Biomedical subjects

Roger R Markwald

Publications and source records attributed to Roger R Markwald.

9 recordsLinked to original sources

PubMed2004

Cellular recruitment and the development of the myocardium.

The vertebrate embryo experiences very rapid growth following fertilization. This necessitates the establishment of blood circulation, which is initiated during the early somite stages of development when the embryo begins to exhibit three-dimensional tissue organization. Accordingly, the contractile heart is the first functional organ that develops in both the bird and mammalian embryo. The vertebrate heart is quickly assembled as a simple two-layer tube consisting of an outer myocardium and inner endocardium. During embryogenesis, the heart undergoes substantial growth and remodeling to meet the increased circulatory requirements of an adult organism. Until recently, it was thought that all the cells that comprise the muscle of the mature heart could trace their roots back to two bilaterally distributed mesodermal fields within the early gastrula. It is now known that the cellular components that give rise to the myocardium have multiple ancestries and that de novo addition of cardiac myocytes to the developing heart occurs at various points during embryogenesis. In this article, we review what is presently known about the source of the cells that contribute to the myocardium and explore reasons why multiple myocardial cell sources exist.

Animals↗

PubMed2004

Bone morphogenetic protein-2 can mediate myocardial regulation of atrioventricular cushion mesenchymal cell formation in mice.

Transformation of endocardial endothelial cells into invasive mesenchyme is a critical antecedent of cardiac cushion tissue formation. The message for bone morphogenetic protein (BMP)-2 is known to be expressed in myocardial cells in a manner consistent with the segmental pattern of cushion formation [Development 109(1990) 833]. In the present work, we localized BMP-2 protein in atrioventricular (AV) myocardium in mice at embryonic day (ED) 8.5 (12 somite stage) before the onset of AV mesenchymal cell formation at ED 9.5. BMP-2 protein expression was absent from ventricular myocardium throughout the stages examined. After cellularization of the AV cushion at ED 10.5, myocardial BMP-2 protein expression was diminished in AV myocardium, whereas cushion mesenchymal cells started expressing BMP protein. Expression of BMP-2 in cushion mesenchyme persisted during later stages of development, ED 13.5-16, during valuvulogenesis. Intense expression of BMP-2 persisted in the valve tissue in adult mice. Based on the expression pattern, we performed a series of experiments to test the hypothesis that BMP-2 mediates myocardial regulation of cardiac cushion tissue formation in mice. When BMP-2 protein was added to the 16-18 somite stage (ED 9.25) AV endocardial endothelium in culture, cushion mesenchymal cells were formed in the absence of AV myocardium, which invaded into collagen gels and expressed the mesenchymal marker, smooth muscle (SM) alpha-actin; whereas the endothelial marker, PECAM-1, was lost from the invaded cells. In contrast, when noggin, a specific antagonist to BMPs, was applied together with BMP-2 to the culture medium, AV endothelial cells remained as an epithelial monolayer with little expression of SM alpha-actin, and expression of PECAM-1 was retained in the endocardial cells. When noggin was added to AV endothelial cells cocultured with associated myocardium, it blocked endothelial transformation to mesenchyme. AV endothelium treated with BMP-2 expressed elevated levels of TGFbeta-2 in the absence of myocardium, as observed in the endothelium cocultured with myocardium. BMP-2-supported elevation of TGFbeta-2 expression in endocardial cells was abolished by noggin treatment. These data indicated that BMP signaling is required in and BMP-2 is sufficient for myocardial segmental regulation of AV endocardial cushion mesenchymal cell formation in mice.

Animals↗

PubMed2004

Engineering biological structures of prescribed shape using self-assembling multicellular systems.

Self-assembly is a fundamental process that drives structural organization in both inanimate and living systems. It is in the course of self-assembly of cells and tissues in early development that the organism and its parts eventually acquire their final shape. Even though developmental patterning through self-assembly is under strict genetic control it is clear that ultimately it is physical mechanisms that bring about the complex structures. Here we show, both experimentally and by using computer simulations, how tissue liquidity can be used to build tissue constructs of prescribed geometry in vitro. Spherical aggregates containing many thousands of cells, which form because of tissue liquidity, were implanted contiguously into biocompatible hydrogels in circular geometry. Depending on the properties of the gel, upon incubation, the aggregates either fused into a toroidal 3D structure or their constituent cells dispersed into the surrounding matrix. The model simulations, which reproduced the experimentally observed shapes, indicate that the control parameter of structure evolution is the aggregate-gel interfacial tension. The model-based analysis also revealed that the observed toroidal structure represents a metastable state of the cellular system, whose lifetime depends on the magnitude of cell-cell and cell-matrix interactions. Thus, these constructs can be made long-lived. We suggest that spherical aggregates composed of organ-specific cells may be used as "bio-ink" in the evolving technology of organ printing.

Animals↗

PubMed2004

Identification and detection of the periostin gene in cardiac development.

Periostin, a member of the fasciclin gene family, acts as a cell adhesion molecule through binding to cell surface integrins. Periostin expression has previously been shown to increase substantially following transforming growth factor beta (TGF-beta) and bone morphogenetic protein stimulation. As these molecules are indispensable for cardiac development, we sought to clone the chicken ortholog of periostin and evaluate its spatiotemporal expression pattern during heart morphogenesis. We show by Northern analysis, whole mount and section in situ hybridization experiments that periostin is predominantly expressed in the developing endothelium of the ventricular trabeculae as well as in the endothelium and mesenchyme of the outflow tract and atrioventricular endocardial cushions. Cardiac expression continues into fetal development where periostin is seen predominantly in the valve leaflets and supporting chordae tendinae.

Amino Acid Sequence↗

PubMed2004

Periostin is expressed within the developing teeth at the sites of epithelial-mesenchymal interaction.

Periostin was originally isolated as an osteoblast-specific factor that functions as a cell adhesion molecule for preosteoblasts and is thought to be involved in osteoblast recruitment, attachment, and spreading. The protein was renamed "periostin" because of its expression in the periosteum and periodontal ligament, indicating a potential role in bone and maintenance of tooth structure. Periostin has structural similarity to insect fasciclin-I and can be induced by TGF-beta and Bmp2. Because tooth and periodontium development is a well-described genetic model for organogenesis governed by a reciprocal set of epithelial-mesenchymal interactions, thought to be controlled by various TGF-beta superfamily members, we investigated whether periostin is present during tooth morphogenesis. Both periostin mRNA and protein expression were analyzed throughout normal tooth development (embryonic day [E] 9.5-newborn) and within both Bmp4- and Msx2-null embryos. Periostin mRNA is initially present within the E9.5 first branchial arch epithelium and then shifts to underlying ectomesenchyme. Both mRNA and protein are asymmetrically localized to the lingual/palatal and buccal side during the early epithelial-mesenchymal interactions. Periostin is also present in dental papilla cells and within the trans-differentiating odontoblasts during the bell and hard tissue formation stages of tooth development. We suggest that periostin plays multiple roles as a primary responder molecule during tooth development and may be linked to deposition and organization of other extracellular matrix adhesion molecules during maintenance of the adult tooth, particularly at the sites of hard-soft tissue interface.

Animals↗

PubMed2003

Endodermal growth factors promote endocardial precursor cell formation from precardiac mesoderm.

We previously demonstrated that the initial emergence of endocardial precursor cells (endocardial angioblasts) occurred within the precardiac mesoderm and that the endodermal secretory products promoted delamination of cells from the precardiac mesoderm and expression of endothelial lineage markers [Dev. Biol. 175 (1996), 66]. In this study, we sought to extend our original study to the identification of candidate molecules derived from the endoderm that might have induced endocardial precursor cell formation. We have detected expression of transforming growth factors beta (TGFbeta) 2, 3, and 4 in anterior endoderm at Hamburger and Hamilton (H-H) stage 5 by RT-PCR. To address the role of growth factors known to be present in the endoderm, precardiac mesodermal explants were isolated from H-H stage 5 quail embryos and cultured on the surface of collagen gels with serum-free defined medium 199. Similar to the effect of explants cocultured with anterior endoderm, when cultured with TGFbetas 1-3 (3 ng/ml each), explants formed QH-1 (anti-quail endothelial marker)-positive mesenchymal cells, which invaded the gel and expressed the extracellular marker, cytotactin (tenascin). Another member of the TGFbeta superfamily, bone morphogenetic protein-2 (BMP-2; 100 ng/ml), did not induce QH-1-positive mesenchymal cell formation but promoted formation of an epithelial monolayer on the surface of the collagen gel; this monolayer did not express QH-1. Explants treated with vascular endothelial growth factor (VEGF(165), 100 ng/ml) also did not invade the gel but formed an epithelial-like outgrowth on the surface of the gel. However, this monolayer did express the QH-1 marker. Fibroblast growth factor-2 (FGF-2; 250 ng/ml)-treated explants expressed QH-1 and exhibited separation of the cells on the surface of the gel. Finally, a combination of TGFbetas and VEGF enhanced formation of QH-1-positive cord-like structures within the gel from mesenchyme that had previously invaded the gel. Luminization of the cords, however, was not clearly evident. These findings suggest that TGFbetas, among the growth factors tested, mediate the initial step of endocardial formation, i.e., delamination of endothelial precursor cells from precardiac mesoderm, whereas VEGF may primarily effect early vasculogenesis (cord-like structure formation).

Animals↗

PubMed2003

Fibroblast growth factor (FGF)-4 can induce proliferation of cardiac cushion mesenchymal cells during early valve leaflet formation.

While much has been learned about how endothelial cells transform to mesenchyme during cardiac cushion formation, there remain fundamental questions about the developmental fate of cushions. In the present work, we focus on the growth and development of cushion mesenchyme. We hypothesize that proliferative expansion and distal elongation of cushion mesenchyme mediated by growth factors are the basis of early valve leaflet formation. As a first step to test this hypothesis, we have localized fibroblast growth factor (FGF)-4 protein in cushion mesenchymal cells at the onset of prevalve leaflet formation in chick embryos (Hamburger and Hamilton stage 20-25). Ligand distribution was correlated with FGF receptor (FGFR) expression. In situ hybridization data indicated that FGFR3 mRNA was confined to the endocardial rim of the atrioventricular (AV) cushion pads, whereas FGFR2 was expressed exclusively in cushion mesenchymal cells. FGFR1 expression was detected in both endocardium and cushion mesenchyme as well as in myocardium. To determine whether the FGF pathways play regulatory roles in cushion mesenchymal cell proliferation and elongation into prevalvular structure, FGF-4 protein was added to the cushion mesenchymal cells explanted from stage 24-25 chick embryos. A significant increase in proliferative ability was strongly suggested in FGF-4-treated mesenchymal cells as judged by the incorporation of 5'-bromodeoxyuridine (BrdU). To determine whether cushion cells responded similarly in vivo, a replication-defective retrovirus encoding FGF-4 with the reporter, bacterial beta-galactosidase was microinjected into stage 18 chick cardiac cushion mesenchyme along the inner curvature where AV and outflow cushions converge. As compared with vector controls, overexpression of FGF-4 clearly induced expansion of cushion mesenchyme toward the lumen. To further test the proliferative effect of FGF-4 in cardiac cushion expansion in vivo (ovo), FGF-4 protein was microinjected into stage 18 chick inner curvature. An assay for BrdU incorporation indicated a significant increase in proliferative ability in FGF-4 microinjected cardiac cushion mesenchyme as compared with BSA-microinjected controls. Together, these results suggest a role of FGF-4 for cardiac valve leaflet formation through proliferative expansion of cushion mesenchyme.

Animals↗

PubMed2003

Cell and organ printing 2: fusion of cell aggregates in three-dimensional gels.

We recently developed a cell printer (Wilson and Boland, 2003) that enables us to place cells in positions that mimic their respective positions in organs. However, this technology was limited to the printing of two-dimensional (2D) tissue constructs. Here we describe the use of thermosensitive gels to generate sequential layers for cell printing. The ability to drop cells on previously printed successive layers provides a real opportunity for the realization of three-dimensional (3D) organ printing. Organ printing will allow us to print complex 3D organs with computer-controlled, exact placing of different cell types, by a process that can be completed in several minutes. To demonstrate the feasibility of this novel technology, we showed that cell aggregates can be placed in the sequential layers of 3D gels close enough for fusion to occur. We estimated the optimum minimal thickness of the gel that can be reproducibly generated by dropping the liquid at room temperature onto a heated substrate. Then we generated cell aggregates with the corresponding (to the minimal thickness of the gel) size to ensure a direct contact between printed cell aggregates during sequential printing cycles. Finally, we demonstrated that these closely-placed cell aggregates could fuse in two types of thermosensitive 3D gels. Taken together, these data strongly support the feasibility of the proposed novel organ-printing technology.

Animals↗

PubMed2003

Organ printing: computer-aided jet-based 3D tissue engineering.

Tissue engineering technology promises to solve the organ transplantation crisis. However, assembly of vascularized 3D soft organs remains a big challenge. Organ printing, which we define as computer-aided, jet-based 3D tissue-engineering of living human organs, offers a possible solution. Organ printing involves three sequential steps: pre-processing or development of "blueprints" for organs; processing or actual organ printing; and postprocessing or organ conditioning and accelerated organ maturation. A cell printer that can print gels, single cells and cell aggregates has been developed. Layer-by-layer sequentially placed and solidified thin layers of a thermo-reversible gel could serve as "printing paper". Combination of an engineering approach with the developmental biology concept of embryonic tissue fluidity enables the creation of a new rapid prototyping 3D organ printing technology, which will dramatically accelerate and optimize tissue and organ assembly.

Artificial Organs↗