Biomedical subjects

Rodney Andrews

Publications and source records attributed to Rodney Andrews.

9 recordsLinked to original sources

PubMed2006

Raman spectroscopic investigation of gas interactions with an aligned multiwalled carbon nanotube membrane.

Raman spectroscopy has been used to investigate ethane, propane, and SF6 interactions with an aligned multiwalled carbon nanotube (MWNT) membrane. Pressures of 7.5-9.3 atm and temperatures of 293-333 K were examined for propane and SF6, whereas slightly lower temperatures (263-293 K) and pressures (6.7-7.5 atm) were used for ethane. Red-shifting and broadening is seen for the C-C stretching vibrations of the two hydrocarbons, as well as for the A1g symmetric vibration (nu1) of SF6. These spectral features indicate that the interaction between the gas and the nanotube membrane is capable of perturbing molecular vibrations and creating red-shifted features. Control experiments done on polycrystalline graphite and a polystyrene blank indicate that this spectral behavior is unique to gases interacting with the nanotubes in the membrane.

Journal Article↗

PubMed2006

Augmentation of acrylic bone cement with multiwall carbon nanotubes.

Acrylic bone cement, based on polymethylmethacrylate (PMMA), is a proven polymer having important applications in medicine and dentistry, but this polymer continues to have less than ideal resistance to mechanical fatigue and impact. A variety of materials have been added to bone cement to augment its mechanical strength, but none of these augmentative materials has proven successful. Carbon nanotubes, a new hollow multiwalled tubular material 10-40 nm in diameter, 10-100 microm long, and 50-100 times the strength of steel at 1/6 the weight, have emerged as a viable augmentation candidate because of their large surface area to volume ratio. The objective of this study was to determine if the addition of multiwall carbon nanotubes to bone cement can alter its static or dynamic mechanical properties. Bar-shaped specimens made from six different (0-10% by weight) concentrations of multiwall carbon nanotubes were tested to failure in quasi-static 3-point bending and in 4-point bending fatigue (5 Hz). Analyses of variance and the 3-Parameter Weibull model were used to analyze the material performance data. The 2 wt % MWNT concentration enhanced flexural strength by 12.8% (p=0.003) and produced a 13.1% enhancement in yield stress (p=0.002). Bending modulus increased slightly with the smaller (<5 wt % MWNT) concentrations, but increased 24.1% (p<0.001) in response to the 10 wt % loading. While the 2 wt % loading produced slightly improved quasi-static test results, it was associated with clearly superior fatigue performance (3.3x increase in the Weibull mean fatigue life). Weibull minimum fatigue life (No), Weibull modulus (alpha), and characteristic fatigue life (beta) for bone cement augmented with carbon nanotubes were enhanced versus that observed in the control group. These data unambiguously showed that the bone cement-MWNT polymer system has an enhanced fatigue life compared to "control" bone cement (no added nanotubes). It is concluded that specific multiwall carbon nanotube loadings can favorably improve the mechanical performance of bone cement.

Biocompatible Materials↗

PubMed2005

Nanoscale hydrodynamics: enhanced flow in carbon nanotubes.

Nanoscale structures that could mimic the selective transport and extraordinarily fast flow possible in biological cellular channels would have a wide range of potential applications. Here we show that liquid flow through a membrane composed of an array of aligned carbon nanotubes is four to five orders of magnitude faster than would be predicted from conventional fluid-flow theory. This high fluid velocity results from an almost frictionless interface at the carbon-nanotube wall.

Aquaporins↗

PubMed2005

Light-scattering and dispersion behavior of multiwalled carbon nanotubes.

Elliptically polarized light-scattering measurements were performed to investigate the dispersion behavior of multiwalled carbon nanotubes (MWNT). Xylene- and pyridine-derived MWNT powders were dispersed in water and ethanol in separate optic cells and allowed to sit undisturbed over a two-week time period after probe sonication. Continuous light-scattering measurements taken between scattering angles of 10-170 deg and repeated over several days showed that the nanotubes formed fractal-like networks. The pyridine-derived MWNTs showed greater dispersion variation over time, tending to aggregate and clump much faster than the xylene-derived tubes. The water suspensions appeared much more stable than the ethanol suspensions, which transformed into nonfractal morphology after a few hours. We relate the dispersion stability to size and fringe patterns on the outer surface of the nanotubes. Measured values of fractal dimension were distinctly lower than those in previous studies of single-walled carbon nanotubes. Profiles of both diagonal and off-diagonal scattering matrix elements are presented.

Journal Article↗

PubMed2004

Carbon nanotube aqueous sol-gel composites: enzyme-friendly platforms for the development of stable biosensors.

A new type of composite material based on carbon nanotubes and an aqueous sol-gel process has been developed. The electrochemical characteristics of these composites were investigated and compared to composites made with an alkoxy silane sol-gel process. The use of carbon nanotubes, as the conductive part of the composite, facilitated fast electron transfer rates. The feasibility of this type of composite for the development of biosensors was demonstrated using l-amino acid oxidase. The stability of the enzyme was increased when it was encapsulated in the aqueous sol-gel, and the sensor retained more that 50% of its response after 1 month of testing.

Biosensing Techniques↗

PubMed2004

Protein immobilization on carbon nanotubes through a molecular adapter.

A new approach to the modification of carbon nanotubes with biomolecules for the development of nanoscale biosensors is presented. Alkaline phosphatase was immobilized on the surface of multi-wall carbon nanotubes utilizing a layer-by-layer methodology. Carbon nanotubes were incubated with streptavidin, resulting in the formation of a protein layer on the surface of the nanotubes. Biotinylated alkaline phosphatase was then allowed to bind to streptavidin, anchoring the sensing protein onto the surface. Electrochemical biosensors were constructed by using carbon nanotubes compacted into pellets. 1-Naphthyl phosphate, which is hydrolyzed by alkaline phosphatase to the electroactive 1-naphthol, was used as a substrate. Electrodes constructed in this manner were observed to generate an electrochemical signal that was a function of substrate concentration.

Adsorption↗

PubMed2003

Aligned multiwalled carbon nanotube membranes.

An array of aligned carbon nanotubes (CNTs) was incorporated across a polymer film to form a well-ordered nanoporous membrane structure. This membrane structure was confirmed by electron microscopy, anisotropic electrical conductivity, gas flow, and ionic transport studies. The measured nitrogen permeance was consistent with the flux calculated by Knudsen diffusion through nanometer-scale tubes of the observed microstructure. Data on Ru(NH3)6(3+) transport across the membrane in aqueous solution also indicated transport through aligned CNT cores of the observed microstructure. The lengths of the nanotubes within the polymer film were reduced by selective electrochemical oxidation, allowing for tunable pore lengths. Oxidative trimming processes resulted in carboxylate end groups that were readily functionalized at the entrance to each CNT inner core. Membranes with CNT tips that were functionalized with biotin showed a reduction in Ru(NH3)6(3+) flux by a factor of 15 when bound with streptavidin, thereby demonstrating the ability to gate molecular transport through CNT cores for potential applications in chemical separations and sensing.

Biotin↗

PubMed2002

Multiwall carbon nanotubes: synthesis and application.

Chemical vapor deposition (CVD) is the most promising synthesis route for economically producing large quantities of carbon nanotubes. We have developed a low-cost CVD process for the continuous production of aligned multiwall carbon nanotubes (MWNTs). Here we report the effects of reactor temperature, reaction time, and carbon partial pressure on the yield, purity, and size of the MWNTs produced. A simple method for purifying and healing structural defects in the nanotubes is described. The dispersion of nanotubes in polymer matrices has been investigated as a means of deriving new and advanced engineering materials. These composite materials have been formed into fibers and thin films and their mechanical and electrical properties determined.

Journal Article↗

PubMedDate not supplied

Low-temperature synthesis of large-area CNx nanotube arrays.

Well-aligned nitrogen-doped multiwall carbon nanotube arrays have been successfully grown over large areas on quartz and silicon wafers by floating-catalyst chemical vapor deposition at low temperatures (600 degrees C). These nitrogen-including nanotubes, derived from pyridine-ferrocene mixtures, have smaller outer diameters but larger inner diameters compared with carbon nanotubes grown from a xylene-ferrocene mixture under similar conditions. The N-doped nanotubes exhibit bamboo-like structures in the core. Elemental analysis and electron energy loss spectroscopy analysis show that the as-prepared nanotubes contain as much as 2.62 wt.% N, with most of the N concentrated in the inner few shells of the nanotube. Such large-scale arrays of well-aligned N-doped nanotubes on silicon wafers have a current density as high as 23.8 mA/cm2 at an applied electric field of 17 V/micron, which can be further improved by patterning the tubes and coating the silicon substrate with a conductive thin metal film for the fabrication of flat panel displays.

Crystallization↗