PubMed Health⌕ Search

Biomedical subjects

S Korolev

Publications and source records attributed to S Korolev.

17 recordsLinked to original sources

Autotracing of Escherichia coli acetate CoA-transferase alpha-subunit structure using 3.4 A MAD and 1.9 A native data.

The automation of protein structure determination is an essential component for high-throughput structural analysis in protein X-ray crystallography and is a key element in structural genomics. This highly challenging undertaking relies at present on the availability of high-quality native and derivatized protein crystals diffracting to high or moderate resolution, respectively. Obtaining such crystals often requires significant effort. The present study demonstrates that phases obtained at low resolution (>3.0 A) from crystals of SeMet-labeled protein can be successfully used for automated structure determination. The crystal structure of acetate CoA-transferase alpha-subunit was solved using 3.4 A multi-wavelength anomalous dispersion data collected from a crystal containing SeMet-substituted protein and 1.9 A data collected from a native protein crystal.

Coenzyme A-Transferases↗

Using surface-bound rubidium ions for protein phasing.

Rubidium is a monovalent metal that can be used as a counterion in protein solutions. X-ray anomalous scattering from rubidium ions bound to the protein surface was used for phasing of the crystal structure of the hsp60 apical domain from Thermus thermophilus. Multiple-wavelength anomalous dispersion (MAD) data were collected from a crystal obtained from a solution containing 0.2 M rubidium salt. One molecule of protein (147 amino acids) binds one well ordered and one poorly ordered Rb atom. Phases calculated with the program SHARP were sufficient for automatic tracing and side-chain assignment using the program ARP/wARP. The data show that bound rubidium ions can be used to determine protein structures and to study the interaction of monovalent metal ions with proteins and other macromolecules.

Bacterial Proteins↗

Structure of the major single-stranded DNA-binding domain of replication protein A suggests a dynamic mechanism for DNA binding.

Although structures of single-stranded (ss)DNA-binding proteins (SSBs) have been reported with and without ssDNA, the mechanism of ssDNA binding in eukarya remains speculative. Here we report a 2.5 Angstroms structure of the ssDNA-binding domain of human replication protein A (RPA) (eukaryotic SSB), for which we previously reported a structure in complex with ssDNA. A comparison of free and bound forms of RPA revealed that ssDNA binding is associated with a major reorientation between, and significant conformational changes within, the structural modules--OB-folds--which comprise the DNA-binding domain. Two OB-folds, whose tandem orientation was stabilized by the presence of DNA, adopted multiple orientations in its absence. Within the OB-folds, extended loops implicated in DNA binding significantly changed conformation in the absence of DNA. Analysis of intermolecular contacts suggested the possibility that other RPA molecules and/or other proteins could compete with DNA for the same binding site. Using this mechanism, protein-protein interactions can regulate, and/or be regulated by DNA binding. Combined with available biochemical data, this structure also suggested a dynamic model for the DNA-binding mechanism.

Allosteric Regulation↗

Isolated replacement of the mitral leaflets and "Mercedes"-plastics of the giant left atrium: surgery for patients with left ventricle dysfunction and left atrium enlargement.

BACKGROUND: The main goal of the present surgery is to develop a new complex of surgical procedures for patients with long-standing mitral valve incompetence, severe left atrium (LA) and left ventricle (LV) enlargement (secondary cardiomyopathy). METHODS: Seven patients were operated on using a new technique. Normal LA shape and size were restored by symmetrical "Mercedes"-plastics of the posterior LA wall. Isolated strut chordae sparing mitral leaflets replacement (SChS-MLR) was performed for preserving annular-LV interaction and biomechanics of the LV contraction. In mitral position we implanted bileaflets Carbomedics (USA) prosthesis (in 6 patients) and a tilting disc MIKC prosthesis (Russia). Additionally RA plastics and TV De Vega plastics were performed in 4 patients. Diastolic and systolic functions of the LV, the size of the LA were under TEE and 2D ECHO controls. RESULTS: All the patients were discharged from the hospital. After the operation the needs for inotropic support were minimal. We did not see any local LV wall motion abnormalities. The end diastolic volume and long-axis dimension of the LV did not have any tendency to grow. CONCLUSIONS: New surgical technique of isolated SChS-MLR together with the symmetrical restoration of the LA shape and size can be equivalent to reconstructive mitral valve surgery from the hemodynamical point of view and allows us to standardize the surgical technique for those patients with significant left heart enlargement.

Adult↗

The role for zinc in replication protein A.

Heterotrimeric human single-stranded DNA (ssDNA)-binding protein, replication protein A (RPA), is a central player in DNA replication, recombination, and repair. The C terminus of the largest subunit, RPA70, contains a putative zinc-binding motif and is implicated in complex formation with two smaller subunits, RPA14 and RPA32. The C-terminal domain of RPA70 (RPA70-CTD) was characterized using proteolysis and x-ray fluorescence emission spectroscopy. The proteolytic core of this domain comprised amino acids 432-616. X-ray fluorescence spectra revealed that RPA70-CTD possesses a coordinated Zn(II). The trimeric complex of RPA70-CTD, the ssDNA-binding domain of RPA32 (amino acids 43-171), and RPA14 had strong DNA binding activity. When properly coordinated with zinc, the trimer's affinity to ssDNA was only 3-10-fold less than that of the ssDNA-binding domain in the middle of RPA70. However, the DNA-binding activity of the trimer was dramatically reduced in the presence of chelating agents. Our data indicate that (i) Zn(II) is essential to stabilize the tertiary structure of RPA70-CTD; (ii) RPA70-CTD possesses DNA-binding activity, which is modulated by Zn(II); and (iii) ssDNA binding by the trimer is a synergistic effect generated by the RPA70-CTD and RPA32.

Amino Acid Sequence↗

Crystal structure of enteropeptidase light chain complexed with an analog of the trypsinogen activation peptide.

Enteropeptidase is a membrane-bound serine protease that initiates the activation of pancreatic hydrolases by cleaving and activating trypsinogen. The enzyme is remarkably specific and cleaves after lysine residues of peptidyl substrates that resemble trypsinogen activation peptides such as Val-(Asp)4-Lys. To characterize the determinants of substrate specificity, we solved the crystal structure of the bovine enteropeptidase catalytic domain to 2.3 A resolution in complex with the inhibitor Val-(Asp)4-Lys-chloromethane. The catalytic mechanism and contacts with lysine at substrate position P1 are conserved with other trypsin-like serine proteases. However, the aspartyl residues at positions P2-P4 of the inhibitor interact with the enzyme surface mainly through salt bridges with the Nzeta atom of Lys99. Mutation of Lys99 to Ala, or acetylation with acetic anhydride, specifically prevented the cleavage of trypsinogen or Gly-(Asp)4-Lys-beta-naphthylamide and reduced the rate of inhibition by Val-(Asp)4-Lys-chloromethane 22 to 90-fold. For these reactions, Lys99 was calculated to account for 1.8 to 2.5 kcal mol(-1) of the free energy of transition state binding. Thus, a unique basic exosite on the enteropeptidase surface has evolved to facilitate the cleavage of its physiological substrate, trypsinogen.

Amino Acid Sequence↗

Crystal structures of open and closed forms of binary and ternary complexes of the large fragment of Thermus aquaticus DNA polymerase I: structural basis for nucleotide incorporation.

The crystal structures of two ternary complexes of the large fragment of Thermus aquaticus DNA polymerase I (Klentaq1) with a primer/template DNA and dideoxycytidine triphosphate, and that of a binary complex of the same enzyme with a primer/template DNA, were determined to a resolution of 2.3, 2.3 and 2.5 A, respectively. One ternary complex structure differs markedly from the two other structures by a large reorientation of the tip of the fingers domain. This structure, designated 'closed', represents the ternary polymerase complex caught in the act of incorporating a nucleotide. In the two other structures, the tip of the fingers domain is rotated outward by 46 degrees ('open') in an orientation similar to that of the apo form of Klentaq1. These structures provide the first direct evidence in DNA polymerase I enzymes of a large conformational change responsible for assembling an active ternary complex.

Amino Acid Sequence↗

Comparisons between the structures of HCV and Rep helicases reveal structural similarities between SF1 and SF2 super-families of helicases.

Three helicase structures have been determined recently: that of the DNA helicase PcrA, that of the hepatitis C virus RNA helicase, and that of the Escherichia coli DNA helicase Rep. PcrA and Rep belong to the same super-family of helicases (SF1) and are structurally very similar. In contrast, the HCV helicase belongs to a different super-family of helicases, SF2, and shows little sequence homology with the PcrA/Rep helicases. Yet, the HCV helicase is structurally similar to Rep/PcrA, suggesting preservation of structural scaffolds and relationships between helicase motifs across these two super-families. The comparison study presented here also reveals the existence of a new helicase motif in the SF1 family of helicases.

Amino Acid Sequence↗

Crystal structures of the Klenow fragment of Thermus aquaticus DNA polymerase I complexed with deoxyribonucleoside triphosphates.

The crystal structures of the Klenow fragment of the Thermus aquaticus DNA polymerase I (Klentaq1) complexed with four deoxyribonucleoside triphosphates (dNTP) have been determined to 2.5 A resolution. The dNTPs bind adjacent to the O helix of Klentaq1. The triphosphate moieties are at nearly identical positions in all four complexes and are anchored by three positively charged residues, Arg659, Lys663, and Arg587, and by two polar residues, His639 and Gln613. The configuration of the base moieties in the Klentaq1/dNTP complexes demonstrates variability suggesting that dNTP binding is primarily determined by recognition and binding of the phosphate moiety. However, when superimposed on the Taq polymerase/blunt end DNA complex structure (Eom et al., 1996), two of the dNTP/Klentaq1 structures demonstrate appropriate stacking of the nucleotide base with the 3' end of the DNA primer strand, suggesting that at least in these two binary complexes, the observed dNTP conformations are functionally relevant.

Binding Sites↗

Structure of N-myristoyltransferase with bound myristoylCoA and peptide substrate analogs.

N-myristoyltransferase (Nmt) attaches myristate to the N-terminal glycine of many important eukaryotic and viral proteins. It is a target for anti-fungal and anti-viral therapy. We have determined the structure, to 2.9 A resolution, of a ternary complex of Saccharomyces cerevisiae Nmt1p with bound myristoylCoA and peptide substrate analogs. The model reveals structural features that define the enzyme's substrate specificities and regulate the ordered binding and release of substrates and products. A novel catalytic mechanism is proposed involving deprotonation of the N-terminal ammonium of a peptide substrate by the enzyme's C-terminal backbone carboxylate.

Acyl Coenzyme A↗

NotI linking/jumping clones of human chromosome 3: mapping of the TFRC, RAB7 and HAUSP genes to regions rearranged in leukemia and deleted in solid tumors.

By applying the 'recognition mask' strategy to 300 mammalian sequences containing NotI sites we demonstrated that 5' ends of genes are highly enriched in NotI sites. A NotI linking clone NL2-252 (D3S1678) containing transferrin receptor (TFRC) gene was used as an initial point for chromosomal jumping. One of the jumping clones, J21-045 traverses 210 kbp and links NL2-252 to NL26 (D3S1632), a NotI linking clone containing highly polymorphic sequences. The TFRC gene was mapped to 3q29, close to the telomeric marker D3S2344, by linkage analysis, a panel of hybrid cell lines, GeneBridge 4 panel and FISH. Clone NLM-007 (D3S4302) was found to contain ras-homologous gene RAB7. By FISH and a panel of hybrid cell lines this gene was mapped to 3q21. This region is of particular interest due to frequent rearrangements in different types of leukemia. Clone L2-081 (D3S4283) containing new member of ubiquitin-specific proteases (HAUSP gene) was localized in 3p21 inspiring further investigation of involvement of this gene in development of lung and renal carcinomas.

Chromosome Mapping↗

Major domain swiveling revealed by the crystal structures of complexes of E. coli Rep helicase bound to single-stranded DNA and ADP.

Crystal structures of binary and ternary complexes of the E. coli Rep helicase bound to single-stranded (ss) DNA or ssDNA and ADP were determined to a resolution of 3.0 A and 3.2 A, respectively. The asymmetric unit in the crystals contains two Rep monomers differing from each other by a large reorientation of one of the domains, corresponding to a swiveling of 130 degrees about a hinge region. Such domain movements are sufficiently large to suggest that these may be coupled to translocation of the Rep dimer along DNA. The ssDNA binding site involves the helicase motifs Ia, III, and V, whereas the ADP binding site involves helicase motifs I and IV. Residues in motifs II and VI may function to transduce the allosteric effects of nucleotides on DNA binding. These structures represent the first view of a DNA helicase bound to DNA.

Adenosine Diphosphate↗

Crystal structure of the large fragment of Thermus aquaticus DNA polymerase I at 2.5-A resolution: structural basis for thermostability.

The crystal structure of the large fragment of the Thermus aquaticus DNA polymerase (Klentaq1), determined at 2.5-A resolution, demonstrates a compact two-domain architecture. The C-terminal domain is identical in fold to the equivalent region of the Klenow fragment of Escherichia coli DNA polymerase I (Klenow pol I). Although the N-terminal domain of Klentaq1 differs greatly in sequence from its counterpart in Klenow pol I, it has clearly evolved from a common ancestor. The structure of Klentaq1 reveals the strategy utilized by this protein to maintain activity at high temperatures and provides the structural basis for future improvements of the enzyme.

Amino Acid Sequence↗

Artificial protein vaccines with predetermined tertiary structure: application to anti-HIV-1 vaccine design.

A successful approach to the development of a safe and effective synthetic vaccine requires that different B and T cell epitopes of the infectious agent be included in the vaccine construction. In this paper we suggest a new approach to vaccine design in the form of an artificial protein with a predetermined tertiary structure (PTS vaccines). Based on B and T cell epitope properties, we substantiate the possible use for vaccine construction of one well-known protein spatial motif--the four-alpha-helix bundle. Antigenic determinants of cellular immunity (amphipathic alpha-helices) and humoral immunity (flexible hydrophilic loop regions) are used as blocks for vaccine design. General principles of PTS vaccine construction have been applied to anti-HIV-1 vaccine design.

AIDS Vaccines↗