PubMed Health⌕ Search

Biomedical subjects

S J Benkovic

Publications and source records attributed to S J Benkovic.

At least 55 records · Page 3Linked to original sources

New insights into inhibitor design from the crystal structure and NMR studies of Escherichia coli GAR transformylase in complex with beta-GAR and 10-formyl-5,8,10-trideazafolic acid.

The crystal structure of Escherichia coli GAR Tfase at 2.1 A resolution in complex with 10-formyl-5,8,10-trideazafolic acid (10-formyl-TDAF, K(i) = 260 nM), an inhibitor designed to form an enzyme-assembled multisubstrate adduct with the substrate, beta-GAR, was studied to determine the exact nature of its inhibitory properties. Rather than forming the expected covalent adduct, the folate inhibitor binds as the hydrated aldehyde (gem-diol) in the enzyme active site, in a manner that mimics the tetrahedral intermediate of the formyl transfer reaction. In this hydrated form, the inhibitor not only provides unexpected insights into the catalytic mechanism but also explains the 10-fold difference in inhibitor potency between 10-formyl-TDAF and the corresponding alcohol, and a further 10-fold difference for inhibitors that lack the alcohol. The presence of the hydrated aldehyde was confirmed in solution by (13)C-(1)H NMR spectroscopy of the ternary GAR Tfase-beta-GAR-10-formyl-TDAF complex using the (13)C-labeled 10-formyl-TDAF. This insight into the behavior of the inhibitor, which is analogous to protease or transaminase inhibitors, provides a novel and previously unrecognized basis for the design of more potent inhibitors of the folate-dependent formyl transfer enzymes of the purine biosynthetic pathway and development of anti-neoplastic agents.

Binding, Competitive↗

Production of cyclic peptides and proteins in vivo.

Combinatorial libraries of synthetic and natural products are an important source of molecular information for the interrogation of biological targets. Methods for the intracellular production of libraries of small, stable molecules would be a valuable addition to existing library technologies by combining the discovery potential inherent in small molecules with the large library sizes that can be realized by intracellular methods. We have explored the use of split inteins (internal proteins) for the intracellular catalysis of peptide backbone cyclization as a method for generating proteins and small peptides that are stabilized against cellular catabolism. The DnaE split intein from Synechocystis sp. PCC6803 was used to cyclize the Escherichia coli enzyme dihydrofolate reductase and to produce the cyclic, eight-amino acid tyrosinase inhibitor pseudostellarin F in bacteria. Cyclic dihydrofolate reductase displayed improved in vitro thermostability, and pseudostellarin F production was readily apparent in vivo through its inhibition of melanin production catalyzed by recombinant Streptomyces antibioticus tyrosinase. The ability to generate and screen for backbone cyclic products in vivo is an important milestone toward the goal of generating intracellular cyclic peptide and protein libraries.

Bacterial Proteins↗

NMR characterization of the metallo-beta-lactamase from Bacteroides fragilis and its interaction with a tight-binding inhibitor: role of an active-site loop.

Understanding the structure and dynamics of the enzymes that mediate antibiotic resistance of pathogenic bacteria will allow us to take steps to combat this increasingly serious public health hazard. Complete backbone NMR resonance assignments have been made for the broad-specificity metallo-beta-lactamase CcrA from Bacteroides fragilis in the presence and absence of a tight-binding inhibitor. Chemical shift indices show that the secondary structure of the CcrA molecule in solution is very similar to that in published crystal structures. A loop adjacent to the two-zinc catalytic site exhibits significant structural variation in the published structures, but appears from the NMR experiments to be a regular beta-hairpin. Backbone heteronuclear NOE measurements indicate that this region has slightly greater flexibility on a picosecond to nanosecond time scale than the molecule as a whole. The loop appears to have an important role in the binding of substrates and inhibitors. Binding of the inhibitor 3-[2'-(S)-benzyl-3'-mercaptopropanoyl]-4-(S)-carboxy-5, 5-dimethylthiazolidine causes a marked increase in the stability of the protein toward unfolding and aggregation, and causes changes in the NMR resonance frequencies of residues close to the active (zinc-binding) site, including the beta-hairpin loop. There is a small but significant increase in the heteronuclear NOE for this loop upon inhibitor binding, indicative of a decrease in flexibility. In particular, the NOE of the indole ring of tryptophan 49, at the tip of the beta-hairpin loop, changes from a low value characteristic of a random coil chain to a significantly higher value, close to that observed for the backbone amides in this region of the protein. These results strongly suggest that the hairpin loop participates in the binding of substrate and in the shielding of the zinc sites from solvent. The broad specificity of the CcrA metallo-beta-lactamase may in fact reside in the plasticity of this part of the protein, which allows it to accommodate and bind tightly to substrates of a variety of shapes and sizes.

Bacterial Proteins↗

The carboxyl terminus of the bacteriophage T4 DNA polymerase contacts its sliding clamp at the subunit interface.

The location of the interaction of the COOH terminus of the bacteriophage T4 DNA polymerase with its trimeric, circular sliding clamp has been established. A peptide corresponding to the COOH terminus of the DNA polymerase was labeled with a fluorophore and fluorescence spectroscopy used to show that it forms a specific complex with the sliding clamp by virtue of its low K(D) value (7.1 +/- 1.0 microM). The same peptide was labeled with a photoaffinity probe and cross-linked to the sliding clamp. Mass spectrometry of tryptic digests determined the sole linkage point to be Ala-159 on the sliding clamp, an amino acid that lies on the subunit interface. These results demonstrate that the COOH terminus of the DNA polymerase is inserted into the subunit interface of its sliding clamp, thereby conferring processivity to the DNA polymerase.

Bacteriophage T4↗

Structural basis for amide hydrolysis catalyzed by the 43C9 antibody.

Among catalytic antibodies, the well-characterized antibody 43C9 is unique in its ability to catalyze the difficult, but desirable, reaction of selective amide hydrolysis. The crystallographic structures that we present here for the single-chain variable fragment of the 43C9 antibody, both with and without the bound product p -nitrophenol, strongly support and extend the structural and mechanistic information previously provided by a three-dimensional computational model, together with extensive biochemical, kinetics, and mutagenesis results. The structures reveal an unexpected extended beta-sheet conformation of the third complementarity determining region of the heavy chain, which may be coupled to the novel indole ring orientation of the adjacent Trp H103. This unusual conformation creates an antigen-binding site that is significantly deeper than predicted in the computational model, with a hydrophobic pocket that encloses the p -nitrophenol product. Despite these differences, the previously proposed roles for Arg L96 in transition-state stabilization and for His L91 as the nucleophile that forms a covalent acyl-antibody intermediate are fully supported by the crystallographic structures. His L91 is now centered at the bottom of the antigen-binding site with the imidazole ring poised for nucleophilic attack. His L91, Arg L96, and the bound p -nitrophenol are linked into a hydrogen-bonding network by two well-ordered water molecules. These water molecules may mimic the positions of the phosphonamidate oxygen atoms of the antigen, which in turn mimic the transition state of the reaction. This network also contains His H35, suggesting that this residue may also stabilize the transition-states. A possible proton-transfer pathway from His L91 through two tyrosine residues may assist nucleophilic attack. Although transition-state stabilization is commonly observed in esterolytic antibodies, nucleophilic attack appears to be unique to 43C9 and accounts for the unusually high catalytic activity of this antibody.

Amides↗

On the mechanism of the metallo-beta-lactamase from Bacteroides fragilis.

The catalytic mechanism of metallo-beta-lactamase from Bacteroides fragilis, a dinuclear Zn(II)-containing enzyme responsible for multiple antibiotic resistance, has been investigated by using nitrocefin as a substrate. Rapid-scanning and single-wavelength stopped-flow studies revealed the accumulation during turnover of an enzyme-bound intermediate with intense absorbance at 665 nm (epsilon = 30 000 M(-1) cm(-1)). The proposed minimum kinetic mechanism for the B. fragilis metallo-beta-lactamase-catalyzed nitrocefin hydrolysis [Wang, Z., and Benkovic, S. J. (1998) J. Biol. Chem. 273, 22402-22408] was confirmed, and more accurate kinetic parameters were obtained from computer simulations and fitting. The intermediate was shown to be a novel anionic species bound to the enzyme through a Zn-acyl linkage and contains a negatively charged nitrogen leaving group. This is the first time such an intermediate was observed in the catalytic cycle of a Zn(II)-containing hydrolase and is evidence for a unique beta-lactam hydrolysis mechanism in which the amine can leave as an anion; prior protonation is not required. The electrostatic interaction between the negatively charged intermediate and the positively charged dinuclear Zn(II) center of the enzyme is important for stabilization of the intermediate. The catalytic reaction was accelerated in the presence of exogenous nucleophiles or anions, and neither the product nor the enzyme was modified during turnover, indicating that a Zn-bound hydroxide (rather than Asp-103) is the active site nucleophile. On the basis of all the information on hand, a catalytic mechanism of the B. fragilis metallo-beta-lactamase is proposed.

Anions↗

Catalytic mechanism of Escherichia coli glycinamide ribonucleotide transformylase probed by site-directed mutagenesis and pH-dependent studies.

Site-directed mutagenesis followed by studies of the pH dependence of the kinetic parameters of the mutants has been used to probe the role of the active site residues and loops in catalysis by glycinamide ribonucleotide transformylase (EC 2.1.2.2). The analysis of the mutants of the strictly conserved active site residues, His108 and Asp144, revealed that His108 acts in a salt bridge with Asp144 as a general acid catalyst with a pK(a) value of 9.7. Asp144 also plays a key role in the preparation of the active site geometry for catalysis. The rate-limiting step in the pH range of 6-10 appears to be the catalytic steps involving tetrahedral intermediates, supported by the observation of a pL (L being H or D)-independent solvent deuterium isotope effect of 2. The ionization of the amino group of glycinamide ribonucleotide both as a free and as a bound form dominates the kinetic behavior at low pH. The analysis of a mutation, H121Q, within the loop spanning amino acids 111-131 suggests the closure of the loop is involved in the binding of the substrate. The kinetic behavior parallels pH effects revealed by a series of X-ray crystallographic structures of the apoenzyme and inhibitor-bound enzyme [Su, Y., Yamashita, M. M., Greasley, S. E. , Mullen, C. A., Shim, J. H., Jennings, P. A., Benkovic, S. J., and Wilson, I. A. (1998) J. Mol. Biol. 281, 485-499], permitting a more exact formulation of the probable catalytic mechanism.

Binding Sites↗

Sliding clamp of the bacteriophage T4 polymerase has open and closed subunit interfaces in solution.

The sliding clamps of bacteriophage T4 (gp45), Escherichia coli (beta clamp), and yeast (PCNA) are required for processive DNA synthesis by their cognate DNA polymerases. The X-ray crystal structures of all three of these clamps have been shown to be closed, circular complexes. This paper reports investigations of the solution structure of bacteriophage T4 gp45 by analytical ultracentrifugation, fluorescence, and hydrodynamic modeling. Mutants of gp45 with inter- and intrasubunit disulfide bonds were created to alter the solution structure of gp45, with additional mutagenesis used to investigate the importance of the proline-rich loop region found between the two domains of each gp45 monomer. The wild-type gp45 trimer assembles from monomers cooperatively with a dissociation constant of 0.21 microM2 and values between 0.088 and 0. 32 microM2 for the mutants. Velocity ultracentrifugation experiments showed that wild-type gp45 possesses a sedimentation coefficient strongly dependent on concentration, typical of asymmetric or elongated molecules, that when extrapolated to zero concentration yields a sedimentation coefficient of 4.0 S. The loop and the disulfide mutants exhibited sedimentation coefficients with little concentration dependence, typical of symmetric or spherical molecules, that when extrapolated to zero concentration yielded sedimentation coefficients of 4.4-4.8 S. The lower sedimentation coefficient in the former case is consistent with wild-type gp45 being more asymmetric or elongated than the mutant forms. Fluorescence-resonance energy-transfer experiments were used to measure the distance between two amino acids (W91 and V162C-coumarin) on opposite sides of the gp45 subunit interface. For an intrasubunit disulfide mutant, the distance between these two amino acids was determined to be 19 A (14 A in the X-ray crystal structure), consistent with a closed complex. For the mutants without intrasubunit disulfides, the efficiency of fluorescence-resonance energy transfer was in accord with a model of gp45 being an open complex composed of two closed subunit interfaces and a third open interface separated by a distance of 35-38 A. The collective data supplemented with hydrodynamic modeling were consistent with gp45 subunit separation achieved within the plane of the gp45 ring.

Adenosine Triphosphatases↗

Combinatorial protein engineering by incremental truncation.

We have developed a combinatorial approach, using incremental truncation libraries of overlapping N- and C-terminal gene fragments, that examines all possible bisection points within a given region of an enzyme that will allow the conversion of a monomeric enzyme into its functional heterodimer. This general method for enzyme bisection will have broad applications in the engineering of new catalytic functions through domain swapping and chemical synthesis of modified peptide fragments and in the study of enzyme evolution and protein folding. We have tested this methodology on Escherichia coli glycinamide ribonucleotide formyltransferase (PurN) and, by genetic selection, identified PurN heterodimers capable of glycinamide ribonucleotide transformylation. Two were chosen for physical characterization and were found to be comparable to the wild-type PurN monomer in terms of stability to denaturation, activity, and binding of substrate and cofactor. Sequence analysis of 18 randomly chosen, active PurN heterodimers revealed that the breakpoints primarily clustered in loops near the surface of the enzyme, that the breaks could result in the deletion of highly conserved residues and, most surprisingly, that the active site could be bisected.

Amino Acid Sequence↗

Rational design of a scytalone dehydratase-like enzyme using a structurally homologous protein scaffold.

The generation of enzymes to catalyze specific reactions is one of the more challenging problems facing protein engineers. Structural similarities between the enzyme scytalone dehydratase with nuclear transport factor 2 (NTF2) suggested the potential for NTF2 to be re-engineered into a scytalone dehydratase-like enzyme. We introduced four key catalytic residues into NTF2 to create a scytalone dehydratase-like active site. A C-terminal helix found in scytalone dehydratase but absent in NTF2 also was added. Mutant NTF2 proteins were tested for catalytic activity by using a spectroscopic assay. One of the engineered enzymes exhibited catalytic activity with minimal kcat and Km values of 0.125 min-1 and 800 microM, respectively. This level of catalytic activity represents minimally a 150-fold improvement in activity over the background rate for substrate dehydration and a dramatic step forward from the catalytically inert parent NTF2. This work represents one of the few examples of converting a protein scaffold into an enzyme, outside those arising from the induction of catalytic activity into antibodies.

Amino Acid Sequence↗

Incremental truncation as a strategy in the engineering of novel biocatalysts.

The application and success of combinatorial approaches to protein engineering problems have increased dramatically. However, current directed evolution strategies lack a combinatorial methodology for creating libraries of hybrid enzymes which lack high homology or for creating libraries of highly homologous genes with fusions at regions of non-identity. To create such hybrid enzyme libraries, we have developed a series of combinatorial approaches that utilize the incremental truncation of genes, gene fragments or gene libraries. For incremental truncation, Exonuclease III is used to create a library of all possible single base-pair deletions of a given piece of DNA. Incremental truncation libraries (ITLs) have applications in protein engineering as well as protein folding, enzyme evolution, and the chemical synthesis of proteins. In addition, we are developing a methodology of DNA shuffling which is independent of DNA sequence homology.

Amino Acid Motifs↗

Metallo-beta-lactamase: structure and mechanism.

This past year has produced determinations of X-ray crystal structures for three metallo-beta-lactamases and the elucidation of the catalytic mechanisms for a monozinc and a dizinc enzyme. These advances shed light on how such a diverse group of enzymes are evolving to inactivate so efficiently a broad spectrum of beta-lactam antibiotics.

Amino Acid Sequence↗

A combinatorial approach to hybrid enzymes independent of DNA homology.

We present a methodology, termed incremental truncation for the creation of hybrid enzymes (ITCHY), that creates combinatorial fusion libraries between genes in a manner that is independent of DNA homology. We compared the ability of ITCHY and DNA shuffling to create interspecies fusion libraries between fragments of the Escherichia coli and human glycinamide ribonucleotide transformylase genes, which have only 50% identity on the DNA level. Sequencing of several randomly selected positives from each library illustrated that ITCHY identified a more diverse set of active fusion points including those in regions of nonhomology and those with crossover points that diverged from the sequence alignment. Furthermore, some of the hybrids found by ITCHY that were fused at nonhomologous locations had activities that were greater than or equal to the activity of the hybrids found by DNA shuffling.

Amino Acid Sequence↗

Kinetic characterization of a bacteriophage T4 antimutator DNA polymerase.

Fidelity of DNA replication by bacteriophage T4 DNA polymerase is achieved in a multiplicative process: base selection by its polymerase activity and removal of misincorporated nucleotides by its exonuclease activity. The wild-type polymerase is capable of maintaining a balance between the two activities so that DNA replication fidelity is maximized without excessive waste of nucleotides. Antimutator enzymes exhibit a higher DNA replication fidelity than the wild-type enzyme, at the cost of increased nucleotide turnover. The antimutator A737V polymerase has been characterized kinetically using pre-steady-state and steady-state methods to provide a kinetic sequence which defines the effect of the mutation on the discrete steps controlling DNA replication fidelity. Comparison of this sequence to that of the wild type [Capson, L. T., Peliska, J. A., Kaboord, B. F., Frey, M. W., Lively, C., Dahlberg, M., and Benkovic, S. J. (1992) Biochemistry 31, 10984-10994] revealed that A737V polymerase differs in two ways. The rates at which DNA is transferred between the exonuclease and polymerase sites are reduced approximately 7-fold for a duplex DNA containing a mismatched 3'-terminus, and the partitioning of the mismatched duplex between the polymerase and exonuclease sites is 1:2 versus 4:1 for the wild-type enzyme. The exonuclease activity of A737V relative to the wild-type enzyme is unchanged on single-stranded DNA. However, the difference in partitioning the duplex DNA between the exonuclease and polymerase active sites results in an enhanced exonuclease activity for the antimutator enzyme.

Bacteriophage T4↗

Active site topology of artificial peroxidase-like hemoproteins based on antibodies constructed from a specifically designed ortho-carboxy-substituted tetraarylporphyrin.

The topology of the binding site has been studied for two monoclonal antibodies 13G10 and 14H7, elicited against iron(III)-alpha,alpha,alpha,beta-meso-tetrakis(ortho-carboxyphenyl)porph yrin [alpha,alpha,alpha, beta-Fe[(o-COOHPh)4-porphyrin]], and which exhibit in the presence of this alpha,alpha,alpha, beta-Fe[(o-COOHPh)4-porphyrin] cofactor a peroxidase activity. A comparison of the dissociation constants of the complexes of 13G10 and 14H7 with various tetra-aryl-substituted porphyrin has shown that: (a) the central iron(III) atom of alpha,alpha,alpha,beta-Fe[(o-COOHPh)4-porphyrin] is not recognized by either of the two antibodies; and (b) the ortho-carboxylate substituents of the meso-phenyl rings of alpha,alpha,alpha, beta-Fe[(o-COOHPh)4-porphyrin] are essential for the recognition of the porphyrin by 13G10 and 14H7. Measurement of the dissociation constants for the complexes of 13G10 and 14H7 with the four atropoisomers of (o-COOHPh)4-porphyrinH2 as well as mono- and di-ortho-carboxyphenyl-substituted porphyrins suggests that the three carboxylates in the alpha, alpha, beta position are recognized by both 13G10 and 14H7 with the two in the alpha, beta positions more strongly bound to the antibody protein. Accordingly, the topology of the active site of 13G10 and 14H7 has roughly two-thirds of the alpha,alpha,alpha,beta-Fe[(o-COOHPh)4-porphyrin] cofactor inserted into the binding site of the antibodies, with one of the aryl ring remaining outside. Three of the carboxylates are bound to the protein but no amino acid residue acts as an axial ligand to the iron atom. Chemical modification of lysine, histidine, tryptophan and arginine residues has shown that only modification of arginine residues causes a decrease in both the binding of alpha,alpha,alpha, beta-Fe[(o-COOHPh)4-porphyrin] and the peroxidase activity of both antibodies. Consequently, at least one of the carboxylates of the hapten is bound to an arginine residue and no amino acids such as lysine, histidine or tryptophan participate in the catalysis of the heterolytic cleavage of the O-O bond of H2O2. In addition, the amino acid sequence of both antibodies not only reveals the presence of arginine residues, which could be those involved in the binding of the carboxylates of the hapten, but also the presence of several amino acids in the complementary determining regions which could bind other carboxylates through a network of H bonds.

Amino Acid Sequence↗