PubMed Health⌕ Search

Biomedical subjects

S J Breusch

Publications and source records attributed to S J Breusch.

At least 37 records · Page 2Linked to original sources
PubMed2002

[Influence of implant position of a hip prosthesis on alignment exemplified by the CLS shaft].

We performed a clinical and radiological analysis to evaluate the significance of the stem position of cementless CLS components with respect to function and survival. We used patient material from a multi-center study of 3,732 CLS stems with a mean follow-up of 43 months (range: 12-142 months). The clinical outcome was assessed using Merle D'Aubigné Scores and stem alignment was determined as the deviation of the longitudinal stem axis from the longitudinal femur axis. We found no correlation between stem alignment and function, survival, implant migration or periprosthetic radiolucent lines. In patients with rheumatoid arthritis and hip ankylosis the neutral stem position was less often achieved than in patients with other diagnoses. The results of our study cast doubt on whether the varus position of the femoral component of cementless tapered CLS-type stem designs is as critical as in cemented total hip arthroplasty.

Aged↗
PubMed2001

[Developments in hip hemi-arthroplasty and theory of the link-chain dimeric hip prosthesis].

Aim of the study was to analyze the developments of hemiarthroplasties from the femur prosthesis to the bicentric bipolar prosthesis of today. Using the theories published 1990 by Nägerl about "dimeric link chains", nineteen bipolar-head systems were analyzed and biomechanically explained. Clinical findings, such as the problems of luxation and varus positioning of the monocentric bipolars, as well as the valgus, "self-centric" positioning of the bicentric prosthesis are discussed and explained correctly by physics. The hemiarthoplasty with the bicentric bipolar system of today has realized the principles of the dimeric link chains and is superior concept. Eleven of the sixteen today available systems work like this concept which was reached by try and error. The function of a bicentric system is solved now and explained by physics.

Equipment Failure Analysis↗
PubMed2001

[Artefacts and ferromagnetism dependent on different metal alloys in magnetic resonance imaging. An experimental study].

The authors evaluated the significance of different metal alloys used in orthopaedic surgery in producing artefacts during magnetic resonance imaging. Several MRI sequences were tested and magnetic effects evaluated. Twelve discs made of different metal alloys from three manufacturers were examined. These discs were placed in a plastic box with a defined position in ultrasound gel. Then a sensitive, standard T1 weighted gradient echo sequence (TE: 4.1 ms; TR 9.4) was carried out in a coronal plane (Matrix 128/256). A Phillips Easy Vision workstation was used for image analysis. The largest area of artefact formation, including the surface size of the disc, was calculated using a special software program. In order to minimise the measurement error all discs were measured 10 times and the average value was determined. Then eight different sequences were run and measured in the same way. In a second series, all discs were placed separately on metric paper and subjected to the magnetic field of the MRI in order to detect possible motion secondary to the magnetic field applied. The different titanium alloys showed average distortion areas of from 245 mm2 (Ti6Al4V) to 349 mm2 (Ti5Al2.5Fe). Cobalt chrome alloys yielded differences of between 600 mm2 and 651 mm2 and iron alloys of between 902 mm2 (316L or Fe18Cr10NiMo) and 950 mm2 (Fe22Cr10Ni4Mn2MoNb) on average for the standard T1 weighted gradient echo. The artefact areas were dependent on the different sequences performed. For steel, (Fe18Cr10NiMo) areas of from 411 mm2 (T1TSE) to 2027 mm2 (EPI/3D/SPIR) were measured. All sequences studied produced different artefact pictures. None of the materials tested showed changes in position secondary to ferromagnetism. The size of signal distortion by MRI depends on the alloy making up the implanted material and the sequences used. The smallest artefacts occurred with the turbo-spin-echo sequences (TSE). The alloys tested in our study seem to carry no risk for patients of ferromagnetically induced secondary loosening caused by MRI scanning.

Alloys↗
PubMed2001

Dependency of cement mantle thickness on femoral stem design and centralizer.

Deficient cement mantles may be detrimental with regard to long-term outcome of cemented femoral stems. We performed a cadaver study on 48 left femora with 4 different stem designs (1 anatomic, 3 straight) to study the influence of stem design, centralizer, and femur type on cement mantle thickness. A radiographic and microradiograhic analysis was done. Overall, 88% of stems were aligned within 1 degrees of neutral in the frontal plane. In Gruen zones 1 through 7, we measured 24 thin cement mantles (<2 mm) in 19 specimens with no correlation to stem design or zone. In the sagittal plane, typical areas of thin cement mantles were identified in Gruen zones 8 and 9 (n = 39) and 12 (n = 21). The anatomic stem design carried the lowest risk (54%) of producing a thin cement mantle proximally in Gruen zones 8 and 9. The risk for straight stem designs was >90%. Straight stems without centralizer showed the highest risk of thin cement mantles in Gruen zone 12 (93%). Centralizers were efficient to prevent thin cement mantles in zone 12 but had no effect proximally. Lateral radiographs are essential to allow for adequate radiographic assessment of the cement mantle and stem alignment. There is a high risk of producing thin cement mantles in Gruen zones 8 and 9, in particular when straight stems are used. Posterior canal entry and low neck osteotomies are essential. Anatomic stems respect the anatomy, allow for more even cement mantles, minimize the risk of thin cement mantles without the use of centralizers, and may be considered in the femur with marked proximal bow.

Adult↗
PubMed2001

Cement penetration in the proximal femur does not depend on broach surface finish.

In a cadaver study, we prepared 29 paired human cadaver femora using 3 different broaches of identical geometry but different surface characteristics. In one group of 20 pairs, preparation with chipped-toothed broaches was compared to diamond-shaped broaches; in the other group of 9 pairs, polished tamps for compaction of cancellous bone were compared with chipped-tooth broaches. Cancellous bone was irrigated with 1 liter pulsed lavage. The specimens were embedded in specially-designed pots. Palacos R and Simplex bone cements were used. After vacuum mixing, the cement was applied in a retrograde manner and subjected to a standard pressure protocol with a constant force of 3,000 N. Radiographs were taken and horizontal sections were obtained at predefined levels using a diamond saw. Microradiographs were taken, digitized and analyzed to assess cement penetration into cancellous bone. In 6 of 9 femora prepared using smooth tamps, femoral fractures occurred despite careful preparation technique. The microradiographic evaluation showed no significant morphometric differences between diamond and chipped-tooth or between polished and chipped-tooth broaches with regard to cement penetration into cancellous bone. Therefore, in the presence of pulsed lavage, one finds no significant effect of broach surface characteristics on cement penetration into cancellous bone of the proximal end of the femur.

Absorption↗
PubMed2001

[Emission of air pollutants in removal of bone cement with ultrasound instruments in revision endoprosthetics].

The use of ultrasonic instruments to remove PMMA bone cement during revision hip arthroplasty results in the production of fumes. These emissions were analysed under standardized laboratory conditions, when it was found that the MMA concentration measured was only 1/10th of the MAC value. In terms of occupational safety, the MMA fumes emitted may therefore be considered non-hazardous for the medical personnel.

Air Pollutants, Occupational↗
PubMed2000

Ultrastructural findings after intraarticular application of hyaluronan in a canine model of arthropathy.

We investigated the effect of intraarticularly applied hyaluronic acid (hyaluronan) on the cartilaginous structure of experimentally induced chondromalacia patellae in dogs. For the induction of chondromalacia, we used the Pond-Nuki technique, which involved severance and resection of the anterior cruciate ligament, as a canine model of arthropathy in 27 foxhounds (three groups of nine animals each). In a pilot study, we evaluated the effect of resection of the anterior cruciate ligament with no therapy. Patellar specimens were retrieved at 3, 6, and 12 weeks postoperatively. Subsequently, we compared a treatment group that received intraarticular injections of hyaluronan with a placebo group that received saline solution. The groups were compared at 3, 6, and 12 weeks postoperatively. Three animals from the treatment and placebo groups received five injections of hyaluronan during one of the 4-week intervals (weeks 3-6, 6-9, or 12-15). Specimens were retrieved 5 weeks after the last injection. In both groups, the uninvolved contralateral knee served as a control. The specimens were taken from the medial and lateral patellar poles. Histological analysis included light microscopy and transmission electron microscopy. The structural and ultrastructural changes were assessed qualitatively and were quantified with use of a modified Mankin score. Our results indicate that chondromalacia patellae may be induced with the Pond-Nuki technique. We found a significant reduction (p < 0.01) of cartilaginous lesions in the hyaluronan group compared with the placebo group. Our results suggest that intraarticularly applied hyaluronan is effective in delaying the degenerative process of cartilage degradation. Therefore, we conclude that the use of hyaluronan may be indicated during the early stages of chondromalacia.

Adjuvants, Immunologic↗
PubMed2000

[Anchoring principles in hip endoprostheses. I: Prosthesis stem].

Total hip replacement is one of the most successful procedures in surgery. In Germany there is a great variety of cemented and uncemented implants with different principles of fixation. We reviewed the different principles, with particular reference to long-term clinical outcome, and discuss the most popular systems available in Germany. Despite many new developments which have been made in the field of cementless hip replacement, cemented total hip arthroplasty will remain the "gold standard" until prospective long-term data (> 15 years) of cementless systems become available.

Arthroplasty, Replacement, Hip↗
PubMed2000

[Anchoring principles in hip prosthesis implantation. II: Acetabulum components].

In this review the different anchorage concepts of cemented and cementless acetabular components are presented and clinical long-term results--if available--are discussed. Despite numerous design improvements and modifications the long-term durability of acetabular components remains a major concern with results being clearly inferior than achieved with femoral components. Until valid, prospective long-term success is proven for cementless designs cemented acetabular fixation using modern cementing technique must be regarded as standard treatment. However, successful fixation over 15-20 years very much depends on the quality of operative and cementing technique. Some cementless systems appear easier to use and have been documented to offer reliable mid-term survival rates. In young patients cementless devices have been well established and for some systems promising 10-year results have been published.

Acetabulum↗
PubMed2000

[Effects of the cementing technique on cementing results concerning the coxal end of the femur].

The purpose of this study was to determine the influence of jet-lavage and cement pressurising techniques upon cement penetration into proximal femoral cancellous bone. In a cadaver study 60 left human cadaver femora were used for implantation of cemented stem components. Four different groups of cementing techniques were generated, the allocation to the groups was randomized. Bone lavage was carried out either using jet-lavage or manual syringe lavage, cement application differed with regard to the amount of pressurisation used. Five different stem designs were used. Radiographs were taken and horizontal sections were obtained at predefined levels (2 cm) using a diamond saw. Microradiographs were taken and analysed using image analysis to assess cement penetration into cancellous bone. In an additional study the influence of jet-lavage (1000 ml) versus syringe lavage (1000 ml) was studied in 11 paired human cadaver femora. The specimens were imbedded in specially designed pots. Bone cement was applied in a retrograde manner and subjected to a standard pressure protocol with a constant force of 3000 N. The analysis protocol was identical to the main experiment. Both jet-lavage and pressurisation of bone cement significantly improved the penetration of cement into cancellous bone (p = 0.027 and p = 0.003, respectively). In the presence of strong, dense cancellous bone the findings were more pronounced. In the additional comparative study cement intrusion was significantly better (p < 0.001) in the jet-lavage group. We did not observe an influence of the stem type upon outcome (penetration). The use of jet-lavage yields significantly improved cement penetration and should be regarded mandatory in cemented total hip arthroplasty. High pressurising techniques are effective means to improve the interdigitation between cancellous bone and cement, but should only be administered in combination with jet-lavage to reduce the risk of thrombo-embolic complications.

Arthroplasty, Replacement, Hip↗
PubMed2000

[Cemented hip prosthesis implantation--decreasing the rate of fat embolism with pulsed pressure lavage].

Intraoperative fat embolism associated with cemented total hip arthroplasty is a well recognized complication. In a new sheep model allowing for standardized bilateral, simultaneous cement pressurization we studied the effectiveness of both pulsatile and syringe lavage of equal volume with regard to their cleansing capabilities as measured by fat and bone marrow intravasation. The operative procedure involved bilateral placement of intravenous catheters into the external iliac veins via retroperitoneal approach. After femoral neck osteotomies both femoral cavities were prepared for retrograde cement application. After randomization one side was lavaged with 250 ml irrigation using a bladder syringe, the contralateral femur with the identical volume but using a pulsatile lavage. A specially designed apparatus was used to allow for bilateral simultaneous cement pressurization. Venous blood from both iliac catheters was then collected, anticoagulated and a quantitative and qualitative fat analysis was performed. Despite equal volume manual lavage produced significantly higher fat and bone marrow intravasation (P < 0.001) than pulsatile lavage thus suggesting that not only the volume but also the quality of bone lavage is an essential factor influencing the risk of fat embolism and adverse cardiorespiratory effects. Our findings further emphasize the important role of pulsatile lavage in preventing fat and bone marrow embolisation during cemented total hip arthroplasty.

Animals↗
PubMed2000

Lavage technique in total hip arthroplasty: jet lavage produces better cement penetration than syringe lavage in the proximal femur.

Sixteen paired human cadaver femora were prepared using conventional broaches. Cancellous bone was irrigated with 1 L pulsed lavage in one femur and 1 L syringe lavage in the contralateral femur. The specimens were embedded in specially designed pots, and vacuum-mixed bone-cements were applied in a retrograde manner. After application of a standard pressure to the pots, the femora were removed and radiographed, and horizontal sections were obtained and analyzed to assess cement penetration into cancellous bone and the ratio of the area of supported to unsupported cancellous bone (Rcb). Our results show that in equal quality bone, the use of jet lavage yields significantly (P < .0001) improved cement penetration and Rcb compared with syringe lavage specimens. Jet lavage should be considered routine to achieve interdigitation with cancellous bone in cemented total hip arthroplasty.

Arthroplasty, Replacement, Hip↗
PubMed2000

Function after correction of a clawed great toe by a modified Robert Jones transfer.

We carried out a cross-sectional study in 51 patients (81 feet) with a clawed hallux in association with a cavus foot after a modified Robert Jones tendon transfer. The mean follow-up was 42 months (9 to 88). In all feet, concomitant procedures had been undertaken, such as extension osteotomy of the first metatarsal and transfer of the tendon of the peroneus longus to peroneus brevis, to correct the underlying foot deformity. All patients were evaluated clinically and radiologically. The overall rate of patient satisfaction was 86%. The deformity of the hallux was corrected in 80 feet. Catching of the big toe when walking barefoot, transfer lesions and metatarsalgia, hallux flexus, hallux limitus and asymptomatic nonunion of the interphalangeal joint were the most frequent complications. Hallux limitus was more likely when elevation of the first ray occurred (p = 0.012). Additional transfer of the tendon of peroneus longus to peroneus brevis was a significant risk factor for elevation of the first metatarsal (p < 0.0001). The deforming force of extensor hallucis longus is effectively eliminated by the Jones transfer, but the mechanics of the first metatarsophalangeal joint are altered. The muscle balance and stability of the entire first ray should be taken into consideration in the management of clawed hallux.

Adolescent↗
PubMed2000

A new concept in the treatment of anterior knee pain: patellar hypertension syndrome.

This prospective clinical study evaluated 69 patients (136 knees) presenting with anterior knee pain after failure to respond to conservative treatment. All patients agreed to undergo minimally invasive intraosseous pressure measurements of the patella under local anesthesia. Forty patients (50 knees) demonstrated a positive pain provocation test (the typical pain sensation could be reproduced by raising intrapatellar pressure) and were treated with a new method of intraosseous drilling and decompression. Ninety percent of the patients treated experienced pain relief >3 years postoperatively. Repeated intraosseous pressure measurements in 33 knees 1 year postoperatively confirmed objective intraosseous pressure reduction in 88%. Patients with anterior knee pain and a positive pain provocation test were labeled as hypertension syndrome of the patella. These results indicate simple extra-articular patellar decompression may offer a valuable new form of treatment in select patients with anterior knee pain, ie, hypertension syndrome of the patella.

Adolescent↗
PubMed1998

Increased urinary crosslink levels in aseptic loosening of total hip arthroplasty.

The diagnosis of aseptic loosening in total hip arthroplasty is predominantly based on clinical and radiographic evaluation. Loosening is usually associated with increased bone resorption at the interface. In this study we wanted to evaluate the diagnostic value of bone markers in aseptic loosening. We compared 50 patients with proven component loosening during surgery with 50 age-, sex-, and implant-matched patients without clinical or radiological signs of loosening. We measured serum markers of bone formation (bone-specific alkaline phosphatase, osteocalcin [OC], procollagen type I propeptides) and bone resorption (collagen n-telopeptide [NTX], deoxypyridinoline [DPYD], pyridinoline [PYD]). We found significantly increased levels of NTX, DPYD, PYD, and OC in the loosening group. The other markers showed no significant difference between both groups. We conclude that determination of urinary crosslinks may offer a new and valuable diagnostic method in the detection of aseptic loosening in total hip arthroplasty.

Adult↗