Biomedical subjects

S Gourinath

Publications and source records attributed to S Gourinath.

13 recordsLinked to original sources

PubMed2005

Crystallization and preliminary crystallographic analysis of calcium-binding protein-2 from Entamoeba histolytica and its complexes with strontium and the IQ1 motif of myosin V.

Calcium plays a pivotal role in the pathogenesis of amoebiasis, a major disease caused by Entamoeba histolytica. Two domains with four canonical EF-hand-containing calcium-binding proteins (CaBPs) have been identified from E. histolytica. Even though they have very high sequence similarity, these bind to different target proteins in a Ca2+-dependent manner, leading to different functional pathways. Calcium-binding protein-2 (EhCaBP2) crystals were grown using MPD as a precipitant. The crystals belong to space group P2(1), with unit-cell parameters a = 111.74, b = 68.83, c = 113.25 A, beta = 116.7 degrees. EhCaBP2 also crystallized in complex with strontium (replacing calcium) at similar conditions. The crystals belong to space group P2(1), with unit-cell parameters a = 69.18, b = 112.03, c = 93.42 A, beta = 92.8 degrees. Preliminary data for EhCaBP2 crystals in complex with an IQ motif are also reported. This complex was crystallized with MPD and ethanol as precipitating agents. These crystals belong to space group P2(1), with unit-cell parameters a = 60.5, b = 69.86, c = 86.5 A, beta = 97.9 degrees.

Amino Acid Motifs↗

PubMed2005

Crystal structure of a carbohydrate induced homodimer of phospholipase A2 from Bungarus caeruleus at 2.1A resolution.

This is the first crystal structure of a carbohydrate induced dimer of phospholipase A(2) (PLA(2)). This is an endogenous complex formed between two PLA(2) molecules and two mannoses. It was isolated from Krait venom (Bungarus caeruleus) and crystallized as such. The complete amino acid sequence of PLA(2) was determined using cDNA method. Three-dimensional structure of the complex has been solved with molecular replacement method and refined to a final R-factor of 0.192 for all the data in the resolution range 20.0-2.1A. The presence of mannose molecules in the protein crystals was confirmed using dinitrosalicylic acid test and the molecular weight of the dimer was verified with MALDI-TOF. As indicated by dynamic light scattering and analytical ultracentrifugation the dimer was also stable in solution. The good quality non-protein electron density at the interface of two PLA(2) molecules enabled us to model two mannoses. The mannoses are involved extensively in interactions with protein atoms of both PLA(2) molecules. Some of the critical amino acid residues such as Asp 49 and Tyr 31, which are part of the substrate-binding site, are found facing the interface and interacting with mannoses. The structure of the complex clearly shows that the dimerization is caused by mannoses and it results in the loss of enzymatic activity.

Amino Acid Sequence↗

PubMed2004

Sequence-induced trimerization of phospholipase A2: structure of a trimeric isoform of PLA2 from common krait (Bungarus caeruleus) at 2.5 A resolution.

The venom of the common Indian krait (Bungarus caeruleus) contains about a dozen isoforms of phospholipase A2 (PLA2), which exist in different oligomeric forms as well as in complexes with low-molecular-weight ligands. The basic objective of multimerization and complexation is either to inactivate PLA2 in the venom for long-term storage, to generate a new PLA2 function or to make a more lethal assembly. The current isoform was isolated from the venom of B. caeruleus. Dynamic light-scattering studies indicated the presence of a stable trimeric association of this PLA2. Its primary sequence was determined by cDNA cloning. The purified protein was crystallized with 2.8 M NaCl as a precipitating agent using the sitting-drop vapour-diffusion method. The crystals belonged to the monoclinic space group C2, with unit-cell parameters a = 80.9, b = 80.5, c = 57.1 A, beta = 90.3 degrees. The structure was refined to a final R factor of 0.198. This is a novel trimeric PLA2 structure in which the central pore formed by the association of three molecules is filled with water molecules. The interactions across the pore take place via multiple water bridges primarily to the side chains of Arg, Lys and Thr residues. Approximately 12% of the total solvent-accessible surface area is buried in the core of the trimer. The active sites of all three molecules are located on the surface and are fully exposed to the solvent, resulting in a highly potent enzymatic unit.

Amino Acid Sequence↗

PubMed2004

Myosin subfragment 1 structures reveal a partially bound nucleotide and a complex salt bridge that helps couple nucleotide and actin binding.

Structural studies of myosin have indicated some of the conformational changes that occur in this protein during the contractile cycle, and we have now observed a conformational change in a bound nucleotide as well. The 3.1-A x-ray structure of the scallop myosin head domain (subfragment 1) in the ADP-bound near-rigor state (lever arm =45 degrees to the helical actin axis) shows the diphosphate moiety positioned on the surface of the nucleotide-binding pocket, rather than deep within it as had been observed previously. This conformation strongly suggests a specific mode of entry and exit of the nucleotide from the nucleotide-binding pocket through the so-called "front door." In addition, using a variety of scallop structures, including a relatively high-resolution 2.75-A nucleotide-free near-rigor structure, we have identified a conserved complex salt bridge connecting the 50-kDa upper and N-terminal subdomains. This salt bridge is present only in crystal structures of muscle myosin isoforms that exhibit a strong reciprocal relationship (also known as coupling) between actin and nucleotide affinity.

Actins↗

PubMed2003

Crystal structure of scallop Myosin s1 in the pre-power stroke state to 2.6 a resolution: flexibility and function in the head.

We have extended the X-ray structure determination of the complete scallop myosin head in the pre-power stroke state to 2.6 A resolution, allowing an atomic comparison of the three major (weak actin binding) states of various myosins. We can now account for conformational differences observed in crystal structures in the so-called "pliant region" at the motor domain-lever arm junction between scallop and vertebrate smooth muscle myosins. A hinge, which may contribute to the compliance of the myosin crossbridge, has also been identified for the first time within the regulatory light-chain domain of the lever arm. Analysis of temperature factors of key joints of the motor domain, especially the SH1 helix, provides crystallographic evidence for the existence of the "internally uncoupled" state in diverse isoforms. The agreement between structural and solution studies reinforces the view that the unwinding of the SH1 helix is a part of the cross-bridge cycle in many myosins.

Actins↗

PubMed2002

Crystallographic findings on the internally uncoupled and near-rigor states of myosin: further insights into the mechanics of the motor.

Here we report a 2.3-A crystal structure of scallop myosin S1 complexed with ADP.BeF(x), as well as three additional structures (at 2.8-3.8 A resolution) for this S1 complexed with ATP analogs, some of which are cross-linked by para-phenyl dimaleimide, a short intramolecular cross-linker. In all cases, the complexes are characterized by an unwound SH1 helix first seen in an unusual 2.5-A scallop myosin-MgADP structure and described as corresponding to a previously unrecognized actin-detached internally uncoupled state. The unwinding of the SH1 helix effectively uncouples the converter/lever arm module from the motor and allows cross-linking by para-phenyl dimaleimide, which has been shown to occur only in weak actin-binding states of the molecule. Mutations near the metastable SH1 helix that disable the motor can be accounted for by viewing this structural element as a clutch controlling the transmission of torque to the lever arm. We have also determined a 3.2-A nucleotide-free structure of scallop myosin S1, which suggests that in the near-rigor state there are two conformations in the switch I loop, depending on whether nucleotide is present. Analysis of the subdomain motions in the weak actin-binding states revealed by x-ray crystallography, together with recent electron microscopic results, clarify the mechanical roles of the parts of the motor in the course of the contractile cycle and suggest how strong binding to actin triggers both the power stroke and product release.

Adenosine Diphosphate↗

PubMed2001

Substrate-inhibitor interactions in the kinetics of alpha-amylase inhibition by ragi alpha-amylase/trypsin inhibitor (RATI) and its various N-terminal fragments.

The ragi alpha-amylase/trypsin bifunctional inhibitor (RATI) from Indian finger millet, Ragi (Eleucine coracana Gaertneri), represents a new class of cereal inhibitor family. It exhibits a completely new motif of trypsin inhibitory site and is not found in any known trypsin inhibitor structures. The alpha-amylase inhibitory site resides at the N-terminal region. These two sites are independent of each other and the inhibitor forms a ternary (1:1:1) complex with trypsin and alpha-amylase. The trypsin inhibition follows a simple competitive inhibition obeying the canonical serine protease inhibitor mechanism. However, the alpha-amylase inhibition kinetics is a complex one if larger (> or =7 glucose units) substrate is used. While a complete inhibition of trypsin activity can be achieved, the inhibition of amylase is not complete even at very high molar concentration. We have isolated the N-terminal fragment (10 amino acids long) by CNBr hydrolysis of RATI. This fragment shows a simple competitive inhibition of alpha-amylase activity. We have also synthesized various peptides homologous to the N-terminal sequence of RATI. These peptides also show a normal competitive inhibition of alpha-amylase with varying potencies. It has also been shown that RATI binds to the larger substrates of alpha-amylase. In light of these observations, we have reexamined the binding of proteinaceous inhibitors to alpha-amylase and its implications on the mechanism and kinetics of inhibition.

Binding, Competitive↗

PubMed2001

Sequence and crystal structure determination of a basic phospholipase A2 from common krait (Bungarus caeruleus) at 2.4 A resolution: identification and characterization of its pharmacological sites.

This is the first phospholipase A2 (PLA2) structure from the family of kraits. The protein was isolated from Bungarus caeruleus (common krait) and the primary sequence was determined using cDNA approach. Three-dimensional structure of this presynaptic neurotoxic PLA2 from group I has been determined by molecular replacement method using the model of PLA2 component of beta2-bungarotoxin (Bungarus multicinctus) and refined using CNS package to a final R-factor of 20.1 % for all the data in resolution range 20.0-2.4 A. The final refined model comprises 897 protein atoms and 77 water molecules. The overall framework of krait phospholipase A2 with three long helices and two short antiparallel beta-strands is extremely similar to those observed for other group I PLA2s. However, the critical parts of PLA2 folding are concerned with its various functional loops. The conformations of these loops determine the efficiency of enzyme action and presence/absence of various pharmacological functions. In the present structure calcium-binding loop is occupied by a sodium ion with a 7-fold co-ordination. The conformation of loop 55-75 in krait PLA2 corresponds to a very high activity of the enzyme. A comparison of its sequence with multimeric PLA2s clearly shows the absence of critical residues such as Tyr3, Trp61 and Phe64, which are involved in the multimerization of PLA2 molecules. The protein shows anticoagulant and neurotoxic activities.

Amino Acid Sequence↗

PubMed2001

Structure of a serine protease proteinase K from Tritirachium album limber at 0.98 A resolution.

X-ray diffraction data at atomic resolution to 0.98 A with 136 380 observed unique reflections were collected using a high quality proteinase K crystals grown under microgravity conditions and cryocooled. The structure has been refined anisotropically with REFMAC and SHELX-97 with R-factors of 11.4 and 12.8%, and R(free)-factors of 12.4 and 13.5%, respectively. The refined model coordinates have an overall rms shifts of 0.23 A relative to the same structure determined at room temperature at 1.5 A resolution. Several regions of the main chain and the side chains, which were not observed earlier have been seen more clearly. For example, amino acid 207, which was reported earlier as Ser has been clearly identified as Asp. Furthermore, side-chain disorders of 8 of 279 residues in the polypeptide have been identified. Hydrogen atoms appear as significant peaks in the F(o) - F(c) difference electron density map accounting for an estimated 46% of all hydrogen atoms at 2sigma level. Furthermore, the carbon, nitrogen, and oxygen atoms can be differentiated clearly in the electron density maps. Hydrogen bonds are clearly identified in the serine protease catalytic triad (Ser-His-Asp). Furthermore, electron density is observed for an unusual, short hydrogen bond between aspartic acid and histidine in the catalytic triad. The short hydrogen bond, designated "catalytic hydrogen bond", occurs as part of an elaborate hydrogen bond network, involving Asp of the catalytic triad. Though unusual, these features seem to be conserved in other serine proteases. Finally there are clear electron density peaks for the hydrogen atoms associated with the Ogamma of Ser 224 and Ndelta1 of His 69.

Ascomycota↗

PubMed2001

Enhancement of enzyme activity through three-phase partitioning: crystal structure of a modified serine proteinase at 1.5 A resolution.

Three-phase partitioning is fast developing as a novel bioseparation strategy with a wide range of applications including enzyme stability and enhancement of its catalytic activity. Despite all this, the enzyme behaviour in this process still remains unknown. A serine proteinase, proteinase K, was subjected to three-phase partitioning (TPP). A 3 ml volume of proteinase K solution (3 mg/ml in 0.05 M acetate buffer, pH 6.0) was brought to 30% (w/v) ammonium sulphate saturation by addition of saturated ammonium sulphate. tert-Butanol (6 ml) was added to this solution and the mixture was incubated at 25 degrees C for 1 h. The precipitated protein in the mid-layer was dissolved in 3 ml of 0.05 M acetate buffer, pH 6.0. The specific activity of the processed enzyme was estimated and was found to be 210% of the original enzyme activity. In order to understand the basis of this remarkable enhancement of the enzyme activity, the structure of the TPP-treated enzyme was determined by X-ray diffraction at 1.5 A resolution. The overall structure of the TPP-treated enzyme is similar to the original structure in an aqueous environment. The hydrogen bonding system of the catalytic triad is intact. However, the water structure in the substrate binding site has undergone a rearrangement as some of the water molecules are either displaced or completely absent. Two acetate ions were identified in the structure. One is located in the active site and seems to mimic the role of water in the enzyme activity and stability. The other is located at the surface of the molecule and is involved in stabilizing the local structure of the enzyme. The most striking observation in respect of the present structure pertains to a relatively higher overall temperature factor (B = 19.7 A(2)) than the value of 9.3 A(2) in the original enzyme. As a result of a higher B-factor, a number of residues, particularly their side chains, were found to adopt more than one conformation. It appears that the protein exists in an excited state which might be helping the enzyme to function more rapidly than the original enzyme in aqueous media. Summarily, the basis of increased enzymatic activity could be attributed to (i) the presence of an acetate ion at the active site and (ii) its excited state as reflected by an overall higher B-factor.

Crystallography, X-Ray↗

PubMed2001

Mercury induced modifications in the stereochemistry of the active site through Cys-73 in a serine protease--crystal structure of the complex of a partially modified proteinase K with mercury at 1.8 A resolution.

Proteinese K (PK) isolated from Tritirachium album Limber was crystallized with HgCl2 in excess, under microgravity conditions. The intensity data were collected at 4 degrees C to 1.8 A resolution and the final R-factor after refinement for all the reflections was 0.164. Mercury has been found at two sites with partial occupancies (0.4 and 0.6) which are at distances of 2.48 A and 2.58 A respectively from Cys-73 Sgamma. The Cys-73 in the enzyme structure is located close to the active site residue, His-69. This region is completely buried and is not accessible to the solvent. It is rather tightly packed. Therefore, the binding of mercury distorts the stereochemistry of the neighbouring residues including those belonging to the catalytic triad. As a result of this, the Ogamma of Ser-224 is displaced by 0.6 A which causes the inactivation of proteinase K by increasing the H-bond distance to 3.7 A between Ser-224 Ogamma and His-69 Nepsilon2.

Amino Acids↗

PubMed2000

Structure of the bifunctional inhibitor of trypsin and alpha-amylase from ragi seeds at 2.2 A resolution.

The crystal structure of a bifunctional inhibitor of alpha-amylase and trypsin (RATI) from ragi seeds (Indian finger millet, Eleusine coracana Gaertneri) has been determined by X-ray diffraction at 2.2 A resolution. The inhibitor consists of 122 amino acids, with five disulfide bridges, and belongs to the plant alpha-amylase/trypsin inhibitor family. The crystals were grown by the microdialysis method using ammonium sulfate as a precipitating agent. The structure was determined by the molecular-replacement method using as models the structures of Corn Hageman factor inhibitor (CHFI) and of RATI at 2.9 A resolution determined previously. It has been refined to an R factor of 21.9%. The structure shows an r.m.s. deviation for C(alpha) atoms of 2.0 A compared with its own NMR structure, whereas the corresponding value compared with CHFI is found to be 1.4 A. The r.m.s. difference for C(alpha) atoms when compared with the same protein in the structure of the complex with alpha-amylase is 0.7 A. The conformations of trypsin-binding loop and the alpha-amylase-binding N-terminal region were also found to be similar in the crystal structures of native RATI and its complex with alpha-amylase. These regions differed considerably in the NMR structure.

Amino Acid Sequence↗

PubMed1999

Structure of the bifunctional inhibitor of trypsin and alpha-amylase from ragi seeds at 2.9 A resolution.

The crystal structure of a bifunctional inhibitor of alpha-amylase and trypsin from the seeds of ragi (Indian finger millet, Eleusine coracana Gaertneri) has been determined by an X-ray diffraction method. The inhibitor consists of 122 amino acids with five disulfide bridges and belongs to the plant alpha-amylase/trypsin-inhibitor family. This is the first crystal structure determination of a member of this family. The protein, purified from the seeds of ragi, has a molecular mass of 13300 Da with a pI of 10.3. Crystals were grown by a microdialysis method using ammonium sulfate as precipitant. The improved purification protocol and the modified crystallization conditions enabled reproducible growth of the crystals. The cell parameters are a = 41. 2, b = 47.4, c = 55.9 A. The intensity data were collected to 2.9 A resolution, and the crystal structure was determined using the molecular-replacement method. The structure was refined using the X-PLOR and CCP4 program packages to a conventional R factor of 21%. The structure contains four alpha-helices between residues 19-29, 37-51, 56-65 and 90-95, and two short antiparallel beta-strands between residues 67-70 and 73-75.

Binding Sites↗