PubMed Health⌕ Search

Biomedical subjects

S A Ozkan

Publications and source records attributed to S A Ozkan.

At least 19 recordsLinked to original sources

Humoral immune response against 38-kDa and 16-kDa mycobacterial antigens in tuberculosis.

Several ELISA tests based on mycobacterial antigens have been used for the rapid diagnosis of tuberculosis (TB), although demonstration of Mycobacterium tuberculosis in a smear or culture is the most reliable method. In the present study, the diagnostic value of 16-kDa and 38-kDa mycobacterial antigens was investigated in patients who were diagnosed with tuberculosis by clinical and/or bacteriological findings in Turkey. The PATHOZYME-TB Complex Plus commercial ELISA kit was used for measuring immunoglobulin G against 38-kDa and 16-kDa recombinant antigens. Humoral immune response was analysed in a group of 179 TB patients (143 smear-positive, 19 smear-negative, eight lymphadenitis and nine pleuritis), 15 inactive TB cases and in control groups consisting of 40 healthy volunteers and 20 subjects with pulmonary diseases other than TB. The sensitivity, specifity, positive predictive value and negative predictive value of the test were determined at 52.5%, 93.3%, 95.9% and 39.7%, respectively in TB cases. Antibodies were detected at above cut-off level in three (20%) out of 15 subjects with inactive TB. In conclusion, the ELISA test has a very good specifity and an acceptable sensitivity and positive predictive value. It is thought that it could be used in combination with other methods to increase diagnostic accuracy, especially for culture-negative tuberculosis cases, which are difficult to diagnose.

Adolescent↗

Determination of the antihyperlipidemic simvastatin by various voltammetric techniques in tablets and serum samples.

The electrochemical behavior and determination of simvastatin (SMV), a lipid-lowering drug, were studied in aqueous alcohol medium at a stationary glassy carbon electrode. Cyclic voltammetry studies showed one main, well-defined, sharp oxidation peak between pH 2 and 8. The oxidation was irreversible and exhibited a diffusion controlled mechanism. Differential pulse and square wave voltammetric methods for the quantitative determination of SMV in pharmaceutical dosage forms and spiked serum samples were developed based on the linear relationship between the peak current and the concentration. Differential pulse and square wave voltammetric techniques for the determination of SMV in 0.1 M H2SO4 and a constant amount of methanol (20%), which allow quantitation over the 2 x 10(-6)-1 x 10(-4) M range in supporting electrolyte with a detection limit of 2.71 x 10(-7) M and 5.50 x 10(-7) M for differential pulse and square wave voltammetric methods, respectively, are proposed. The repeatability and reproducibility of the methods were determined. Precision and accuracy were also checked. These methods were used for the determination of SMV in tablets. The standard addition method was used in biological media. No electroactive interferences from endogenous substances and excipients were found in biological fluids and pharmaceutical dosage forms, respectively.

Algorithms↗

Electrochemical methods for determination of the protease inhibitor indinavir sulfate in pharmaceuticals and human serum.

Indinavir sulfate is an inhibitor of the human immunodeficiency virus (HIV) protease. The aim of this study was to determine indinavir levels in serum and pharmaceuticals, by means of electrochemical methods using the hanging mercury drop electrode (HMDE). Indinavir exhibited irreversible cathodic waves over the pH range 2.00-12.00 in different supporting electrolytes. The current-concentration plot was rectilinear over the range from 8 x 10(-7) M to 8 x 10(-6) M with a correlation coefficient of 0.996 for differential pulse voltammetry (DPV) and 8 x 10(-7) M to 1 x 10(-5) M with correlation of 0.999 M for osteryoung square ware voltammetry (OSWV) in Britton-Robinson buffer at pH 10.00. The wave was characterized as being irreversible and diffusion-controlled. The proposed methods were fully validated and successfully applied to the determination of indinavir in capsules and spiked human serum samples with good recoveries. The repeatability and reproducibility of the methods as well as precision and accuracy (such as supporting electrolyte, serum samples) were determined. No electroactive interferences from the endogenous substances were found in serum samples.

Capsules↗

Electroanalytical determination of donepezil HCl in tablets and human serum by differential pulse and osteryoung square wave voltammetry at a glassy carbon electrode.

Donepezil hydrochloride (DNP) is used for the treatment of mild to moderate dementia of the Alzheimer's type. The voltammetric behavior of DNP was studied at a glassy carbon electrode using cyclic, linear sweep, differential pulse (DPV) and square-wave (OSWV) voltammetric techniques. DNP exhibited irreversible anodic waves within the pH range 1.80 and 9.00 in different supporting electrolytes. The peak was characterized as being irreversible and diffusion-controlled. The possible mechanism of the oxidation process is discussed. The current-concentration plot was rectilinear over the range from 1 x 10(-6) to 1 x 10(-4) M in Britton-Robinson buffer at pH 7.0 with a correlation coefficient between 0.997 and 0.999 in supporting electrolyte and human serum samples using the DPV and SWV techniques. The repeatability and reproducibility of the methods for both media (supporting electrolyte and serum sample) were determined. Precision and accuracy of the developed methods were demonstrated by recovery studies. The standard addition method was used for the recovery studies. No electroactive interferences were found in biological fluids from endogenous substances or additives present in tablets. The methods developed were successfully applied to the determination of DNP in tablets and in spiked human serum.

Algorithms↗

Validated RP-hPLC method for the assay of zalcitabine in drug substance, formulated products and human serum.

A HPLC method for zalcitabine determination in bulk form, pharmaceutical dosage forms and human serum has been developed and validated. The proposed method was conducted using a reverse phase technique, and UV monitoring at 265 nm. The mobile phase consisted of methanol: 0.01 M NaH2PO4 (85:15; v/v) adjusted to pH 4.62 with 1 M NaOH. The detector response was linear in the range of 0.015-50 microg mL(-1). The limit of detection and the limit of quantification of the procedure were 0.0066 microg mL(-1) and 0.022 microg mL(-1), respectively. The retention time was 2.5 min for zalcitabine and 3.5 min for the internal standard. No interferences from tablet additives were observed and analysing tablets containing zalcitabine proved the applicability of the method. This method was also applied for the determination of zalcitabine in spiked human serum samples.

Calibration↗

Anodic adsorptive stripping voltammetry of the antihypertensive drug candesartan cilexetil at a glassy carbon electrode.

The electrochemical behaviour of candesartan cilexetil (CND) was investigated in an acetonitrile: supporting electrolyte mixture (30% acetonitrile) in the pH range 1.5-11.00 by cyclic, linear sweep, differential pulse (DPV), adsorptive stripping differential pulse (AdSDPV), square wave (SWV) and adsorptive stripping square wave (AdSSWV) voltammetric techniques. CND exhibited one wave and one peak to the anodic direction. The oxidation process was found to be irreversible and adsorption controlled. To obtain good sensitivity, the instrumental and accumulation variables were studied using DPV and SWV techniques. Two linear calibration plots were obtained for both techniques. The detection limits were 9.15 x 10(-7) M and 7.94 x 10(-6) M for AdSDPV and AdSSWV, respectively. The method was validated and successfully applied for the analysis of CND tablets.

Antihypertensive Agents↗

A rapid, sensitive high performance liquid chromatographic method for the determination of meropenem in pharmaceutical dosage form, human serum and urine.

A new, simple, precise and rapid high performance liquid chromatographic method was developed for the determination of meropenem in human serum, urine and pharmaceutical dosage forms. Chromatography was carried out on an LC(18) column using a mixture of 15 mM KH(2)PO(4):acetonitrile:methanol (84:12:4; v/v/v), adjusted to pH 2.8 with H(3)PO(4). The proposed method was conducted using a reversed-phase technique, UV monitoring at 307.6 nm and cefepime as an internal standard. The retention times were 5.98 and 7.47 min for cefepime and meropenem, respectively. The detector response was linear over the concentration range of 50-10,000 ng/mL. The detection limit of the procedure was found to be 22 ng/mL. The detection limit for meropenem in human plasma was 108.4 ng/mL and the corresponding value in human urine was 179.3 ng/mL. No interference from endogenous substances in human serum, urine and pharmaceutical preparation was observed. The proposed method is sufficiently sensitive for determination of the concentrations of meropenem and may have clinical application for its monitoring in patients receiving the drug.

Carbapenems↗

Synthesis and analytical evaluation by voltammetric studies of some new indole-3-propionamide derivatives.

Some biologically important and melatonin-related indole-3-propionamide derivatives were synthesized. The compounds synthesized were analyzed and characterized first by NMR and mass spectrometry and then investigated by analytical voltammetric techniques. Based on this study a simple, rapid and sensitive voltammetric method was developed for the determination of the indole derivatives that are readily oxidized at the carbon-based electrodes. The oxidative behavior of the indole derivatives was studied as a function of pH at a glassy carbon electrode. The characteristics of the corresponding electrode reaction were discussed.

Amides↗

Simultaneous determination of paracetamol and methocarbamol in tablets by ratio spectra derivative spectrophotometry and LC.

The application of the ratio spectra derivative spectrophotometry and high-performance liquid chromatography (HPLC) to the simultaneous determination of paracetamol (PAR) and methocarbamol (MET) in combined pharmaceutical tablets is presented. The spectrophotometric procedure is based on the use of the first derivative of the ratio spectra obtained by dividing the absorbtion spectrum of the binary mixtures by a standard spectrum of one of the compounds. The first derivative amplitudes were measured at 243.0 and 230.3 nm for the assay of PAR and MET, respectively. Calibration graphs were established for 2-30 microg ml for PAR and 2-36 microg/ml for MET in binary mixture. The detection limits for PAR and MET were found 0.097 and 0.079 microg/ml, respectively; while the quantification limits were 0.573 microg/ml for PAR and 1.717 microg/ml for MET. For the HPLC procedure, a reversed-phase column with a mobile phase of methanol-water (60:40, v/v), was used to separate both compounds with a detection of 274.0 nm. Linearity was obtained in the concentration range of 2 300 and 1.5-375 microg/ml for PAR and MET, respectively. The detection and quantification limits were found to be 0.42 and 1.4 microg/ml for PAR and 0.36 and 1.2 microg/ml for MET, respectively. The relative standard deviations were found to be less than 0.52%, indicating reasonable repeatibility of both methods. The proposed methods were successfully applied to the determination of these drugs in commercial tablets.

Acetaminophen↗

Simultaneous determination of valsartan and hydrochlorothiazide in tablets by first-derivative ultraviolet spectrophotometry and LC.

First-derivative ultraviolet spectrophotometry and high-performance liquid chromatography (HPLC) were used to determine valsartan and hydrochlorothiazide simultaneously in combined pharmaceutical dosage forms. The derivative procedure was based on the linear relationship between the drug concentration and the first derivative amplitudes at 270.6 and 335 nm for valsartan and hydrochlorothiazide, respectively. The calibration graphs were linear in the range of 12.0-36.1 microg x ml(-1) for valsartan and 4.0-12.1 microg x ml(-1) for hydrochlorothiazide. Furthermore, a high- performance liquid chromatographic procedure with ultraviolet detection at 225 nm was developed for a comparison method. For the HPLC procedure, a reversed phase column with a mobile phase of 0.02 M phosphate buffer (pH 3.2)-acetonitrile (55: 45; v/v), was used to separate for valsartan and hydrochlorothiazide. The plot of peak area ratio of each drug to the internal standard versus the respective concentrations of valsartan and hydrochlorothiazide were found to be linear in the range of 0.06-1.8 and 0.07-0.5 microg x ml(-1), respectively. The proposed methods were successfully applied to the determination of these drugs in laboratory-prepared mixtures and commercial tablets.

Antihypertensive Agents↗

Determination of olsalazine sodium in pharmaceuticals by differential pulse voltammetry.

The electrochemical oxidation of olsalazine sodium was investigated by cyclic, linear sweep, differential pulse and square wave voltammetry using glassy carbon disc electrode in different buffer systems. Best results were obtained for the determination of olsalazine using the differential pulse voltammetric technique in phosphate buffer at pH 7.0. The electroactive species exhibits a diffusion-controlled voltammetric wave and its differential pulse peak current shows a linear dependence on olsalazine concentration in the range between 2 x 10(-6) M and 2 x 10(-4) M. This relationship has been applied to the determination of olsalazine in commercial capsule dosage forms. The recovery study shows good accuracy and precision for the assay developed. A UV spectrophotometric assay is also reported for comparison.

Aminosalicylic Acids↗

Simultaneous determination of melatonin and pyridoxine in tablet formulations by differential pulse voltammetry.

A method has been developed for the simultaneous determination of melatonin (MT) and pyridoxine hydrochloride (PY) in pharmaceutical dosage forms by differential pulse voltammetry, based on the oxidation of both drugs at a glassy carbon electrode. Cyclic and linear scan voltammetry were used to examine the influence of pH, nature of the buffer, scan rate and concentration. The results in 0.5 M H2SO4 with 20% methanol allowed a method to be developed for the determination of MT and PY simultaneously and in the presence of each other in the ranges 2 x 10(-5)-8 x 10(-5) and 2 x 10(-5)-4 x 10(-4) M, with the detection limits of 5.86 x 10(-6) and 2.45 x 10(-6) M, respectively. The proposed method was successfully applied to the commercial tablets containing this drug combination without any interference by the excipients.

Antioxidants↗

Study on electrooxidation of cefadroxil monohydrate and its determination by differential pulse voltammetry.

In this work electrooxidation of cefadroxil monohydrate was investigated using a glassy carbon electrode depending on pH and supporting electrolyte. It was shown that the direct determination of the substance from capsules and in oral suspension could be made by differential pulse voltammetry (DPV). UV and first derivative UV spectrophotometric methods are also proposed as comparative methods.

Cefadroxil↗

High-performance liquid chromatographic analysis of verapamil and its application to determination in tablet dosage forms and to drug dissolution studies.

A high-performance liquid chromatographic procedure with two detectors is presented for the determination of verapamil in pharmaceutical dosage forms. The procedure is based on the use of reversed-phase high-performance liquid chromatography with UV and fluorimetric detectors. Each analysis required no longer than 6 min for both detection procedures. Quantification was achieved by measurement of the ratio of the peak area of the drug to the internal standard (fluoxetine) and the detection limit was 10 ng/ml for the UV detector and 750 pg/ml for the fluorimetric detector. There was no significant difference between inter- and intra-day studies for verapamil determined for two different concentrations (0.05 and 1.00 microgram/ml). This process could be used to determine verapamil concentrations in the range 0.025-50 and 0.0008-20 micrograms/ml for UV and fluorimetric detection, respectively. These methods were applied, without any interference from the excipients, for the determination of the drug in tablets and in drug dissolution studies. It is suggested that the proposed HPLC procedures could be used for routine quality control and dosage form assay of verapamil hydrochloride.

Calcium Channel Blockers↗

Voltammetric investigation of oxidation of zuclopenthixol and application to its determination in dosage forms and in drug dissolution studies.

The oxidative voltammetric behaviour of zuclopenthixol (ZPT) at a glassy carbon has been studied using cyclic, linear sweep and differential pulse voltammetry. Oxidation of the drug produced three pH dependent anodic steps (representing an irreversible oxidation). Using differential pulse voltammetry, the drug yielded a well-defined voltammetric response in phosphate buffer, pH 5.2 at + 0.82 V (vs. Ag/AgCl). This process could be used to determine ZPT concentrations in the range 8 x 10(-7)-2 x 10(-4) M. The method was applied, without any interferences from the excipients, to the determination of the drug in tablets and oral drops, and in drug dissolution studies.

Antipsychotic Agents↗