PubMed Health⌕ Search

Biomedical subjects

Ryusei Ito

Publications and source records attributed to Ryusei Ito.

3 recordsLinked to original sources

Dissolution characteristics of cylindrical particles and tablets.

In this paper, dissolution characteristics of primary-particles and compressed tablets were investigated by experiments using a mathematical model. For the primary-particle, it was found that the dissolution rate increased with a decrease in the particle size. Assuming that primary-particles of size distribution were of cylindrical shape and that the dissolution occurs from the total external surface, an extended Nernst-Noyes-Whitney equation fitted to the experimental data well. As the influences of particle size and shape on thickness of a diffusion-boundary film were found to be quite low, the dissolution rate was considered to be affected by the specific surface area dominantly. Furthermore, the same model was applied to a compressed tablet and fitted to the data well. Though the rate constant obtained were not affected by the properties of primary-particles forming the tablet, it was found to increase with the apparent voidage which occupies the inter-particle volume of tablet diluent among less soluble particles. Consequently, an increase in the apparent voidage is presumed to accelerate penetration of water into the internal voids of the tablet. Thus, the dissolution going, the effective surface area inside the tablet is considered to be extended.

Kinetics↗

Transformation and characterisation of dissolved organic matter during the thermophilic aerobic biodegradation of faeces.

We conducted a comparison of the characteristics of dissolved organic matter (DOM) taken from the bio-toilet and other sources. A characterisation of DOM was carried out to assess the stability of the compost generated during the thermophilic and aerobic biodegradation of faeces. In addition, levels of soluble microbial products generated in the bio-toilet composting reactor were compared with those taken from other sources. The results showed that (i) the main component of DOM from the bio-toilet are solutes with molecular weight (MW)>30,000 Da (40%), whereas micromolecules (MW< 1000 Da) constituted more than 60% of the DOM from other solid samples, while liquid samples reached even more than 90%; (ii) the DOM stabilisation level in the composting reactor of the bio-toilet system was greater than that shown by DOM from other sources; (iii) stabilisation of DOM in the bio-toilet system was characterised by an increasing amount of macromolecules (MW>30,000 Da) after a decreasing trend was observed in the early stages of the biodegradation process; and (iv) net production of lipopolysaccharide (LPS) in wastewater treatment plants is greater than in the bio-toilet.

Bacteria, Aerobic↗

Controlled release with coating layer of permeable particles.

An enhanced method was proposed for controlled release of core material using a coating layer of fine permeable particles dispersed in an impermeable wax prepared by dry-based process. A mathematical model was constructed to describe in detail the core material release by diffusion through the connected permeable particles inside the coating layer. The effective diffusivity was simulated by a random walk method taking into account the structure of the coating layer. The released characteristics were measured for the urea core particle coated with the layer of the starch permeable particles dispersed in the paraffin wax. The calculated results were in a good quantitative agreement with experimental data in all range of coating conditions. As a result, the low release rate was proven to be obtained with thicker coating layer of lower volume fraction of permeable particles. Moreover, the application of permeable particles instead of soluble ones [J. Chem. Eng. Jpn. 35 (2002) 40] resulted in significant decrease in release rate.

Algorithms↗