PubMed Health⌕ Search

Biomedical subjects

S D Tanksley

Publications and source records attributed to S D Tanksley.

At least 73 records · Page 4Linked to original sources

Genetic mapping of tandemly repeated telomeric DNA sequences in tomato (Lycopersicon esculentum).

A telomere-associated tandemly repeated DNA sequence of tomato, TGR I, has been used to map telomeres on the tomato RFLP linkage map. Mapping was performed by monitoring the segregation of entire arrays of TGR I from a segregating F2 population using pulsed-field gel electrophoresis (PFGE). With this strategy, four telomeres have been mapped to the ends of the short arm of chromosomes 9 and 12 and the long arms of chromosomes 5 and 11, using a saturated RFLP map of tomato containing approximately 1000 RFLP markers. In all four cases, the TGR I locus maps to the end of the chromosome, and the distance between the most distal single-copy RFLP marker and the telomeric TGR I locus was between 1.6 and 9.6 cM. This indicates that the region close to the telomeres does not show an excessive rate of recombination compared to other regions of the genome and that the RFLP map of tomato is essentially complete and covers the entire genome for all practical purposes. Additionally, the mapping technique presented here should be generally applicable to the mapping of other tandemly repeated DNA sequences.

Chromosome Mapping↗

High density molecular linkage maps of the tomato and potato genomes.

High density molecular linkage maps, comprised of more than 1000 markers with an average spacing between markers of approximately 1.2 cM (ca. 900 kb), have been constructed for the tomato and potato genomes. As the two maps are based on a common set of probes, it was possible to determine, with a high degree of precision, the breakpoints corresponding to 5 chromosomal inversions that differentiate the tomato and potato genomes. All of the inversions appear to have resulted from single breakpoints at or near the centromeres of the affected chromosomes, the result being the inversion of entire chromosome arms. While the crossing over rate among chromosomes appears to be uniformly distributed with respect to chromosome size, there is tremendous heterogeneity of crossing over within chromosomes. Regions of the map corresponding to centromeres and centromeric heterochromatin, and in some instances telomeres, experience up to 10-fold less recombination than other areas of the genome. Overall, 28% of the mapped loci reside in areas of putatively suppressed recombination. This includes loci corresponding to both random, single copy genomic clones and transcribed genes (detected with cDNA probes). The extreme heterogeneity of crossing over within chromosomes has both practical and evolutionary implications. Currently tomato and potato are among the most thoroughly mapped eukaryotic species and the availability of high density molecular linkage maps should facilitate chromosome walking, quantitative trait mapping, marker-assisted breeding and evolutionary studies in these two important and well studied crop species.

Centromere↗

Isolation of molecular markers from specific chromosomal intervals using DNA pools from existing mapping populations.

We present a general method for isolating molecular markers specific to any region of a chromosome using existing mapping populations. Two pools of DNA from individuals homozygous for opposing alleles for a targeted chromosomal interval, defined by two or more linked RFLP markers, are constructed from members of an existing mapping population. The DNA pools are then screened for polymorphism using random oligonucleotide primers and PCR (1). Polymorphic DNA bands should represent DNA sequences within or adjacent to the selected interval. We tested this method in tomato using two genomic intervals containing genes responsible for regulating pedicle abscission (jointless) and fruit ripening (non-ripening). DNA pools containing 7 to 14 F2 individuals for each interval were screened with 200 random primers. Three polymorphic markers were thus identified, two of which were subsequently shown to be tightly linked to the selected intervals. The third marker mapped to the same chromosome (11) but 45 cM away from the selected interval. A particularly attractive attribute of this method is that a single mapping population can be used to target any interval in the genome. Although this method has been demonstrated in tomato, it should be applicable to any sexually reproducing organism for which segregating populations are being used to construct genetic linkage maps.

Base Sequence↗

Rapid identification of markers linked to a Pseudomonas resistance gene in tomato by using random primers and near-isogenic lines.

An approach to isolating DNA sequences that are linked to important plant genes is described. The strategy is based upon a recent modification of the polymerase chain reaction in which synthetic primers are used to amplify random sequences from genomic DNA. This technique, used in conjunction with near-isogenic lines (which differ only by the presence or absence of the target gene and a small region of surrounding DNA), leads to the rapid identification of sequences linked to the gene of interest. The feasibility of this method has been demonstrated by analyzing a pair of tomato near-isogenic lines that differ for a region on chromosome 5 that contains a gene (Pto) conferring resistance to Pseudomonas syringae pv. tomato. One hundred forty-four random primers were screened on these lines, and seven amplified products were identified that were present in one but not the other line. Of four products that were further investigated, three were confirmed by segregation analysis to be tightly linked to the Pto gene. Linked sequences identified by this method are useful for detecting the presence of the target gene in plant populations (e.g., in plant breeding) and, if very tightly linked, as starting points for a chromosome walk to isolate the gene. Since near-isogenic lines are a typical product of plant breeding and classical genetic studies, this method is applicable to a wide variety of species.

Base Sequence↗

Characterization of the level, target sites and inheritance of cytosine methylation in tomato nuclear DNA.

The tomato nuclear genome was determined to have a G + C content of 37% which is among the lowest reported for any plant species. Non-coding regions have a G + C content even lower (32% average) whereas coding regions are considerably richer in G + C (46%). 5-methyl cytosine was the only modified base detected and on average 23% of the cytosine residues are methylated. Immature tissues and protoplasts have significantly lower levels of cytosine methylation (average 20%) than mature tissues (average 25%). Mature pollen has an intermediate level of methylation (22%). Seeds gave the highest value (27%), suggesting de novo methylation after pollination and during seed development. Based on isoschizomer studies we estimate 55% of the CpG target sites (detected by Msp I/Hpa II) and 85% of the CpNpG target sites (detected by Bst NI/Eco RI) are methylated. Unmethylated target sites (both CpG and CpNpG) are not randomly distributed throughout the genome, but frequently occur in clusters. These clusters resemble CpG islands recently reported in maize and tobacco. The low G + C content and high levels of cytosine methylation in tomato may be due to previous transitions of 5mC----T. This is supported by the fact that G + C levels are lowest in non-coding portions of the genome in which selection is relaxed and thus transitions are more likely to be tolerated. This hypothesis is also supported by the general deficiency of methylation target sites in the tomato genome, especially in non-coding regions. Using methylation isoschizomers and RFLP analysis we have also determined that polymorphism between plants, for cytosine methylation at allelic sites, is common in tomato. Comparing DNA from two tomato species, 20% of the polymorphisms detected by Bst NI/Eco RII could be attributed to differential methylation at the CpNpG target sites. With Msp I/Hpa II, 50% of the polymorphisms were attributable to methylation (CpG and CpNpG sites). Moreover, these polymorphisms were demonstrated to be inherited in a mendelian fashion and to co-segregate with the methylation target site and thus do not represent variation for transacting factors that might be involved in methylation of DNA. The potential role of heritable methylation polymorphism in evolution of gene regulation and in RFLP studies is discussed.

Base Composition↗

Genetic and physical mapping of the patatin genes in potato and tomato.

Genes for the major storage protein of potato, patatin, have been mapped genetically and physically in both the potato and tomato genomes. In potato, all patatin genes detected by the cDNA clone pGM01 map to a single locus at the end of the long arm of chromosome 8. By means of pulsed field gel electrophoresis (PFGE) it was possible further to delimit this locus, containing 10-15 copies of the gene, to a maximum size of 1.4 million base pairs. Hybridizations with class-specific clones suggest that the locus is at least partially divided into domains containing the two major types of patatin genes, class I and II. In tomato, patatin-homologous sequences were found to reside at the orthologous locus at the end of chromosome 8. The approximately three copies in tomato were localized by PFGE to a single fragment of 300 kilobases. Whereas the class II-specific 5' promoter sequences reside in tomato at the same locus as the coding sequences, the single class I-specific copy of the 5' promoter sequences was localized on chromosome 3 with no coding sequence attached to it. A clone from this chromosome 3 locus of tomato was isolated and by restriction fragment length polymorphism mapping it could be further shown that a similar class I-specific sequence also exists on chromosome 3 of potato. As in tomato, this copy on chromosome 3 is not linked to a coding sequence for patatin. The results are discussed with respect to genome evolution and PFGE analysis of complex gene families.

Carboxylic Ester Hydrolases↗

Mendelian factors underlying quantitative traits in tomato: comparison across species, generations, and environments.

As part of ongoing studies regarding the genetic basis of quantitative variation in phenotype, we have determined the chromosomal locations of quantitative trait loci (QTLs) affecting fruit size, soluble solids concentration, and pH, in a cross between the domestic tomato (Lycopersicon esculentum Mill.) and a closely-related wild species, L. cheesmanii. Using a RFLP map of the tomato genome, we compared the inheritance patterns of polymorphisms in 350 F2 individuals with phenotypes scored in three different ways: (1) from the F2 progeny themselves, grown near Davis, California; (2) from F3 families obtained by selfing each F2 individual, grown near Gilroy, California (F3-CA); and (3) from equivalent F3 families grown near Rehovot, Israel (F3-IS). Maximum likelihood methods were used to estimate the approximate chromosomal locations, phenotypic effects (both additive effects and dominance deviations), and gene action of QTLs underlying phenotypic variation in each of these three environments. A total of 29 putative QTLs were detected in the three environments. These QTLs were distributed over 11 of the 12 chromosomes, accounted for 4.7-42.0% of the phenotypic variance in a trait, and showed different types of gene action. Among these 29 QTLs, 4 were detected in all three environments, 10 in two environments, and 15 in only a single environment. The two California environments were most similar, sharing 11/25 (44%) QTLs, while the Israel environment was quite different, sharing 7/20 (35%) and 5/26 (19%) QTLs with the respective California environments. One major goal of QTL mapping is to predict, with maximum accuracy, which individuals will produce progeny showing particular phenotypes. Traditionally, the phenotype of an individual alone has been used to predict the phenotype of its progeny. Our results suggested that, for a trait with low heritability (soluble solids), the phenotype of F3 progeny could be predicted more accurately from the genotype of the F2 parent at QTLs than from the phenotype of the F2 individual. For a trait with intermediate heritability (fruit pH), QTL genotype and observed phenotype were about equally effective at predicting progeny phenotype. For a trait with high heritability (mass per fruit), knowing the QTL genotype of an individual added little if any predictive value, to simply knowing the phenotype. The QTLs mapped in the L. esculentum X L. cheesmanii F2 appear to be at similar locations to many of those mapped in a previous cross with a different wild tomato (L. chmielewskii).(ABSTRACT TRUNCATED AT 400 WORDS)

Biological Evolution↗

Ac transposition from a T-DNA can generate linked and unlinked clusters of insertions in the tomato genome.

We have investigated the distribution of transposed Acs in the tomato genome. Our approach has been to clone the regions flanking the T-DNAs and transposed Acs from two transgenic lines of tomato and place these sequences on the tomato restriction fragment length polymorphism (RFLP) map. The distribution of transposed Acs around the T-DNA and at locations unlinked to the T-DNA indicates that Ac transposes to linked and unlinked sites in tomato as it does in maize. The structure and terminal sequence of these cloned elements shows that Ac remains intact after transposition. We discuss these results and their bearing on gene tagging strategies using Ac and Ds.

Base Sequence↗

Macrostructure of the tomato telomeres.

The macrostructure of the tomato telomeres has been investigated by in situ hybridization, genomic sequencing, and pulsed-field gel electrophoresis. In situ hybridizations with a cloned telomeric sequence from Arabidopsis thaliana indicated that the telomeric repeat of tomato cross-hybridizes with that of Arabidopsis and is located at all telomeres. Bal31 digestion kinetics confirmed that the tomato telomeric repeat represents the outermost DNA sequence of each tomato chromosome. Genomic sequencing of enriched tomato telomeric sequences, using primers derived from the Arabidopsis sequence, revealed that the consensus sequence of the tomato telomeric repeat is TT(T/A)AGGG compared with the Arabidopsis consensus sequence of TTTAGGG. Furthermore, as shown by pulsed-field gel electrophoresis, the telomeric repeat of tomato is separated by not more than a few hundred kilobases from a previously described 162-base pair satellite DNA repeat of tomato (TGR I) at 20 of the 24 telomeres. Together, these sequences are found in the heterochromatic terminal knob observed in pachytene chromosomes. Therefore, these two repeats determine the structure of 20 of the 24 tomato chromosome ends over approximately 2% of the total chromosome length.

Base Sequence↗

Fine mapping of quantitative trait loci using selected overlapping recombinant chromosomes, in an interspecies cross of tomato.

Quantitative trait loci (QTLs) have been mapped to small intervals along the chromosomes of tomato (Lycopersicon esculentum), by a method we call substitution mapping. The size of the interval to which a QTL can be mapped is determined primarily by the number and spacing of previously mapped genetic markers in the region surrounding the QTL. We demonstrate the method using tomato genotypes carrying chromosomal segments from Lycopersicon chmielewskii, a wild relative of tomato with high soluble solids concentration but small fruit and low yield. Different L. chmielewskii chromosomal segments carrying a common restriction fragment length polymorphism were identified, and their regions of overlap determined using all available genetic markers. The effect of these chromosomal segments on soluble solids concentration, fruit mass, yield, and pH, was determined in the field. Many overlapping chromosomal segments had very different phenotypic effects, indicating QTLs affecting the phenotype(s) to lie in intervals of as little as 3 cM by which the segments differed. Some associations between different traits were attributed to close linkage between two or more QTLs, rather than pleiotropic effects of a single QTL: in such cases, recombination should separate desirable QTLs from genes with undesirable effects. The prominence of such trait associations in wide crosses appears partly due to infrequent reciprocal recombination between heterozygous chromosomal segments flanked by homozygous regions. Substitution mapping is particularly applicable to gene introgression from wild to domestic species, and generally useful in narrowing the gap between linkage mapping and physical mapping of QTLs.

Alleles↗

Resolution of quantitative traits into Mendelian factors by using a complete linkage map of restriction fragment length polymorphisms.

The conflict between the Mendelian theory of particulate inheritance and the observation of continuous variation for most traits in nature was resolved in the early 1900s by the concept that quantitative traits can result from segregation of multiple genes, modified by environmental effects. Although pioneering experiments showed that linkage could occasionally be detected to such quantitative trait loci (QTLs), accurate and systematic mapping of QTLs has not been possible because the inheritance of an entire genome could not be studied with genetic markers. The use of restriction fragment length polymorphisms (RFLPs) has made such investigations possible, at least in principle. Here, we report the first use of a complete RFLP linkage map to resolve quantitative traits into discrete Mendelian factors, in an interspecific back-cross of tomato. Applying new analytical methods, we mapped at least six QTLs controlling fruit mass, four QTLs for the concentration of soluble solids and five QTLs for fruit pH. This approach is broadly applicable to the genetic dissection of quantitative inheritance of physiological, morphological and behavioural traits in any higher plant or animal.

Chromosome Mapping↗

Chloroplast DNA sequences integrated into an intron of a tomato nuclear gene.

DNA sequences capable of hybridizing with chloroplast DNA have previously been reported to exist in the nuclear genome of higher plants. Here we show that the third intron of the cultivated tomato (Lycopersicon esculentum) nuclear gene Cab-7, which resides on chromosome 10 and which we recently cloned and sequenced, contains two DNA fragments derived from the coding region of the chloroplast gene psbG. The first fragment, 133 bp long, is located at a site 63 bp from the 3' end of the 833 bp intron. The exact sequence of the 11 nucleotides at the 3' end of the inserting chloroplast sequence is also found at the 5' border of the insertion. A small (107 bp) chloroplast DNA fragment is inserted near the middle of the intron, again with the 3' end of the inserting element (6 bp) duplicated at the 5' border of the insertion. The second insert is a subfragment of the first insert, and is most likely directly derived from it. The psbG insertion sequence was found to be present in the Cab-7 gene of all tomato species examined but not in species from related genera (e.g. Solanum, Petunia, Nicotiana), suggesting that the original transposition event (chloroplast to nucleus) occurred relatively recently--since the divergence of the genus Lycopersicon from other genera in the family Solanaceae, but before radiation of species in that genus.

Base Sequence↗

Conservation of gene repertoire but not gene order in pepper and tomato.

Homologies of tomato and pepper genes have been compared, and genetic linkage maps have been constructed based on a common set of cDNA clones and selected single-copy genomic clones. We report here that the gene repertoire of these two species is highly conserved, yet the linear order of the genes on the chromosomes has been greatly modified. Although the two species share the same number of centromeres, the chromosomal regions around those centromeres have undergone extensive rearrangements. Accompanying the extensive chromosome rearrangement has been a change in locus number for approximately 12% of the loci detected by random cDNA clones. Duplicated loci within each genome are normally found on different chromosomes and are not confined to one species, thus ruling out gene duplication as an explanation for the 4-fold higher DNA content of pepper. At least one of the duplications occurred since the divergence of tomato and pepper from their last common ancestor.

Journal Article↗

Rapid chromosomal assignment of multiple genomic clones in tomato using primary trisomics.

In order to rapidly assign relatively large numbers of tomato genomic clones to specific chromosomes, we have developed the following approach: groups of five to eight clones from a single copy tomato library are pooled, nick-translated, and utilized as probes against Southern blots consisting of a panel of trisomic DNAs. Since the trisomic DNAs are digested with the same enzyme used to produce the genomic library (PstI), each hybridizing band can be related to a specific genomic clone and the relative intensities of the bands can be used to assign each to a specific chromosome. With this technique, we have assigned 52 clones to specific chromosomes and verified the assignment of 21 out of 23 by genetic mapping in a segregating F2 population. In addition to selecting clones according to chromosome, the idea of using multiple clones or "molecular darts" may have broader applications, such as screening for differences between the genomes of nearly isogenic lines.

Chromosome Mapping↗

Evidence for selection as a mechanism in the concerted evolution of Lycopersicon esculentum (tomato) genes encoding the small subunit of ribulose-1,5-bisphosphate carboxylase/oxygenase.

The nuclear gene sequences encoding RBCS, the small subunit of ribulose-1,5-bisphosphate carboxylase/oxygenase (EC 4.1.1.39) from several plants show extensive interspecific divergence but little intraspecific divergence, suggesting that these genes are evolving in concert within a genome. In this study, the nucleotide sequences of two tomato (Lycopersicon esculentum) RBCS genes and a cDNA clone containing the entire coding region of a third tomato RBCS gene were determined. The three genes, designated Rbcs-1, Rbcs-2A, and Rbcs-3A, each belong to a different one of the three RBCS loci in the tomato genome. The nucleotide sequence of Rbcs-1 differs from that of Rbcs-2A and Rbcs-3A by 13.9% and 13.1%, respectively. Rbcs-2A and Rbcs-3A differ from each other by 10.7%. A recently published RBCS gene sequence from tobacco (Nicotiana tabacum) [Mazur, B. J. & Chui, C.-F. (1985) Nucleic Acids Res. 13, 2373-2386] differs by 10.6% and 11.3% from Rbcs-2A and Rbcs-3A, respectively, and by 15.0% from Rbcs-1. Thus the tobacco gene seems to be phylogenetically as closely related to the tomato genes Rbcs-2A and Rbcs-3A as the latter two are to each other, and more closely related to them than Rbcs-1 is. However, the mature part of the polypeptide encoded by the tobacco RBCS gene differs by five and six amino acids from the corresponding region in the polypeptides encoded by Rbcs-2A and Rbcs-3A, respectively, while these two tomato RBCS polypeptides differ from each other in the mature part by a single amino acid. Rbcs-1, whose nucleotide sequence shows higher divergence from both the tobacco RBCS gene and Rbcs-2A and Rbcs-3A, encodes a polypeptide whose mature part differs by eight amino acids from the corresponding region in the tobacco polypeptide but only by three and four amino acids from the corresponding regions of Rbcs-2A- and Rbcs-3A-encoded polypeptides, respectively. Thus, it appears that in the tomato selection has maintained near uniformity of the coding information in the portion of the RBCS genes encoding the mature polypeptides.

Amino Acid Sequence↗

Genetics, subcellular localization, and molecular characterization of 6-phosphogluconate dehydrogenase isozymes in tomato.

Three independent genes are responsible for 6-phosphogluconate dehydrogenase (6PGDH) activity in tomato. 6Pgdh-2, located on chromosome 12, codes for subunits of an active dimer which is restricted to the plastids. 6Pgdh-1, chromosome 4, and 6Pgdh-3, chromosome 5, code for subunits which form three dimers--two homodimers and an intergenic heterodimer. The latter three isozymes are found in the cytosol. 6Pgdh-1, 6Pgdh-2, and 6Pgdh-3 code for subunits with estimated molecular weights of 49,500, 50,500, and 51,200, respectively. The intergenic heterodimer encoded by 6Pgdh-1 and 6Pgdh-3 is thus composed of subunits that differ in length by approximately 15 amino acid residues. Divergence in the length and primary subunit structure may account for the lower thermal stability of the intergenic heterodimer compared with the corresponding homodimers. A limited survey of other solanaceous plant species suggests that the duplication of cytosolic 6PGDH-coding genes found in tomato may be widespread in the family.

Alleles↗

Molecular characterization and genetic mapping of two clusters of genes encoding chlorophyll a/b-binding proteins in Lycopersicon esculentum (tomato).

We have constructed a tomato genomic library in the gamma Charon 4 phage vector. The library was screened with a pea cDNA probe encoding a chlorophyll a/b-binding protein (CAB), and several recombinant phages containing tomato CAB genes were isolated and characterized by restriction mapping, heteroduplex analysis and nucleotide sequencing. Two phages with overlapping segments of the tomato genome contain a total of four CAB genes, all arranged in tandem. A third phase contains three CAB genes, two arranged in tandem and one in opposite orientation, and an additional, truncated CAB gene. Genetic mapping experiments showed that the four CAb genes on the first two phages belong to a locus, previously designated Cab-1, on chromosome 2. The CAB genes from the third phage belong to the Cab-3 locus on chromosome 3. Complete sequence determination of two CAB genes, one from each locus, and additional sequence determination of about 50% of each of the other five CAB genes showed that each gene within a CAB locus is more similar to other CAB genes in the same locus than it is to the CAB genes from the second locus. Furthermore, the polypeptides encoded by Cab-1 genes diverge significantly from those encoded by Cab-3 genes in the domains of transit peptide and the N terminus of the mature polypeptide but are essentially identical in the rest of the sequence.

Amino Acid Sequence↗

Gametophytic self-incompatibility is controlled by a single major locus on chromosome 1 in Lycopersicon peruvianum.

By using a number of previously mapped enzyme-coding genes as genetic markers, it has been possible to scan the genome of Lycopersicon peruvianum for gene(s) controlling the gametophytic self-incompatibility reaction. Regardless of genetic background or level of inbreeding, only a single locus (S), mapping to chromosome 1, was found to control the self-incompatibility reaction. Despite the widespread occurrence of this form of self-incompatibility in higher plants, to the best of our knowledge, the locus underlying the response has not been confirmed previously through genetic mapping, and the results cast doubts on hypotheses requiring multifactoral or dynamic control of gametophytic self-incompatibility.

Journal Article↗