Biomedical subjects

S Bron

Publications and source records attributed to S Bron.

At least 37 records · Page 2Linked to original sources

PubMed1999

Different mechanisms for thermal inactivation of Bacillus subtilis signal peptidase mutants.

The type I signal peptidase SipS of Bacillus subtilis is of major importance for the processing of secretory precursor proteins. In the present studies, we have investigated possible mechanisms of thermal inactivation of five temperature-sensitive SipS mutants. The results demonstrate that two of these mutants, L74A and Y81A, are structurally stable but strongly impaired in catalytic activity at 48 degrees C, showing the (unprecedented) involvement of the conserved leucine 74 and tyrosine 81 residues in the catalytic reaction of type I signal peptidases. This conclusion is supported by the crystal structure of the homologous signal peptidase of Escherichia coli (Paetzel, M., Dalbey, R. E., and Strynadka, N. C. J. (1998) Nature 396, 186-190). In contrast, the SipS mutant proteins R84A, R84H, and D146A were inactivated by proteolytic degradation, indicating that the conserved arginine 84 and aspartic acid 146 residues are required to obtain a protease-resistant conformation. The cell wall-bound protease WprA was shown to be involved in the degradation of SipS D146A, which is in accord with the fact that SipS has a large extracytoplasmic domain. As WprA was not involved in the degradation of the SipS mutant proteins R84A and R84H, we conclude that multiple proteases are responsible for the thermal inactivation of temperature-sensitive SipS mutants.

Bacillus subtilis↗

PubMed1999

The role of lipoprotein processing by signal peptidase II in the Gram-positive eubacterium bacillus subtilis. Signal peptidase II is required for the efficient secretion of alpha-amylase, a non-lipoprotein.

Computer-assisted analyses indicate that Bacillus subtilis contains approximately 300 genes for exported proteins with an amino-terminal signal peptide. About 114 of these are lipoproteins, which are retained in the cytoplasmic membrane. We have investigated the importance of lipoprotein processing by signal peptidase II (SPase II) for cellular homeostasis, using cells lacking SPase II. The results show that lipoprotein processing is important for cell viability at low and high temperatures, suggesting that lipoproteins are essential for growth under these conditions. Although certain lipoproteins are required for the development of genetic competence, sporulation, and germination, these developmental processes were not affected in the absence of SPase II. Cells lacking SPase II accumulated lipid-modified precursor and mature-like forms of PrsA, a folding catalyst for secreted proteins. These forms of PrsA seem to have a reduced activity, as the secretion of alpha-amylase was strongly impaired. Unexpectedly, type I signal peptidases, which process secretory preproteins, were not involved in alternative amino-terminal processing of pre-PrsA in the absence of SPase II. In conclusion, processing of lipoproteins by SPase II in B. subtilis is not strictly required for lipoprotein function, which is surprising as lipoproteins and type II SPases seem to be conserved in all eubacteria.

Amino Acid Sequence↗

PubMed1999

Evaluation of bottlenecks in the late stages of protein secretion in Bacillus subtilis.

Despite a high capacity for secretion of homologous proteins, the secretion of heterologous proteins by Bacillus subtilis is frequently inefficient. In the present studies, we have investigated and compared bottlenecks in the secretion of four heterologous proteins: Bacillus lichenifomis alpha-amylase (AmyL), Escherichia coli TEM beta-lactamase (Bla), human pancreatic alpha-amylase (HPA), and a lysozyme-specific single-chain antibody. The same expression and secretion signals were used for all four of these proteins. Notably, all identified bottlenecks relate to late stages in secretion, following translocation of the preproteins across the cytoplasmic membrane. These bottlenecks include processing by signal peptidase, passage through the cell wall, and degradation in the wall and growth medium. Strikingly, all translocated HPA was misfolded, its stability depending on the formation of disulfide bonds. This suggests that the disulfide bond oxidoreductases of B. subtilis cannot form the disulfide bonds in HPA correctly. As the secretion bottlenecks differed for each heterologous protein tested, it is anticipated that the efficient secretion of particular groups of heterologous proteins with the same secretion bottlenecks will require the engineering of specifically optimized host strains.

Amino Acid Sequence↗

PubMed1999

The plasmid-encoded signal peptidase SipP can functionally replace the major signal peptidases SipS and SipT of Bacillus subtilis.

The gram-positive eubacterium Bacillus subtilis is the organism with the largest number of paralogous type I signal peptidases (SPases) known. These are specified both by chromosomal and plasmid-borne genes. The chromosomally encoded SPases SipS and SipT have a major function in precursor processing, and cells depleted of SipS and SipT stop growing and die. In this study, we show that the SPase SipP, specified by the B. subtilis plasmid pTA1015, can functionally replace SipS and SipT, unlike the three chromosomally encoded SPases with a minor function in protein secretion (i.e., SipU, SipV, and SipW). Unexpectedly, SipP is not specifically required for the processing and secretion of Orf1p, which is specified by a gene that is cotranscribed with sipP. These two genes form a conserved structural module of rolling-circle plasmids from B. subtilis. As previously shown for the chromosomal sipS and sipT genes, the transcription of plasmid-borne copies of sipP is temporally controlled, reaching maximal levels during the post-exponential growth phase when the cells secrete proteins at high levels. However, increased transcription of sipP starts at the end of exponential growth, about 2 h earlier than that of sipS and sipT. These data suggest that SipP fulfills a general role in the secretory precursor processing of pTA1015-containing cells.

Bacillus subtilis↗

PubMed1998

Protein secretion and possible roles for multiple signal peptidases for precursor processing in bacilli.

Bacillus subtilis is one of the best known Gram-positive bacteria at both the genetic and physiological level. The entire sequence of its chromosome is known and efficient tools for the genetic modification of this bacterium are available. Moreover, B. subtilis and related Bacillus species are widely used in biotechnology, in particular for the production of secreted enzymes. Although bacilli can secrete large amounts of several native enzymes, the use of these bacteria for the production of heterologous enzymes has frequently resulted in low yields. Here we describe the identification of several components of the Bacillus protein secretion machinery. These components can now be engineered for optimal protein secretion. Special emphasis is given on type I signal peptidases, which remove signal peptides from secretory precursor proteins. Five genes specifying such enzymes (sip, for signal peptidase) are present on the B. subtilis chromosome. Although none of the sip genes is essential by itself, a specific combination of mutations in these genes is lethal. The expression pattern of some of the sip genes coincides with that of many secretory proteins, which seems to reflect an adaptation to high demands on the secretion machinery. Although the various B. subtilis type I signal peptidases have at least partially overlapping substrate specificities, clear differences in substrate preferences are also evident. These observations have implications for the engineering of the processing apparatus for improved secretion of native and heterologous proteins by Bacillus.

Bacillus↗

PubMed1998

SecDF of Bacillus subtilis, a molecular Siamese twin required for the efficient secretion of proteins.

In the present studies, we show that the SecD and SecF equivalents of the Gram-positive bacterium Bacillus subtilis are jointly present in one polypeptide, denoted SecDF, that is required to maintain a high capacity for protein secretion. Unlike the SecD subunit of the pre-protein translocase of Escherichia coli, SecDF of B. subtilis was not required for the release of a mature secretory protein from the membrane, indicating that SecDF is involved in earlier translocation steps. Strains lacking intact SecDF showed a cold-sensitive phenotype, which was exacerbated by high level production of secretory proteins, indicating that protein translocation in B. subtilis is intrinsically cold-sensitive. Comparison with SecD and SecF proteins from other organisms revealed the presence of 10 conserved regions in SecDF, some of which appear to be important for SecDF function. Interestingly, the SecDF protein of B. subtilis has 12 putative transmembrane domains. Thus, SecDF does not only show sequence similarity but also structural similarity to secondary solute transporters. Our data suggest that SecDF of B. subtilis represents a novel type of the SecD and SecF proteins, which seems to be present in at least two other organisms.

Amino Acid Sequence↗

PubMed1998

Functional analysis of the secretory precursor processing machinery of Bacillus subtilis: identification of a eubacterial homolog of archaeal and eukaryotic signal peptidases.

Approximately 47% of the genes of the Gram-positive bacterium Bacillus subtilis belong to paralogous gene families. The present studies were aimed at the functional analysis of the sip gene family of B. subtilis, consisting of five chromosomal genes, denoted sipS, sipT, sipU, sipV, and sipW. All five sip genes specify type I signal peptidases (SPases), which are actively involved in the processing of secretory preproteins. Interestingly, strains lacking as many as four of these SPases could be obtained. As shown with a temperature-sensitive SipS variant, only cells lacking both SipS and SipT were not viable, which may be caused by jamming of the secretion machinery with secretory preproteins. Thus, SipS and SipT are of major importance for protein secretion. This conclusion is underscored by the observation that only the transcription of the sipS and sipT genes is temporally controlled via the DegS-DegU regulatory system, in concert with the transcription of most genes for secretory preproteins. Notably, the newly identified SPase SipW is highly similar to SPases from archaea and the ER membrane of eukaryotes, suggesting that these enzymes form a subfamily of the type I SPases, which is conserved in the three domains of life.

Amino Acid Sequence↗

PubMed1998

Characterization of yhcN, a new forespore-specific gene of Bacillus subtilis.

A new Bacillus subtilis sporulation-specific gene, yhcN, has been identified, the expression of which is dependent on the forespore-specific sigma factor sigmaG and to a much lesser extent on sigmaF. A translational yhcN-lacZ fusion is expressed at a very high level in the forespore, and the protein encoded by yhcN was detected in the inner spore membrane. A yhcN mutant sporulates normally and yhcN spores have identical resistance properties to wild-type spores. However, the outgrowth of yhcN spores is slower than that of wild-type spores.

Amino Acid Sequence↗

PubMed1998

Sequence specificity of illegitimate plasmid recombination in Bacillus subtilis: possible recognition sites for DNA topoisomerase I.

Previous work in our group indicated that structural plasmid instability in Bacillus subtilis is often caused by illegitimate recombination between non-repeated sequences, characterized by a relatively high AT content. Recently we developed a positive selection vector for analysis of plasmid recombination events in B. subtilis which enables measurement of recombination frequencies without interference of selective growth differences of cells carrying wild-type or deleted plasmids. Here we have used this system to further analyse the sequence specificity of illegitimate plasmid recombination events and to assess the role of the host-encoded DNA topoisomerase I enzyme in this process. Several lines of evidence suggest that single-strand DNA nicks introduced by DNA topoisomerase I are a major source of plasmid deletions in pGP100. First, strains overproducing DNA topoisomerase I showed increased levels of plasmid deletion. Second, these deletions occurred predominantly (>90% of the recombinants) between non-repeated DNA sequences, the majority of which resemble potential DNA topoisomerase I target sites. Sequence alignment of 66 deletion end-points confirmed the previously reported high AT content and, most importantly, revealed a highly conserved C residue at position -4 relative to the site of cleavage at both deletion termini. Based on these genetic data we propose the following putative consensus cleavage site for DNA topoisomerase I of B.subtilis: 5'-A/TCATA/TTAA/TA/TA-3'.

Bacillus subtilis↗

PubMed1998

Rolling-circle plasmids from Bacillus subtilis: complete nucleotide sequences and analyses of genes of pTA1015, pTA1040, pTA1050 and pTA1060, and comparisons with related plasmids from gram-positive bacteria.

Most small plasmids of Gram-positive bacteria use the rolling-circle mechanism of replication and several of these have been studied in considerable detail at the DNA level and for the function of their genes. Although most of the common laboratory Bacillus subtilis 168 strains do not contain plasmids, several industrial strains and natural soil isolates do contain rolling-circle replicating (RCR) plasmids. So far, knowledge about these plasmids was mainly limited to: (i) a classification into seven groups, based on size and restriction patterns; and (ii) DNA sequences of the replication region of a limited number of them. To increase the knowledge, also with respect to other functions specified by these plasmids, we have determined the complete DNA sequence of four plasmids, representing different groups, and performed computer-assisted and experimental analyses on the possible function of their genes. The plasmids analyzed are pTA1015 (5.8 kbp), pTA1040 (7.8 kbp), pTA1050 (8.4 kbp), and pTA1060 (8.7 kbp). These plasmids have a structural organization similar to most other known RCR plasmids. They contain highly related replication functions, both for leading and lagging strand synthesis. pTA1015 and pTA1060 contain a mobilization gene enabling their conjugative transfer. Strikingly, in addition to the conserved replication modules, these plasmids contain unique module(s) with genes which are not present on known RCR plasmids of other Gram-positive bacteria. Examples are genes encoding a type I signal peptidase and genes encoding proteins belonging to the family of response regulator aspartate phosphatases. The latter are likely to be involved in the regulation of post-exponential phase processes. The presence of these modules on plasmids may reflect an adaptation to the special conditions to which the host cells were exposed.

Bacillus subtilis↗

PubMed1998

The Sip(Sli) gene of Streptomyces lividans TK24 specifies an unusual signal peptidase with a putative C-terminal transmembrane anchor.

Type I signal peptidases (SPases) are a widespread family of enzymes which remove signal peptides from proteins translocated across cellular membranes. Here, we report the first isolation of a gene coding for type I signal peptidase of Streptomyces, denoted Sip(Sli). The sip(sli) gene specifies a protein of 291 amino acids. Thus Sip(Sli) is much larger (approximately 100 amino acids) than other known SPases of Gram-positive bacteria and resembles SPases of Gram-negative bacteria, showing the highest degree of similarity to an SPase of the cyanobacterium Phormidium laminosum. Sip(Sli) contains conserved serine and lysine residues, which are believed to be required for the catalytic activity. Similar to other known SPases from Gram-positive bacteria, Sip(Sli) seems to have only one N-terminal transmembrane anchor. In addition, Sip(Sli) seems to contain a second transmembrane anchor at the C-terminus, which is an unusual feature for type I signal peptidases.

Amino Acid Sequence↗

PubMed1997

The complete genome sequence of the gram-positive bacterium Bacillus subtilis.

Bacillus subtilis is the best-characterized member of the Gram-positive bacteria. Its genome of 4,214,810 base pairs comprises 4,100 protein-coding genes. Of these protein-coding genes, 53% are represented once, while a quarter of the genome corresponds to several gene families that have been greatly expanded by gene duplication, the largest family containing 77 putative ATP-binding transport proteins. In addition, a large proportion of the genetic capacity is devoted to the utilization of a variety of carbon sources, including many plant-derived molecules. The identification of five signal peptidase genes, as well as several genes for components of the secretion apparatus, is important given the capacity of Bacillus strains to secrete large amounts of industrially important enzymes. Many of the genes are involved in the synthesis of secondary metabolites, including antibiotics, that are more typically associated with Streptomyces species. The genome contains at least ten prophages or remnants of prophages, indicating that bacteriophage infection has played an important evolutionary role in horizontal gene transfer, in particular in the propagation of bacterial pathogenesis.

Bacillus subtilis↗

PubMed1997

Bacillus subtilis contains four closely related type I signal peptidases with overlapping substrate specificities. Constitutive and temporally controlled expression of different sip genes.

Most biological membranes contain one or two type I signal peptidases for the removal of signal peptides from secretory precursor proteins. In this respect, the Gram-positive bacterium Bacillus subtilis seems to be exceptional, because it contains at least four chromosomally-encoded type I signal peptidases, denoted SipS, SipT, SipU, and SipV. Here, we report the identification of the sipT and sipV genes, and the functional characterization of SipT, SipU, and SipV. The four signal peptidases have similar substrate specificities, as they can all process the same beta-lactamase precursor. Nevertheless, they seem to prefer different pre-proteins, as indicated by studies on the processing of the pre-alpha-amylase of Bacillus amyloliquefaciens in strains lacking SipS, SipT, SipU, or SipV. The sipU and sipV genes are constitutively transcribed at a low level, suggesting that they are required for processing of (pre-)proteins secreted during all growth phases. In contrast, the transcription of sipS and sipT is temporally controlled, in concert with the expression of the genes for most secretory proteins, which suggests that SipS and SipT serve to increase the secretory capacity of B. subtilis. Taken together, our findings suggest that SipS, SipT, SipU, and SipV serve different functions during the exponential and post-exponential growth phase of B. subtilis.

Amino Acid Sequence↗

PubMed1997

The chemistry and enzymology of the type I signal peptidases.

The discovery that proteins exported from the cytoplasm are typically synthesized as larger precursors with cleavable signal peptides has focused interest on the peptidases that remove the signal peptides. Here, we review the membrane-bound peptidases dedicated to the processing of protein precursors that are found in the plasma membrane of prokaryotes and the endoplasmic reticulum, the mitochondrial inner membrane, and the chloroplast thylakoidal membrane of eukaryotes. These peptidases are termed type I signal (or leader) peptidases. They share the unusual feature of being resistant to the general inhibitors of the four well-characterized peptidase classes. The eukaryotic and prokaryotic signal peptidases appear to belong to a single peptidase family. This review emphasizes the evolutionary concepts, current knowledge of the catalytic mechanism, and substrate specificity requirements of the signal peptidases.

Bacterial Proteins↗

PubMed1997

Role of enzymes of homologous recombination in illegitimate plasmid recombination in Bacillus subtilis.

The structural stability of plasmid pGP1, which encodes a fusion between the penicillinase gene (penP) of Bacillus licheniformis and the Escherichia coli lacZ gene, was investigated in Bacillus subtilis strains expressing mutated subunits of the ATP-dependent nuclease, AddAB, and strains lacking the major recombination enzyme, RecA. Strains carrying a mutation in the ATP-binding site of the AddB subunit exhibited high levels of plasmid instability, whereas a comparable mutation in the A subunit did not affect plasmid stability. Using an alternative plasmid system, pGP100, we were able to demonstrate that the differences in stability reflected differences in initial recombination frequencies. Based on a comparison of endpoint sequences observed in the various hosts, we speculate that at least two different mechanisms underlie the deletion events involved, the first (type I) occurring between nonrepeated sequences, and the second (type II) occurring between short direct repeats (DRs). The latter event was independent of single-strand replication intermediates and the mode of replication and possibly requires the introduction of double-strand breaks (DSBs) between the repeats. In the absence of functional AddAB complex, or the AddB subunit, DSBs are likely to be processed via a recA-independent mechanism, resulting in intramolecular recombination between the DRs. In wild-type cells, such DSBs are supposed to be either repaired by a mechanism involving AddAB-dependent recombination or degraded by the AddAB-associated exonuclease activity. Plasmid stability assays in a recA mutant showed that (i) the level of deletion formation was considerably higher in this host and (ii) that deletions between short DRs occurred at higher frequencies than those described previously for the parental strain. We propose that in wild-type cells, the recA gene product is involved in recombinational repair of DSBs.

Adenosine Triphosphate↗

PubMed1996

Cloning of heterologous genes specifying detrimental proteins on pUC-derived plasmids in Escherichia coli.

A system is described that enables the cloning of genes specifying detrimental proteins in Escherichia coli. The system is based on pUC plasmids and was developed for the expression of the Bacillus subtilis csaA gene, which is lethal when expressed at high levels. Suppressor strains that tolerate the presence of plasmids for high-level expression of csaA were isolated, which contained small cryptic deletion variants of the parental plasmid in high copy numbers. The cryptic plasmids consisted mainly of the pUC replication functions and lacked the csaA region and selectable markers. The co-resident, incompatible, cryptic plasmids enabled the maintenance of the csaA plasmids by reducing their copy number 20-fold, which resulted in a concomitant 3- to 7-fold reduction in the expression of plasmid-encoded genes. Strains carrying these cryptic endogenous plasmids proved to be useful for the construction of pUC-based recombinant plasmids carrying other genes, such as the skc gene of Streptococcus equisimilis, which cannot be cloned in high copy numbers in E. coli. Several strategies to reduce production levels of heterologous proteins specified by plasmids are compared.

Bacterial Outer Membrane Proteins↗

PubMed1996

A positive selection vector for the analysis of structural plasmid instability in Bacillus subtilis.

A system for the positive selection of structural plasmid rearrangements in Bacillus subtilis was developed. Random deletions removing a transcription terminator structure in the assay plasmid, designated pGP100, resulted in expression of the cat-86 gene, under control of a constitutive bacteriophage promoter. The resulting chlorampenicol-resistant colonies were analyzed for plasmid contents and were shown, by restriction analysis, to contain initially both the intact parental plasmid and a deletion variant. Sequence analysis of deletion derivatives revealed a consensus target site (5'-A-T-T-A-A/T-3') at or near deletion termini, which resembles topoisomerase I target sites. Endpoints on one side of the deletions were found to be clustered in the promoter region of the tetracycline resistance gene present on pGP100, the gene product of which is an integral membrane protein. Furthermore, deletion of the genes encoding the ATP-dependent exonuclease, AddAB, severely reduced the structural stability of pGP100. The data indicate that similar mechanisms underlie deletion formation in pGP100, and a different plasmid-based system, pGP1, which we have analyzed previously.

Bacillus subtilis↗

PubMed1996

Molecular analysis of the replication origin of the Lactococcus lactis plasmid pCJ305.

The replication origin region, ori, of the Lactococcus lactis subsp. lactis plasmid pCI305 contains three-and-one-half directly repeated 22-bp sequences and two inverted repeat sequences, IR1 and IR2. These inverted repeat sequences overlap the promoter of the repB gene, which encodes a protein (RepB) essential for plasmid replication. Gel retardation assays, using lactococcal crude cell extracts in which RepB was overproduced, were used to demonstrate that the replication protein interacts with DNA sequences within the origin region. IR1 was identified as a RepB binding site. The -35 region of the repB promoter is contained within the loop of the potential stem-loop structure of IR1, suggesting autoregulation of repB. The pCI305 RepB failed to interact with DNA sequences within the minimal replicons of nine other members of the pCI305 family of plasmids and it was concluded that this DNA-protein interaction was replicon specific. In vivo studies were performed to determine the role of the three-and-one-half copies of the 22-bp sequences. When this sequence was provided in trans on a compatible vector, it resulted in the loss of pCI305 from the cell population (incompatibility).

Bacterial Proteins↗