Structure and stability of molybdenum sulfide fullerenes.
Explore the source record for details and available documents.
Journal Article↗
Biomedical subjects
Ronit Popovitz-Biro
Publications and source records attributed to Ronit Popovitz-Biro.
Structural characterization of modern and fossilized charcoal produced in natural fires as determined by using electron energy loss spectroscopy.
Charcoal produced in natural fires is widespread, but surprisingly little is known about its structure and stability. TEM and electron energy loss spectroscopy (EELS) were used to characterize the organized graphite-like microcrystallites and amorphous nonorganized phases of modern charcoal that had been produced in natural fires. In addition, a semiordered structure was identified in two modern charcoal samples. Fossilized charcoal contains fewer graphite-like microcrystallites than modern samples. EELS spectra confirmed that the dominant structure in fossilized charcoal is amorphous carbon. EELS measurements also revealed that only the nonorganized phase contains oxygen, which indicates that the degradation of the fossilized charcoal structure occurs mainly through oxidation processes. The few graphite-like microcrystallites found in fossilized charcoal were composed of onion-like structures that are probably less prone to oxidation owing to their rounded structures.
Charcoal↗
Titanium phosphonate porous materials constructed from dendritic tetraphosphonates.
An organic-inorganic hybrid material, TPPhA-Ti, was constructed by non-hydrolytic condensation of a dendritic tetrakis-1,3,5,7-(4-phosphonatophenyl)adamantane precursor and titanium(IV) isopropoxide. One preparative pathway yielded insoluble materials with a Ti/P ratio of approximately 1 which was confirmed by a combination of FT-IR, TGA, and EDS measurements. N2 sorption experiments showed that TPPhA-Ti is a porous solid (micropores approximately 13 A; mesopores approximately 38 A) with a high surface area, approximately 550 m2 g(-1). The structure and morphology of the TPPhA-Ti as investigated by transmission and scanning electron microscopy showed a layered-type material. Additional X-ray diffraction data suggest a paracrystalline material; an optimization of possible molecular arrangements of TPPhA-Ti was simulated that was in agreement with the experimental data. A second preparative pathway yielded a Ti oxide-phosphonate with a Ti/P ratio of approximately 3.4. Both TEM and SEM revealed that hollow nanospheres were formed with diameters of approximately 180-300 nm.
Journal Article↗
Micelle directed synthesis of polyoxometalate nanoparticles and their improved catalytic activity for the aerobic oxidation of sulfides.
Micelle directed polyoxometalate nanoparticles were synthesized by depositing H3+xPVxMo12-xO40 (x = 0, 2) by precipitation on micelles prepared from cesium dodecyl sulfate. The cryo-TEM image showed particles of about approximately 10 nm roughly consistent with the particle size computed from an idealized model. HRTEM coupled with EELS imaging to map the distribution of the elements also supported the formation of micelle directed polyoxometalate nanoparticles. In the aerobic oxidation of various sulfides to sulfoxides and sulfones, the clustered polyoxometalate assemblies supported on hydrophilic silica showed significantly higher catalytic activity versus that of nonclustered assemblies.
Journal Article↗
Preparation and structural characterization of stable Cs2O closed-cage structures.
Explore the source record for details and available documents.
Journal Article↗
Coordination-based gold nanoparticle layers.
Gold nanoparticle (NP) mono- and multilayers were constructed on gold surfaces using coordination chemistry. Hydrophilic Au NPs (6.4 nm average core diameter), capped with a monolayer of 6-mercaptohexanol, were modified by partial substitution of bishydroxamic acid disulfide ligand molecules into their capping layer. A monolayer of the ligand-modified Au NPs was assembled via coordination with Zr4+ ions onto a semitransparent Au substrate (15 nm Au, evaporated on silanized glass and annealed) precoated with a self-assembled monolayer of the bishydroxamate disulfide ligand. Layer-by-layer construction of NP multilayers was achieved by alternate binding of Zr4+ ions and ligand-modified NPs onto the first NP layer. Characterization by atomic force microscopy (AFM), ellipsometry, wettability, transmission UV-vis spectroscopy, and cross-sectional transmission electron microscopy showed regular growth of NP layers, with a similar NP density in successive layers and gradually increased roughness. The use of coordination chemistry enables convenient step-by-step assembly of different ligand-possessing components to obtain elaborate structures. This is demonstrated by introducing nanometer-scale vertical spacing between a NP layer and the gold surface, using a coordination-based organic multilayer. Electrical characterization of the NP films was carried out using conductive AFM, emphasizing the barrier properties of the organic spacer multilayer. The results exhibit the potential of coordination self-assembly in achieving highly controlled composite nanostructures comprising molecules, NPs, and other ligand-derivatized components.
Gold↗
One-step synthesis of core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles.
Core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles were synthesized by mixing Fe(CO)(5) and Cr(CO)(6) in the 9:1 ratio. These particles exhibit narrow size distribution with 13.5 nm as mean diameter and uniform spherical shape. The TEM image, which is in good agreement with the synchrotron powder XRD pattern, reveals the heterogeneous nature (core/shell structure). The analysis of the pattern reveals gamma-Fe(2)O(3) structure and a metal crystal structure. Mossbauer spectra, which support the superparamagnetic behavior determined by H-M measurement, do not show any traceable amount of Fe(0). This suggests that the metal component is Cr. EELS analysis and iron mapping suggest controlled stoichiometry and also confirm a core made of Cr and a shell made of gamma-Fe(2)O(3).
Journal Article↗
Synthesis of fullerene-like tantalum disulfide nanoparticles by a gas-phase reaction and laser ablation.
Motivated by the discovery of the C(60) molecule (buckminsterfullerene), the search for inorganic counterparts of this closed-cage nanostructure started in 1992 with the discovery of nested fullerene-like nanoparticles of WS(2). Inorganic fullerene-like (IF) materials have since been found in numerous two-dimensional compounds and are available in a variety of shapes that offer major applications such as in lubricants and nanocomposites. Various synthetic methodologies have been employed to achieve the right conditions for the constricted or templated growth needed for the occurrence of this new phase. In this study, IF-TaS(2) is produced from a volatile chloride precursor in the gas phase and in small yield by room temperature laser ablation both in argon and in liquid CS(2). For the gas-phase reaction, a high yield of IF nanoparticles was obtained between 400 and 600 degrees C with a low concentration of the precursor gas. The average size and the yield of the IF-TaS(2) nanoparticles decrease with temperature. Above 600 degrees C, IF nanoparticles were found in low yields and at sizes below 20 nm. The stability of the IF nanoparticles produced by the gas-phase reaction is discussed in the light of two existing theoretical models. Laser ablation in argon leads to IF nanoparticles filled with clusters of TaS(2). Agglomeration of the nanoparticles can be avoided by laser ablation in liquid CS(2).
Argon↗
Layer-by-layer assembly of ordinary and composite coordination multilayers.
Coordination self-assembly of bishydroxamate-based metal-organic multilayers on gold employing a layer-by-layer (LbL) approach was investigated. It is shown that the solution chemistry of the participating metal ion has a marked influence on the composition and properties of the multilayers. Use of Ce4+ and particularly zirconium(IV) acetylacetonate (Zr(acac)4) solutions in the ion-binding step of multilayer construction leads to multilayers with a near-stoichiometric metal ion-to-ligand ratio, suggesting a structure close to that predicted by a simple coordination self-assembly scheme. On the other hand use of a ZrCl4 solution as the source of metal ions in the multilayer construction leads to a multilayer with greater thickness and a large excess of Zr(IV), evenly distributed between the organic layers. In the latter case, a ratio of ca. 1:2 between the excess Zr and oxygen, as well as long-term Zr4+ binding experiments showing deposition of ZrO2, suggest the formation of a zirconia-type nanophase between the bishydroxamate organic repeat units during multilayer self-assembly. Hence, while the multilayer prepared using Zr(acac)4 solution appears to represent a "true" coordination-based structure, the one prepared using ZrCl4 is best described as a composite organic-ceramic multilayer. Composite multilayers prepared in this way display different properties from those of the stoichiometric ones, such as improved dielectric behavior and higher stiffness. Even greater mechanical stability is obtained with multilayers constructed using alternate binding of ZrCl4 and Ce4+. The concept of LbL formation of coordination-based composite organic-ceramic structures may be useful in obtaining nanometer-scale structures with tunable properties.
Cesium↗
Childhood macrophagic myofasciitis-consanguinity and clinicopathological features.
Macrophagic myofasciitis has been almost exclusively detected in adults only. We describe six children of Arab Moslem origin with this disorder. Three presented with hypotonia, developmental delay and seizures and were evaluated for a mitochondrial disorder. The other three children had hypotonia and predominantly motor delay. Five of the six families were consanguineous. A massive collection of macrophages was present in the fascia and adjacent epimysium in all biopsies. The macrophages were periodic-acid-Schiff positive and immunoreactive for CD68. One biopsy which was evaluated by electron microscopy and energy-dispersive X-ray microanalysis showed crystalline structures containing aluminum in macrophages. Two children with motor delay and hypotonia were treated with oral prednisone for 3 months with no clinical improvement. Genetic predisposition probably accounts for the variability in the prevalence of macrophagic myofasciitis in different populations. At least in childhood, there seems to be no connection between macrophagic myofasciitis as a pathological entity and the clinical symptoms and signs.
Aluminum↗
Synthesis of SnS2/SnS fullerene-like nanoparticles: a superlattice with polyhedral shape.
Tin disulfide pellets were laser ablated in an inert gas atmosphere, and closed cage fullerene-like (IF) nanoparticles were produced. The nanoparticles had various polyhedra and short tubular structures. Some of these forms contained a periodic pattern of fringes resulting in a superstructure. These patterns could be assigned to a superlattice created by periodic stacking of layered SnS(2) and SnS. Such superlattices are reminiscent of misfit layer compounds, which are known to form tubular morphologies. This mechanism adds up to the established mechanism for IF formation, namely, the annihilation of reactive dangling bonds at the periphery of the nanoparticles. Additionally, it suggests that one of the driving forces to form tubules in misfit compounds is the annihilation of dangling bonds at the rim of the layered structure.
Journal Article↗
Carbon-carbon and carbon-nitrogen coupling reactions catalyzed by palladium nanoparticles derived from a palladium substituted Keggin-type polyoxometalate.
Palladium 15-20 nm particles stabilized by a Keggin-type polyoxometalate were prepared by reduction of K(5)PPdW(11)O(39) with H(2). The nanoparticles were shown to be effective catalysts for Suzuki-, Heck-, and Stille-type carbon-carbon coupling and carbon-nitrogen coupling reactions of bromoarenes in aqueous media. Chloroarenes were also reactive in reaction media without solvent. [reaction: see text]
Journal Article↗
Alkali metal intercalated fullerene-like MS(2) (M = W, Mo) nanoparticles and their properties.
Layered metal disulfides-MS(2) (M = Mo, W) in the form of fullerene-like nanoparticles and in the form of platelets (crystallites of the 2H polytype) have been intercalated by exposure to alkali metal (potassium and sodium) vapor using a two-zone transport method. The composition of the intercalated systems was established using X-ray energy dispersive spectrometer and X-ray photoelectron spectroscopy (XPS). The alkali metal concentration in the host lattice was found to depend on the kind of sample and the experimental conditions. Furthermore, an inhomogeneity of the intercalated samples was observed. The product consisted of both nonintercalated and intercalated phases. X-ray diffraction analysis and transmission electron microscopy of the samples, which were not exposed to the ambient atmosphere, showed that they suffered little change in their lattice parameters. On the other hand, after exposure to ambient atmosphere, substantial increase in the interplanar spacing (3-5 A) was observed for the intercalated phases. Insertion of one to two water molecules per intercalated metal atom was suggested as a possible explanation for this large expansion along the c-axis. Deintercalation of the hydrated alkali atoms and restacking of the MS(2) layers was observed in all the samples after prolonged exposure to the atmosphere. Electric field induced deintercalation of the alkali metal atoms from the host lattice was also observed by means of the XPS technique. Magnetic moment measurements for all the samples indicate a diamagnetic to paramagnetic transition after intercalation. Measurements of the transport properties reveal a semiconductor to metal transition for the heavily K intercalated 2H-MoS(2). Other samples show several orders of magnitude decrease in resistivity and two- to five-fold decrease in activation energies upon intercalation. These modifications are believed to occur via charge transfer from the alkali metal to the conduction band of the host lattice. Recovery of the pristine compound properties (diamagnetism and semiconductivity) was observed as a result of deintercalation.
Journal Article↗
Hybrid composites of monodisperse pi-conjugated rodlike organic compounds and semiconductor quantum particles.
Composite materials of quantum particles (Q-particles) arranged in layers within crystalline powders of pi-conjugated, rodlike dicarboxylic acids are reported. The synthesis of the composites, either as three-dimensional crystals or as thin films at the air-water interface, comprises a two-step process: 1) The preparation of the Cd salts 6 (Cd), 8 (Cd) or Pb salts 6 (Pb), 8 (Pb) of the oligo(p-phenyleneethynylene)dicarboxylic acids 6 (H), 8 (H), in which the metal ions are arranged in ribbons and are separated by the long axis of the organic molecules, as demonstrated by X-ray powder diffraction analysis of the solids and grazing incidence X-ray diffraction analysis of the films on water. 2) Topotactic solid/gas reaction of these salts with H(2)S to convert the metal ions into Q-particles of CdS or PbS embedded in the organic matrix that consists of the acids 6 (H) and 8 (H). These hybrid materials have been characterized by X-ray photoelectron spectroscopy and transmission electron microscopy.
Journal Article↗