PubMed Health⌕ Search

Biomedical subjects

S E Halford

Publications and source records attributed to S E Halford.

At least 19 recordsLinked to original sources

DNA cleavage reactions by type II restriction enzymes that require two copies of their recognition sites.

Several type II restriction endonucleases interact with two copies of their target sequence before they cleave DNA. Three such enzymes, NgoMIV, Cfr10I and NaeI, were tested on plasmids with one or two copies of their recognition sites, and on catenanes containing two interlinked rings of DNA with one site in each ring. The enzymes showed distinct patterns of behaviour. NgoMIV and NaeI cleaved the plasmid with two sites faster than that with one site and the catenanes at an intermediate rate, while Cfr10I gave similar steady-state rates on all three substrates. Both Cfr10I and NgoMIV converted the majority of the substrates with two sites directly to the products cut at both sites, while NaeI cleaved just one site at a time. All three enzymes thus synapse two DNA sites through three-dimensional space before cleaving DNA. With Cfr10I and NgoMIV, both sites are cleaved in one turnover, in a manner consistent with their tetrameric structures, while the cleavage of a single site by NaeI indicates that the second site acts not as a substrate but as an activator, as reported previously. The complexes spanning two sites have longer lifetimes on catenanes with one site in each ring than on circular DNA with two sites, which indicates that the catenanes have more freedom for site juxtaposition than plasmids with sites in cis.

Bacterial Proteins↗

Analysis of DNA looping interactions by type II restriction enzymes that require two copies of their recognition sites.

Before cleaving DNA substrates with two recognition sites, the Cfr10I, NgoMIV, NaeI and SfiI restriction endonucleases bridge the two sites through 3D space, looping out the intervening DNA. To characterise their looping interactions, the enzymes were added to plasmids with two recognition sites interspersed with two res sites for site-specific recombination by Tn21 resolvase, in buffers that contained either EDTA or CaCl2 so as to preclude DNA cleavage by the endonuclease; the extent to which the res sites were sequestered into separate loops was evaluated from the degree of inhibition of resolvase. With Cfr10I, a looped complex was detected in the presence but not in the absence of Ca(2+); it had a lifetime of about 90 seconds. Neither NgoMIV nor NaeI gave looped complexes of sufficient stability to be detected by this method. In contrast, SfiI with Ca(2+) produced a looped complex that survived for more than seven hours, whereas its looping interaction in EDTA lasts for about four minutes. When resolvase was added to a SfiI binding reaction in EDTA followed immediately by CaCl2, the looped DNA was blocked from recombination while the unlooped DNA underwent recombination. By measuring the distribution between looped and unlooped DNA at various SfiI concentrations, and by fitting the data to a model for DNA binding by a tetrameric protein to two sites in cis, an equilibrium constant for the looping interaction was determined. The equilibrium constant was essentially independent of the length of DNA between the SfiI sites.

Bacterial Proteins↗

SfiI endonuclease activity is strongly influenced by the non-specific sequence in the middle of its recognition site.

The SfiI endonuclease cleaves DNA at the sequence GGCCNNNN NGGCC, where N is any base and downward arrow is the point of cleavage. Proteins that recognise discontinuous sequences in DNA can be affected by the unspecified sequence between the specified base pairs of the target site. To examine whether this applies to SFII, a series of DNA duplexes were made with identical sequences apart from discrete variations in the 5 bp spacer. The rates at which SFII cleaved each duplex were measured under steady-state conditions: the steady-state rates were determined by the DNA cleavage step in the reaction pathway. SFII cleaved some of these substrates at faster rates than other substrates. For example, the change in spacer sequence from AACAA to AAACA caused a 70-fold increase in reaction rate. In general, the extrapolated values for k(cat) and K(m) were both higher on substrates with inflexible spacers than those with flexible structures. The dinucleotide at the site of cleavage was largely immaterial. SFII activity is thus highly dependent on conformational variations in the spacer DNA.

Base Sequence↗

Hopping, jumping and looping by restriction enzymes.

Type II restriction endonucleases recognize specific DNA sequences and cleave both strands of the DNA at fixed locations at or near their recognition sites. Many of these enzymes are dimeric proteins that recognize, in symmetrical fashion, palindromic DNA sequences. They generally catalyse independent reactions at each recognition site on the DNA, although in some cases they act processively; cutting the DNA first at one site, then translocating along the DNA to another site and cutting that before leaving the DNA. The way in which the degree of processivity varies with the length of DNA between the sites can reveal the mechanism of translocation. In contrast with the common view that proteins move along DNA by 'sliding', the principal mode of transfer of the EcoRV endonuclease is by 'hopping' and 'jumping', i.e. the dissociation of the protein from one site followed by its re-association with another site in the same DNA molecule, either close to or distant from the original site. Other type II restriction enzymes require two copies of their recognition sites for their DNA cleavage reactions. Many of these enzymes, such as SfiI, are tetramers with two DNA-binding surfaces. SfiI has no activity when bound to just one recognition site, and instead both DNA-binding surfaces have to be filled before it becomes active. Although the two sites can be on separate DNA molecules, SfiI acts optimally with two sites on the same DNA, where it traps the DNA between the sites in a loop. SfiI thus constitutes a test system for the analysis of DNA looping.

Base Sequence↗

One- and three-dimensional pathways for proteins to reach specific DNA sites.

Proteins that interact with specific DNA sites bind to DNA at random and then translocate to the target site. This may occur by one-dimensional diffusion along the DNA, or through three-dimensional space via multiple dissociation/re-associations. To distinguish these routes, reactions of the ECO:RV endonuclease were studied on substrates with two ECO:RV sites separated by varied distances. The fraction of encounters between the DNA and the protein that resulted in the processive cleavage of both sites decreased as the length of intervening DNA was increased, but not in the manner demanded for one-dimensional diffusion. The variation in processivity with inter-site spacing shows instead that protein moves from one site to another through three-dimensional space, by successive dissociation/re-associations, though each re-association to a new site is followed by a search of the DNA immediately adjacent to that site. Although DNA-binding proteins are usually thought to find their target sites by one-dimensional pathways, three-dimensional routes may be more common than previously anticipated.

DNA↗

Alternative geometries of DNA looping: an analysis using the SfiI endonuclease.

Many processes are governed by proteins that bind to separate sites in DNA and loop out the intervening DNA, but the geometries of the loops have seldom been determined. The SfiI endonuclease cleaves DNA after interacting with two recognition sites, and is a favourable system for the analysis of DNA looping. A gel-shift assay was used here to examine the binding of SfiI to a series of linear DNA molecules containing two SfiI sites separated by 109-170 base-pairs. The complexes in which SfiI trapped a loop by binding to two sites in the same DNA were separated from the complexes containing SfiI bound to separate DNA molecules. Step-wise changes in the inter-site spacing generated two forms of the looped complex with different electrophoretic mobilities. The yields of each looped complex and the complexes from intermolecular synapses all varied cyclically with the inter-site spacing, with similar periodicities ( approximately 10.5 base-pairs) but with different phases. One looped complex predominated whenever the DNA between the sites needed to be underwound in order to produce the correct helical orientation of the binding sites. The other looped complex predominated whenever the intervening DNA needed to be overwound. We conclude that the former has trapped a right-handed loop with a negative node and the latter a left-handed loop with a positive node.

Base Sequence↗

Reactions of BglI and other type II restriction endonucleases with discontinuous recognition sites.

Type II restriction enzymes generally recognize continuous sequences of 4-8 consecutive base pairs on DNA, but some recognize discontinuous sites where the specified sequence is interrupted by a defined length of nonspecific DNA. To date, a mechanism has been established for only one type II endonuclease with a discontinuous site, SfiI at GGCCNNNNNGGCC (where N is any base). In contrast to orthodox enzymes such as EcoRV, dimeric proteins that act at a single site, SfiI is a tetramer that interacts with two sites before cleaving DNA. BglI has a similar recognition sequence (GCCNNNNNGGC) to SfiI but a crystal structure like EcoRV. BglI and several other endonucleases with discontinuous sites were examined to see if they need two sites for their DNA cleavage reactions. The enzymes included some with sites containing lengthy segments of nonspecific DNA, such as XcmI (CCANNNNNNNNNTGG). In all cases, they acted at individual sites. Elongated recognition sites do not necessitate unusual reaction mechanisms. Other experiments on BglI showed that it bound to and cleaved DNA in the same manner as EcoRV, thus further delineating a distinct group of restriction enzymes with similar structures and a common reaction mechanism.

DNA↗

Reactions of type II restriction endonucleases with 8-base pair recognition sites.

Type II restriction endonucleases usually recognize 4-6-base pair (bp) sites on DNA and cleave each site in a separate reaction. A few type II endonucleases have 8-bp recognition sites, but these seem unsuited for restriction, since their sites are rare on most DNA. Moreover, only one endonuclease that recognizes a target containing 8 bp has been examined to date, and this enzyme, SfiI, needs two copies of this site for its DNA cleavage reaction. In this study, several endonucleases with 8-bp sites were tested on plasmids that have either one or two copies of the relevant sequence to determine if they also need two sites. SgfI, SrfI, FseI, PacI, PmeI, Sse8781I, and SdaI all acted through equal and independent reactions at each site. AscI cleaved the DNA with one site at the same rate as that with two sites but acted processively on the latter. In contrast, SgrAI showed a marked preference for the plasmid with two sites and cleaved both sites on this DNA in a concerted manner, like SfiI. Endonucleases that require two copies of an 8-bp sequence may be widespread in nature, where, despite this seemingly inappropriate requirement, they may function in DNA restriction.

Base Pairing↗

Structural analysis of a mutational hot-spot in the EcoRV restriction endonuclease: a catalytic role for a main chain carbonyl group.

Following random mutagenesis of the Eco RV endonuclease, a high proportion of the null mutants carry substitutions at Gln69. Such mutants display reduced rates for the DNA cleavage step in the reaction pathway, yet the crystal structures of wild-type Eco RV fail to explain why Gln69 is crucial for activity. In this study, crystal structures were determined for two mutants of Eco RV, with Leu or Glu at residue 69, bound to specific DNA. The structures of the mutants are similar to the native protein and no function can be ascribed to the side chain of the amino acid at this locus. Instead, the structures of the mutant proteins suggest that the catalytic defect is due to the positioning of the main chain carbonyl group. In the enzyme-substrate complex for Eco RV, the main chain carbonyl of Gln69 makes no interactions with catalytic functions but, in the enzyme-product complex, it coordinates a metal ion bound to the newly liberated 5'-phosphate. This re-positioning may be hindered in the mutant proteins. Molecular dynamics calculations indicate that the metal on the phosphoryl oxygen interacts with the carbonyl group upon forming the pentavalent intermediate during phosphodiester hydrolysis. A main chain carbonyl may thus play a role in catalysis by Eco RV.

Binding Sites↗

Specificity from the synapsis of DNA elements by the Sfi I endonuclease.

The synapsis of DNA sites is a prerequisite for the reactions of many proteins that act at specific DNA sequences. The requirement for synapsis was investigated by analysing the reactions of Sfi I, a tetrameric restriction enzyme that cleaves DNA only after interacting with two recognition sites. In the presence of Mg2+, oligonucleotide duplexes with the cognate recognition sequence were cleaved rapidly, with cooperative kinetics, while non-cognate duplexes were not cleaved. In the absence of Mg2+, the primary complex formed by Sfi I with cognate DNA contained two duplexes synapsed by the tetramer: a secondary complex containing one duplex was seen only at elevated Sfi I concentrations. In contrast, the principal complex with non-cognate DNA contained one duplex bound to Sfi I. Pairs of non-cognate duplexes, or one cognate and one non-cognate duplex, generally failed to form synaptic complexes. On adding Mg2+to complexes with cognate DNA, cleavage occurred much more rapidly in the synaptic complex than in the secondary complex. DNA synapsis thus acts to enhance the specificity of Sfi I for its recognition sequence, by demanding two cognate sites for a catalytically active complex and by excluding non-cognate sites from the synaptic complex.

Catalysis↗

DNA cleavage by the EcoRV restriction endonuclease: roles of divalent metal ions in specificity and catalysis.

The roles of divalent metal ions in DNA cleavage by the EcoRV endonuclease were studied by using Co2+ or Mn2+ as substitutes for the natural cofactor Mg2+. In steady-state experiments with a 12 bp oligonucleotide substrate, Co2+ yielded a similar turnover rate to that with Mg2+, but Mn2+ gave a slower rate. Single turnovers of EcoRV on this substrate were analysed by stopped-flow and quench-flow methods, to determine the rates for the formation of the ternary enzyme-DNA-metal complex, the hydrolysis of the phosphodiester bonds and the dissociation of the cleaved DNA. With Co2+, all three steps had similar rates to those with Mg2+. In contrast, Mn2+ gave a faster rate for phosphodiester hydrolysis than either Mg2+ or Co2+, but a slower rate for product dissociation, thus accounting for its low turnover rate. Single turnovers on plasmids also yielded faster rates for substrate hydrolysis with Mn2+ compared to Mg2+ and Co2+. Since Mn2+ gave the most rapid rates for the hydrolytic step, despite being less electronegative than Co2+, the function of the metal ion at the active site of EcoRV cannot be just the polarisation of the scissile phosphate. Moreover, the minimal scheme for the Co2+-catalysed reaction requires two metal ions for DNA cleavage. The metal ions seem to be involved in the precise positioning of both the substrate and the water that acts as the attacking nucleophile and in activating that water molecule. A model is presented to account for how two metal ions might fulfil these functions.

Allosteric Regulation↗

DNA cleavage by the EcoRV restriction endonuclease: pH dependence and proton transfers in catalysis.

To characterise the pH dependence of phosphodiester hydrolysis by the EcoRV endonuclease in the presence of Mn2+, single turnover reactions on a 12 bp DNA substrate were examined by stopped-flow and quench-flow methods between pH 6.0 and 8.5. At each pH value, the apparent rate constants for phosphodiester hydrolysis increased hyperbolically with the concentration of MnCl2, thus allowing values to be determined for the intrinsic rate constant at saturation with Mn2+ and the equilibrium dissociation constant for Mn2+. The equilibrium constants showed no systematic variation across the pH range tested, while the rate constants increased steeply with increasing pH up to an asymptote above pH 7.5. At low pH conditions, the gradient of a plot of log (rate constant) against pH approached a value of 2. DNA cleavage by EcoRV thus requires the de-protonation of two acidic groups. To determine whether aspartate 36 is one of the groups, mutants of EcoRV were made with other amino acid residues at position 36. Glutamate caused a partial loss of activity, while all other replacements gave near-zero activities. In contrast to wild-type EcoRV, the mutant with glutamate required the de-protonation of only one acidic group for DNA cleavage. A mechanism for EcoRV is proposed in which the water molecule that hydrolyses the phosphodiester bond is de-protonated by two Bronsted bases, probably the ionised forms of aspartate 36 and glutamate 45.

Amino Acid Substitution↗

A new method for determining the stereochemistry of DNA cleavage reactions: application to the SfiI and HpaII restriction endonucleases and to the MuA transposase.

A new method was developed for tracking the stereochemical path of enzymatic cleavage of DNA. DNA with a phosphorothioate of known chirality at the scissile bond is cleaved by the enzyme in H218O. The cleavage produces a DNA molecule with the 5'-[16O,18O, S]-thiophosphoryl group, whose chirality depends on whether the cleavage reaction proceeds by a single-step hydrolysis mechanism or by a two-step mechanism involving a protein-DNA covalent intermediate. To determine this chirality, the cleaved DNA is joined to an oligonucleotide by DNA ligase. Given the strict stereochemistry of the DNA ligase reaction, determined here, the original chirality of the phosphorothioate dictates whether the 18O is retained or lost in the ligation product, which can be determined by mass spectrometry. This method has advantages over previous methods in that it is not restricted to particular DNA sequences, requires substantially less material, and avoids purification of the products at intermediate stages in the procedure. The method was validated by confirming that DNA cleavage by the EcoRI restriction endonuclease causes inversion of configuration at the scissile phosphate. It was then applied to the reactions of the SfiI and HpaII endonucleases and the MuA transposase. In all three cases, DNA cleavage proceeded with inversion of configuration, indicating direct hydrolysis of the phosphodiester bond by water as opposed to a reaction involving a covalent enzyme-DNA intermediate.

5' Untranslated Regions↗

DNA restriction dependent on two recognition sites: activities of the SfiI restriction-modification system in Escherichia coli.

In contrast to many type II restriction enzymes, dimeric proteins that cleave DNA at individual recognition sites 4-6 bp long, the SfiI endonuclease is a tetrameric protein that binds to two copies of an elongated sequence before cutting the DNA at both sites. The mode of action of the SfiI endonuclease thus seems more appropriate for DNA rearrangements than for restriction. To elucidate its biological function, strains of Escherichia coli expressing the SfiI restriction-modification system were transformed with plasmids carrying SfiI sites. The SfiI system often failed to restrict the survival of a plasmid with one SfiI site, but plasmids with two or more sites were restricted efficiently. Plasmids containing methylated SfI sites were not restricted. No rearrangements of the plasmids carrying SfiI sites were detected among the transformants. Hence, provided the target DNA contains at least two recognition sites, SfiI displays all of the hallmarks of a restriction-modification system as opposed to a recombination system in E. coli cells. The properties of the system in vivo match those of the enzyme in vitro. For both restriction in vivo and DNA cleavage in vitro, SfiI operates best with two recognition sites on the same DNA.

Base Sequence↗

DNA excision by the Sfi I restriction endonuclease.

A mechanism for the precise excision of DNA between two target sites was elucidated by analysing the individual steps during the reactions of the SfiI endonuclease on a plasmid with two SfiI sites. Previous studies had indicated that SfiI is a tetrameric protein that binds to two copies of its recognition site before cleaving both sites in both strands. In this study, the concerted cleavage of four phosphodiester bonds was shown to arise from four consecutive reactions that had similar values for their intrinsic rate constants. Each reaction is presumably mediated by one of the four active sites in the tetramer and all four were generally completed within the life-time of the complex between the protein and two recognition sites, though products cleaved in one or two phosphodiester bonds were also detected following premature dissociation of the enzyme-substrate complex at elevated temperatures. At the physiological temperature for this enzyme, all four bonds were cleaved within one minute but the subsequent dissociation of the enzyme-product complex, liberating the excised segment of DNA, took about one hour. The tetrameric structure for SfiI was confirmed by equilibrium centrifugation.

Binding Sites↗