Biomedical subjects

S A Piletsky

Publications and source records attributed to S A Piletsky.

15 recordsLinked to original sources

PubMed2006

Molecularly imprinted polymers for the recognition of proteins: the state of the art.

Molecular imprinting has proved to be an effective technique for the creation of recognition sites on a polymer scaffold. Protein imprinting has been a focus for many chemists working in the area of molecular recognition, since the creation of synthetic polymers that can specifically recognise proteins is a very challenging but potentially extremely rewarding objective. It is expected that molecularly imprinted polymers (MIPs) with specificity for proteins will find application in medicine, diagnostics, proteomics, environmental analysis, sensors and drug delivery. In this review, the authors provide an overview of the progress achieved in the decade between 1994 and 2005, with respect to the challenging area of MIPs for protein recognition. The discussion furnishes a comparative analysis of different approaches developed, underlining their relative advantages and disadvantages and highlighting trends and possible future directions.

Adsorption↗

PubMed2005

A multi-biosensor based on immobilized Photosystem II on screen-printed electrodes for the detection of herbicides in river water.

A multi-biosensor for detection of herbicides and pollutants was constructed using various photosynthetic preparations as biosensing elements. The photosynthetic thylakoid from Spinacia oleracea L., Senecio vulgaris and its mutant resistant to atrazine were immobilized with (BSA-GA) on the surface of screen-printed sensors composed of a graphite-working electrode and Ag/AgCl reference electrode deposited on a polymeric substrate. The biosensor was composed of four flow cells with independent illumination of 650 nm to activate electron transfer in Photosystem II. The principle of the detection was based on the fact that herbicides selectively block electron transport activity in a concentration-dependent manner and that the four PSII biomediators show differential recognition activity toward herbicides. Changes of the activity were registered amperometrically as rate of photoreduction of the artificial electron acceptor DQ. The setup resulted in a reusable herbicide multibiosensor with a good stability (half-life of 16.7 h for spinach thylakoids) and limit of detection of about 10(-8) M for herbicides recovered in spring in river.

Adsorption↗

PubMed2003

MIP-based solid phase extraction cartridges combined with MIP-based sensors for the detection of microcystin-LR.

Microsystin-LR is one of the most widespread and dangerous toxins produced by the freshwater Cyanobacteria. The contamination of water supplies with microcystin-LR has been reported in several areas around the world and the development of an easy-to-use, rapid, robust and inexpensive sensor for this toxin is urgently required. In this work an artificial receptor for microcystin-LR was synthesised using the technique of molecular imprinting. The composition of the molecularly imprinted polymer (MIP) was optimised using computer modelling. The synthesised polymer was used both as a material for solid-phase extraction (SPE) and as a sensing element in a piezoelectric sensor. Using the combination of SPE followed by detection with a piezoelectric sensor the minimum detectable amount of toxin was 0.35 nM. The use of MIP-SPE provided up to 1000 fold pre-concentration, which was more than sufficient for achieving the required detection limit for microcystin-LR in drinking water (1 nM). This work is the first example where the same MIP receptor has been used successfully for both SPE and the corresponding sensor.

Adsorption↗

PubMed2001

Surface-grafted molecularly imprinted polymers for protein recognition.

A technique for coating microplate wells with molecularly imprinted polymers (MIPs) specific for proteins is presented. 3-Aminophenylboronic acid was polymerized in the presence of the following templates: microperoxidase, horseradish peroxidase, lactoperoxidase, and hemoglobin, via oxidation of the monomer by ammonium persulfate. This process resulted in the grafting of a thin polymer layer to the polystyrene surface of the microplates. Imprinting resulted in an increased affinity of the polymer toward the corresponding templates. The influence of the washing procedure, template concentration, and buffer pH on the polymer affinity was analyzed. It was shown that the stabilizing function of the support and spatial orientation of the polymer chains and template functional groups are the major factors affecting the imprint formation and template recognition. Easy preparation of the MIPs, their high stability, and their ability to recognize small and large proteins, as well as to discriminate molecules with small variations in charge, make this approach attractive and broadly applicable in biotechnology, assays and sensors.

Animals↗

PubMed2001

Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from water by surface photo-grafting polymerization.

Hydrophilized polyvinylidene fluoride microfiltration membranes were surface-modified in the presence of a template (terbumeton) in methanol with a graft copolymer of a functional monomer (2-acrylamido-2-methyl-1-propane sulfonic acid, AMPS, methacrylic acid, MAA, or acrylic acid, AA) and a cross-linker (N,N'-methylene-bis-acrylamide) using UV irradiation and benzophenone as photoinitiator. As result, membranes covered with a thin layer of imprinted polymer selective to terbumeton were obtained. Blank membranes were prepared with the same monomer composition, but in the absence of the template. The membranes' capacity to adsorb terbumetone from aqueous solution was evaluated yielding information regarding the effect of polymer synthesis (type and concentration of functional monomer, concentration of cross-linker) on the resulting membranes' recognition properties. UV spectroscopic studies of the interactions with terbumetone revealed that AMPS forms a stronger complex than MAA and AA. In agreement with that finding, imprinting with AMPS gave higher affinities than with MAA and AA. The terbumeton-imprinted membranes showed significantly higher sorption capability to this herbicide than to similar compounds (atrazine, desmetryn, metribuzine). With the novel surface modification technology, the low non-specific binding properties of the hydrophilized microfiltration membrane could successfully be combined with the receptor properties of molecular imprints, yielding substance-specific molecularly imprinted polymer composite membranes. The high affinity of these synthetic affinity membranes to triazine herbicides together with their straightforward and inexpensive preparation provides a good basis for the development of applications of imprinted polymers in separation processes such as solid-phase extraction.

Membranes, Artificial↗

PubMed2001

Molecular imprinting: at the edge of the third millennium.

Molecularly imprinted polymers (MIPs) represent a new class of materials that have artificially created receptor structures (1-3). Since their discovery in 1972, MIPs have attracted considerable interest from scientists and engineers involved with the development of chromatographic adsorbents, membranes, sensors and enzyme and receptor mimics.

Biotechnology↗

PubMed2001

"Bite-and-Switch" approach using computationally designed molecularly imprinted polymers for sensing of creatinine.

A method for the selective detection of creatinine is reported, which is based on the reaction between polymerised hemithioacetal, formed by allyl mercaptan, o-phthalic aldehyde, and primary amine leading to the formation of fluorescent isoindole complex. This method has been demonstrated previously for the detection of creatine using creatine-imprinted molecularly imprinted polymers (MIPs) Since MIPs created using traditional methods were unable to differentiate between creatine and creatinine, a new approach to the rational design of a molecularly imprinted polymer (MIP) selective for creatinine was developed using computer simulation. A virtual library of functional monomers was assigned and screened against the target molecule, creatinine, using molecular modelling software. The monomers giving the highest binding score were further tested using simulated annealing in order to mimic the complexation of the functional monomers with template in the monomer mixture. The result of this simulation gave an optimised MIP composition. The computationally designed polymer demonstrated superior selectivity in comparison to the polymer prepared using traditional approach, a detection limit of 25 microM and good stability. The "Bite-and-Switch" approach combined with molecular imprinting can be used for the design of assays and sensors, selective for amino containing substances.

Biosensing Techniques↗

PubMed2001

Substitution of antibodies and receptors with molecularly imprinted polymers in enzyme-linked and fluorescent assays.

A new technique for coating microtitre plates with molecularly imprinted polymers (MIP), specific for low-molecular weight analytes (epinephrine, atrazine) and proteins is presented. Oxidative polymerization was performed in the presence of template; monomers: 3-aminophenylboronic acid (APBA), 3-thiopheneboronic acid (TBA) and aniline were polymerized in water and the polymers were grafted onto the polystyrene surface of the microplates. It was found that this process results in the creation of synthetic materials with antibody-like binding properties. It was shown that the MIP-coated microplates are particularly useful for assay development. The high stability of the polymers and good reproducibility of the measurements make MIP coating an attractive alternative to conventional antibodies or receptors used in enzyme linked immunosorbent assay (ELISA).

Antibodies↗

PubMed2000

Capillary electrophoresis coupled to biosensor detection.

The present review highlights some modern aspects of biosensor revelation, a detection method which has already found a large number of applications in healthcare, food industry and environmental analysis. First, the concept of bio-recognition, which is at the heart of biosensor technology, is discussed, with emphasis on host-guest-like recognition mechanisms. This detection device has been successfully coupled, in its first applications, to chromatographic columns, which allow a high resolution of complex mixtures of analytes prior to interaction with the biosensing unit. The properties of the transducing elements, which should generate a signal (e.g., electrochemical, thermal, acoustic, optical) of proper intensity and of relative fast rise, are additionally evaluated and discussed. The review then focuses on potential applications of biosensing units in capillary electrophoresis (CE) devices. CE appears to be an excellent separation methodology to be coupled to biosensor detection, since it is based on miniaturized electrophoretic chambers, fast analysis times, complete automation in sample handling and data treatment and requires extremely small sample volumes. Although only a few applications of CE-based biosensors have been described up to the present, it is anticipated that this hyphenated technique could have a considerable expansion in the coming years.

Biosensing Techniques↗

PubMed2000

An assay for ascorbic acid based on polyaniline-coated microplates.

A technique for modification of the microtiter reader plates well with a polyaniline (PANI) film sensitive for ascorbic acid is presented. The principle of the analyte detection is based on monitoring the changes in optical absorption of the PANI film resulting from the reduction process initiated by ascorbic acid. The detection limit for ascorbic acid is 1 mg/L. Testing with real samples (soft drinks, fruit juices) gave good correlation of the method with iodimetric titration. High sensitivity, stability, and good reproducibility of the measurements make the proposed system an attractive alternative to traditional assays, used in medicine, ecology, and biotechnology.

Aniline Compounds↗

PubMed2000

Chemical grafting of molecularly imprinted homopolymers to the surface of microplates. Application of artificial adrenergic receptor in enzyme-linked assay for beta-agonists determination.

A technique for coating of microplate wells with a molecularly imprinted polymer (MIP), specific for epinephrine, is presented. 3-Aminophenylboronic acid was polymerized in the presence of epinephrine using oxidation of the monomer by ammonium persulfate. This process resulted in the grafting of a thin polymer layer onto the polystyrene surface of the microplates. The polymer affinity was determined by an enzyme-linked assay using a conjugate of horseradish peroxidase and norepinephrine (HRP-N). It was found that imprinting resulted in increased affinity of the polymer toward HRP-N and epinephrine. Influence of the buffer pH and concentration on the polymer affinity was analyzed. It was shown that the MIP-coated microplates could be used for assay development and drug screening. The high stability of the polymers and good reproducibility of the measurements make MIP coating an attractive alternative to traditional antibodies or receptors, used in ELISA.

Adrenergic beta-Agonists↗

PubMed2000

Polyaniline-coated microtiter plates for use in longwave optical bioassays.

A technique for coating the wells of microtiter-plates with polyaniline layers and with polyaniline/enzyme layers is presented. The resulting wells are shown to be useful for assaying enzyme substrates (as exemplified for glucose via pH) and hydrogen peroxide (via the redox properties of the film). Analyte detection is based on monitoring the absorption spectra of the polyaniline, which turn purple as a result of redox processes, or green on formation of acids by enzymatic reactions. Hydrogen peroxide (a species produced by all oxidases) and glucose (which yields protons on enzymatic oxidation) have been determined in the millimolar to micromolar concentration range. High sensitivity, film stability and good reproducibility of the measurements make the system an attractive alternative to existing biosensing schemes.

Aniline Compounds↗

PubMed1999

In vitro diagnostics in diabetes: meeting the challenge.

Diabetes is one of the leading causes of death and disability in the world. There is a large population in the world suffering from this disease, and the healthcare costs increase every year. It is a chronic disorder resulting from insulin deficiency and hyperglycemia and has a high risk of development of complications for the eyes, kidneys, peripheral nerves, heart, and blood vessels. Quick diagnosis and early prevention are critical for the control of the disease status. Traditional biosensors such as glucose meters and glycohemoglobin test kits are widely used in vitro for this purpose because they are the two major indicators directly involved in diabetes diagnosis and long-term management. The market size and huge demand for these tests make it a model disease to develop new approaches to biosensors. In this review, we briefly summarize the principles of biosensors, the current commercial devices available for glucose and glycohemoglobin measurements, and the recent work in the area of artificial receptors and the potential for the development of new devices for diabetes specifically connected with in vitro monitoring of glucose and glycohemoglobin HbA(1c).

Biosensing Techniques↗

PubMed1998

Spectroscopic studies of the molecular imprinting self-assembly process.

A method for the rapid estimation of the extent of complex formation in molecular imprinting prepolymerization mixtures is described. By the use of a UV spectroscopy titration procedure, apparent binding constants for such self-assembly processes have been obtained. This method was used for comparison of the interactions between a dipeptide template (N-acetyl-L-phenylalaninyl-L-tryptophanyl methyl ester) and the functional monomer methacrylic acid, and the monomer analogues acetic acid and trifluoroacetic acid. The importance of template-monomer association during the molecular imprinting prepolymerization phase is discussed with respect to the systems studied.

Acetic Acid↗

PubMed1998

The rational use of hydrophobic effect-based recognition in molecularly imprinted polymers.

A novel molecularly imprinted polymer (MIP) system selective for D-phenylalanine is described where polymerization is performed in aqueous solution. The unique polymer system comprises a hydrophobic moiety-selective functional monomer, polymerizable beta-cyclodextrin, an electrostatic interacting functional monomer, 2-acryloylamido-2-methylpropane sulfonic acid (AMPSA), and the crosslinking agent N,N'-diacryloylpiperazine. Chromatographic evaluation of polymer-ligand recognition characteristics demonstrated ligand selectivity by the MIP and that optimal recognition was achieved through a balance of hydrophobic and electrostatic ligand-polymer interactions, indicating that recognition in these systems is regulated by enthalpy-entropy compensation. The imprinting effect was shown to be sufficient to reverse the inherent selectivity of cyclodextrin for L-phenylalanine.

Carbohydrate Sequence↗