Biomedical subjects

S A Müller

Publications and source records attributed to S A Müller.

34 records · Page 2Linked to original sources

PubMed2000

Structural analysis of F18 fimbriae expressed by porcine toxigenic Escherichia coli.

The F18 fimbriae expressed by porcine toxigenic Escherichia coli strains are 1- to 2-mm-long filaments that mediate the adhesion of the bacteria to enterocytes. The backbone of these fimbriae is built from a major structural 15.1-kDa protein, FedA. The structure of isolated negatively stained F18 fimbriae imaged by dark-field scanning transmission electron microscopy (STEM) was resolved to approximately 2 nm. Analyzing their helical symmetry showed the axially repeating units to alternate in a "zigzag" manner around the helical axis with an axial rise of 2.2 nm. Two repeating units give rise to the observed 4.3-nm helical repeat, which is practically identical to the pitch of the one-start helix formed. Additionally, an axially repeating pattern with a 27-nm spacing was found on rotary-shadowed fimbriae. Mass-per-length determination of unstained F18 fimbriae by STEM revealed the axially repeating unit to have a molecular mass of 25.4 kDa, indicating that it is a FedA monomer, with the difference in mass arising from the minor subunits, FedE and FedF. The presence of the latter two proteins might cause the observed 27-nm axial pattern.

Animals↗

PubMed1999

Domain organization of Mac-2 binding protein and its oligomerization to linear and ring-like structures.

The multidomain Mac-2 binding protein (M2BP) is present in serum and in the extracellular matrix in the form of linear and ring-shaped oligomers, which interact with galectin-3, fibronectin, collagens, integrins and other large glycoproteins. Domain 1 of M2BP (M2BP-1) shows homology with the cysteine-rich SRCR domain of scavanger receptor. Domains 2 and 3 are related to the dimerization domains BTB/POZ and IVR of the Drosophila kelch protein. Recombinant M2BP, its N-terminal domain M2BP-1 and a fragment consisting of putative domains 2, 3 and 4 (M2BP-2,3,4) were investigated by scanning transmission electron microscopy, transmission electron microscopy, analytical ultracentrifugation and binding assays. The ring oligomers formed by the intact protein are comprised of approximately 14 nm long segments composed of two 92 kDa M2BP monomers. Although the rings vary in size, decamers predominate. The various linear oligomers also observed are probably ring precursors, dimers predominate. M2BP-1 exhibits a native fold, does not oligomerize and is inactive in cell attachment. M2BP-2,3,4 aggregates to heterogeneous, protein filled ring-like structures as shown by metal shadowed preparations. These aggregates retain the cell-adhesive potential indicating native folding. It is hypothesized that the rings provide an interaction pattern for multivalent interactions of M2BP with target molecules or complexes of ligands.

Amino Acid Sequence↗

PubMed1999

The reaction center complex from the green sulfur bacterium Chlorobium tepidum: a structural analysis by scanning transmission electron microscopy.

The three-dimensional (3D) structure of the reaction center (RC) complex isolated from the green sulfur bacterium Chlorobium tepidum was determined from projections of negatively stained preparations by angular reconstitution. The purified complex contained the PscA, PscC, PscB, PscD subunits and the Fenna-Matthews-Olson (FMO) protein. Its mass was found to be 454 kDa by scanning transmission electron microscopy (STEM), indicating the presence of two copies of the PscA subunit, one copy of the PscB and PscD subunits, three FMO proteins and at least one copy of the PscC subunit. An additional mass peak at 183 kDa suggested that FMO trimers copurify with the RC complexes. Images of negatively stained RC complexes were recorded by STEM and aligned and classified by multivariate statistical analysis. Averages of the major classes indicated that different morphologies of the elongated particles (length=19 nm, width=8 nm) resulted from a rotation around the long axis. The 3D map reconstructed from these projections allowed visualization of the RC complex associated with one FMO trimer. A second FMO trimer could be correspondingly accommodated to yield a symmetric complex, a structure observed in a small number of side views and proposed to be the intact form of the RC complex.

Bacterial Proteins↗

PubMed1999

Novel molecular architecture of the multimeric archaeal PEP-synthase homologue (MAPS) from Staphylothermus marinus.

The phosphoenolpyruvate (PEP)-synthases belong to the family of structurally and functionally related PEP-utilizing enzymes. The only archaeal member of this family characterized thus far is the Multimeric Archaeal PEP-Synthase homologue from Staphylothermus marinus (MAPS). This protein complex differs from the bacterial and eukaryotic representatives characterized to date in its homomultimeric, as opposed to dimeric or tetrameric, structure. We have probed the molecular architecture of MAPS using limited proteolytic digestion in conjunction with electron microscopic, biochemical, and biophysical techniques. The 2.2 MDa particle was found to be organized in a concentric fashion. The 93.7 kDa monomers possess a pronounced tripartite domain structure and are arranged such that the N-terminal domains form an outer shell, the intermediate domains form an inner shell, and the C-terminal domains form a core structure responsible for the assembly into a multimeric complex. The core domain was shown to be capable of assembling into the native multimer by recombinant expression in Escherichia coli. Deletion mutants as well as a synthetic peptide were investigated for their state of oligomerization using native polyacrylamide gel electrophoresis, molecular sieve chromatography, analytical ultracentrifugation, circular dichroism (CD) spectroscopy, and chemical cross-linking. Our data confirmed the existence of a short C-terminal, alpha-helical oligomerization motif that had been suggested by multiple sequence alignments and secondary structure predictions. We propose that this motif bundles the monomers into six groups of four. An additional formation of 12 dimers between globular domains from different bundles leads to the multimeric assembly. According to our model, each of the six bundles of globular domains is positioned at the corners of an imaginary octahedron, and the helical C-terminal segments are oriented towards the centre of the particle. The edges of the octahedron represent the dimeric contacts. Phylogenetic analysis suggests that the ancient predecessor of this family of enzymes contained the C-terminal oligomerization motif as a feature that was preserved in some hyperthermophiles.

Amino Acid Sequence↗

PubMed1999

Surface structures of native bacteriorhodopsin depend on the molecular packing arrangement in the membrane.

Bacteriorhodopsin is the one of the best-studied models of an ion pump. Five atomic models are now available, yet their comparison reveals differences of some loops connecting the seven transmembrane alpha-helices. In an attempt to resolve this enigma, topographs were recorded in aqueous solution with the atomic force microscope (AFM) to reveal the most native surface structure of bacteriorhodopsin molecules in the purple membrane. Individual peptide loops were observed with a lateral resolution of between 4.5 A and 5.8 A, and a vertical resolution of about 1 A. The AFM images demonstrate for the first time, that the shape, the position, and the flexibility of individual polypeptide loops depend on the packing arrangement of bacteriorhodopsin molecules in the lipid bilayer.

Bacteriorhodopsins↗

PubMed1999

Electrostatically balanced subnanometer imaging of biological specimens by atomic force microscope.

To achieve high-resolution topographs of native biological macromolecules in aqueous solution with the atomic force microscope (AFM) interactions between AFM tip and sample need to be considered. Short-range forces produce the submolecular information of high-resolution topographs. In contrast, no significant high-resolution information is provided by the long-range electrostatic double-layer force. However, this force can be adjusted by pH and electrolytes to distribute the force applied to the AFM tip over a large sample area. As demonstrated on fragile biological samples, adjustment of the electrolyte solution results in a local reduction of both vertical and lateral forces between the AFM tip and proteinous substructures. Under such electrostatically balanced conditions, the deformation of the native protein is minimized and the sample surface can be reproducibly contoured at a lateral resolution of 0.6 nm.

Bacterial Proteins↗

PubMed1998

Late events in the assembly of 20S proteasomes.

Electron microscopy and STEM mass measurements have been used to characterize late intermediates in the assembly pathway of wildtype and mutant Rhodococcus proteasomes. A proteolytically inactive and processing-incompetent mutant, betaK33A, allowed a short-lived late intermediate of the pathway to be captured, the preholoproteasome. In this fully assembled 20S complex the 14 propeptides with an aggregate mass of 100 kDa fill the whole central cavity and most of the two antechambers. It is further shown that in wildtype Rhodococcus proteasomes the propeptides are degraded in a processive manner undergoing multiple cleavages before the products are discharged and the inner cavities are cleared. It appears that the docking of two half-proteasomes, i.e., preholoproteasome formation, is sufficient to trigger autocleavage of the Gly-1/Thr1 bond necessary for active site formation and the subsequent degradation of the propeptides.

Amino Acid Substitution↗

PubMed1998

A revised model for the oligomeric state of the N-ethylmaleimide-sensitive fusion protein, NSF.

The N-ethylmaleimide-sensitive fusion protein (NSF) is an ATPase that plays an essential role in intracellular membrane trafficking. Previous reports have concluded that NSF forms either a tetramer or a trimer in solution, and that assembly of the oligomer is essential for efficient activity in membrane transport reactions. However, in recent electron microscopic analyses NSF appears as a hexagonal cylinder similar in size to related ATPases known to be hexamers. We have therefore reevaluated NSF's oligomeric state using a variety of quantitative biophysical techniques. Sedimentation equilibrium and sedimentation velocity analytical ultracentrifugation, transmission electron microscopy with rotational image analysis, scanning transmission electron microscopy, and multiangle light scattering all demonstrate that, in the presence of nucleotide, NSF is predominantly a hexamer. Sedimentation equilibrium results further suggest that the NSF hexamer is held together by oligomerization of its D2 domains. The sedimentation coefficient, s20,w0, of 13.4 (+/-0. 1) S indicates that NSF has unusual hydrodynamic characteristics that cannot be solely explained by its shape. The demonstration that NSF is a hexameric oligomer highlights structural similarities between it and several related ATPases which act by switching the conformational states of their protein substrates in order to activate them for subsequent reactions.

Adenosine Triphosphatases↗

PubMed1998

Reconstitution, characterisation and mass analysis of the pentacylindrical allophycocyanin core complex from the cyanobacterium Anabaena sp. PCC 7120.

The phycobilisome (PBS) of Anabaena sp. PCC 7120 was allowed to dissociate into its constituents and the resulting allophycocyanin (AP) fraction was purified. Its reconstitution yielded a complex which according to negative stain electron microscopy and spectral analysis was identical to the native pentacylindrical PBS core domain. Each cylinder of the central tricylindric unit was comprised of four AP (alphabeta)3 disks. Mass analysis using the scanning transmission electron microscope (STEM) showed the presence of 16 AP trimers in the intact reconstitute, which had a total mass of 1966(+/-66) kDa. Composition analysis indicated an AP trimer distribution of (AP-II):(AP-LCM):(AP-B):(AP-I)=6:2:2:6, i.e. an addition of two AP-I and two AP-II complexes compared to a tricylindrical PBS core domain. Therefore, we suggest that each supplementary half-core cylinder found in pentacylindrical AP core domains is comprised of one AP-I and one AP-II trimer, in agreement with the current model. The structural significance of the 127 kDa core membrane linker polypeptide was further investigated by subjecting the AP core reconstitute to mild chymotryptic degradation. After isolation, the digested complex exhibited a tricylindrical appearance while STEM mass analysis confirmed the presence of only 12 AP complexes. Polypeptide analysis by SDS-PAGE and Edman degradation related the half-cylinder loss to cleavage of the Rep4 domain of the core membrane linker polypeptide. On the basis of these data, a general model for the assembly of the three hemidiscoidal PBS types known to date is discussed.

Amino Acid Sequence↗

PubMed1998

Characterization of ARC, a divergent member of the AAA ATPase family from Rhodococcus erythropolis.

A gene encoding a AAA ATPase was discovered in the 5' region of the second operon of 20 S proteasome subunits in the nocardioform actinomycete Rhodococcus erythropolis NI86/21. The gene was cloned and expressed in Escherichia coli. The protein, ARC (AAA ATPase forming Ring-shaped Complexes), is a divergent member of the AAA family. The deduced product of the arc gene is 591 residues long (66 kDa). The purified protein possesses a low, N-ethylmaleimide-sensitive ATPase activity and forms rings of six subunits, arranged symmetrically around a central opening or cavity. Two-dimensional crystals grown on lipid monolayers yielded images of the ATPase molecules in "end-on" orientation at 1.9 nm resolution.

Amino Acid Sequence↗

PubMed1998

Evaluating atomic models of F-actin with an undecagold-tagged phalloidin derivative.

We have prepared an undecagold-tagged phalloidin derivative to determine this mushroom toxin's binding site and orientation within the F-actin filament by scanning transmission electron microscopy (STEM) and 3-D helical reconstruction. Remarkably, when stoichiometrically bound to F-actin, the undecagold moiety of the derivative could be directly visualized by STEM along the two half-staggered long-pitch helical strands of single filaments. Most importantly, the structural data obtained when combined with various biochemical constraints enabled us to critically evaluate two distinct atomic models of the F-actin filament (i.e. the Holmes-Lorenz versus the Schutt-Lindberg model). Taken together, our data are in excellent agreement with the Holmes-Lorenz model.

Actins↗

PubMed1998

Interaction of monomeric and dimeric kinesin with microtubules.

The binding stoichiometry of kinesin to microtubules was determined using several biochemical and biophysical approaches (chemical crosslinking, binding assays, scanning transmission electron microscopy (STEM), image reconstruction, and X-ray scattering). The results show that each tubulin dimer associates with one kinesin head, irrespective of whether kinesin occurs in a monomeric or dimeric form in solution. Moreover, these heads appear to align along the protofilament axis generating a 16 nm periodicity of successive kinesin dimers. This is consistent with a "tightrope" model of movement where the first head of the dimer provides a guiding signal for the following one.

Animals↗

PubMed1997

Mass determination, subunit organization and control of oligomerization states of keyhole limpet hemocyanin (KLH).

Analytical dark-field scanning transmission electron microscopy (STEM) of freeze-dried unstained specimens of keyhole limpet hemocyanin (KLH; from Megathura crenulata, a prosobranch gastropod) gave a molecular mass of 400 kDa for the subunit of KLH1 and of 345 kDa for the subunit of KLH2, which confirms our published values from SDS/PAGE. Within the 400-kDa KLH1 subunit we identified, by limited proteolysis, isolation of fragments and N-terminal sequencing, eight distinct 45-60 kDa functional domains (termed 1a through 1h) and determined their sequential arrangement. The KLH1 domains differ biochemically and immunologically from each other and from the previously characterized seven domains of KLH2 (termed 2a through 2g). Our partial amino acid sequences suggest that a domain, equivalent to the C-terminal domain 1h, is missing in KLH2. This deficiency is believed to be genuine and not an artifact of the subunit preparation procedure, since STEM measurements of the native didecamers yielded a mass difference of about 800 kDa between KLH1 and KLH2 (8.3 MDa versus 7.5 MDa), correlating with 20 copies of a functional 1h domain. It was also shown that the KLH1 didecamer can be rapidly split (minutes) into an almost homogeneous population of stable decamers by increasing the pH of the Tris/saline stabilizing buffer (routinely pH 7.4), which contains 5 mM CaCl2 and 5 mM MgCl2, to pH 8.5. Reformation of the didecamers occurred more slowly (days) upon dialysis against the pH 7.4 stabilizing buffer. Addition of 100 mM calcium and 100 mM magnesium ions to the pH 7.4 stabilizing buffer leads to the more rapid (overnight) formation of didecamers together with a significant number of previously unobserved KLH1 multidecamers, which could be structurally distinguished from the established multidecamers of KLH2.

Amino Acid Sequence↗

PubMed1997

Polymorphic fibrillar assembly of human amylin.

Human amylin forms fibrillar amyloid between pancreatic islet cells in patients with non-insulin-dependent (type 2) diabetes mellitus. Fibrillar assemblies also form in vitro in aqueous solutions of synthetic human amylin. We now report on the structural polymorphism of these fibrils. The thinnest fibril, referred to as the protofibril, has an apparent width of 5 nm but is only rarely observed by itself. These protofibrils spontaneously assemble into higher order fibrillar structures with distinct morphologies. Prominent among these is an 8-nm fibril with a distinct 25-nm axial crossover repeat which is formed by left-handed coiling of two 5-nm protofibrils. Coiling of more than two 5-nm protofibrils results in cable-like structures of variable width depending on the number of protofibrils involved. Lateral (side-by-side) assembly of 5-nm protofibrils is also observed and produces ribbons which may contain two, three, four, or more protofibrils and occasionally large single-layered sheets. The mass-per-length (MPL) of the 5-nm protofibril is 10 kDa/nm. This has been established in two ways: first, the 8-nm fibril, which is formed by coiling two 5-nm protofibrils around each other, has an MPL of 20 kDa/nm. Second, higher order fibrils differ by increments of 10 kDa/nm. Hence, about 2.6 human amylin molecules (3904 Da) are packed in 1 nm of protofibril length. Similarities exist between amylin fibrils and those formed from other amyloid proteins, suggesting that the in vitro assembly of synthetic protein may serve as a useful model system in advancing our understanding of amyloid formation in disease.

Amyloid↗

PubMed1997

The ATP-dependent HslVU protease from Escherichia coli is a four-ring structure resembling the proteasome.

HslVU is a new two-component protease in Escherichia coli composed of the proteasome-related peptidase HslIV and the ATPase HsIU. We have used electron microscopy and image analysis to examine the structural organization of HslV and HslU homo-oligomers and the active HslVU enzyme. Electron micrographs of HslV reveal ring-shaped particles, and averaging of top views reveal six-fold rotational symmetry, in contrast to other beta-type proteasome subunits, which form rings with seven-fold symmetry. Side views of HslV show two rings stacked together, thus, HslV behaves as dodecamer. The ATPase HslU forms ring-shaped particles in the presence of ATP, AMP-PNP or ADP, suggesting that nucleotide binding, but not hydrolysis, is required for oligomerization. Subunit crosslinking, STEM mass estimation, and analysis of HslU top views indicate that HslU exists both as hexameric and heptameric rings. With AMP-PNP present, maximal proteolytic activity is observed with a molar ratio of HslU to HslV subunits of 1:1, and negative staining electron microscopy shows that HslV and HsIU form cylindrical four-ring structures in which the HsIV dodecamer is flanked at each end by a HslU ring.

ATP-Dependent Proteases↗

PubMed1996

Structure and assembly properties of the intermediate filament protein vimentin: the role of its head, rod and tail domains.

We have investigated the functional role of the non-helical end domains of vimentin on its assembly properties using truncated Xenopus and human recombinant proteins. Removal of the amino-terminal "head" domain yielded a molecule that did not assemble into 10 nm filaments but remained in a soluble oligomeric particle form with a sedimentation coefficient considerably smaller than that of wild-type vimentin (Vim(wt)). In contrast, removal of the carboxy-terminal "tail" domain had no obvious effect on the sedimentation characteristics. In particular, sedimentation equilibrium analysis under low ionic strength conditions yielded oligomeric particle species of Mr 135,000 to 360,000, indistinguishable from those obtained with Vim(wt). When induced to form filaments from this state by rapid dilution into filament forming buffer, Vim(wt) and Vim(deltaT) protein generated similar viscosity profiles. However, as determined by scanning transmission electron microscopy, under these conditions Vim(deltaT) formed filaments of heterogeneous diameter, corresponding to various distinct mass-per-length (MPL) values: whereas Vim(wt) yielded MPL values peaking between 40 and 45 kDa/nm, Vim(deltaT) filaments produced histograms which could be fitted by three Gaussian curves peaking between 37 and 131 kDa/nm. In contrast, when dialyzed against, instead of being rapidly diluted into, filament forming buffer, Vim(deltaT) gave histograms with one major peak at about 54 kDa/nm. The MPL heterogeneity observed for Vim(deltaT) was already evident at the earliest stages of assembly. For example, ten seconds after initiation, "unit-length" filament segments (58 to 63 nm) were formed with both wt and deltaT proteins, but the diameters were considerably larger for Vim(deltaT) compared to Vim(wt) (20(+/- 3) nm versus 16(+/- 3)nm), indicating a distinct role of the carboxy-terminal tail domain in the width control during unit-length filament formation. Despite this difference both Vim(deltaT) and Vim(wt) filaments appeared to grow stepwise in a modular fashion from such unit-length filament segments. This suggests that assembly occurred by a principally similar mechanism involving the end-on-fusion or annealing of unit-length filaments.

Amino Acid Sequence↗