Biomedical subjects

Ruben Kretzschmar

Publications and source records attributed to Ruben Kretzschmar.

18 recordsLinked to original sources

PubMed2007

Plant availability of zinc and copper in soil after contamination with brass foundry filter dust: effect of four years of aging.

We investigated the effect of 4 yr of aging of a noncalcareous soil contaminated with filter dust from a brass foundry (80% w/w ZnO, 15% w/w Cu0.6Zn0.4) on the chemical extractability of Zn and Cu and their uptake by barley (Hordeum vulgare L.), pea (Pisum sativum L.), and sunflower (Helianthus annus L.). Pot experiments were conducted with the freshly contaminated soil (2250 mg kg-1 Zn; 503 mg kg-1 Cu), with the contaminated soil aged for 4 yr in the field (1811 mg kg-1 Zn; 385 mg kg-1 Cu), and with the uncontaminated control soil (136 mg kg-1 Zn; 32 mg kg-1 Cu). In comparison with the uncontaminated soil, the growth of barley and pea was clearly reduced in both contaminated soils, while toxicity symptoms did not systematically vary from the freshly contaminated to the 4 yr aged soil. The sunflower did not grow in the contaminated soils. The slow oxidative dissolution of the brass platelets led to an increase in the solubility and the plant uptake of Cu from the freshly contaminated to the 4 yr aged soil. In an earlier study, we found that the fine-grained ZnO dissolved in the field soil within 9 mo and that about half of the released Zn was incorporated into a layered double hydroxide phase and about half was adsorbed to the soil matrix. These changes in Zn speciation did not lead to a reduction of the Zn contents in the shoots and roots of barley and pea grown in the aged soil as compared with the freshly contaminated soil.

Copper↗

PubMed2007

Vertical distribution and speciation of trace metals in weathering flotation residues of a zinc/lead sulfide mine.

Sulfide-bearing mine tailings are a serious environmental problem around the world. In this study, the vertical distribution and speciation of Zn and Pb in the fine-grained flotation residues of a former sulfide ore mine in Germany were investigated to assess the inorganic weathering processes that effect the environmental risk arising from this site. Total metal contents were determined by X-ray fluorescence spectroscopy (XRF). Mobilizable fractions of Zn, Pb, Fe, and Mn were quantified by sequential chemical extractions (SCE). Furthermore, the speciation of Zn was analyzed by Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) to identify the residual Zn species. The variations in pH and inorganic C content show an acidification of the topsoil to pH 5.5. EXAFS results confirm that Zn is mainly bound in sphalerite in the subsoil and weathering reactions lead to a redistribution of Zn in the topsoil. A loss of 35% Zn and S from the topsoil compared with the parent material with 10 g kg-1 Zn and neutral pH has been observed. If acidification proceeds it will lead to a significant release of Zn, S, and Pb to the ground water. In contrast to Zn, Pb is enriched in the mobile fraction of the topsoil by more than a factor of two compared with the subsoil which contains a total of 2 g kg-1 Pb. Thus, the high bioavailability of Pb and the potential for Pb uptake by plants and animals currently represent the most severe threat for environmental health.

Hydrogen-Ion Concentration↗

PubMed2006

Iron isotope fractionation during proton-promoted, ligand-controlled, and reductive dissolution of Goethite.

Iron isotope fractionation during dissolution of goethite (alpha-FeOOH) was studied in laboratory batch experiments. Proton-promoted (HCl), ligand-controlled (oxalate dark), and reductive (oxalate light) dissolution mechanisms were compared in order to understand the behavior of iron isotopes during natural weathering reactions. Multicollector ICP-MS was used to measure iron isotope ratios of dissolved iron in solution. The influence of kinetic and equilibrium isotope fractionation during different time scales of dissolution was investigated. Proton-promoted dissolution did not cause iron isotope fractionation, concurrently demonstrating the isotopic homogeneity of the goethite substrate. In contrast, both ligand-controlled and reductive dissolution of goethite resulted in significant iron isotope fractionation. The kinetic isotope effect, which caused an enrichment of light isotopes in the early dissolved fractions, was modeled with an enrichment factor for the 57Fe/ 54Fe ratio of -2.6 per thousandth between reactive surface sites and solution. Later dissolved fractions of the ligand-controlled experiments exhibit a reverse trend with a depletion of light isotopes of approximately 0.5 per thousandth in solution. We interpret this as an equilibrium isotope effect between Fe(III)-oxalate complexes in solution and the goethite surface. In conclusion, different dissolution mechanisms cause diverse iron isotope fractionation effects and likely influence the iron isotope signature of natural soil and weathering environments.

Chemical Fractionation↗

PubMed2005

Chemical heterogeneity of organic soil colloids investigated by scanning transmission X-ray microscopy and C-1s NEXAFS microspectroscopy.

Colloid release and deposition in soils and sorption of inorganic and organic pollutants to soil colloids are strongly influenced by the composition and chemical heterogeneity of colloidal soil particles. To investigate the chemical heterogeneity of organic soil colloids at the particle scale, we used synchrotron scanning transmission X-ray microscopy (STXM) and C-1s near-edge X-ray absorption fine structure (NEXAFS) spectroscopy on 49 individual particles isolated from the surface horizons of three forest soils. Stacks of 130 images of each particle were collected at different X-ray energies between 280 and 310 eV. From these image arrays, NEXAFS spectra were obtained for each pixel and analyzed by principle component analysis and cluster analysis (PCA-CA) to characterize the intraparticle heterogeneity of the organic components. The results demonstrate that the organic matter associated with water-dispersible soil colloids is chemically heterogeneous at the single-particle scale. PCA-CA identified at least two distinct regions within single particles. However, the spectral variations between these regions were much smaller than the variations of averaged NEXAFS spectra representing different particles from the same soil horizon, implying that interparticle heterogeneity is much larger than intraparticle heterogeneity. Especially the contents of aromatic and carboxyl carbon exhibited a large variability. Overall, the NEXAFS spectra of water-dispersible soil colloids were similar to the NEXAFS spectrum of the humic acid fraction, but differed clearly from the fulvic acid and dissolved organic matter fractions extracted from the same soil horizon using conventional techniques.

Colloids↗

PubMed2005

Changes in zinc speciation in field soil after contamination with zinc oxide.

Recent studies on the speciation of Zn in contaminated soils confirmed the formation of Zn-layered double hydroxide (LDH) and Zn-phyllosilicate phases. However, no information on the kinetics of the formation of those phases under field conditions is currently available. In the present study, the transformation of Zn in a field soil artificially contaminated with ZnO containing filter dust from a brass foundry was monitored during 4 years using extended X-ray absorption fine structure (EXAFS) spectroscopy. Soil sections were studied by micro-X-ray fluorescence (micro-XRF) and micro-EXAFS spectroscopy. EXAFS spectra were analyzed by principal component analysis (PCA) and linear combination fitting (LCF). The results show that ZnO dissolved within 9 months and that half of the total Zn reprecipitated. The precipitate was mainly of the Zn-LDH type (>75%). Only a minor fraction (<25%) may be of Zn-phyllosilicate type. The remaining Zn was adsorbed to soil organic and inorganic particles. No significant changes in Zn speciation occurred from 9 to 47 months after the contamination. Thermodynamic calculations show that both Zn-LDH and Zn-phyllosilicate may form in the presence of ZnO but that the formation of Zn-phyllosilicate would be thermodynamically favored. Thus, the dominance of Zn-LDH found by spectroscopy suggests that the formation of the Zn precipitates was not solely controlled bythermodynamics but also contained a kinetic component. The rate-limiting step could be the supply of Al and Si from soil minerals to the Zn-rich solutions around dissolving ZnO grains.

Absorption↗

PubMed2005

Bacterial siderophores promote dissolution of UO2 under reducing conditions.

Tetravalent actinides are often considered environmentally immobile due to their strong hydrolysis and formation of sparingly soluble oxide phases. However, biogenic ligands commonly found in the soil environment may increase their solubility and mobility. We studied the adsorption and dissolution kinetics of UO2 in the presence of a microbial siderophore, desferrioxamine-B (DFO-B), under reducing conditions. Using batch and continuous flow stirred tank reactors (CFSTR),we found that DFO-B increases the solubility of UIV and accelerates UO2 dissolution rates through a ligand-promoted dissolution mechanism. DFO-B adsorption to UO2 followed a Langmuir-type isotherm. The maximum adsorbed DFO-B concentrations were 3.3 micromol m(-2) between pH 3 and 8 and declined above pH 8. DFO-B dissolved UO2 at a DFO-B surface-saturated net rate of 64 nmol h(-1) m(-2) (pH 7.5, l = 0.01 M) according to the first-order rate equation R = kL[Lads], with a rate coefficient kL of 0.019 h(-1). Even at very low siderophore concentrations (e.g. 1 microM), net dissolution rates (16 nmol h(-1) m(-2), pH 7.5, l = 0.01 M) were substantially greater than net proton-promoted dissolution rates (3 nmol h(-1) m(-2), pH 7-7.5, l = 0.01 M). Interestingly, adding dissolved FeIII had negligible effects on DFO-B-promoted UO2 dissolution rates, despite its potential as a competitor for DFO-B and as an oxidant of UIV. Our results suggest that strong organic ligands could influence the environmental mobility of tetravalent actinides and should be considered in predictions for nuclear waste storage and remediation strategies.

Adsorption↗

PubMed2005

Formation and dissolution of single and mixed Zn and Ni precipitates in soil: evidence from column experiments and extended X-ray absorption fine structure spectroscopy.

The stability and the formation and dissolution kinetics of mixed trace metal precipitates in soils are currently unknown. The objective of this study was to investigate slow sorption and release processes of Zn and Ni in a loamy soil using a combination of soil column experiments and extended X-ray absorption fine structure (EXAFS) spectroscopy. To investigate slow sorption processes, the soil material was packed into columns and leached with 5400 pore volumes of 10(-2) M CaCl2 solutions containing either ZnCl2 (5.2 x 10(-5) M) or NiCl2 (5.2 x 10(-5) M) or both ZnCl2 and NiCl2 (5.2 x 10(-5) M each). The Zn and Ni concentrations in the column effluents were monitored. The metal breakthrough curves showed that slow sorption processes lead to metal retention, whereby Zn was more strongly retained than Ni. In the experiment with both Zn and Ni present, amounts of Zn and Ni similar to those in the experiments with either Zn or Ni alone were retained. Analysis of soil samples by EXAFS spectroscopy showed that layered double hydroxide (LDH)-type precipitates had formed in all columns and that a mixed ZnNi-LDH had formed in the presence of both Zn and Ni. The dissolution of those precipitates under acidic conditions was assessed by subsequent leaching of the columns with a 10(-2) M CaCl2 solution at pH 3.0 (approximately 3000 pore volumes). When only Zn was present, 95% of the retained Zn was leached at pH 3. In contrast, only 23% of the retained Ni was leached in experiments with Ni alone. When Zn and Ni were present, 90% of the retained Zn and 87% of the retained Ni were released upon acidification. EXAFS analysis revealed that the LDH phases in the Zn experiment and the Zn-Ni experiment had been completely dissolved, while the LDH phase formed in the Ni experiment was still present. The higher resistance of Ni-LDH against dissolution at low pH could also be shown in dissolution studies with synthetic Zn-LDH, Ni-LDH, and ZnNi-LDH. Our results suggest that the individual rates at which Zn and Ni cations enter into the LDH structure determine the composition of the mixed ZnNi-LDH precipitate, and that the LDH composition determines the rate at which the LDH phase dissolves under acidic conditions.

Chemical Precipitation↗

PubMed2005

Effect of humic and fulvic acid concentrations and ionic strength on copper and lead binding.

We investigated the influence of humic and fulvic acid concentration (in the range of 1-1000 mg/L) on the binding of the two trace metals Cu(II) and Pb(II). The ability of the non-ideal competitive adsorption (NICA)-Donnan model to correctly predict Cu and Pb binding at low humic or fulvic acid concentration and lower ionic strength (0.01 M NaNO3), based on model parameters obtained from experiments conducted at high humic or fulvic acid concentrations (approximately 1000 mg/L) and higher ionic strength (0.1 M NaNO3), was tested. The binding of Cu and Pb to humic and fulvic acid in 0.01 M NaNO3 was determined over wide ranges in proton and metal ion activities using three different methods: ligand exchange-adsorptive differential pulse cathodic stripping voltammetry at low humic or fulvic acid concentrations (1-3 mg/L), differential pulse anodic stripping voltammetry at intermediate humic or fulvic acid concentrations (10-20 mg/L), and ion-selective electrodes at high humic or fulvic acid concentrations (approximately 1000 mg/L). The results demonstrate that binding isotherms for Cu and Pb can be measured at low humic or fulvic acid concentration using suitable voltammetric techniques. The binding isotherms for Cu and Pb to humic and fulvic acid obtained at constant pH values in the range of pH 4-8 are shown to be independent of humic and fulvic acid concentration. The NICA-Donnan model, calibrated for Cu and Pb binding using data measured at high humic and fulvic acid concentrations and an ionic strength of 0.1 M, accurately predicts Cu and Pb binding at low humic and fulvic acid concentrations and lower ionic strength (0.01 M). We conclude that NICA-Donnan parameters obtained by fitting experimental data measured with ion-selective electrodes at high humic or fulvic acid concentrations can be used for geochemical modeling of soils and aquatic environments with much lower concentrations of humic or fulvic acids.

Adsorption↗

PubMed2005

Spatial distribution and speciation of lead around corroding bullets in a shooting range soil studied by micro-X-ray fluorescence and absorption spectroscopy.

We investigated the spatial distribution and speciation of Pb in the weathering crust and soil surrounding corroding metallic Pb bullets in a shooting range soil. The soil had a neutral pH, loamy texture, and was highly contaminated with Pb, with total Pb concentrations in the surface soil up to 68 000 mg kg(-1). Undisturbed soil samples containing corroding bullets were collected and embedded in resin, and polished sections were prepared for micro-X-ray fluorescence (micro-XRF) elemental mapping and micro-X-ray absorption near edge structure (micro-XANES) spectroscopy. Bullet weathering crust material was separated from the metallic Pb cores and analyzed by powder X-ray diffraction analysis. Our results show a steep decrease in total Pb concentrations from the bullet weathering crust into the surrounding soil matrix. The weathering crust consisted of a mixture of litharge [alpha-PbO], hydrocerussite [Pb3(CO3)2-(OH)2], and cerussite [PbCO3], with litharge dominating near the metallic Pb core and cerussite dominating in the outer crust, which is in contact with the soil matrix. On the basis of these results and thermodynamic considerations, we propose that the transition of Pb species after oxidation of Pb(O) to Pb(II) follows the sequence litharge --> hydrocerussite --> cerussite. Consequently, the solubility of cerussite limits the activity of Pb2+ in the soil solution in contact with weathering bullets to < or =1.28 x 10(-6) at pH 7, assuming that the CO2 partial pressure (PCO2) in the soil is equal or larger than in the atmosphere (PCO2 > or = 0.000 35 atm).

Corrosion↗

PubMed2005

Sorption kinetics of strontium in porous hydrous ferric oxide aggregates I. The Donnan diffusion model.

Sorption of ions by hydrous ferric oxide (HFO) often shows a fast initial sorption reaction followed by a much slower sorption process. The second step is diffusion-controlled and can continue for days or months before equilibrium is reached. In this paper, we demonstrate that the diffusion rate may be explained by electrostatic interactions. The internal and external surfaces of HFO are generally positively charged and therefore repel cations. This can result in extremely low cation concentrations in pores, and therefore a significant reduction in pore diffusion rate. The theory is demonstrated here for sorption of Sr(2+) in HFO aggregates. The ion concentrations in the pore space are calculated using a Donnan model and diffusion is calculated from the Donnan concentration and potential gradients. This diffusion model is compared with nonelectrostatic pore diffusion, which does not take electrostatic interactions into account. The Donnan model predicts very low concentrations of Sr(2+) in the pores and diffusion rates that are up to 8000 times lower than predicted with a nonelectrostatic model.

Journal Article↗

PubMed2005

Sorption kinetics of strontium in porous hydrous ferric oxide aggregates II. Comparison of experimental results and model predictions.

In a previous paper, we introduced the Donnan diffusion model to describe cation diffusion into microporous solids with variably charged surfaces, such as hydrous ferric oxides (HFO). Here, we present experiments investigating slow diffusion and sorption of strontium by HFO aggregates with well-characterized porosity. Adsorption of protons and strontium at the HFO surface was evaluated by acid-base titration and batch adsorption experiments with dispersed HFO. The experimental data were fitted with a 1-pK basic Stern model including surface ion pair formation of Na(+) and NO(3)(-) and charge distribution for Sr surface complexes. Sorption-diffusion experiments were conducted in flow-through columns at controlled flow rates and at two different pH values, pH 4 and 7. Wet HFO aggregates, which were synthesized using a freezing and thawing method, were packed into chromatographic columns, pre-equilibrated to reach a constant pH, and then Sr breakthrough curves for adsorption and desorption of Sr were recorded. Strong retardation of Sr indicated that diffusion was sufficiently fast in a fraction of pores, so that sorption sites in these pores were rapidly accessible. Based on the analysis of NaNO(3) breakthrough curves, this rapidly accessible pore fraction was estimated to be 37% of the total aggregate pore volume at pH 4.0 and 72% at pH 7.0, respectively. Taking this into account, the Donnan diffusion model gave a good description of the experimental Sr breakthrough curves. Cation exclusion was correctly predicted at pH 4.0. At pH 7, the strong tailing of Sr breakthrough curves due to Sr diffusion into the smallest pores was very well simulated. The Donnan diffusion model proved adequate for pore sizes between approximately 2 and 5 nm, depending on pH and ionic strength. This category of pores was dominant in the HFO aggregates used in this work.

Journal Article↗

PubMed2005

Competitive sorption of protons and metal cations onto kaolinite: experiments and modeling.

Competitive sorption of protons, Cu, and Pb onto kaolinite (KGa-2) was investigated over wide concentration ranges and quantitatively described using three different models based on surface complexation and cation exchange reactions. In all models, two types of binding sites were assumed for kaolinite: edge sites (SOH0.5-) with pH-dependent charge and face sites (X-) with permanent negative charge. In a first step, proton sorption was measured by potentiometric acid-base titrations of kaolinite dispersed in 0.01, 0.03, and 0.1 M NaNO3 electrolyte solutions. The acid-base titration data were fitted to obtain site densities and protonation constants for the edge and face sites, respectively. In a second step, the sorption of Cu and Pb onto kaolinite was investigated at fixed pH values by metal titration using ion-selective electrodes for Cu2+ and Pb2+, respectively, and by independent batch sorption experiments. Our metal sorption data cover a range of pH 4-8 for Cu and pH 4-6 for Pb, three different ionic strengths (0.01, 0.03, and 0.1 M NaNO3), and up to eight orders of magnitude in free metal ion activity. An additional experiment was conducted to explore the sorption competition between Cu and Pb. In all three models, sorption of protons and metal cations to the edge sites of kaolinite was described with a 1-pK basic Stern (BS) approach. The three models differed only in the description of cation sorption to the face sites. In the first model (BS/GT), we used a Gaines-Thomas (GT) cation exchange equation for the face sites. This model yielded a satisfactory description of Cu sorption, but failed to describe Pb sorption isotherms at pH 4, 5, and 6. In the second model (BS/BS), we replaced the Gaines-Thomas equation by a basic Stern surface complexation formulation, thereby introducing electrostatic terms for sorption to face sites and allowing for free binding sites X-. This did not improve the fits of Cu or Pb sorption to kaolinite, however. In the third model (BS/BS(ext)), we extended the BS/BS-model by introducing additional monodentate sorption complexes at face sites (XCu+ and XPbNO3). This model described both Cu and Pb sorption very well over the entire range in metal concentrations and pH. It also correctly predicted the competitive effect of Pb on sorption of Cu. Model calculations with all three models suggested that Cu and Pb were sorbed mainly to face sites at low pH, while sorption to edge sites dominated at high pH values.

Absorption↗

PubMed2005

Aggregation kinetics of kaolinite-fulvic acid colloids as affected by the sorption of Cu and Pb.

Aggregation kinetics of kaolinite-fulvic acid colloids, as influenced by two strongly sorbing trace metal cations, Cu(II) and Pb(II), was investigated by time-resolved dynamic laser light scattering experiments. The effects of Cu and Pb on the aggregation rate and electrophoretic mobilitywere compared with that of Ca, another major divalent metal cation which is less strongly adsorbed. Kaolinite-fulvic acid suspensions (in 0.01 M NaNO3 at pH 4 and pH 6) were spiked with solutions containing Cu, Pb, or Ca to give total divalent cation concentrations between 10(-5) and 8 x 10(-3) M. The concentration of kaolinite was varied between 25 and 200 mg L(-1), while the concentration of fulvic acid ranged from 0.15 to 1.2 mg L(-1). The mass ratio of kaolinite to fulvic acid was kept constant at 500:3 in all experiments. Relative aggregation rates, expressed as attachment efficiency alpha, were determined from linear increases in average hydrodynamic radius with time during the first 5-8 min of the aggregation experiments, always starting with a well-dispersed suspension at time zero. The corresponding slope for fast aggregation (alpha = 1) was measured for pure kaolinite suspended in 0.01 M NaNO3 at pH 4. Addition of fulvic acid to the suspensions completely inhibited kaolinite aggregation at pH 4 and pH 6. Additions of Cu, Pb, and Ca resulted in strongly increased aggregation rates of the kaolinite-fulvic acid particles. The potential of the three cations to enhance aggregation of the kaolinite-fulvic acid colloids increased in the order Ca < Cu < or = Pb. At pH 4, the relationship between particle electrophoretic mobility and aggregation rate was the same for all three divalent metal cations. In the presence of Ca, an increase in pH from 4 to 6 resulted in decreased aggregation rates. However, in the presence of Cu or Pb, the opposite trend was observed and the relationship between electrophoretic mobility and aggregation rate was different than at pH 4. The effects of Cu, Pb, and Ca on the aggregation rates of kaolinite-fulvic acid colloids are explained by the different sorption behavior of the three divalent metal cations.

Adsorption↗

PubMed2004

Characterization of the pores in hydrous ferric oxide aggregates formed by freezing and thawing.

Hydrous ferric oxides (HFO) are efficient sorbents for inorganic and organic pollutants and therefore have great potentials in environmental science and engineering applications. Freezing and thawing of HFO suspensions leads to the formation of dense HFO aggregates. It facilitates the handling and increases the drying rate of HFO. In this study, we used a combination of pycnometry, gas adsorption (N(2) gas, water vapor), and small-angle neutron scattering (SANS) to characterize the porosity and pore size distribution of dense HFO aggregates formed by freezing dialyzed HFO suspensions at -25 degrees C and thawing them at room temperature. The crystallinity of the HFO, which was a 2-line ferrihydrite, was not affected by this treatment. Wet sieving and laser diffraction analysis showed that the dense HFO aggregates had a unimodal size distribution with an average diameter of 235+/-35 microm. Increasing the freezing rate by cooling with liquid N(2) (-196 degrees C) resulted in much smaller aggregates with an average diameter of 20 microm. Adding NaNO(3) electrolyte to the HFO suspensions prior to freezing also resulted in the formation of smaller aggregates. The dense HFO aggregates formed at -25 degrees C had a porosity of 0.73+/-0.02 ll(-1). SANS revealed a unimodal size distribution of pores, with an average pore diameter of 2.0 nm. The diameter of the HFO crystallites was estimated by transmission electron microscopy to be 1.9+/-0.5 nm. Geometrical considerations taking into account the unit particle and average pore size suggest that the crystallites retain 1-2 layers of hydration water during the coagulation induced by freezing. Analysis by N(2) gas adsorption showed that drying the dense HFO aggregates induced a reduction in porosity by about 25% and shifted the pore size distribution to smaller diameters. Rewetting during water vapor adsorption did not induce significant changes of the aggregate structure. The specific surface area of the dry HFO aggregates was between 320 and 380 m(2)g(-1).

Journal Article↗

PubMed2002

Combining selective sequential extractions, X-ray absorption spectroscopy, and principal component analysis for quantitative zinc speciation in soil.

Selective sequential extractions (SSE) and, more recently, X-ray absorption fine-structure IXAFS) spectroscopy have been used to characterize the speciation of metal contaminants in soils and sediments. However, both methods have specific limitations when multiple metal species coexist in soils and sediments. In this study, we tested a combined approach, in which XAFS spectra were collected after each of 6 SSE steps, and then analyzed by multishell fitting, principal component analysis (PCA) and linear combination fits (LCF), to determine the Zn speciation in a smelter-contaminated, strongly acidic soil. In the topsoil, Zn was predominately found in the smelter-emitted minerals franklinite (60%) and sphalerite (30%) and as aqueous or outer-sphere Zn2+ (10%). In the subsoil, aqueous or outer-sphere Zn2+ prevailed (55%), but 45% of Zn was incorporated by hydroxy-Al interlayers of phyllosilicates. Formation of such Zn-bearing hydroxy-interlayers, which has been observed here for the first time, may be an important mechanism to reduce the solubility of Zn in those soils, which are too acidic to retain Zn by formation of inner-sphere sorption complexes, layered double hydroxides or phyllosilicates. The stepwise removal of Zn fractions by SSE significantly improved the identification of species by XAFS and PCA and their subsequent quantification by LCF. While SSE alone provided excellent estimates of the amount of mobile Zn species, it failed to identify and quantify Zn associated with mineral phases because of nonspecific dissolution and the precipitation of Zn oxalate. The systematic combination of chemical extraction, spectroscopy, and advanced statistical analysis allowed us to identify and quantify both mobile and recalcitrant species with high reliability and precision.

Adsorption↗

PubMed2002

Slow formation and dissolution of Zn precipitates in soil: a combined column-transport and XAFS study.

Recent spectroscopic studies have demonstrated the formation of layered double hydroxides (LDH) and phyllosilicates upon sorption of Zn2+, Ni2+, and Co2+ to clay minerals and aluminum oxides at neutral to alkaline pH and at relatively high initial metal concentrations (>1 mM). The intention of the present study was to investigate whether such phases also form in soil under slightly acidic conditions and at lower metal concentrations. Columns packed with a loamy soil were percolated with aqueous solutions containing 0.1 or 0.2 mM Zn, Ni, Co, and Cd in a 10 mM CaCl2 background at pH 6.5. Metal breakthrough curves indicated a rapid initial sorption step, resulting in retarded breakthrough fronts, followed by further slow metal retention during the entire loading period of 42 days (7000 pore volumes). Total metal sorption and the contribution of slow sorption processes decreased in the order Zn > Ni > Co > Cd. Leaching the reacted soil with 10 mM CaCl2 at pH 6.5 remobilized 8% of the total retained Zn, 15% of Ni, 21% of Co, and 77% of Cd. Subsequent leaching with acidified influent (pH 3.0) remobilized most of the remaining metals. X-ray absorption fine-structure (XAFS) spectroscopy revealed that slow Zn sorption was due to the formation of a Zn-Al LDH precipitate. Although Ni, Co, and Cd concentrations were too low for XAFS analysis, their leaching patterns suggest that part of Ni and Co were also incorporated in solid phases, while most sorbed Cd was still present as exchangeable sorption complex after 42 days. A small but significant percentage of the sorbed metals (2-5%) remained in the soil, even after leaching with more than 3000 pore volumes at pH 3.0, which may suggest micropore diffusion or incorporation into more stable mineral phases.

Adsorption↗

PubMedDate not supplied

Size distribution of organic matter and associated propiconazole in agricultural runoff material.

Sorption and desorption characteristics of propiconazole (1-[[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl]-1H-1,2,4-triazole) to different particle/aggregate-size fractions of agricultural runoff material were investigated. Emphasis was put on clay and colloidal size fractions to evaluate their role as potential sorbents and carriers for this pesticide. The runoff material was separated into size fractions ranging from 2 mm to ca. 15 nm by wet sieving, sedimentation, centrifugation, and membrane ultrafiltration. Each fraction was characterized by its organic C content and C/N ratio. Distinctive sorption properties of clay-sized particles and colloids were investigated. The obtained size fractions differed significantly in their organic C concentration, C/N ratio, and sorption properties to propiconazole. Organic matter was mainly associated in aggregates >2 microm. Binding of propiconazole to this coarse fraction made up 80% of the sorbed propiconazole. The distribution coefficient between solid and aqueous phases increased with decreasing particle size. The colloidal fraction (<0.16 microm) exhibited the highest sorbtivity, with a distribution coefficient of 113 L kg(-1), which was more than four times higher than that in the bulk sample (27 L kg(-1)). The fraction <2 microm represented 8% of the total sample weight, but contributed to 20% of the sorbed propiconazole. Strong hysteresis was observed for the sorption-desorption of propiconazole on the runoff material. Under dilution very little sorbed propiconazole will be released into the water phase. Due to its high sorbtivity and mobility and the strong sorption-desorption hysteresis, particles in the fraction <2 microm can be important carriers of propiconazole in runoff suspensions with high sediment load.

Adsorption↗

PubMedDate not supplied

Heavy metal release from contaminated soils: comparison of column leaching and batch extraction results.

Heavy metals in soils may adversely affect environmental quality. In this study, we investigated the release of Zn, Cd, Pb, and Cu from four contaminated soils by column leaching and single and sequential batch extractions. Homogeneously packed soil columns were leached with 67 mL/g 10(-2) M CaCl2 to investigate the exchangeable metal pool and subsequently with 1400 mL/g 10(-2) M CaCl2 adjusted to pH 3 to study the potential of metal release in response to soil acidification. In two noncalcareous soils (pH 5.7 and 5.1), exchange by Ca resulted in pronounced release peaks for Zn and Cd that were coupled to the exchange of Mg by Ca, and 40 to 70% of total Zn and Cd contents were rapidly mobilized. These amounts compared well with exchangeable pools determined in single and sequential batch extractions. In two soils with near-neutral pH, the effluent concentrations of Zn and Cd were several orders of magnitude lower and no pronounced elution peaks were observed. This behavior was also observed for Cu and Pb in all four soils. When the soils were leached at pH 3, the column effluent patterns reflected the coupling of CaCO3 dissolution (if present) and other proton buffering reactions, proton-induced metal release, and metal-specific readsorption within the soil column. Varying the flow rate by a factor of five had only minor effects on the release patterns. Overall, Ca exchange and subsequent acidification to pH 3 removed between 65 and 90% of total Zn, Cd, Pb, and Cu from the four contaminated soils.

Biological Availability↗