Biomedical subjects

Ruxandra Gref

Publications and source records attributed to Ruxandra Gref.

11 recordsLinked to original sources

PubMed2006

Influence of polysaccharide coating on the interactions of nanoparticles with biological systems.

Since dextran (DEX) grafted with poly(epsilon-caprolacton) (PCL) side chains (PCL-DEX) copolymers could form nanoparticles with a well defined core-shell structure, we investigated the ability of the DEX coating to modify the interactions with the biological media. We first studied the influence of the DEX coating on the phagocytosis of the nanoparticles by human TPH-1 and J774 murine macrophage-like cell lines. Then, the activation of the complement system (CH50 measurement) at the surface of the particles and the adsorption of plasma proteins (2D-PAGE) were investigated, too. It was found that the modification of the surface with DEX significantly reduced the cytotoxicity towards J774 macrophages: the IC50 was increased from 10 to 600 microg/ml. However, the DEX coating could activate complement, probably due to a loop-like conformation of DEX similar to that of cross-linked DEX in Sephadex (a strong complement activator). In addition, depending on whether the DEX loops were large or compact, preferential adsorption, apolipoproteins or immunoglobulins, was observed.

Adsorption↗

PubMed2005

Nanoencapsulation of a crystalline drug.

The aim of this work was to assess the influence of various formulation parameters on the incorporation of a poorly water-soluble crystalline drug into nanoparticles. For this purpose, the influence of the polymer (polylactic acid, polysebacic acid terminated with lithocholic acid, and polysebacic acid-co-lithocholic acid) as well as the effect of the dispersion medium (aqueous phases at different temperatures, saline medium and ethanol) on the encapsulation was investigated. 3H-labelled drug was used in order to determine the loading efficiency by liquid scintillation counting. The solubility of the drug in the various polymer materials was assessed by differential scanning calorimetry (DSC). The solubility of the drug in the different dispersion media was then determined by gas chromatographic-mass spectrometric measurements. The highest loading ratios were obtained using poly (lactic acid) (PLA). However, the drug solubility in the polymers, determined by DSC analysis, cannot be considered as predictive for encapsulation efficiency. The study of the influence of the liquid outer phase showed that the encapsulation efficiency increased when the drug solubility in the dispersion medium (before acetone evaporation) decreased. These experiments made it possible to propose a mechanism to account for the leakage of the crystalline drug during the nanoprecipitation process. So, when acetone is eliminated by evaporation, the drug solubility in the dispersion medium decreases, leading to the formation of crystals. During nanoparticles storage, the crystals continue to grow, the nanoparticles serving as drug reservoirs. These findings highlight the importance of using a polymer with a specific affinity for the drug, and a dispersion medium with the lowest drug solubility to achieve an efficient encapsulation of a crystalline drug.

Calorimetry, Differential Scanning↗

PubMed2004

Polysaccharide-decorated nanoparticles.

Surface modified colloidal carriers such as nanoparticles are able to modulate the biodistribution of the loaded drug when given intravenously, but also to control the absorption of drugs administered by other routes. This review presents the different strategies to coat the surface of polymeric as well as inorganic nanoparticles with polysaccharides. Various physicochemical and biological methods have been described to demonstrate such surface modification. The medical applications, mainly in imaging cancer, of polysaccharide-coated nanoparticles are presented, including their abilities to increase the blood circulation time and to target specific tumoral tissues. It has been shown that these coatings allow also to improve drug absorption via nasal or ocular pathways, due the mucoadhesive and/or permeability enhancer properties of the polysaccharides. Finally, the ability of polysaccharide-coated nanoparticles to deliver DNA or oligonucleotides will be discussed.

Animals↗

PubMed2004

Pure antiestrogen RU 58668-loaded nanospheres: morphology, cell activity and toxicity studies.

Nanospheres (NS) formulated using biodegradable and biocompatible polymers, poly(D,L-lactide-co-glycolide) (PLGA), poly(D,L-lactide) (PLA) and poly(epsilon-caprolactone) (PCL), loaded with the pure anti-estrogen RU 58668 (RU), a promising estrogen-dependent anticancer agent, have been prepared. They all possess a small size compatible with an intratumoral extravasation behavior and their pegylation reduce significantly their zeta potential. Characterization by freeze fracture electron microscopy have shown that NS are spheric particles with a size ranging between 30 and 50nm and a tendency to agglomerate which is reduced by polyethylene glycol (PEG) grafting. PEG-grafted NS are all non-toxic as revealed by cell viability assay. A specific cellular model has been used to evaluate not only the release extent of the drug but also its biological activity. All formulations tested showed that they release slowly RU as measured by the delayed ability of RU to inhibit estrogen-induced transcription in human breast cancer cells and that they possess only a small amount of surface adsorbed RU.

Antineoplastic Agents, Hormonal↗

PubMed2004

Molecular reactivity of busulfan through its experimental electrostatic properties in the solid state.

PURPOSE: In the route of developing novel liquid phase formulations based on the encapsulation of busulfan into liposomes in nontoxic solvents, drug crystallization inevitably occurs. In order to better understand the reactivity of busulfan, the characterization of its molecular properties was therefore considered as a key point. Also, preliminary attempts to prevent crystallization using cyclodextrins were explored. METHODS: An accurate single-crystal high-resolution X-ray diffraction experiment at 100 K has been carried out. The experimental electron density of busulfan was refined using a multipole model. Busulfan/beta-cyclodextrin coprecipitates were analyzed by powder X-ray diffraction and 1H-NMR spectroscopy. RESULTS: The electrostatic properties of busulfan and the methylsulfonate fragment dipole moment (3.2 D) were determined. The polar moieties play a key role in the crystallization of busulfan, which presents a nucleophilic region surrounding the sulfonate part, whereas the carbon chain displays an electrophilic character. This highlights the subtle busulfan/beta-cyclodextrin association. CONCLUSIONS: Busulfan electrostatic properties were used to quantify its chemical reactivity. This explains the difficulty to formulate busulfan into liposomes due to a strong polar character of the methylsulfonate terminal groups. The complexation with cyclodextrins deserves to be further investigated to allow the formulation of busulfan in nontoxic solvents.

Busulfan↗

PubMed2003

In vitro and in vivo biologic evaluation of long-circulating biodegradable drug carriers loaded with the pure antiestrogen RU 58668.

We have developed a parenteral delivery system for the administration of the highly promising pure antiestrogen RU 58668 (RU). Two types of nanoparticles (NP) made of biodegradable copolymers and coated with polyethylene-glycol (PEG) chains were prepared: nanospheres (NS) (diameter, approximately 110 nm) and nanocapsules (NC) with an oily core (diameter, approximately 250 nm). The amount of RU incorporated into NS and NC was approximately 33 vs. approximately 5 microg RU/mg of polymer, respectively. Coating with PEG chains prolonged the antiestrogenic potency of RU, as shown by a prolonged antiuterotrophic activity of encapsulated RU into PEG-poly(D,L lactic acid) (PLA) NS, as compared to that of conventional nonpegylated NS. In mice bearing MCF-7 estrogen-dependent tumors, free RU injected at 4.3 mg/kg/week by i.v. route slightly decreased the estradiol-promoted (0.5 mg/kg/week) tumor growth while RU-loaded PEG-PLA NS injected at the same dose strongly reduced it. Analysis of cell cycle parameters in tumors treated with RU indicated that RU-loaded PEG-PLA NS injected at 4.3 mg/kg/week in MCF-7 tumors decreased cyclin D(1) and cyclin E simultaneously, and increased p27. The antitumoral activity of RU encapsulated within pegylated NC was stronger than that of RU entrapped with pegylated NS loaded at an equivalent dose. Indeed, the former decreased the tumor size in nude mice transplanted with the estrogen receptor-positive but estrogen-independent MCF-7/Ras breast cancer cells at a concentration 2.5 times lower than that of the latter (0.4 mg/kg/week compared to 1 mg/kg/week). Empty PEG-PLA NS and NC were devoid of antiuterotrophic and antitumoral activities. Altogether, these results suggest that the incorporation of the pure antiestrogen RU into long-circulating NP could represent a novel antiestrogen drug delivery system for the parenteral route.

Animals↗

PubMed2003

Study of emulsion stabilization by graft copolymers using the optical analyzer Turbiscan.

Oil-in-water nanoemulsions were prepared using a series of synthetic graft copolymers with a backbone of dextran (DEX) and a number of side chains of poly-epsilon-caprolactone (PCL). In this paper, we focus on the o/w emulsion stabilizing abilities of these novel PCL-DEX copolymers, using a recently developed optical analyzer (Turbiscan). The main advantage of Turbiscan is to detect the destabilization phenomena in non-diluted emulsion, much earlier than the naked eye's operator, especially in the case of an opaque and concentrated system. This study shows that PCL-DEX copolymers successfully stabilized ethyl acetate-in-water emulsions, even in the absence of additional surfactants, whereas they were not efficient in stabilizing methylene chloride-in-water emulsions which coalesced fast and irreversibly. The ethyl acetate-in-water emulsion stabilizing ability of PCL-DEX seemed to be related to the localization of their blocks with regard to the oil-water interface.

Acetates↗

PubMed2003

Surface-engineered nanoparticles for multiple ligand coupling.

The design of surface-engineered nanoparticles for targeting to specific sites is a major challenge. To our knowledge, no study in the literature deals with ligand functionalization of biodegradable nanoparticles through biotin-avidin interactions. With the aim of conceiving small-sized nanoparticles which can be easily functionalized with a variety of ligands or mixtures thereof, biotinylated and PEGylated biotin-poly(ethylene glycol)-poly(epsilon-caprolactone) (B-PEG-PCL) copolymers were synthesized and used to prepare nanoparticles of around 100 nm. Avidin, followed by biotinylated wheat germ agglutinin as a model lectin, were coupled to their surface by taking advantage of the strong biotin-avidin complex formation. The cytotoxicity of the nanospheres towards Caco-2 cells in culture was negligible (more than 82% cell survival for nanoparticle concentrations up to 300 microg/well). The amount of radiolabeled poly(lactic acid) (PLA) or PEG-PLA nanoparticles associated with Caco-2 cells was only 0.7% and 1.5% of the amount added, respectively. This value was increased to 8.5% when a sufficient amount of lectin was bound to the PEG-PLA copolymer. After further studies, the biotin-PEG-coated nanoparticles could be helpful tools for studying the interaction between cells and functionalized nanoparticles with various surface characteristics (PEG layer density and thickness, ligand type and density).

Binding Sites↗

PubMed2003

The effect of a PEG versus a chitosan coating on the interaction of drug colloidal carriers with the ocular mucosa.

The influence of the surface characteristics of colloidal drug carriers in their interaction with different biological surfaces is becoming increasingly evident. In order to investigate the importance of these characteristics in their interaction with the ocular mucosa, we developed three types of nanocapsules that differ in their surface properties: poly- epsilon -caprolactone (PECL) nanocapsules, chitosan (CS)-coated PECL nanocapsules and poly(ethylene glycol) (PEG)-coated PECL nanocapsules. Two different approaches were used to form these polymer coated nanocapsules: (i) the electrostatic anchorage of the coating onto the PECL nanocapsules-in the case of CS-and (ii) the use of the previously synthesized copolymer PECL-PEG for the formation of the nanocapsules. In both cases, the systems, prepared by the interfacial deposition technique, were loaded with a fluorescent dye (rhodamine) in order to quantify and visualize their interaction with the ocular surface ex vivo and in vivo. An important conclusion from the ex vivo studies is that the developed systems, and specially the CS-coated ones, enhanced the penetration of the encapsulated dye through the cornea. This effect was not simple due to the physical presence of the nanocapsules but to their ability to carry the encapsulated compound. The second conclusion from the confocal laser scanning microscopy (CLSM) studies is that the systems were able to enter the corneal epithelium by a transcellular pathway and that the penetration rate was dependent on the coating composition. The images suggest that the PEG coating accelerates the transport of the nanocapsules across the whole epithelium, whereas the CS coating favours the retention of the nanocapsules in the superficial layers of the epithelium. The specific behaviour of CS-coated systems was also corroborated in vivo. These results indicate that the surface composition of colloidal drug carriers affects their biodistribution in the eye. Therefore, this surface modification approach can be used as a targeting strategy in ocular drug delivery.

Animals↗

PubMed2003

Polyester-poly(ethylene glycol) nanoparticles loaded with the pure antiestrogen RU 58668: physicochemical and opsonization properties.

PURPOSE: The pure antiestrogen RU58668 (RU) was encapsulated within nanospheres (NS) and nanocapsules (NC) prepared from different polyester copolymers with poly(ethylene glycol) (PEG) chains. The influence of their physicochemical properties on drug release in vitro and their susceptibility to opsonization were evaluated. METHODS: RU-loaded PEG-bearing nanoparticles (NP) prepared by interfacial deposition of preformed polymer were characterized (size, zeta potential, percentage encapsulation and loading). In vitro release kinetics were studied in the presence of 10% fetal calf serum (FCS). Their opsonization in mouse serum was evaluated by silver staining of SDS-PAGE and Western blotting of desorbed proteins. RESULTS: The NS were smaller than NC and had a zeta potential close to zero and a higher percentage of loading. RU release from NS in vitro was reduced as compared with the dissolution profile of free RU in a serum-containing medium. Decreased opsonin adsorption at the surface of pegylated NS was observed. CONCLUSION: Small nanoparticulate systems containing a high load of pure antiestrogen, showing reduced drug release, have been developed. Among the six nanosphere preparations containing RU, two show a size below 200 nm, and two others undergo reduced protein adsorption in the presence of serum, compatible with increased persistence in the blood.

Animals↗

PubMed2003

Novel polyester-polysaccharide nanoparticles.

PURPOSE: The aim of the present study was to develop a new type of core-shell nanoparticles from a family of novel amphiphilic copolymers, based on dextran (DEX) grafted with poly(epsilon-caprolactone) (PCL) side chains (PCL-DEX). METHODS: A family of PCL-DEX copolymers was synthesized in which both the molecular weight and the proportion by weight of DEX in the copolymer were varied. The nanoparticles were prepared by a technique derived from emulsion-solvent evaporation, during which emulsion stability was investigated using a Turbiscan. The nanoparticle size distribution, density, zeta potential, morphology, and suitability for freeze-drying were determined. RESULTS: Because of their strongly amphiphilic properties, the PCL-DEX copolymers were able to stabilize o/w emulsions without the need of additional surfactants. Nanoparticles with a controlled mean diameter ranging from 100 to 250 nm were successfully prepared. A mechanism of formation of these nanoparticles was proposed. Zeta potential measurements confirmed the presence of a DEX coating. CONCLUSION: A new generation of polysaccharide-decorated nanoparticles has been successfully prepared from a family of PCL-DEX amphiphilic copolymers. They may have potential applications in drug encapsulation and targeting.

Chemistry, Pharmaceutical↗