PubMed Health⌕ Search

Biomedical subjects

S Furusaki

Publications and source records attributed to S Furusaki.

34 records · Page 2Linked to original sources
PubMed1991

Adsorption and elution of bovine gamma-globulin using an affinity membrane containing hydrophobic amino acids as ligands.

A hollow-fibre affinity membrane containing hydrophobic amino acids as ligands was prepared by the radiation-induced grafting of glycidyl methacrylate onto a porous polyethylene hollow fibre and subsequent phenylalanine (Phe) or tryptophan (Trp). The densities of the Phe and Trp ligand of the resulting affinity membrane were 0.4 and 0.4 mol/kg, respectively. The Trp-containing affinity membrane exhibited a higher amount of adsorbed bovine gamma-globulin (BGG) than the Phe-containing membrane. To evaluate the adsorption behaviour of the membrane, the BGG-containing buffer solution was permeated from the inside to the outside of the Trp-containing hollow-fibre affinity membrane through the ligand-immobilized pores. The breakthrough curves as a function of effluent volume coincided irrespective of the flow-rate, i.e. the residence time (55-220 s) of the solution across the membrane (thickness 0.83 mm), as a result of negligible mass transfer resistance. A series of chromatographic procedures, (adsorption-washing-elution) was repeated twice and a satisfactory quantitative elution was attained. The reproducible profile of the flux and the protein concentration assured a quantitative cycle of chromatography using the affinity membrane containing Trp as a ligand.

Animals↗
PubMed1991

Membrane bioreactors: present and prospects.

Membrane bioreactors have a very handy in-situ separation capability lacking in other types of bioreactors. Combining various functions of membrane separations and biocatalyst characteristics of enzymes, microbial cells, organelles, animal and plant tissues can generate quite a number of membrane bioreactor systems. The cell retaining property of membranes and selective removal of inhibitory byproducts makes high cell density culture possible and utilizes enzyme catalytic activity better, which leads to high productivity of bioreactors. Enzyme reactions utilizing cofactors and hydrolysis of macromolecules are advantageous in membrane bioreactors. Anaerobic cell culture may be efficiently carried out in membrane cell recycle systems, while aerobic cultures work well in dual hollow fiber reactors. Animal and plant cells have much a better chance of success in membrane reactors because of the protective environment of the reactor and the small oxygen uptake rate of these cells. Industrial use of these reactors are still in its infancy and limited to enzyme and animal tissue culture, but applications will expand as existing problems are resolved.

Animals↗
PubMedDate not supplied

Characterization and catalytic property of surfactant-laccase complex in organic media.

The oxidation of o-phenylenediamine catalyzed in anhydrous organic solvents by surfactant-laccase complex was investigated. The complex was prepared by utilizing a novel preparation technique in water-in-oil (W/O) emulsions. The surfactant-laccase complex effectively catalyzed the oxidation reaction in various dry organic solvents, while laccase, lyophilized from an aqueous buffer solution in which its activity was optimized, exhibited no catalytic activity in nonaqueous media. To optimize the preparation and reaction conditions for the surfactant-enzyme complexes, we examined the effects of pH in the water pool of W/O emulsions, the concentration of enzyme and surfactant at the preparation stage, and the nature of organic solvents at the reaction stage on the laccase activity in organic media. Surfactant-laccase complex showed a strong pH-dependent catalytic activity in organic media. Its optimum activity was obtained when the complex was prepared at a pH of about 3. Interestingly, native laccase in an aqueous buffer solution exhibited an optimum activity at the same pH of 3. The optimum preparation conditions of surfactant-laccase complex were [laccase] = 0.8 mg/mL and [surfactant] = 10 mM, and the complex showed the highest catalytic activity in toluene among nine anhydrous organic solvents. The effect of a cosolubilized mediator (1-hydroxybenzotriazole (HBT)) on the reaction was also investigated. The addition of HBT at the preparation stage of the enzyme complex did not accelerate the catalytic reaction because HBT was converted to an inactive benzotriazole (BT) by laccase. However, the addition of HBT at the reaction stage enhanced the catalytic performance by a factor of five compared to that without HBT.

Catalysis↗
PubMedDate not supplied

Important parameters affecting efficiency of protein refolding by reversed micelles.

Refolding of denatured RNase A as a model of inclusion bodies was performed by reversed micelles formulated with sodium di-2-ethylhexyl sulfosuccinate (AOT) in isooctane. In the novel refolding process, a solid-liquid extraction was utilized as an alternative to the ordinary protein extraction by reversed micelles based on a liquid-liquid extraction. First, the effects of operational parameters such as concentration of AOT, W(o) (= [H(2)O]/[AOT]), and pH were examined on the solubilization of solid denatured proteins into a reversed micellar solution. The solubilization was facilitated by a high AOT concentration, a high W(o) value, and a high pH in water pools. These conditions are favorable for the dispersion of the solid protein aggregates in an organic solvent. Second, the renaturation of the denatured RNase A solubilized into the reversed micellar solution was conducted by addition of glutathione as a redox reagent. A complete renaturation of RNase A was accomplished by adjusting the composition of the redox reagent even at a high protein concentration in which protein aggregation would usually occur in aqueous media. In addition, the renaturation rates were improved by optimizing water content (W(o)) and the pH of water pools in reversed micelles. Finally, the recovery of renatured RNase A from the reversed micellar solution was performed by adding a polar organic solvent such as acetone into the reversed micellar solution. This precipitation method was effective for recovering proteins from reversed micellar media without any significant reduction in enzymatic activity.

Animals↗
PubMedDate not supplied

Adsorption characteristics of an immobilized metal affinity membrane.

An immobilized metal affinity (IMA) hollow-fiber membrane was prepared by radiation-induced graft polymerization of glycidyl methacrylate (GMA) onto a porous polyethylene hollow fiber, followed by chemical conversion of the produced epoxide group into an iminodiacetate (IDA) group and its chelation with copper(II) ion. The IDA hollow fiber, whose degree of GMA grafting was 120%, was found to retain 0.42 mol of Cu ion/kg of dry weight of the resulting IMA hollow fiber. The pure water flux of the affinity membrane was 0.90 m/h at a filtration pressure of 1 x 10(5) Pa. The 0.1 g/L L-histidyl-L-leucine (His-Leu) solution permeated across the IMA hollow fiber, whose inner diameter and thickness were 0.78 and 0.365 mm, respectively, at a prescribed filtration pressure ranging from 0.2 x 10(5) to 1.0 x 10(5) Pa. The adsorption of His-Leu during permeation of the solution showed that the overall adsorption rate was independent of the filtration pressure, i.e., the residence time, because of the negligible diffusional resistance of His-Leu to the pseudobioaffinity ligand located on the pore surface of the membrane. No deterioration in the adsorption capacity was observed after five cycles of His-Leu adsorption, its elution, and reimmobilization of copper. The adsorption isotherm of bovine serum albumin (BSA) on the IMA hollow fiber was measured and compared with that for the conventional agarose-based bead containing the IDA-Cu ligand.(ABSTRACT TRUNCATED AT 250 WORDS)

Adsorption↗
PubMedDate not supplied

Ion exchange of lysozyme during permeation across a microporous sulfopropyl-group-containing hollow fiber.

A microporous hollow fiber containing a sulfopropyl (SP) group as a strongly acidic cation-exchange group was prepared by radiation-induced graft polymerization of glycidyl methacrylate, followed by hydrolysis of the resulting epoxide group into a diol, and then conversion of the diol into the SP group. The SP group density of the resulting hollow fiber ranged from 0.21 to 0.84 mol/kg of dry fiber with a pure water flux of 2.7 m/h at a filtration pressure of 0.1 MPa. Lysozyme adsorption was examined during permeation of the lysozyme solution (pH 6) through the pores across a microporous cation-exchange hollow fiber. The lysozyme concentration of the effluent penetrating the outside of the hollow fiber did not change irrespective of the residence time of the solution across the hollow fiber, which was indicative of the negligible diffusional resistance of lysozyme to the SP group. The binding capacity of lysozyme to the fiber was constant in this range of SP group density. For comparison, the adsorption characteristics of a cupric chloride solution during permeation were also determined. The binding capacity of Cu to the fiber increased linearly with increasing SP group density, because cupric ions of a smaller size than lysozyme can invade the depths of the grafted polymer branches formed in the amorphous domain of the polymer matrix.

Adsorption↗
PubMedDate not supplied

Binding of lysozyme onto a cation-exchange microporous membrane containing tentacle-type grafted polymer branches.

Ion-exchange adsorption of lysozyme to the sulfonic acid (SO3H) group on polymer chains grafted onto microporous polyethylene hollow-fiber membranes was examined. The lysozyme solution was forced to permeate across the hollow fiber. Diversely anchored SO3H groups, i.e., SP and SS groups, were introduced into the membrane by reaction of the glycidyl methacrylate-grafted membrane with propanesultone and sodium sulfite, respectively. The resulting SP and SS group-containing membranes, designated as SP-T and SS-T fibers, respectively, had 95 and 77% water flux of the original membrane, respectively. The binding capacity of lysozyme as a function of the SO3H group density was compared between the SP-T and SS-T fibers from measurement of the ion-exchange breakthrough curves during the permeation of lysozyme solution across the SP-T and SS-T fibers. The binding capacity of lysozyme to the SP-T fiber remained constant, independent of the SP group density, whereas that to the SS-T fiber increased linearly with increasing SS group density. This difference was explained by means of a model whereby lysozyme adheres onto the SP group-containing grafted polymer branches, while the SS group-containing grafted polymer branches hold lysozyme in a tentacle-like manner.

Cation Exchange Resins↗
PubMedDate not supplied

Reduction of nonselective adsorption of proteins by hydrophilization of microfiltration membranes by radiation-induced grafting.

Alcoholic hydroxyl groups were introduced into a polyethylene microfiltration (MF) membrane by radiation-induced graft polymerization of 2-hydroxyethyl methacrylate (HEMA), vinyl acetate (VAc), and glycidyl methacrylate (GMA). Subsequently, the VAc- and GMA-grafted membranes were quantitatively hydrolyzed into monool (single hydroxyl) and diol groups, respectively. The pure water flux of the modified membrane and the saturation capacity of bovine gamma-globulin onto the membrane were determined as a function of alcoholic hydroxyl group density. The threshold value for hydrophilization ranged between 5 and 7 mol of alcoholic hydroxyl group per kilogram of original MF membrane. Masking of the polyethylene surface with grafted polymer branches containing the diol groups was effective because approximately 70% of the pure water flux of the original MF membrane was maintained. Irrespective of the pore diameter of the original MF membrane, saturation capacities on the modified membrane correlated well with the diol group density. Saturation capacities of bovine gamma-globulin and bovine serum albumin were reduced to 1 mg/m2 of the membrane. In addition, the binding interaction changed from irreversible to reversible.

Adsorption↗
PubMedDate not supplied

Mathematical model for analysis of mass transfer for immobilized cells in lactic acid fermentation.

A new mathematical model is proposed to analyze the mass transfer behavior in lactic acid fermentation using immobilized cells entrapped in calcium alginate. The model is comprised of material balance equations for glucose, free lactic acid, and several ions. The dissociation rate of lactic acid (rdiss) is involved in the proposed equations. To solve the equations numerically, a modified calculating method is proposed. Through model analysis, the possible mass transfer behavior in the gel bead was discussed. The model is validated by comparisons with the experimental results obtained from batch and continuous fermentation. The simulations using the model were made to investigate the mass transfer limitation in the gel beads. The results showed that the cell density gradient was formed in the gel beads and it was caused by the accumulation of the inhibitory product (free lactic acid), not by substrate starvation. Moreover, unusual mass transfer behavior of lactate ion in the immobilization support was pointed out.

Biotechnology↗