Biomedical subjects

Roger E Marchant

Publications and source records attributed to Roger E Marchant.

23 records · Page 2Linked to original sources

PubMedDate not supplied

Human microvascular endothelial cell growth and migration on biomimetic surfactant polymers.

Successful engineering of a tissue-incorporated vascular prosthesis requires cells to proliferate and migrate on the scaffold. Here, we report on a series of "ECM-like" biomimetic surfactant polymers that exhibit quantitative control over the proliferation and migrational properties of human microvascular endothelial cells (HMVEC). The biomimetic polymers consist of a poly(vinyl amine) (PVAm) backbone with hexanal branches and varying ratios of cell binding peptide (RGD) to carbohydrate (maltose). Proliferation and migration behavior of HMVEC was investigated using polymers containing RGD: maltose ratios of 100:0, 75:25 and 50:50, and compared with fibronectin (FN) coated glass (1 microg/cm2). A radial Teflon fence migration assay was used to examine HMVEC migration at 12 h intervals over a 48 h period. Migration was quantified using an inverted optical microscope, and HMVEC were examined by confocal microscopy for actin and focal adhesion organization/ arrangement. Over the range of RGD ligand density studied (approximately 0.19-0.6 peptides/nm2), our results show HMVEC migration decreases with increasing RGD density in the polymer. HMVEC were least motile on the 100% RGD polymer (approximately 0.38-0.6 peptides/nm2) with an average migration of 0.20 mm2/h in area covered, whereas HMVEC showed the fastest migration of 0.48+/-0.06 mm2/h on the 50% RGD surface ( approximately 0.19-0.30 peptides/nm2). In contrast, cell proliferation increased with increasing surface peptide density; proliferation on the 50% RGD surface was 1.5%+/-0.06/h compared with 2.2%+/-0.07/h on the 100% RGD surface. Our results show that surface peptide density affects cellular functions such as growth and migration, with the highest peptide density supporting the most proliferation but the slowest migration.

Biomimetic Materials↗

PubMedDate not supplied

Molecular interaction studies of hemostasis: fibrinogen ligand-human platelet receptor interactions.

The interactions between fibrinogen ligands and platelet receptor alpha(IIb)beta(3) were studied under physiological conditions by atomic force microscopy (AFM). Two linear peptide sequences in fibrinogen, RGD and HHLGGAKQAGDV, play central roles in the regulation of hemostasis and thrombosis by facilitating adhesion and aggregation of platelets. In order to measure the interactions (i.e., debonding force), oligopeptides, GSSSGaaa, where aaa is -RGDSPA or -HHLGGAKQAGDV, were synthesized and grafted on to the surface of AFM probe tips. The interaction forces between a peptide-modified AFM probe tip and platelet surface were determined from pN to nN levels using AFM force measurements. Our results show that the zero kinetic off-rate, K(off)(0), for RGDSPA is significantly smaller than that for HHLGGAKQAGDV, under the consideration of flexible receptor surfaces. From our analysis, the K(off)(0), the single molecular binding energy E(b), and the transition state x(b), were extracted from the data, and estimated to be 1.53s(-1), -2.64x10(-20)J and 1.03A for the RGD-alpha(IIb)beta(3) system, and 47.58s(-1), 2.67x10(-20), 1.09A for the HHLGGAKQAGDV-alpha(IIb)beta(3) system, respectively.

Amino Acid Sequence↗

PubMedDate not supplied

Synthesis of a lipid conjugate of SO3Le(a) and its enhancement on liposomal binding to activated platelets.

3'-O-Sulfated Le(a) (SO3Le(a)) is one of the most potent natural oligosaccharide ligands of selectins. The specific interactions between SO3Le(a) and E-/P-selectins are critical in the inflammation process. This paper described an efficient synthesis of a lipid conjugate of SO3Le(a) and its combination with phospholipid and cholesterol to form SO3Le(a)-coated liposomes by the freeze-thaw and extrusion method. The size (D = 78 nm) and stability of the resultant glycoliposomes were comparable to that of liposomes without the glycoconjugate. It was further observed that the incorporation of SO3Le(a) into liposomes could significantly enhance their adhesion to activated platelets as a result of the specific binding between SO3Le(a) on the glycoliposome and the P-selectin on activated platelets. The glycoliposome constructs may be useful for antiinflammation or for targeted delivery of drugs to endothelial cells that express E- and P-selectins.

Binding Sites↗

PubMedDate not supplied

Integrin-dependent interaction of human vascular endothelial cells on biomimetic peptide surfactant polymers.

Biomimetic surfactant polymers designed by molecular grafting of pendant RGD peptides (Pep) and dextran oligosaccharides (Dex) in different ratios onto the backbone of poly(vinyl amine) (PVAm) were examined for their ability to promote endothelial cell (EC) growth. Adhesion, formation of focal contacts, and expression of integrin receptors were examined in EC seeded onto a series of novel surfactants containing 100% dextran (PVAm[Pep (0%)]) to 100% peptide (PVAm[Pep (100%)]) compared to fibronectin control. Interaction of EC on polymer was specific, as soluble GRGDSP, but not GRGESP, was able to inhibit both adhesion and spreading of EC. At three hours, EC attachment and spreading were rapid and comparable on fibronectin and PVAm[Pep (100%)], rounded on PVAm[Pep (0%)], and intermediate on PVAm[Pep (25%)], (PVAm[Pep (50%)], and PVAm[Pep (75%)], with increasing peptide ratio favoring more spreading, although all the substrates had similar hydrophilicity. Cells that spread well on fibronectin and PVAm[Pep (100%)] had sharp spikes of vinculin localized at the termination point of actin stress fibers. Formation of stress fibers and focal adhesions on other substrates were correlated with spreading pattern of EC and the peptide content. EC seeded on fibronectin expressed alpha5beta1 integrins all along the stress fibers and throughout the entire cytoskeleton, but this distribution pattern was less prominent on PVAm[Pep (100%)]. However, expression and distribution of vitronectin receptors (alpha(v)beta3) were similar on both fibronectin and PVAm[Pep (100%)], suggesting a strong cell adhesion on PVAm[Pep (100%)]. Viability of EC was also comparable on both fibronectin and PVAm[Pep (100%)] at 24 h. Substrates with high proportion of dextran limited cell adhesion, probably by decreasing protein adsorption. These results suggest that it may be possible to engineer substrates that promote cell adhesion in a receptor-dependent manner while blocking nonspecific protein adsorption, which may have potential as interface materials for prostheses used in cardiovascular system.

Biomimetic Materials↗

PubMedDate not supplied

Human endothelial cell interaction with biomimetic surfactant polymers containing Peptide ligands from the heparin binding domain of fibronectin.

Biomimetic materials that mimic the extracellular matrix (ECM) provide a means to control cellular functions such as adhesion and growth, which are vital to successful engineering of tissue-incorporated biomaterials. Novel "ECM-like" biomimetic surfactant polymers consisting of a poly(vinyl amine) backbone with pendant cell-adhesive peptides derived from one of the heparin-binding domains of fibronectin were developed to improve endothelial cell adhesion and growth on vascular biomaterials. Heparin-binding peptide (HBP) sequences, alone and in combination with RGD peptides, were examined for their ability to promote human pulmonary artery endothelial cell (HPAEC) adhesion and growth (HBP1, WQPPRARI; HBP2, SPPRRARVT; HBP1:RGD; and HBP2:RGD) and compared with cell adhesion and growth on fibronectin and on negative control polymer surfaces in which alanines were substituted for the positively charged arginine residues in the two peptides. The results showed that HPAECs adhered and spread equally well on all HBP-containing polymers and the positive fibronectin control, showing similar stress fiber and focal adhesion formation. However, the HBP alone was unable to support long-term HPAEC growth and survival, showing a loss of focal adhesions and cytoskeletal disorganization by 24 h after seeding. With the addition of RGD, the surfaces behaved similarly or better than fibronectin. The negative control polymers showed little to no initial cell attachment, and the addition of soluble heparin to the medium reduced initial cell adhesion on both the HBP2 and HBP2:RGD surfaces. These results indicate that the HBP surfaces promote initial HPAEC adhesion and spreading, but not long-term survival.

Biocompatible Materials↗