Biomedical subjects
Publications and source records attributed to Ryong Ryoo.
A direct hydrothermal assembly process was developed to synthesize mesoporous aluminophosphates that are constructed with crystalline microporous frameworks, by the addition of organosilane surfactants into the conventional synthesis composition for crystalline microporous aluminophosphates.
Zeolites are a family of crystalline aluminosilicate materials widely used as shape-selective catalysts, ion exchange materials, and adsorbents for organic compounds. In the present work, zeolites were synthesized by adding a rationally designed amphiphilic organosilane surfactant to conventional alkaline zeolite synthesis mixtures. The zeolite products were characterized by a complementary combination of X-ray diffraction (XRD), nitrogen sorption, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The analyses show that the present method is suitable as a direct synthesis route to highly mesoporous zeolites. The mesopore diameters could be uniformly tailored, similar to ordered mesoporous silica with amorphous frameworks. The mesoporous zeolite exhibited a narrow, small-angle XRD peak, which is characteristic of the short-range correlation between mesopores, similar to disordered wormhole-like mesoporous materials. The XRD patterns and electron micrographs of the samples taken during crystallization clearly showed the evolution of the mesoporous structure concomitantly to the crystallization of zeolite frameworks. The synthesis of the crystalline aluminosilicate materials with tunable mesoporosity and strong acidity has potentially important technological implications for catalytic reactions of large molecules, whereas conventional mesoporous materials lack hydrothermal stability and acidity.
The pore shape and size of MCM-41 were studied analytically by comparing the observed powder X-ray diffraction intensities with that derived from the MCM-41 crystal structure models, with two different pore shapes, a hexagon and a circle. The powder diffraction patterns from the as-synthesized and the calcined MCM-41 were measured by a synchrotron radiation at SPring-8, Japan. The MCM-41 structure with circular and hexagonal pore shapes explains well for the as-synthesized and the calcined MCM-41 crystals, respectively. The pore size and boundary obtained by this approach agree with those obtained from an N2 gas adsorption measurement combined with the Fourier synthesized density map.
n-butanol has been chosen as an organic additive in the SiO(2)-EO(106)PO(70)EO(106)-H(2)O system at low HCl concentrations, for the generation of large-pore mesoporous silicas with easily tailored textural and structural properties. As opposed to previous reports on syntheses of cubic mesoporous silica that are usually performed in a very narrow composition range, we report now the possibility of preparing large-pore cagelike mesoporous silicas in a wide range of synthesis mixture compositions. Particularly, the cubic Imm silica with large interconnected cagelike pores (SBA-16) can easily be synthesized with controlled pore sizes and wall thicknesses, depending upon the synthesis mixture composition. The primary mesopore volume of the SBA-16 cages can be tuned from 0.27 to 0.56 cm(3) g(-)(1), and the mesopore size is shown to range from 4.7 to 7.2 nm, by performing a simple adjustment of the starting mixture composition. With the synthesis parameters varied, we describe the first complete diagram of the product phase domains obtained for silica mesophases in a SiO(2)-EO(106)PO(70)EO(106)-butanol-H(2)O system. Other ordered mesophases also observed in this system are the face-centered cubic Fmm silica mesophase and a 2D hexagonal-like mesostructure. Importantly here, the use of a low acid catalyst concentration regime allowed the preparation of silica mesophases in almost thermodynamically controlled conditions because of slow condensation kinetics of the inorganics. Such conditions enabled the introduction of n-butanol as the phase-controlling agent in the system, providing efficient tuning of the mesophase topology. The description of the phase domains provides a future basis for the design of large-pore mesoporous silicas with tailored textural and structural properties. Mesoporous samples obtained within the composition ranges of the phase domains are characterized by powder X-ray diffraction (PXRD) and nitrogen physisorption measurements.
Adsorption and structural properties of inverse carbon replicas of two ordered siliceous P6mm and Ia3d mesostructures have been studied by nitrogen adsorption, powder X-ray diffraction, and transmission electron microscopy. These carbon replicas were prepared by filling the pores of SBA-15 and KIT-6 siliceous templates with various carbon precursors followed by carbonization and silica dissolution. Sucrose, furfuryl alcohol, acenaphthene, mesophase pitch, and petroleum pitch were used to obtain inverse carbon replicas of SBA-15 and KIT-6. While structural properties of the resulting ordered mesoporous carbons are mainly determined by the hard template used, their adsorption properties depend on the type of the carbon precursor.
Assembly of mesostructured silica using Pluronic P123 triblock copolymer (EO(20)-PO(70)-EO(20)) and n-butanol mixture is a facile synthesis route to the MCM-48-like ordered large mesoporous silicas with the cubic Iad mesostructure. The cubic phase domain is remarkably extended by controlling the amounts of butanol and silica source correspondingly. The extended phase domain allows synthesis of the mesoporous silicas with various structural characteristics. Characterization by powder X-ray diffraction, nitrogen physisorption, scanning electron microscopy, and transmission electron microscopy reveals that the cubic Iad materials possess high specific surface areas, high pore volumes, and readily tunable pore diameters in narrow distribution of sizes ranging from 4 to 12 nm. Moreover, generation of complementary pores between the two chiral channels in the gyroid Iad structure can be controlled systematically depending on synthesis conditions. Carbon replicas, using sucrose as the carbon precursor, are obtained with either the same Iad structure or I4(1)/a (or lower symmetry), depending on the controlled synthesis conditions for silica. Thus, the present discovery of the extended phase domain leads to facile synthesis of the cubic Iad silica with precise structure control, offering vast prospects for future applications of large-pore silica materials with three-dimensional pore interconnectivity.
Free-radical polymerization inside mesoporous silica has been investigated in order to open a route to functional polymer-silica composite materials with well-defined mesoporosity. Various vinyl monomers, such as styrene, chloromethyl styrene, 2-hydroxyethyl methacrylate, and methacrylic acid, were polymerized after impregnation into mesoporous silicas with various structures, which were synthesized using polyalkylene oxide-type block copolymers. The location of the polymers was systematically controlled with detailed structures of the silica framework and the polymerization conditions. Particularly noteworthy is the polymer-silica composite structure obtained by in situ polymerization after the selective adsorption of monomers as a uniform film on silica walls. The analysis of XRD data and the N(2) adsorption isotherms indicates the formation of uniform polymer nanocoating. The resultant polymer-silica composite materials can easily be post-functionalized to incorporate diverse functional groups in high density, due to the open porous structure allowing facile access for the chemical reagent. The fundamental characteristics of the composite materials are substantiated by testing the biomolecule's adsorption capacity and catalytic reactivity. Depending on the structure and composition of polymers, the resultant polymer-silica composite materials exhibit notably distinct adsorption properties toward biomolecules, such as proteins. Furthermore, it is demonstrated that the nanocoatings of polymers deposited on the mesopore walls have remarkably enhanced catalytic activity and selectivity, as compared to that of bulk polymer resins. We believe that, due to facile functionalization and attractive textural properties, the mesoporous polymer-silica composite materials are very useful for applications, such as adsorption, separation, host-guest complexes, and catalysis.
The photodissociation dynamics of vinyl bromide and perfluorovinyl bromide have been investigated at 234 nm using a photofragment ion imaging technique coupled with a state-selective [2+1] resonance-enhanced multiphoton ionization scheme. The nascent Br atoms stem from the primary C-Br bond dissociation leading to the formation of C2H3(X) and Br(2Pj;j=1/2,3/2). The obtained translational energy distributions have been well fitted by a single Boltzmann and three Gaussian functions. Boltzmann component has not been observed in the perfluorovinyl bromide. The repulsive 3A'(n,sigma *) state has been considered as the origin of the highest Gaussian components. Middle translational energy components with Gaussian shapes are produced from the 1A"(pi,sigma*) and/or 3A"(pi,sigma*) which are very close in energy. Low-energy Gaussian components are produced via predissociation from the 3A'(pi,pi*) state. The assignments have also been supported by the recoil anisotropy corresponding to the individual components. It is suggested that intersystem crossing from the triplet states to the ground state has been attributed to the Boltzmann component and the fluorination reduces the probability of this electronic relaxation process.
Explore the source record for details and available documents.
Exceptional control of the phase behavior of highly ordered large pore mesostructured silica (with the choice of Fm3m, Im3m or p6mm symmetry) is achieved using a triblock copolymer (EO(106)PO(70)EO(106)) and butanol at low acid concentrations.
Explore the source record for details and available documents.
A new synthesis route to high-quality large mesoporous cubic Ia3d silica is reported, utilizing a triblock copolymer (EO20PO70EO20)-butanol mixture for the structure direction in aqueous solution.
Convenient and commercially viable synthesis conditions are described, providing efficient and reproducible control of pore connectivity and pore wall thickness for the synthesis of high quality SBA-15 mesoporous silica.
Explore the source record for details and available documents.
Nanostructured organic materials, particularly those constructed with uniform nanopores, have been sought for a long time in materials science. There have been many successful reports on the synthesis of nanostructured organic materials using the so-called, 'supramolecular liquid crystal templating' route. Ordered nanoporous polymeric materials can also be synthesized through a polymerization route using colloidal or mesoporous silica templates. The organic pore structures constructed by these approaches, however, are lower in mechanical strength and resistance to chemical treatments than nanoporous inorganic, silica and carbon materials. Moreover, the synthesis of the organic materials is yet of limited success in the variation of pore sizes and structures, whereas a rich variety of hexagonal and cubic structures is available with tunable pore diameters in the case of the inorganic materials. Here we describe a synthesis strategy towards ordered nanoporous organic polymers, using mesoporous carbon as the retaining framework. The polymer-carbon composite nanoporous materials exhibit the same chemical properties of the organic polymers, whereas the stability of the pores against mechanical compression, thermal and chemical treatments is greatly enhanced. The synthesis strategy can be extended to various compositions of hydrophilic and hydrophobic organic polymers, with various pore diameters, connectivity and shapes. The resultant materials exhibiting surface properties of the polymers, as well as the electric conductivity of the carbon framework, could provide new possibilities for advanced applications. Furthermore, the synthesis strategy can be extended to other inorganic supports such as mesoporous silicas.
A synthesis strategy for the systematic control of the pore wall thickness has been developed for the mesoporous silicas with 2-D hexagonal order using ionic and nonionic surfactant mixtures. The mesoporous silicas have been used as templates for the synthesis of 2-D hexagonally ordered mesoporous carbons with controlled pore diameters. The synthesis strategy and results are useful not only for tailoring the properties of the mesoporous materials but also for extending our insights into the synthesis mechanism.
Structures of Pt-nanowires, synthesized in channels of silica mesoporous materials MCM-41, SBA-15 and MCM-48, were investigated by transmission electron microscopy. One dimensional (1D) Pt-nanowires were formed inside the channels of the MCM-41, and were single crystals with a length of several tens to several hundreds nanometers and a diameter of ca. 3 nm pt-nanowires synthesized in SBA-15 formed a new 3D-network following 3D-pore geometry of SBA-15; that is, the main 1D-channels are interconnected to each other through randomly distributed tunnels. These Pt-nanowires showed a well single crystalline. MCM-48 has two non-intersecting chiral channels, and Pt-networks were mostly formed in one of the two channels. Therefore the networks were also chiral; however, the chirality of Pt-networks remained to be determined. It was shown that all Pt-nanowires were formed following the channel geometries of silica mesoporous materials used.