Biomedical subjects

Ruhua Zhang

Publications and source records attributed to Ruhua Zhang.

6 recordsLinked to original sources

PubMed2004

Study on the bioavailability of nateglinide-hydroxypropyl-beta-cyclodextrin complex capsule in rabbits by liquid chromatographic-tandem mass spectrometry.

To evaluate the bioavailability of nateglinide-hydroxypropyl-beta-cyclodextrin (HPCD) complex, a rapid and specific liquid chromatographic-tandem mass spectrometric method was developed and validated to determine nateglinide in rabbit serum. The analyte was extracted from serum samples by liquid-liquid extraction, separated on a Zorbax C(18) column and detected by tandem mass spectrometry with an atmospheric pressure chemical ionization interface. Daidzein was used as the internal standard. The method has a lower limit of quantitation of 0.25 mg/L using 200 micro L serum. The intra- and inter-day relative standard deviations calculated from quality control (QC) samples were below 4%. The inter-day relative error was within 1%. Nateglinide serum concentrations in rabbits given nateglinide-hydroxypropyl-beta-cyclodextrin complex were much higher than those given the free drug. Significant difference was observed in main pharmacokinetic parameters of t(max) and C(max) but not AUC(0-t) between the complex and free drug. It was concluded that the absorption rate of nateglinide-HPCD complex was enhanced, compared with that of nateglinide free drug.

2-Hydroxypropyl-beta-cyclodextrin↗

PubMed2003

Determination of 3-n-butylphthalide in rabbit plasma by HPLC with fluorescence detection and its application in pharmacokinetic study.

A rapid, sensitive and specific reversed-phase high-performance liquid chromatographic method was developed for the determination of 3-n-butylphthalide, a drug currently being developed for treatment of stroke, in rabbit plasma. Fluorescence detection at an excitation wavelength of 280 nm and an emission wavelength of 304 nm was used for quantification of 3-n-butylphthalide. Ibuprofen was used as internal standard. Plasma samples were extracted with diethyl ether under acidic conditions. After evaporation of the organic phase, the extract was dissolved in mobile phase and injected into the chromatograph with C(18) column and a mobile phase of 0.05 mol/L sodium acetate buffer (pH 4.5)-acetonitrile (400:600). The peak area ratio vs concentration in plasma was linear over the range of 0.0212-4.24 microg/mL (correlation coefficient r = 0.9984) and the limit of quantification was 0.0212 microg/mL. Mean recovery was determined as 101.0% by analysis of plasma standard samples containing 0.0424, 0.424, 2.12 and 4.24 microg/mL of 3-n-butylphthalide. The intra-day relative standard deviations (RSDs) ranged from 3.6 to 8.9% and inter-day RSDs were within 8.0%. Pharmacokinetics of a single intravenous dose of 3-n-butylphthalide to the rabbits was presented to illustrate the applicability of this method. 3-n-Butylphthalide exhibited linear pharmacokinetics after intravenous administration to rabbits over the dose range 1-10 mg/kg.

Aldehydes↗

PubMed2003

Evaluation of monolithic osmotic tablet system for nifedipine delivery in vitro and in vivo.

The aim of this study was to evaluate the monolithic osmotic tablet system (MOTS) containing a solid dispersion with the practically water-insoluble drug nifedipine in vitro and in vivo. In the drug release study in vitro, the release profiles of this system had almost zero-order kinetics. The influences of tablet formulation variables, sizes of the delivery orifice, membrane variables, and values of pH in the dissolution medium on nifedipine release from MOTS have been investigated. The results provided evidence that the tablet core played an important role in MOTS. While orifice sizes and membrane variables affected the nifedipine release rate, MOTS was independent of the dissolution medium. The appropriate orifice size was found to be in the range of 0.5-1.0 mm. The coating membrane incorporating hydrophilic polyethylene glycol (PEG) formed a porous structure. The human pharmacokinetics and relative bioavailability of MOTS containing nifedipine were compared with a commercial Adalat osmotic tablet system containing an equivalent dose of nifedipine following an oral single dose of 30 mg given to each of 11 healthy volunteers in an open, randomized crossover study in vivo. The relative bioavailability for MOTS was 112%. There was no statistically significant difference in the pharmacokinetic parameters between two dosage forms. It is concluded that the monolithic osmotic tablet controlled release system is feasible for a long-acting preparation as a once-daily treatment.

Adult↗

PubMed2002

Determination of lipophilicity of two quinolone antibacterials, ciprofloxacin and grepafloxacin, in the protonation equilibrium.

The objective of this study was to compare protonation equilibrium and lipophilicity of two quinolone antibacterials, grepafloxacin (GPFX) and ciprofloxacin (CPFX), in order to give an insight into effects on the physicochemical properties by slight structural motifs. The protonation equilibrium was investigated by a spectrophotometry. Macro- and micro-dissociation constants were simultaneously determined, based on nonlinear regression analysis using the MULTI program, and then microspecies distribution could be described accordingly. Zwitterionic microspecies predominated at isoelectrical point (pI) for both drugs, and the concentration ratio of neutral to zwitterionic forms was near 4-fold greater for GPFX than that for CPFX. The apparent partition coefficient (D(O/B,pH)) versus pH profiles had the shape of a parabolic curve in an n-octanol/buffer system, and reached the maximum around pI for both, respectively. Moreover, two introduced methyl groups in GPFX increased not only intrinsic lipophilicity but also neutral microspecies fraction relative to CPFX, and D(O/B,pH) of GPFX was consequently far higher than that of CPFX. The results emphasized that there were significant differences in protonation equilibrium and lipophilicity between GPFX and CPFX, which conduced to explaining their different behavior in terms of antibacterial activities and pharmacokinetics.

Anti-Infective Agents↗

PubMed2002

Cyclodextrin complex osmotic tablet for glipizide delivery.

Poorly soluble glipizide was selected as the model drug to prepare osmotic pump tablets (OPT) with proper accessorial material after it was made an inclusion complex by kneading method in order to increase solubility. Polyethylene glycol 4000 (PEG4000) and cellulose acetate (CA) were selected as the coating materials, and acetone-water (95:5) co-solvent was employed as the coating medium. The effects of the osmotic promoting agent, diameter of the drug-releasing orifice, coating composition, and coat weight on the drug release profile were investigated. The drug release profile of the optimal formulation was compared with a commercialized push-pull osmotic tablet. The results indicated that glipizide-cyclodextrin inclusion complex OPT had excellent zero-order release characteristics in vitro.

Calorimetry, Differential Scanning↗

PubMed2002

Preparation of the traditional Chinese medicine compound recipe heart-protecting musk pH-dependent gradient-release pellets.

In this study a sustained-release formulation of traditional Chinese medicine compound recipe (TCMCR) was developed by selecting heart-protecting musk pills (HPMP) as the model drug. Heart-protecting musk pellets were prepared with the refined medicinal materials contained in the recipe of HPMP. Two kinds of coated pellets were prepared by using pH-dependent methacrylic acid as film-forming material, which could dissolve under different pH values in accordance with the physiological range of human gastrointestinal tract (GIT). The pellets coated with Eudragit L30D-55, which dissolves at pH value over 5.5, were designed to disintegrate and release drug in the duodenum. The pellets coated with Eudragit L100-Eudragit S100 combinations in the ratio of 1:5, which dissolve at pH value 6.8 or above, were designed to disintegrate and release drug in the jejunum to ileum. The pellets coated with HPMC, which dissolves in water at any pH value, were designed to disintegrate and release drug in the stomach. Finally, the heart-protecting musk sustained-release capsules (HPMSRC) with a pH-dependent gradient-release pattern were prepared by encapsulating the above three kinds of coated pellets at a certain ratio in hard gelatin capsule. The results of dissolution of borneol (one of the active compounds of the TCMCR) in vitro demonstrated that the coating load and the pH value of the dissolution medium had little effect on the release rate of borneol from pellets coated with hydroxypropyl methyl cellulose (HPMC), but had a significant effect on the release rate of borneol from pellets coated with Eudragit L30D-55 or Eudragit L100-Eudragit S100 combinations in the ratio of 1:5. The pellets coated with Eudragit L30D-55 at 30% (w/w) coating load or above had little drug release in 0.1 mol/L HCl for 3 hr and started to release drug at pH value over 5.5. The pellets coated with Eudragit L100-Eudragit S100 combinations in the ratio of 1:5 at 36% (w/w) coating load or higher had little drug release in 0.1 mol/L HCl for 3 hr and in phosphate buffer of pH value 6.6 for 2 hr, and started to release drug at pH value 6.8 or above. The release profiles of lipophilic bornoel and hydrophilic total ginsenoside from HPMSRC, consisting of three kinds of pellets respectively coated at a certain ratio with HPMC, Eudragit L30D-55, and Eudragit L100-Eudragit S100 in the ratio of 1:5, showed a characteristic of pH-dependent gradient release under the simulated gastrointestinal pH conditions and no significant difference between them. The results indicated that various components with extremely different physicochemical properties in the pH-dependent gradient-release delivery system of TCMCR could release synchronously while sustained-releasing. This complies with the organic whole concept of compound compatibility of TCMCR.

Chemistry, Pharmaceutical↗