Biomedical subjects

S Cosnier

Publications and source records attributed to S Cosnier.

14 recordsLinked to original sources

PubMed2005

Insulator semiconductor structures coated with biodegradable latexes as encapsulation matrix for urease.

A new urea biosensor for clinical applications was obtained by immobilization of urease within different latex polymers functionalized by hydroxy, acetate and lactobionate groups. Responses of these biosensors based on pH-ion-selective field effect insulator-semiconductor (IS) systems to urea additions were evaluated by capacitance measurements. UV-visible spectroscopy was used to check the urease activity in various matrixes. A good retention of the catalytic urease activity in the case of the cationic polymers was observed. In addition, rotating disk electrode experiments were carried out to determine the matrix permeability characteristics. Under optimal conditions, i.e. buffer capacity corresponding to 5 mM phosphate buffer, the urea enzyme insulator semiconductor (ENIS) sensors showed a linear response for urea concentrations in the range 10(-1.5) to 10(-4)M. Furthermore, kinetic parameters for the immobilized urease were obtained from Lineweaver-Burk plot. Clearly, a fast response and a good adhesion for the urease-acetate polymer composite films, prepared without using glutaraldehyde as cross-linking agent was observed.

Absorbable Implants↗

PubMed2005

Optical fiber immunosensor based on a poly(pyrrole-benzophenone) film for the detection of antibodies to viral antigen.

We describe herein a newly developed optical microbiosensor for the diagnosis of hepatitis C virus (HCV) by using a novel photoimmobilization methodology based on a photoactivable electrogenerated polymer film deposited upon surface-conductive fiber optics, which are then used to link a biological receptor to the fiber tip through light mediation. This fiber-optic electroconductive surface modification is done by the deposition of a thin layer of indium tin oxide on the silica surface of the fiber optics. Monomers are then electropolymerized onto the conductive metal oxide surface; thereafter, the fibers are immersed in a solution containing HCV-E2 envelope protein antigen and illuminated with UV light (wavelength approximately 345 nm). As a result of the photochemical reaction, a thin layer of the antigen becomes covalently bound to the benzophenone-modified surface. The photochemically modified fiber optics were tested as immunosensors for the detection of anti-E2 protein antibody analyte that was measured through chemiluminescence reaction. The biosensor was tested for sensitivity, specificity, and overall practicality. Our results suggest that the detection of anti-E2 antibodies with this microbiosensor may enhance significantly HCV serological standard testing especially among patients during dialysis, which were diagnosed as HCV negative, by standard immunological tests, but were known to carry the virus. If transformed into an easy to use procedure, this assay might be used in the future as an important clinical tool for HCV screening in blood banks.

Benzophenones↗

PubMed2005

Hydrogenase electrodes for fuel cells.

Considering crucial problems that limit use of platinum-based fuel cells, i.e. cost and availability, poisoning by fuel impurities and low selectivity, we propose electrocatalysis by enzymes as a valuable alternative to noble metals. Hydrogenase electrodes in neutral media achieve hydrogen equilibrium potential (providing 100% energy conversion), and display high activity in H(2) electrooxidation, which is similar to that of Pt-based electrodes in sulphuric acid. In contrast with platinum, enzyme electrodes are highly selective for their substrates, and are not poisoned by fuel impurities. Hydrogenase electrodes are capable of consuming hydrogen directly from microbial media, which ensures their use as fuel electrodes in treatment of organic wastes.

Catalysis↗

PubMed2004

Biotinylated polypyrrole films: an easy electrochemical approach for the reagentless immobilization of bacteria on electrode surfaces.

Biotinylated bacteria were immobilized onto biotin/avidin modified electrode surfaces. Firstly, an electrospotting deposition method, followed by fluorescence microscopy, showed that bacteria were specifically grafted onto a gold surface. Fluorescence intensity versus the quantity of bacteria deposited on the surface was correlated, allowing determination of the microbial saturation point. Secondly, biotinylated bacteria were immobilized onto a glassy carbon macro-electrode in order to assess immobilized bacterial denitrification activity. During a 7-day trial, the modified electrode completely denitrified 5 mM nitrate, with a rate of 1.66 mM/day over the first 3 days. When the same electrode was placed in fresh nitrate solution, the denitrification rate dropped to 0.80 mM/day. Crucially, the immobilized bacteria did not become detached from the electrode during the study.

Bacterial Adhesion↗

PubMed2003

Composite carbon paste biosensor for phenolic derivatives based on in situ electrogenerated polypyrrole binder.

Amperometric biosensors based on new composite carbon paste (CPE) electrodes have been designed for the determination of phenolic compounds. The composite CPEs were prepared by in situ generation of polypyrrole (PPy) within a paste containing the enzyme polyphenol oxidase (PPO). The best paste composition (enzyme/pyrrole monomer/carbon particles/Nujol) was determined for a model enzyme, glucose oxidase, according to the enzymatic activity of the resulting electrodes and to the enzyme leakage from the paste during storage in phosphate buffer. The in situ electrogenerated PPy enables improvement in enzyme immobilization within the paste since practically no enzyme was lost in solution after 72 h of immersion. Moreover, the enzyme activity remains particularly stable under storage since the biocomposite structure maintains 80% of its activity after 1-month storage. Following the optimization of the paste composition, PPO-based carbon paste biosensors were prepared and presented excellent analytical properties toward catechol detection with a sensitivity of 4.7 A M(-1) cm(-2) and a response time lower than 20 s. The resulting biosensors were finally applied to the determination of epicatechin and ferulic acid as flavonol and polyphenol model, respectively.

Journal Article↗

PubMed2003

Use of competitive inhibition for driving sensitivity and dynamic range of urea ENFETs.

An urea biosensor based on urease-BSA (bovine serum albumin) membrane immobilised on the surface of an ion-sensitive field effect transistor (ISFET) has been studied in a mix buffer solution composed of potassium phosphate, Tris, citric acid and sodium tetraborate. In this mix buffer, the biosensor showed a dynamic larger than the one observed in a phosphate or Tris buffer. Investigation of the individual effect of each component of the buffer solution on the biosensor response has shown that tetraborate anion acts as a strong competitive inhibitor for the hydrolysis reaction of urea catalysed by urease. The biosensor response was investigated in a phosphate buffer with different concentrations of tetraborate anion. The results showed that the apparent constant of Michaelis-Menten, K(m(app)), increases from 4.3 to 79.3 mM, for experiments realised without and with 0.5 mM sodium tetraborate, respectively. The mean value, determined graphically, for the inhibition constant, K(i), was 29 microM. The graphical representation of biosensor calibration curves in semilogarithmic co-ordinates showed that the linear range of the biosensor can be extended up to three orders of magnitude, allowing an urea detection in a concentration range 0-100 mM.

Biosensing Techniques↗

PubMed2002

Urea biosensors based on immobilization of urease into two oppositely charged clays (laponite and Zn-Al layered double hydroxides).

Enzyme-based field effect transistors (ENFETs) for urea determination were developed based on the immobilization of urease within two different clay matrixes, one cationic (Laponite) and the other anionic (layered double hydroxide (LDH)), cross-linked with glutaraldehyde. The biosensor based on the enzyme immobilized in Laponite shows a greater sensitivity and smaller dynamic linear range, because the enzymatic reaction is protected from the effect of the buffer capacity of the outer medium. The apparent Michaelis-Menten constant, Km(app), is quite similar for both biosensors. Inhibition of the enzyme by sodium tetraborate was investigated. Tetraborate acts as a competitive inhibitor for urease in the two different types of clay, the inhibitor effect being stronger for the LDH/urease biosensor. In particular, the maximum limit of the dynamic linear range extends from 1.4 mM in the absence of the inhibitor to 12 mM in the presence of 0.5 mM tetraborate. The Km(app) values in the presence of 0.5 mM tetraborate for Laponite and LDH biomembranes were 10 and 62 mM, respectively. Comparison of the inhibition constant values, Ki 0.16 and 0.05 mM for Laponite and LDH biosensors, respectively, clearly indicates a stronger enzyme-inhibitor interaction in the LDH/urease biomembrane.

Aluminum Silicates↗

PubMed2002

Impedimetric immunosensor using avidin-biotin for antibody immobilization.

The potentialities of an electrodeposited biotinylated polypyrrole film as an immobilisation matrix for the fabrication of impedimetric immunosensors are described. Biotinylated antibody (anti-human IgG), used as a model system, was attached to free biotin groups on the electrogenerated polypyrrole film using avidin as a coupling reagent. This immobilization method allows to obtain a highly reproducible and stable device. The resulting immunosensor has a linear dynamic range of 10-80 ng ml(-1) of antigen and a detection limit of 10 pg ml(-1). Furthermore, this immunosensor exhibited minor loss in response after two regeneration steps.

Avidin↗

PubMed2002

Direct and electrically wired bioelectrocatalysis by hydrogenase from Thiocapsa roseopersicina.

Hydrogen enzyme electrodes based on direct and mediated bioelectrocatalysis were developed. Direct bioelectrocatalysis of hydrogen oxidation/evolution was observed for hydrogenase adsorbed on carbon filament material. The equilibrium hydrogen potential was achieved on mediatorless hydrogen enzyme electrodes in hydrogen atmosphere. The electrocatalytic activity of hydrogenase in direct bioelectrocatalysis of hydrogen oxidation was two orders of magnitude higher compared to platinum. The reported electrode remained 50% activity after 6 months of storage with periodical testing. Wired bioelectrocatalysis was achieved by adsorption of hydrogenase onto electropolymerized redox mediator N-methyl-N'-(12-pyrrol-1-yl-dodecyl)-4,4'-bipyridinium ditetrafluoroborate.

Catalysis↗

PubMed2001

Mediated electrochemical detection of catechol by tyrosinase-based poly(dicarbazole) electrodes.

A new dicarbazole derivative functionalised by an N-hydroxysuccinimide group has been synthesised and electrochemically characterised. Upon oxidative electropolymerisation of this monomer in organic electrolytes, electroactive poly(dicarbazole) films were formed on platinum electrodes. The subsequent chemical grafting of tyrosinase on the poly(dicarbazole) film was easily performed by immersion in an enzymatic aqueous solution. The amperometric response of the resulting biosensors to catechol has been studied at -0.2 V vs. saturated calomel electrode (SCE). Since the reduction of quinone generates radicals which may induce electrode fouling, thionine, a phenothiazine dye, was covalently bound to the poly(dicarbazole) backbone as it mediates the reduction of quinoid products and therefore induces an enhancement of the performance of the tyrosinase-based biosensor.

Anti-Bacterial Agents↗

PubMed2001

Elaboration and characterization of spatially controlled assemblies of complementary polyphenol oxidase-alkaline phosphatase activities on electrodes.

The electrooxidation of a biotin pyrrole has allowed the formation of biotinylated polypyrrole films. Gravimetric measurements based on a quartz crystal microbalance demonstrate the efficient coupling of avidin, biotinylated polyphenol oxidase (PPO-B) and avidin-labeled alkaline phosphatase (AP-A) with the underlying biotinylated polymer film. The estimated mass increase corresponds to the anchoring of 1.6-1.8 equivalent layer of proteins. A step-by-step construction of bienzyme multilayers composed of PPO-B and AP-A was carried out on the electrode surface modified by the biotinylated polypyrrole film through avidin-biotin bridges. A spatially controlled distribution of the two enzymes was performed by the formation of one AP-A layer on 1, 5, and 10 PPO-B layers. The resulting bienzyme electrodes were applied to the determination of phenyl phosphate on the basis of amperometric detection of enzymically generated o-quinone at -0.2 V. Their analytical performances were analyzed in relation to the design of the enzyme architectures and in comparison with the amperometric behavior of the monoenzymatic electrodes (PPO-B electrode and AP-A electrode). It appears that at the 10-layer-PPO-B polypyrrole electrode only 4% of phenol is transformed, whereas 42-69% of phenyl phosphate is enzymatically consumed and detected at the AP-A polypyrrole electrode, depending on the enzyme activity. For the bienzymatic AP-A/PPO-B polypyrrole electrodes, the activity of each immobilized enzyme clearly affects the biosensor performance, the main limiting factor being the very low efficiency of PPO-B at pH 8.8.

Alkaline Phosphatase↗

PubMed1999

A biotinylated conducting polypyrrole for the spatially controlled construction of an amperometric biosensor.

A new biotin derivative functionalized by an electropolymerizable pyrrole group has been synthesized. The electrooxidation of this biotin pyrrole has allowed the formation of biotinylated conducting polypyrrole films in organic electrolyte. Gravimetric measurements based on a quartz crystal microbalance, modified by the biotinylated polymer, revealed an avidin-biotin-specific binding at the interface of polymer-solution. The estimated mass increase corresponded to the anchoring of 1.5 avidin monolayers on the polypyrrole surface. In addition, the subsequent grafting of biotinylated glucose oxidase was corroborated by electrochemical permeation studies. Enzyme multilayers composed of glucose oxidase or polyphenol oxidase were elaborated on the electrode surface modified by the biotinylated polypyrrole film. The amperometric response of the resulting biosensors to glucose or catechol has been studied at +0.6 or -0.2 V vs SCE, respectively.

Biosensing Techniques↗

PubMed1999

Biomolecule immobilization on electrode surfaces by entrapment or attachment to electrochemically polymerized films. A review.

The concept and potentialities of electrochemical procedures of biomolecule immobilization based on electropolymerized films are described. The biomolecule entrapment in conventional electrogenerated polymers such as polypyrrole, polyaniline or polyphenol is compared with an electrochemical procedure involving the adsorption of amphiphilic monomers and biomolecules before the polymerization step. Examples of organic phase enzyme electrode and electrical wiring of immobilized enzymes are presented. Furthermore, the construction of controlled architectures based on spatially segregated multilayers, exhibiting complementary biological activities is described. Then, the use of functionalized polymers bearing functional groups for the covalent binding of biomolecules is reported. Moreover, the attachment of biomolecules to biotinylated polymers through affinity interactions based on avidin-biotin bridge is presented.

Biosensing Techniques↗

PubMedDate not supplied

Biosensors based on immobilization of biomolecules by electrogenerated polymer films. New perspectives.

The concept and potentialities of electrochemical procedures of biomolecule immobilization are described. The entrapment of biomolecules within electropolymerized films consists of the application of an appropriate potential to an electrode soaked in an aqueous solution containing monomer and biomolecules. This method of biosensor construction is compared with a two-step procedure based on the adsorption of an aqueous amphiphilic pyrrole monomer-biomolecule mixture on an electrode followed by the electropolymerization of the adsorbed monomers. Another approach is based on the electrogeneration of polymer films functionalized by specific groups allowing subsequently the attachment of biomolecules. The immobilization of biomolecules on these films by covalent binding or noncovalent interactions is described.

Adsorption↗