PubMed Health⌕ Search

Biomedical subjects

S Howorka

Publications and source records attributed to S Howorka.

8 recordsLinked to original sources
PubMed2001

Kinetics of duplex formation for individual DNA strands within a single protein nanopore.

A single oligonucleotide was covalently attached to a genetically engineered subunit of the heptameric protein pore, alpha-hemolysin, to allow DNA duplex formation inside the pore lumen. Single-channel current recording was used to study the properties of the modified pore. On addition of an oligonucleotide 8 bases in length and with a sequence complementary to the tethered DNA strand, current blockades with durations of hundreds of milliseconds occurred, representing hybridization events of individual oligonucleotides to the tethered DNA strand. Kinetic constants for DNA duplex formation at the single molecule level were derived and found to be consistent with established literature values for macroscopic duplex formation. The resultant equilibrium constant for duplex formation in the nanopore was found to be close to the experimentally derived constant for duplex formation in solution. A good agreement between the equilibrium constants for duplex formation in the nanopore and in solution was also found for two other oligonucleotide pairs. In addition, the nanopore recordings revealed details of the kinetics difficult to obtain by conventional methods, like surface plasmon resonance, which measure ensemble properties. By investigating the temperature dependence of DNA duplex formation at the single molecule level, the standard enthalpy and entropy of the interaction could be obtained.

DNA↗
PubMed2001

Sequence-specific detection of individual DNA strands using engineered nanopores.

We describe biosensor elements that are capable of identifying individual DNA strands with single-base resolution. Each biosensor element consists of an individual DNA oligonucleotide covalently attached within the lumen of the alpha-hemolysin (alphaHL) pore to form a "DNA-nanopore". The binding of single-stranded DNA (ssDNA) molecules to the tethered DNA strand causes changes in the ionic current flowing through a nanopore. On the basis of DNA duplex lifetimes, the DNA-nanopores are able to discriminate between individual DNA strands up to 30 nucleotides in length differing by a single base substitution. This was exemplified by the detection of a drug resistance-conferring mutation in the reverse transcriptase gene of HIV. In addition, the approach was used to sequence a complete codon in an individual DNA strand tethered to a nanopore.

Base Pair Mismatch↗
PubMed2001

Location of a constriction in the lumen of a transmembrane pore by targeted covalent attachment of polymer molecules.

Few methods exist for obtaining the internal dimensions of transmembrane pores for which 3-D structures are lacking or for showing that structures determined by crystallography reflect the internal dimensions of pores in lipid bilayers. Several approaches, involving polymer penetration and transport, have revealed limiting diameters for various pores. But, in general, these approaches do not indicate the locations of constrictions in the channel lumen. Here, we combine cysteine mutagenesis and chemical modification with sulfhydryl-reactive polymers to locate the constriction in the lumen of the staphylococcal alpha-hemolysin pore, a model protein of known structure. The rates of reaction of each of four polymeric reagents (MePEG-OPSS) of different masses towards individual single cysteine mutants, comprising a set with cysteines distributed over the length of the lumen of the pore, were determined by macroscopic current recording. The rates for the three larger polymers (1.8, 2.5, and 5.0 kD) were normalized with respect to the rates of reaction with a 1.0-kD polymer for each of the seven positions in the lumen. The rate of reaction of the 5.0-kD polymer dropped dramatically at the centrally located Cys-111 residue and positions distal to Cys-111, whether the reagent was applied from the trans or the cis side of the bilayer. This semi-quantitative analysis sufficed to demonstrate that a constriction is located at the midpoint of the pore lumen, as predicted by the crystal structure, and although the constriction allows a 2.5-kD polymer to pass, transport of a 5.0-kD molecule is greatly restricted. In addition, PEG chains gave greater reductions in pore conductance when covalently attached to the narrower regions of the lumen, permitting further definition of the interior of the pore. The procedures described here should be applicable to other pores and to related structures such as the vestibules of ion channels.

Animals↗
PubMed2000

Surface-accessible residues in the monomeric and assembled forms of a bacterial surface layer protein.

The S-layer protein SbsB of the thermophilic, Gram-positive organism Bacillus stearothermophilus PV72/p2 forms a crystalline, porous array constituting the outermost component of the cell envelope. SbsB has a molecular mass of 98 kDa, and the corresponding S-layer exhibits an oblique lattice symmetry. To investigate the molecular structure and assembly of SbsB, we replaced 75 residues (mainly serine, threonine, and alanine), located throughout the primary sequence, with cysteine, which is not found in the wild-type protein. As determined by electron microscopy, 72 out of 75 mutants formed regularly-structured self-assembly products identical to wild-type, thereby proving that the replacement of most of the selected amino acids by cysteine does not dramatically alter the structure of the protein. The three defective mutants, which showed a greatly reduced ability to self-assemble, were, however, successfully incorporated into S-layers of wild-type protein. Monomeric SbsB mutants and SbsB mutants assembled into S-layers were subjected to a surface accessibility screen by targeted chemical modification with a 5-kDa hydrophilic cysteine-reactive polyethylene glycol conjugate. In the monomeric form of SbsB, 34 of the examined residues were not surface accessible, while 23 were classified as very accessible, and 18 were of intermediate surface accessibility. By contrast, in the assembled S-layers, 57 of the mutated residues were not accessible, six were very accessible, and 12 of intermediate accessibility. Together with other structural information, the results suggest a model for SbsB in which functional domains are segregated along the length of the polypeptide chain.

Bacterial Proteins↗
PubMed2000

Detecting protein analytes that modulate transmembrane movement of a polymer chain within a single protein pore.

Here we describe a new type of biosensor element for detecting proteins in solution at nanomolar concentrations. We tethered a 3.4 kDa polyethylene glycol chain at a defined site within the lumen of the transmembrane protein pore formed by staphylococcal alpha-hemolysin. The free end of the polymer was covalently attached to a biotin molecule. On incorporation of the modified pore into a lipid bilayer, the biotinyl group moves from one side of the membrane to the other, and is detected by reversible capture with a mutant streptavidin. The capture events are observed as changes in ionic current passing through single pores in planar bilayers. Accordingly, the modified pore allows detection of a protein analyte at the single-molecule level, facilitating both quantification and identification through a distinctive current signature. The approach has higher time resolution compared with other kinetic measurements, such as those obtained by surface plasmon resonance.

Antibodies, Monoclonal↗
PubMed1999

Self-assembly product formation of the Bacillus stearothermophilus PV72/p6 S-layer protein SbsA in the course of autolysis of Bacillus subtilis.

In order to achieve high level expression and to study the release of a protein capable of self-assembly, the gene encoding the crystalline cell surface (S-layer) protein SbsA of Bacillus stearothermophilus PV72/p6, including its signal sequence, was cloned and expressed in Bacillus subtilis. To obtain high level expression, a tightly regulated, xylose-inducible, stably replicating multicopy-plasmid vector was constructed. After induction of expression, the S-layer protein made up about 15% of the total cellular protein content, which was comparable to the SbsA content of B. stearothermophilus PV72/p6 cells. During all growth stages, SbsA was poorly secreted to the ambient cellular environment by B. subtilis. Extraction of whole cells with guanidine hydrochloride showed that in late stationary growth phase cells 65% of the synthesised SbsA was retained in the peptidoglycan-containing layer, indicating that the rigid cell wall layer was a barrier for efficient SbsA secretion. Electron microscopic investigation revealed that SbsA release from the peptidoglycan-containing layer started in the late stationary growth phase at distinct sites at the cell surface leading to the formation of extracellular self-assembly products which did not adhere to the cell wall surface. In addition, intracellular sheet-like SbsA self-assembly products which followed the curvature of the cell became visible in partly lysed cells. Intracellularly formed self-assembly products remained intact even after complete lysis of the rigid cell envelope layer.

Bacillus subtilis↗
PubMed1996

2-D protein crystals as an immobilization matrix for producing reaction zones in dipstick-style immunoassays.

In the present study, the applicability of crystalline bacterial cell-surface layers (S-layers) as novel immobilization matrices and reaction zones for dipstick-style immunoassays was investigated. For this purpose, S-layer-carrying cell-wall fragments from Bacillus sphaericus CCM 2120 were deposited on a microporous support, and the S-layer protein was cross-linked with glutaraldehyde. For developing appropriate test systems, either human IgG was directly linked to the carboxylic acid groups from the S-layer protein or it was immobilized using Protein A or, after biotinylation, using streptavidin. A clear correlation was obtained between the amount of anti-human IgG applied and the absorbance values in the immunoassays. S-layers with covalently bound recombinant major birch pollen allergen were used for quantitative and semiquantitative determination of an antibody raised against it. Using S-layers as an immobilization matrix in comparison to amorphous polymers has advantages in that the closed monolayers of functional macromolecules on their outermost surface allows for strong signals in immunoassays, almost completely eliminates background and prevents diffusion.

Antibodies, Monoclonal↗