PubMed Health⌕ Search

Biomedical subjects

Ryohei Ishii

Publications and source records attributed to Ryohei Ishii.

11 recordsLinked to original sources

Crystallization and preliminary X-ray crystallographic analysis of the catalytic domain of pyrrolysyl-tRNA synthetase from the methanogenic archaeon Methanosarcina mazei.

Pyrrolysyl-tRNA synthetase (PylRS) from Methanosarcina mazei was overexpressed in an N-terminally truncated form PylRS(c270) in Escherichia coli, purified to homogeneity and crystallized by the hanging-drop vapour-diffusion method using polyethylene glycol as a precipitant. The native PylRS(c270) crystals in complex with an ATP analogue belonged to space group P6(4), with unit-cell parameters a = b = 104.88, c = 70.43 A, alpha = beta = 90, gamma = 120 degrees , and diffracted to 1.9 A resolution. The asymmetric unit contains one molecule of PylRS(c270). Selenomethionine-substituted protein crystals were prepared in order to solve the structure by the MAD phasing method.

Amino Acyl-tRNA Synthetases↗

Identification by Mn2+ rescue of two residues essential for the proton transfer of tRNase Z catalysis.

Thermotoga maritima tRNase Z cleaves pre-tRNAs containing the 74CCA76 sequence precisely after the A76 residue to create the mature 3' termini. Its crystal structure has revealed a four-layer alphabeta/betaalpha sandwich fold that is typically found in the metallo-beta-lactamase superfamily. The well-conserved six histidine and two aspartate residues together with metal ions are assumed to form the tRNase Z catalytic center. Here, we examined tRNase Z variants containing single amino acid substitutions in the catalytic center for pre-tRNA cleavage. Cleavage by each variant in the presence of Mg2+ was hardly detected, although it is bound to pre-tRNA. Surprisingly, however, Mn2+ ions restored the lost Mg2+-dependent activity with two exceptions of the Asp52Ala and His222Ala substitutions, which abolished the activity almost completely. These results provide a piece of evidence that Asp-52 and His-222 directly contribute the proton transfer for the catalysis.

Amino Acid Sequence↗

Substrate recognition ability differs among various prokaryotic tRNase Zs.

There exists a significant difference in pre-tRNA preference among prokaryotic tRNase Zs. This is an enigma, because pre-tRNAs should form the common L-shaped structure and tRNase Zs should form the common structure based on the alphabeta/betaalpha-fold. To address this issue, we examined six different eubacterial and archaeal tRNase Zs including two newly isolated tRNase Zs for cleavage of 18 different pre-tRNA substrates. Two Thermotoga maritima, one Thermus thermophilus, one Bacillus subtilis, one Thermoplasma acidophilum, and one Pyrobaculum aerophilum enzymes were tested. To our surprise, the newly isolated proteins T. maritima and T. thermophilus showed the weak tRNase Z activity, even though their primary amino acid sequences are, on the whole, quite different from those of the typical tRNase Zs. We confirmed that substrate recognition ability is quite different among those tRNase Zs. In addition, we found that the optimal conditions as a whole differ significantly among the enzymes. From these results, we provided several clues to solve the enigma by showing the potential importance of the 74th-76th nucleotide sequence of pre-tRNA, the flexible arm length of tRNase Z, the divalent metal ion species, and the histidine corresponding His222 in T. maritima tRNase Z.

Amino Acid Sequence↗

Crystal structure of the tRNA 3' processing endoribonuclease tRNase Z from Thermotoga maritima.

The maturation of the tRNA 3' end is catalyzed by a tRNA 3' processing endoribonuclease named tRNase Z (RNase Z or 3'-tRNase) in eukaryotes, Archaea, and some bacteria. The tRNase Z generally cuts the 3' extra sequence from the precursor tRNA after the discriminator nucleotide. In contrast, Thermotoga maritima tRNase Z cleaves the precursor tRNA precisely after the CCA sequence. In this study, we determined the crystal structure of T. maritima tRNase Z at 2.6-A resolution. The tRNase Z has a four-layer alphabeta/betaalpha sandwich fold, which is classified as a metallo-beta-lactamase fold, and forms a dimer. The active site is located at one edge of the beta-sandwich and is composed of conserved motifs. Based on the structure, we constructed a docking model with the tRNAs that suggests how tRNase Z may recognize the substrate tRNAs.

Amino Acid Sequence↗

Crystal structure of tRNA adenosine deaminase (TadA) from Aquifex aeolicus.

The bacterial tRNA adenosine deaminase (TadA) generates inosine by deaminating the adenosine residue at the wobble position of tRNA(Arg-2). This modification is essential for the decoding system. In this study, we determined the crystal structure of Aquifex aeolicus TadA at a 1.8-A resolution. This is the first structure of a deaminase acting on tRNA. A. aeolicus TadA has an alpha/beta/alpha three-layered fold and forms a homodimer. The A. aeolicus TadA dimeric structure is completely different from the tetrameric structure of yeast CDD1, which deaminates mRNA and cytidine, but is similar to the dimeric structure of yeast cytosine deaminase. However, in the A. aeolicus TadA structure, the shapes of the C-terminal helix and the regions between the beta4 and beta5 strands are quite distinct from those of yeast cytosine deaminase and a large cavity is produced. This cavity contains many conserved amino acid residues that are likely to be involved in either catalysis or tRNA binding. We made a docking model of TadA with the tRNA anticodon stem loop.

Adenosine Deaminase↗

Roles of conserved amino acid sequence motifs in the SpoU (TrmH) RNA methyltransferase family.

Transfer RNA (Gm18) methyltransferase (TrmH (SpoU)) catalyzes the transfer of a methyl group from S-adenosyl-l-methionine (AdoMet) to the 2'-OH of guanosine 18 in tRNA. This enzyme is a member of the SpoU family of RNA methyltransferases. Recent computational researches have shown that three amino acid sequence motifs are conserved among the SpoU members. Recently, we determined the crystal structures of the apoand AdoMet bound forms of TrmH (Nureki, O., Watanabe, K., Fukai, S., Ishii, R., Endo, Y., Hori, H., and Yokoyama, S. (2004) Structure 12, 593-602). Furthermore, we clarified the AdoMet binding site and proposed the catalytic mechanism. Since the functions of the conserved amino acid residues in the motifs remain unknown, here we have prepared 17 mutants of TrmH and carried out various biochemical studies, including determination of the kinetic parameters for both AdoMet and tRNA, S-adenosyl-l-homocysteine affinity chromatography, gel mobility shift assay, CD spectroscopy, and analytical gel filtration. Our results show that Asn(35), Arg(41), Glu(124), and Asn(152) are involved in binding tRNA and that the Asn(35) residue is involved in the release of S-adenosyl-l-homocysteine. Several residues of TrmH are important for stability of the enzyme. Taken together, our biochemical studies reinforce the previously proposed catalytic mechanism. We also discuss amino acid substitutions in general within the SPOUT superfamily of methyltransferases.

Amino Acid Motifs↗

A short peptide insertion crucial for angiostatic activity of human tryptophanyl-tRNA synthetase.

Human tryptophanyl-tRNA synthetase (TrpRS) is secreted into the extracellular region of vascular endothelial cells. The splice variant form (mini TrpRS) functions in vascular endothelial cell apoptosis as an angiostatic cytokine. In contrast, the closely related human tyrosyl-tRNA synthetase (TyrRS) functions as an angiogenic cytokine in its truncated form (mini TyrRS). Here, we determined the crystal structure of human mini TrpRS at a resolution of 2.3 A and compared the structure with those of prokaryotic TrpRS and human mini TyrRS. Deletion of the tRNA anticodon-binding (TAB) domain insertion, consisting of eight residues in the human TrpRS, abolished the enzyme's apoptotic activity for endothelial cells, whereas its translational catalysis and cell-binding activities remained unchanged. Thus, we have identified the inserted peptide motif that activates the angiostatic signaling.

Apoptosis↗

Deep knot structure for construction of active site and cofactor binding site of tRNA modification enzyme.

The tRNA(Gm18) methyltransferase (TrmH) catalyzes the 2'-O methylation of guanosine 18 (Gua18) of tRNA. We solved the crystal structure of Thermus thermophilus TrmH complexed with S-adenosyl-L-methionine at 1.85 A resolution. The catalytic domain contains a deep trefoil knot, which mutational analyses revealed to be crucial for the formation of the catalytic site and the cofactor binding pocket. The tRNA dihydrouridine(D)-arm can be docked onto the dimeric TrmH, so that the tRNA D-stem is clamped by the N- and C-terminal helices from one subunit while the Gua18 is modified by the other subunit. Arg41 from the other subunit enters the catalytic site and forms a hydrogen bond with a bound sulfate ion, an RNA main chain phosphate analog, thus activating its nucleophilic state. Based on Gua18 modeling onto the active site, we propose that once Gua18 binds, the phosphate group activates Arg41, which then deprotonates the 2'-OH group for methylation.

Amino Acid Sequence↗

Divergent evolutions of trinucleotide polymerization revealed by an archaeal CCA-adding enzyme structure.

CCA-adding enzyme [ATP(CTP):tRNA nucleotidyltransferase], a template-independent RNA polymerase, adds the defined 'cytidine-cytidine-adenosine' sequence onto the 3' end of tRNA. The archaeal CCA-adding enzyme (class I) and eubacterial/eukaryotic CCA-adding enzyme (class II) show little amino acid sequence homology, but catalyze the same reaction in a defined fashion. Here, we present the crystal structures of the class I archaeal CCA-adding enzyme from Archaeoglobus fulgidus, and its complexes with CTP and ATP at 2.0, 2.0 and 2.7 A resolutions, respectively. The geometry of the catalytic carboxylates and the relative positions of CTP and ATP to a single catalytic site are well conserved in both classes of CCA-adding enzymes, whereas the overall architectures, except for the catalytic core, of the class I and class II CCA-adding enzymes are fundamentally different. Furthermore, the recognition mechanisms of substrate nucleotides and tRNA molecules are distinct between these two classes, suggesting that the catalytic domains of class I and class II enzymes share a common origin, and distinct substrate recognition domains have been appended to form the two presently divergent classes.

Adenosine Triphosphate↗

Crystal structure of the tRNA processing enzyme RNase PH from Aquifex aeolicus.

RNase PH is one of the exoribonucleases that catalyze the 3' end processing of tRNA in bacteria. RNase PH removes nucleotides following the CCA sequence of tRNA precursors by phosphorolysis and generates mature tRNAs with amino acid acceptor activity. In this study, we determined the crystal structure of Aquifex aeolicus RNase PH bound with a phosphate, a co-substrate, in the active site at 2.3-A resolution. RNase PH has the typical alpha/beta fold, which forms a hexameric ring structure as a trimer of dimers. This ring structure resembles that of the polynucleotide phosphorylase core domain homotrimer, another phosphorolytic exoribonuclease. Four amino acid residues, Arg-86, Gly-124, Thr-125, and Arg-126, of RNase PH are involved in the phosphate-binding site. Mutational analyses of these residues showed their importance in the phosphorolysis reaction. A docking model with the tRNA acceptor stem suggests how RNase PH accommodates substrate RNAs.

Amino Acid Sequence↗

Stereoselective ring-opening polymerization of racemic lactide using aluminum-achiral ligand complexes: exploration of a chain-end control mechanism.

Stereoselective polymerization of racemic lactide (rac-LA) was examined using Al-achiral ligand complexes. By introduction of substituents in aromatic rings of Schiff base ligands, a higher selectivity was obtained without any chiral auxiliaries in the catalyst via a chain-end control mechanism. The T(m) values (T(m) 170-192 degrees C) were comparable to or higher than that of homochiral polymer, poly(L-LA) (T(m) 162 degrees C), and a thermally more stable polylactide than poly(L-LA) was prepared from rac-LA.

Aluminum↗