Runkai Li | PubMed Health

PubMed2006

Capillary electrophoresis absorption detection using fiber-loop ring-down spectroscopy.

The application of phase-shift, fiber-loop, ring-down spectroscopy (PS-FLRDS) as an on-line detector for capillary electrophoresis (CE) of biomolecules is demonstrated. CE was conducted using a custom-designed capillary/fiber interface coupled to an absorption detector, which is based on the ring-down of an optical signal in a closed fiber waveguide loop. The ring-down times were obtained by measuring the phase difference between intensity modulated light entering and exiting the fiber loop. The incorporation of a microlens to enhance transmission through the sample gap led to an improvement of the sensitivity by up to 80% compared to the square-cut fiber and a reduction in the detection limit. The performance of the PS-FLRDS absorption technique as an online detector was characterized by flow injection through a capillary. Good repeatability and linear response were obtained, and the detection limit using the lensed fiber/capillary interface system was determined to be alpha(min) = 1.6 cm(-1) for an absorption path of approximately 30 microm. PS-FLRDS coupled to CE was also applied to the analysis of human serum albumin (HSA) by using a NIR dye as a noncovalent label. The excess free dye and the dye/protein complex were resolved. The labeling coefficient was determined to be approximately 6, and good repeatability of peak areas (RSD = 8.7%) was obtained for the analysis of HSA. Furthermore, an excellent linear response (R2 > 0.99) was obtained between the peak areas and concentrations of HSA. The detection limit of labeled HSA was determined to be 1.67 microM.

Electrophoresis, Capillary↗

PubMed2004

Phase-shift fiber-loop ring-down spectroscopy.

Fiber-loop ring-down spectroscopy (FLRDS) is a recently developed absorption spectroscopic technique suitable for very small liquid samples. It is based on measurements of the optical decay constant of laser intensity in a loop made of optical waveguide material. This decay constant changes as small liquid samples containing absorbing species are introduced into the loop. In this report, it is demonstrated that one can also obtain the optical decay constant using a continuous wave laser beam that is intensity modulated and then coupled into an optical fiber loop. The inherent exponential decay in the fiber loop introduces a phase shift of the light emitted from the loop with respect to the pumping beam. By measuring this phase shift, one can readily determine the concentration of the analyte introduced between the two fiber ends and a model is established to describe the relationship. It is demonstrated that this technique, dubbed phase-shift fiber-loop ring-down spectroscopy (PS-FLRDS), is well suited as an absorption detector for any flow system in which the optical absorption path is limited by the instrument architecture. By measuring the phase angle as a function of concentration of 1,1'-diethyl-4,4'-dicarbocyanine iodide in dimethyl sulfoxide, the detection limit was determined as approximately 6 microM for a 30-40-microm absorption path. A temporal resolution of approximately 100 ms was demonstrated by a rapid displacement of the solutions between the two fiber ends. Proof-of-principle use of the PS-FLRDS detection in capillary flow systems using a commercial four-way microcross established that the alignment of the fiber and the capillary can be made simple and effective, while retaining both a low detection limit and a fast response.

Journal Article↗