution to form menisci under the stamp protrusions. The solute precipitates only in the regions where the solution is confined by the menisci once the critical concentration is reached and self-organizes into molecularly ordered stripes 100-200 nm wide and a few monolayers high. The charge mobility measured along the stripes is 2 orders of magnitude larger than the values measured for spin-coated thin films.

Crystallization↗
PubMed2004

Electronic delocalization in discotic liquid crystals: a joint experimental and theoretical study.

Discotic liquid crystals emerge as very attractive materials for organic-based (opto)electronics as they allow efficient charge and energy transport along self-organized molecular columns. Here, angle-resolved photoelectron spectroscopy (ARUPS) is used to investigate the electronic structure and supramolecular organization of the discotic molecule, hexakis(hexylthio)diquinoxalino[2,3-a:2',3'-c]phenazine, deposited on graphite. The ARUPS data reveal significant changes in the electronic properties when going from disordered to columnar phases, the main feature being a decrease in ionization potential by 1.8 eV following the appearance of new electronic states at low binding energy. This evolution is rationalized by quantum-chemical calculations performed on model stacks containing from two to six molecules, which illustrate the formation of a quasi-band structure with Bloch-like orbitals delocalized over several molecules in the column. The ARUPS data also point to an energy dispersion of the upper pi-bands in the columns by some 1.1 eV, therefore highlighting the strongly delocalized nature of the pi-electrons along the discotic stacks.

Journal Article↗
PubMed2004

Controlled polymer grafting on single clay nanoplatelets.

We report on the controlled chemical grafting of well-defined polymer chains onto individual montmorillonite-type clay nanoplatelets and the direct visualization of the formed hybrid material at the nanoscale level. Our approach is based on the use of a surfactant mixture that contains varying proportions of hydroxyl-substituted alkylammonium and unsubstituted alkylammonium cations to exchange the initial Na(+) counterions of the natural montmorillonite. This allows for the exchange of Na(+) by a tunable amount of hydroxyl functions at the surface of the clays. Those functions are then derivatized into aluminum alkoxides in order to initiate the ring-opening polymerization of epsilon-caprolactone directly from the clay surface that was swollen in an organic solvent. Atomic force microscopy measurements on the resulting polymer-grafted nanoplatelets demonstrate the strong dependence of the coating of the individual clay particles with the composition of the surfactant mixture used for the cationic exchange. This allows for the generation of a range of morphologies varying from polymer islands distributed over the clay surface to homogeneous polymer layers thoroughly coating the platelets. Finally, the control that is achievable over the synthesis of this new family of organic-inorganic nanohybrid materials has been extended to the surface grafting of semicrystalline poly(epsilon-caprolactone)-poly(lactic acid) diblock copolymers with defined compositions.

Journal Article↗
PubMed2004

Photophysical properties of ruthenium(II) polyazaaromatic compounds: a theoretical insight.

Quantum-chemical methods are applied to study the nature of the excited states relevant in the photophysical processes (absorption and emission) of a series of polyazaaromatic-ligand-based ruthenium(II) complexes. The electronic and optical properties of the free polyazaaromatic ligands and their corresponding ruthenium(II) complexes are determined on the basis of correlated Hartree-Fock semiempirical approaches. While the emission of complexes containing small-size ligands, such as 1,10-phenanthroline or 2,2'-bipyridine, arises from a manifold of metal-to-ligand charge-transfer triplet states ((3)MLCTs), an additional ligand-centered triplet state ((3)L) is identified in the triplet manifold of complexes containing a pi-extended ligand such as dipyrido[3,2-a:2',3'-c]phenazine, tetrapyrido[3,2-a:2',3'-c:3'',2''-h:2''',3'''-j]phenazine, and 1,10-phenanthrolino[5,6-b]-1,4,5,8,9,12-hexaazatriphenylene. Recent experimental data are interpreted in light of these theoretical results; namely, the origin for the abnormal solvent- and temperature-dependent emission measured in pi-extended Ru complexes is revisited.

Journal Article↗
PubMed2003

Alternating oligo(p-phenylene vinylene)--perylene bisimide copolymers: synthesis, photophysics, and photovoltaic properties of a new class of donor--acceptor materials.

A Suzuki polycondensation reaction has been used to synthesize two copolymers consisting of alternating oligo(p-phenylene vinylene) (OPV) donor and perylene bisimide (PERY) acceptor chromophores. The copolymers differ by the length of the saturated spacer that connects the OPV and PERY units. Photoinduced singlet energy transfer and photoinduced charge separation in these polychromophores have been studied in solution and in the solid state via photoluminescence and femtosecond pump-probe spectroscopy. In both polymers a photoinduced electron transfer occurs within a few picoseconds after excitation of the OPV or the PERY chromophore. The electron transfer from OPV excited state competes with a singlet energy transfer state to the PERY chromophore. The differences in rate constants for the electron- and energy-transfer processes are discussed on the basis of correlated quantum-chemical calculations and in terms of conformational preferences and folding of the two polymers. In solution, the lifetime of the charge-separated state is longer than in the films where geminate recombination is much faster. However, in the films some charges are able to escape from geminate recombination and diffuse away and can be collected at the electrodes when the polymers are incorporated in a photovoltaic device.

Journal Article↗