Biomedical subjects

S F El-Amin

Publications and source records attributed to S F El-Amin.

7 recordsLinked to original sources

PubMed2004

Tissue-engineered bone formation in vivo using a novel sintered polymeric microsphere matrix.

We have evaluated in vivo a novel, polymer-based, matrix for tissue engineering of bone. A segmental defect of 15 mm was created in the ulna of New Zealand white rabbits to determine the regenerative properties of a porous polylactide-co-glycolide matrix alone and in combination with autogenous marrow and/or the osteoinductive protein, BMP-7. In this study four implant groups were used: 1) matrix alone; 2) matrix with autogenous marrow; 3) matrix with 20 microg of BMP-7; and 4) matrix with 20 microg of BMP-7 and autogenous marrow. The results showed that the degree of bone formation was dependent on the properties of the graft material. The osteoconductive sintered matrix structure showed significant formation of bone at the implant-bone interface. The addition of autogenous marrow increased the penetration of new bone further into the central area of the matrix and also increased the degree of revascularisation. The osteoinductive growth factor BMP-7 induced penetration of new bone throughout the entire structure of the implant. The most effective treatment was with the combination of marrow cells and osteoinductive BMP-7.

Animals↗

PubMed2003

Structural and human cellular assessment of a novel microsphere-based tissue engineered scaffold for bone repair.

The limitations of current grafting materials have driven the search for synthetic alternatives for the regeneration of trabecular bone. A variety of biodegradable polymer foams composed of 85/15 poly(lactide-co-glycolide) (PLAGA) have been evaluated for such uses. However, structural limitations may restrict the clinical use of these scaffolds. We have developed a novel sintered microsphere scaffold with a biomimetic pore system equivalent to the structure of trabecular bone. By modifying processing parameters, several different sintered microsphere structures were fabricated. Optimization of the structure dealt with modifications to sphere diameter and heating time. Compressive testing illustrated a trend between microsphere diameter and modulus, where increased microsphere diameter resulted in decreased modulus. In addition, evaluation of the pore system showed a positive correlation between sphere diameter and pore diameter. Mercury porosimetry showed increased median pore size with an increased microsphere diameter. Heating time modifications showed that compressive modulus was dependent on the period of heating with longer heating times resulting in higher moduli. It was also shown that heating time did not affect the pore structure. Analysis of the structural data indicated that the microsphere matrix sintered for 4h at a temperature of 160 degrees C with a microsphere diameter of 600-710 microm resulted in an optimal, biomimetic structure with range in pore diameter of 83-300 microm, a median pore size of 210 microm, 35% porosity, and a compressive modulus of 232 MPa. An in vitro evaluation of human osteoblasts seeded onto the sintered matrix indicated that the structure was capable of supporting the attachment and proliferation of cells throughout its pore system. Immunofluorescent staining of actin showed that the cells were proliferating three-dimensionally through the pore system. The stain for osteocalcin was used and showed that cells maintained phenotypic expression for this bone specific protein. Through this work, it was shown that an osteoconductive PLAGA scaffold with a pore system used as a reverse template to the structure of trabecular bone could be fabricated through the sintered microsphere method.

Actins↗

PubMed2003

Extracellular matrix production by human osteoblasts cultured on biodegradable polymers applicable for tissue engineering.

The nature of the extracellular matrix (ECM) is crucial in regulating cell functions via cell-matrix interactions, cytoskeletal organization, and integrin-mediated signaling. In bone, the ECM is composed of proteins such as collagen (CO), fibronectin (FN), laminin (LM), vitronectin (VN), osteopontin (OP) and osteonectin (ON). For bone tissue engineering, the ECM should also be considered in terms of its function in mediating cell adhesion to biomaterials. This study examined ECM production, cytoskeletal organization, and adhesion of primary human osteoblastic cells on biodegradable matrices applicable for tissue engineering, namely polylactic-co-glycolic acid 50:50 (PLAGA) and polylactic acid (PLA). We hypothesized that the osteocompatible, biodegradable polymer surfaces promote the production of bone-specific ECM proteins in a manner dependent on polymer composition. We first examined whether the PLAGA and PLA matrices could support human osteoblastic cell growth by measuring cell adhesion at 3, 6 and 12h post-plating. Adhesion on PLAGA was consistently higher than on PLA throughout the duration of the experiment, and comparable to tissue culture polystyrene (TCPS). ECM components, including CO, FN, LM, ON, OP and VN, produced on the surface of the polymers were quantified by ELISA and localized by immunofluorescence staining. All of these proteins were present at significantly higher levels on PLAGA compared to PLA or TCPS surfaces. On PLAGA, OP and ON were the most abundant ECM components, followed by CO, FN, VN and LN. Immunofluorescence revealed an extracellular distribution for CO and FN, whereas OP and ON were found both intracellularly as well as extracellularly on the polymer. In addition, the actin cytoskeletal network was more extensive in osteoblasts cultured on PLAGA than on PLA or TCPS. In summary, we found that osteoblasts plated on PLAGA adhered better to the substrate, produced higher levels of ECM molecules, and showed greater cytoskeletal organization than on PLA and TCPS. We propose that this difference in ECM composition is functionally related to the enhanced cell adhesion observed on PLAGA. There is initial evidence that specific composition of the PLAGA polymer favors the ECM. Future studies will seek to optimize ECM production on these matrices for bone tissue engineering applications.

Biodegradation, Environmental↗

PubMed1998

Preliminary in vivo report on the osteocompatibility of poly(anhydride-co-imides) evaluated in a tibial model.

A novel class of polymers with mechanical properties similar to cancellous bone are being investigated for their ability to be used in weight-bearing areas for orthopedic applications. The poly(anhydride-co-imide) polymers based on poly[trimellitylimidoglycine-co-1,6-bis(carboxyphenoxy)hexan e] (TMA-Gly:CPH) and poly[pyromellitylimidoalanine-co-1,6-bis(carboxyphenoxy)hexa ne] (PMA-Ala:CPH) in molar ratios of 30:70 were investigated for osteocompatibility, with effects on the healing of unicortical 3-mm defects in rat tibias examined over a 30-day period. Defects were made with surgical drill bits (3-mm diameter) and sites were filled with poly(anhydride-co-imide) matrices and compared to the control poly(lactic acid-glycolic acid) (PLAGA) (50:50), a well-characterized matrix frequently used in bone regeneration studies, and defects without polymeric implants. At predetermined time intervals (3, 6, 9, 12, 20, and 30 days), animals were sacrificed and tissue histology was examined for bone formation, polymer-tissue interaction, and local tissue response by light microscopy. The studies revealed that matrices of TMA-Gly:CPH and PMA-Ala:CPH produced responses similar to the control PLAGA with tissue compatibility characterized by a mild response involving neutrophils, macrophages, and giant cells throughout the experiment for all matrices studied. Matrices of PLAGA were nearly completely degraded by 21 days in contrast to matrices of TMA-Gly:CPH and PMA-Ala:CPH that displayed slow erosion characteristics and maintenance of shape. Defects in control rats without polymer healed by day 12, defects containing PLAGA healed after 20 days, and defects containing poly(anhydride-co-imide) matrices produced endosteal bone growth as early as day 3 and formed bridges of cortical bone around matrices by 30 days. In addition, there was marrow reconstitution at the defect site for all matrices studied along with matured bone-forming cells. This study suggests that novel poly(anhydride-co-imides) are promising polymers that may be suitable for use as implants in bone surgery, especially in weight-bearing areas.

Animals↗

PubMed1998

Poly(anhydride-co-imides): in vivo biocompatibility in a rat model.

The degradation and tissue compatibility characteristics of a novel class of biodegradable poly(anhydride-co-imide) polymers: poly[trimellitylimidoglycine-co-1,6-bis(carboxyphenoxy)hexan e] (TMA-gly: CPH) (in 10:90; 30:70 and 50: 50 molar ratios) and poly[pyromellitylimidoalanine-co-1,6-bis(carboxyphenoxy)hexa ne] (PMA-ala:CPH) (in 10:90 and 30:70 molar ratios) were investigated and compared with control poly(lactic acid/glycolic acid) (PLAGA in 50:50 molar ratio) matrices, a well-characterized biocompatible polymer, in rat subcutaneous tissues for 60 days. Polymers were compression-molded into circular discs of 14 mm x 1 mm in diameter. On post-operative days 7, 14, 28 and 60, histological tissue samples were removed, prepared by fixation and staining, and analyzed by light microscopy. PLAGA matrices produced mild inflammatory reactions and were completely degraded at the end of 60 days, leaving implant tissues that were similar to surgical wounds without implants. TMA-gly:CPH (10:90 and 30:70) matrices produced mild inflammatory reactions by the end of 60 days, similar to those seen with PLAGA. TMA-gly: CPH (50: 50) produced moderate inflammatory reactions characterized by macrophages and edema. PMA-ala:CPH matrices elicited minimal inflammatory reactions that were characterized by fibrous encapsulation by the end of 60 days. In vivo degradation rates of poly(anhydride-co-imides) were similar to PLAGA. Both PMA-ala:CPH and TMA-gly: CPH matrices maintained their shapes and degraded at a constant rate over the period of two months. These polymers, possessing good mechanical properties and tissue compatibility, may be useful in weight-bearing applications in bone.

Acute-Phase Reaction↗

PubMed1997

Novel polyphosphazene/poly(lactide-co-glycolide) blends: miscibility and degradation studies.

A novel biodegradable polymer blend was developed for potential biomedical applications. A 50:50 poly(lactide-co-glycolide) (PLAGA) was blended in a 50:50 ratio with the followiing polyphosphazenes (PPHOS): poly[(25% ethyl glycinato)(75% p-methylphenoxy)phosphazene[, poly[(50% ethyl glycinato)(50% p-methylphenoxy)phosphazene], and poly[(75% ethyl glycinato)(25% p-methylphenoxy)phosphazene] to obtain Blends A, B, and C, respectively, using a mutual solvent technique. The miscibility of these blends was determined by measuring their glass transition temperature (Tg) using differential scanning calorimetry. After fabrication using a casting technique, the degradation of the matrices was examined. Differential scanning calorimetry showed one glass transition temperature for each blend which was between the Tg's of their respective parent polymers indicating miscibility of the blends. Surface analysis by scanning electron microscopy showed the matrices to have smooth uniform surfaces. Degradation studies showed near-zero order degradation kinetics for the blends with Blends A and B losing 10% of their mass after two weeks and Blend C degrading more rapidly (30% mass loss during the same period). These findings suggest that these novel biodegradable PLAGA/PPHOS blends may be useful for biomedical purposes.

Biocompatible Materials↗

PubMed1996

A highly porous 3-dimensional polyphosphazene polymer matrix for skeletal tissue regeneration.

Current methods for the replacement of skeletal tissue in general involve the use of autografts or allografts. There are considerable drawbacks in the use of either of these tissues. In an effort to provide an alternative to traditional graft materials, a degradable 3-dimensional (3-D) osteoblast cell-polymer matrix was designed as a construct for skeletal tissue regeneration. A degradable amino acid containing polymer, poly[(methylphenoxy)(ethyl glycinato) phosphazene], was synthesized and a 3-D matrix system was prepared using a salt leaching technique. This 3-D polyphosphazene polymer matrix system, 3-D-PHOS, was then seeded with osteoblast cells for the creation of a cell-polymer matrix material. The 3-D-PHOS matrix possessed an average pore diameter of 165 microns. Environmental scanning electron microscopy revealed a reconnecting porous network throughout the polymer with an even distribution of pores over the surface of the matrix. Osteoblast cells were found attached and grew on the 3-D-PHOS at a steady rate throughout the 21-day period studied in vitro, in contrast to osteoblast growth kinetics on similar, but 2-D polyphosphazene matrices, that showed a decline in cell growth after 7 days. Characterization of 3-D-PHOS osteoblastpolymer matrices by light microscopy revealed cells growing within the pores as well as on surface of the polymer as early as day 1. This novel porous 3-D-PHOS matrix may be suitable for use as a bioerodible scaffold for regeneration of skeletal tissue.

Animals↗