PubMed Health⌕ Search

Biomedical subjects

S L Slatin

Publications and source records attributed to S L Slatin.

At least 19 recordsLinked to original sources

Gating movements of colicin A and colicin Ia are different.

Both colicin A and colicin Ia belong to a subfamily of the bacterial colicins that act by forming a voltage-dependent channel in the inner membrane of target bacteria. Both colicin A and Ia open at positive and close at negative potential, but only colicin A exhibits distinctly biphasic turnoff kinetics, implying the existence of two open states. Previous work has shown that Colicin Ia gating is associated with the translocation of a region representing 4 of its alpha helices across the membrane. Also, if its C-terminal, channel-forming domain is detached from the other domains, its N-terminal alpha helix can now also cross the membrane, causing the conductance to drop by a factor of about 6. Colicin A gating also involves the translocation of an internal domain, but we find that its translocated domain is somewhat smaller than that of Ia. Furthermore, while its isolated C-terminal domain can also undergo a transition to a smaller conductance, the conductance change is only about 15%, and the transition does not involve the translocation of the N-terminal alpha helix. Trapping the N-terminus on the cis side prevents neither this small conductance transition nor the biphasic turn-off. So, while the gating of both channels involves large, currently inexplicable conformational changes, these motions are qualitatively different in the two proteins, which may be a reflection of the dissimilar kinetics of closing.

Amino Acid Sequence↗

The C-terminal half of the colicin A pore-forming domain is active in vivo and in vitro.

The pore-forming domain of colicin A (pfColA) fused to a prokaryotic signal peptide (sp-pfColA) is transported across and inserts into the inner membrane of Escherichia coli from the periplasmic side and forms a functional channel. The soluble structure of pfColA consists of a ten-helix bundle containing a hydrophobic helical hairpin. Here, we generated a series of mutants in which an increasing number of sp-pfColA alpha-helices was deleted. These peptides were tested for their ability to form ion channels in vivo and in vitro. We found that the shortest sp-pfColA mutant protein that killed Escherichia coli was composed of the five last alpha-helices of sp-pfColA, whereas the shortest peptide that formed a channel in planar lipid bilayer membranes similar to that of intact pfColA was the protein composed of the last six alpha-helices. The peptide composed of the last five alpha-helices of pfColA generated a voltage-independent conductance in planar lipid bilayer with properties very different from that of intact pfColA. Thus, helices 1 to 4 are unnecessary for channel formation, while helix 5, or some part of it, is important but not absolutely necessary. Voltage-dependence of colicin is evidently controlled by the first four alpha-helices of pfColA.

Amino Acid Sequence↗

Pore-forming colicins and their relatives.

The pore-forming colicins, the first proteins that were capable of forming voltage-dependent ion channels to be sequenced, have turned out to be both less tractable and more mysterious than imagined; yet they have proved interesting at every step of their short journey from producing cell to vanquished target cell. Starting out as a remarkably extended water-soluble protein, the colicin molecule is designed to interact simultaneously with several components of the complex membrane of the target cell, transform itself into a membrane protein, and become an ion channel with inscrutable properties. Unraveling how it does all this appears to be leading us into the dark recesses of protein/protein and protein/membrane interaction, where lurk fundamental processes reluctantly waiting to be revealed.

Animals↗

A new consensus error grid to evaluate the clinical significance of inaccuracies in the measurement of blood glucose.

OBJECTIVE: The objectives of this study were 1) to construct new error grids (EGs) for blood glucose (BG) self-monitoring by using the expertise of a large panel of clinicians and 2) to use the new EGs to evaluate the accuracy of BG measurements made by patients. RESEARCH DESIGN AND METHODS: To construct new EGs for type 1 and type 2 diabetic patients, a total of 100 experts of diabetes were asked to assign any error in BG measurement to 1 of 5 risk categories. We used these EGs to evaluate the accuracy of self-monitoring of blood glucose (SMBG) levels in 152 diabetic patients. The SMBG data were used to compare the new type 1 diabetes EG with a traditional EG. RESULTS: Both the type 1 and type 2 diabetes EGs divide the risk plane into 8 concentric zones with no discontinuities. The new EGs are similar to each other, but they differ from the traditional EG in several significant ways. When used to evaluate a data set of measurements made by a sample of patients experienced in SMBG, the new type 1 diabetes EG rated 98.6% of their measurements as clinically acceptable, compared with 95% for the traditional EG. CONCLUSIONS: The consensus EGs furnish a new tool for evaluating errors in the measurement of BG for patients with type 1 and type 2 diabetes.

Adult↗

Translocation of inserted foreign epitopes by a channel-forming protein.

Certain bacterial protein toxins are able to insert themselves into, and at least partially across, lipid bilayer membranes in the absence of any auxiliary proteins, by using unknown mechanisms to overcome the high energy barrier presented by the hydrophobic bilayer core. We have previously shown that one such toxin, colicin Ia, translocates a large, hydrophilic part of itself completely across a lipid bilayer in conjunction with the formation of an ion-conducting channel. To address the question of whether the colicin can translocate any arbitrary amino acid sequence, we have altered the translocated segment by inserting, singly, two different foreign epitopes. Colicins containing either epitope retain significant bactericidal activity and form channels of normal conductance in planar bilayers. Furthermore, antibodies added on the side of the bilayer opposite that to which the colicin was added interact specifically with the corresponding epitopes, producing an inhibition of channel closing. Thus, the inserted epitopes are translocated along with the rest of the segment, suggesting that a surprisingly small part of colicin Ia, located elsewhere in the molecule, acts as a nonspecific protein translocator.

Amino Acid Sequence↗

Transmembrane insertion of the colicin Ia hydrophobic hairpin.

Colicin Ia is a bactericidal protein that forms voltage-dependent, ion-conducting channels, both in the inner membrane of target bacteria and in planar bilayer membranes. Its amino acid sequence is rich in charged residues, except for a hydrophobic segment of 40 residues near the carboxyl terminus. In the crystal structure of colicin Ia and related colicins, this segment forms an alpha-helical hairpin. The hydrophobic segment is thought to be involved in the initial association of the colicin with the membrane and in the formation of the channel, but various orientations of the hairpin with respect to the membrane have been proposed. To address this issue, we attached biotin to a residue at the tip of the hydrophobic hairpin, and then probed its location with the biotin-binding protein streptavidin, added to one side or the other of a planar bilayer. Streptavidin added to the same side as the colicin prevented channel opening. Prior addition of streptavidin to the opposite side protected channels from this effect, and also increased the rate of channel opening; it produced these effects even before the first opening of the channels. These results suggest a model of membrane association in which the colicin first binds with the hydrophobic hairpin parallel to the membrane; next the hairpin inserts in a transmembrane orientation; and finally the channel opens. We also used streptavidin binding to obtain a stable population of colicin molecules in the membrane, suitable for the quantitative study of voltage-dependent gating. The effective gating charge thus determined is pH-independent and relatively small, compared with previous results for wild-type colicin Ia.

Bacterial Proteins↗

Major transmembrane movement associated with colicin Ia channel gating.

Colicin Ia, a bacterial protein toxin of 626 amino acid residues, forms voltage-dependent channels in planar lipid bilayer membranes. We have exploited the high affinity binding of streptavidin to biotin to map the topology of the channel-forming domain (roughly 175 residues of the COOH-terminal end) with respect to the membrane. That is, we have determined, for the channel's open and closed states, which parts of this domain are exposed to the aqueous solutions on either side of the membrane and which are inserted into the bilayer. This was done by biotinylating cysteine residues introduced by site-directed mutagenesis, and monitoring by electrophysiological methods the effect of streptavidin addition on channel behavior. We have identified a region of at least 68 residues that flips back and forth across the membrane in association with channel opening and closing. This identification was based on our observations that for mutants biotinylated in this region, streptavidin added to the cis (colicin-containing) compartment interfered with channel opening, and trans streptavidin interfered with channel closing. (If biotin was linked to the colicin by a disulfide bond, the effects of streptavidin on channel closing could be reversed by detaching the streptavidin-biotin complex from the colicin, using a water-soluble reducing agent. This showed that the cysteine sulfur, not just the biotin, is exposed to the trans solution). The upstream and downstream segments flanking the translocated region move into and out of the bilayer during channel opening and closing, forming two transmembrane segments. Surprisingly, if any of several residues near the upstream end of the translocated region is held on the cis side by streptavidin, the colicin still forms voltage-dependent channels, indicating that a part of the protein that normally is fully translocated across the membrane can become the upstream transmembrane segment. Evidently, the identity of the upstream transmembrane segment is not crucial to channel formation, and several open channel structures can exist.

Bacterial Proteins↗

Identification of a translocated protein segment in a voltage-dependent channel.

Voltage-gated channels undergo a conformational change in response to changes in transmembrane voltage. Here we use site-directed biotinylation to create conformation-sensitive sites on colicin Ia, a bacteriocidal protein that forms a voltage-sensitive membrane channel, which can be monitored by electrophysiological methods. We investigated a model of gating developed for the partly homologous colicin E1 that is based on the insertion of regions of the protein into the membrane in response to cis-positive voltages. Site-directed cysteine mutagenesis, followed by chemical modification, was used to attach a biotin molecule covalently to a series of unique sites on colicin Ia. The modified protein was incorporated into planar lipid membranes, where the introduced biotin moiety served as a site to bind the water-soluble protein streptavidin, added to one side of the membrane or the other. Our results show that colicin gating is associated with the translocation across the membrane of a segment of the protein of at least 31 amino acids.

Amino Acid Sequence↗

Site-specific biotinylation of colicin Ia. A probe for protein conformation in the membrane.

Channel-forming colicins are Escherichia coli proteins that form voltage-dependent channels in lipid bilayer membranes and are lethal to sensitive strains of E. coli. Experiments with colicin E1 have led to a model of voltage dependence based on the insertion of alpha-helical segments of the protein into the membrane in response to cis-positive voltages. This model was tested on the partly homologous colicin Ia protein, which offers certain advantages over colicin E1 as a model channel, it is active at neutral pH and exhibits comparatively well-defined single channel conductance. We describe here the creation of a specific probe for locating a particular amino acid residue on one side or the other of a planar lipid bilayer membrane, by using the biotin-streptavidin system. Site-directed mutagenesis was used to change lysine 544 of colicin Ia to cysteine. This placed a unique cysteine at a site expected, by homology to colicin E1, to cross the membrane from the cis to the trans side in association with the opening of the channel. This unique cysteine was biotinylated chemically, so that it could serve as a target for streptavidin. Incubation of the biotinylated mutant colicin with streptavidin blocked its killing activity, in vivo; incubation of wild-type colicin, which lacks cysteine, with streptavidin, did not affect its activity. Channels formed by the biotinylated mutant protein in planar lipid bilayers were abolished by streptavidin added to the cis side of the membrane, if the channels were closed, but not if they were open. Trans streptavidin had no effect on either open or closed channels. Thus, when the channel is closed, residue 544 of colicin Ia is accessible to cis streptavidin in the closed state, but the opening of the channel eliminates this accessibility.

Amino Acid Sequence↗

Membrane-permeabilizing activities of Bacillus thuringiensis coleopteran-active toxin CryIIIB2 and CryIIIB2 domain I peptide.

Bacillus thuringiensis toxin CryIIIB2 exhibits activity against two agriculturally important pests, the Colorado potato beetle, Leptinotarsa decemlineata, and the Southern corn rootworm, Diabrotica undecimpunctata. CryIIIB2 shows significant structural similarity to Colorado potato beetle-active toxin CryIIIA, whose crystal structure has been determined elsewhere [J. Li, J. Carrol, and D. J. Ellar, Nature (London) 353:815-821, 1991]. A clone limited to the putative 7-alpha-helical bundle domain I peptide of CryIIIB2 was constructed by PCR. The truncated protein was expressed at high levels in Escherichia coli. Domain I peptide was isolated and compared with native CryIIIB2 toxin in promoting ion efflux from synthetic phospholipid vesicles and formation of ion channels in black lipid membranes. The results showed that CryIIIB2 domain I peptide is sufficient for ion channel formation and promotes ion efflux. Both native CryIIIB2 toxin and domain I peptide were inefficient channel-forming proteins that produced noisy ion channels of various conductance states. In ion efflux assays, native toxin promoted greater ion efflux from synthetic vesicles than did the truncated peptide.

Animals↗

Ion channel activity of N-terminal fragments from CryIA(c) delta-endotoxin.

Proteolytically-derived amino-terminal fragments from the Bacillus thuringiensis delta-endotoxin, CryIA(c), demonstrated ion channel activity in two in vitro assays in the absence of any membrane receptors. A 24.5 kDa fragment (from Spodoptera frugiperda digestive proteolysis) formed cation-selective channels (10mV for a 3:1 salt gradient) in planar lipid bilayers up to several hundred picoSiemen conductance. A 21.5 kDa fragment doublet (from alkaline hydrolysis) also showed large conductance in planar lipid bilayers and resulted in nearly 2-fold greater 86Rb(+)-K+ efflux from phosphatidylcholine vesicles than 55 kDa CryIA(c). In preliminary screening bioassays, however, the 21.5 kDa fragments showed no insecticidal activity toward neonate Heliothis virescens. Ion channel activity of these putative alpha-helical region fragments support this region being responsible for ion channel properties of the parent delta-endotoxin.

Animals↗

Identification of a translocated gating charge in a voltage-dependent channel. Colicin E1 channels in planar phospholipid bilayer membranes.

The availability of primary sequences for ion-conducting channels permits the development of testable models for mechanisms of voltage gating. Previous work on planar phospholipid bilayers and lipid vesicles indicates that voltage gating of colicin E1 channels involves translocation of peptide segments of the molecule into and across the membrane. Here we identify histidine residue 440 as a gating charge associated with this translocation. Using site-directed mutagenesis to convert the positively charged His440 to a neutral cysteine, we find that the voltage dependence for turn-off of channels formed by this mutant at position 440 is less steep than that for wild-type channels; the magnitude of the change in voltage dependence is consistent with residue 440 moving from the trans to the cis side of the membrane in association with channel closure. The effect of trans pH changes on the ion selectivity of channels formed by the carboxymethylated derivative of the cysteine 440 mutant independently establishes that in the open channel state, residue 440 lies on the trans side of the membrane. On the basis of these results, we propose that the voltage-gated opening of colicin E1 channels is accompanied by the insertion into the bilayer of a helical hairpin loop extending from residue 420 to residue 459, and that voltage-gated closing is associated with the extrusion of this loop from the interior of the bilayer back to the cis side.

Base Sequence↗

A T. cruzi-secreted protein immunologically related to the complement component C9: evidence for membrane pore-forming activity at low pH.

Protozoan parasite T. cruzi invades cells within acidic vacuoles, but shortly afterward escapes into the cytosol. Exit from the phagosome is blocked by raising the pH of acidic compartments, suggesting that a previously described acid-active hemolysin secreted by T. cruzi might be involved in the membrane disruption process. Here we show that T. cruzi supernatants are cytotoxic for nucleated cells at pH 5.5 and contain a protein reactive with antibodies against reduced and alkylated human C9 (the ninth component of complement). The C9 cross-reactive protein (TC-TOX) copurified with the cytolytic activity, and the active fractions induced conductance steps characteristic of transmembrane ion channels in planar phospholipid bilayers. Immunocytochemical studies using antibodies against purified TC-TOX showed that the protein was localized to the luminal space of parasite-containing phagosomes. We postulate that TC-TOX, when secreted into the acidic environment of the phagosome, forms pores in the membrane, which contribute to its disruption.

Animals↗

Delta-endotoxins form cation-selective channels in planar lipid bilayers.

Delta-endotoxins CryIA(c) and CryIIIA, two members of a large family of toxic proteins from Bacillus thuringiensis, were each allowed to interact with planar lipid bilayers and were analyzed for their ability to form ion-conducting channels. Both of these toxins made clearly resolved channels in the membranes and exhibited several conductance states, which ranged from 200 pS to about 4000 pS (in 300 mM KCl). The channels formed by both toxins were highly cation-selective, but not ideally so. The permeability ratio of K+ to Cl- was about 25 for both channels. The ability of these proteins to form such channels may account for their toxic action on sensitive cells, and suggests that this family of toxins may act by a common mechanism.

Bacillus thuringiensis↗

Alteration of the pH-dependent ion selectivity of the colicin E1 channel by site-directed mutagenesis.

Colicin E1 is a soluble, bacteriocidal protein that forms voltage-gated channels in planar lipid bilayers. The channel-forming region of the 522-amino acid protein is near the COOH terminus, and contains a 35-amino acid hydrophobic segment which is presumed to be important in interacting with the membrane. We have used site-directed mutagenesis in the region immediately upstream from the hydrophobic segment to construct several functional colicin mutants in which a wild-type residue was replaced with a cysteine. We also replaced the only naturally occurring cysteine in the molecule, Cys-505, with alanine, so that synthetically introduced cysteines could unambiguously serve as targets for chemical modification. All of the replacements reported here (at positions 449, 459, 473, 505, and some combinations) resulted in a channel that had an ion selectivity (K+ versus Cl-) identical to wild type at low pH. At higher pH, however, one of these mutations, which replaced the negatively charged aspartate at position 473 (the upstream boundary of the hydrophobic segment), resulted in a channel that was less cation-selective than was wild type. When the introduced Cys-473 was reacted with iodoacetic acid, which inserted a COOH group close to the position of the missing aspartate COOH, wild-type ion selectivity was restored, suggesting that the greater cation selectivity of the wild-type channel was directly produced by the negative charge at Asp-473. By comparing the ion selectivity of the Cys-473 mutant channel to that of the wild type as a function of the pH on the cis and trans sides of the membrane, it was possible to locate residue 473 close to the cis side. Locating in this manner the positions in the channel of particular residues places important constraints on channel model building.

Amino Acid Sequence↗

Colicin E1 in planar lipid bilayers.

The channel formed by the C-terminal domain of colicin E1 in planar lipid bilayers has proven to be more complex than one might have guessed for such a simple system. The protein undergoes a pH-dependent rearrangement which transforms it from a water soluble form to a much different membrane bound form. There are at least two bound states which don't form a channel. The process by which the channel opens and closes is regulated by the pH and the transmembrane voltage. The voltage is probably sensed by at least 3 (and more likely 4 or more) lysine residues which must be driven through the field to open the channel. The process appears to be hindered by particular carboxyl groups when they are in the unprotonated state. The open channel has several substates and several superstates. Very large positive voltage catalyzes a transition of the open channel to an inactivated state, and may be able to drive the channel-forming region of the protein across the membrane. Little is known about the structure of any of these states, but the open channel is large enough to allow NAD to traverse the membrane and appears to be formed by one colicin molecule. This single polypeptide mimics many of the properties found in channels of mammalian cell membranes, but it may prove more relevant as a model for the transport of proteins across membranes. The comparative ease with which the protein can be manipulated chemically and genetically, along with the complexity of its behavior, promises to keep several laboratories busy for some time.

Colicins↗

Gating of a voltage-dependent channel (colicin E1) in planar lipid bilayers: the role of protein translocation.

The voltage-dependent channel formed in planar lipid bilayers by colicin E1, or its channel-forming C-terminal fragments, is susceptible to destruction by the nonspecific protease pepsin under well-defined conditions. In particular, pepsin acts only from the cis side (the side to which colicin has been added) and only upon channels in the closed state. Channels in the open state are refractory to destruction by cis pepsin, and neither open nor closed channels are destroyed by trans pepsin. Colicin E1 channels are normally turned on by cis positive voltages and turned off by cis negative voltages. For large (greater than 80 mV) positive voltages, however, channels inactivate subsequent to opening. Associated with the inactivated state, some channels become capable of being turned on by cis negative voltages and turned off by cis positive voltages, as if the channel-forming region of the molecule has been translocated across the membrane. Consistent with this interpretation is the ability now of trans pepsin to destroy these "reversed" channels when they are closed, but not when they are open, whereas cis pepsin has no effect on them in either the open or closed state. Our results indicate that voltage gating of the E1 channel involves translocation of parts of the protein across the membrane, exposing different domains to the cis and trans solutions in the different channel states.

Alkanes↗

Gating of a voltage-dependent channel (colicin E1) in planar lipid bilayers: translocation of regions outside the channel-forming domain.

C-terminal fragments of colicin E1, ranging in mol wt from 14.5 to 20 kD, form channels with voltage dependence and ion selectivity qualitatively similar to those of whole E1, placing an upper limit on the channel-forming domain. Under certain conditions, however, the gating kinetics and ion selectivity of channels formed by these different E1 peptides can be distinguished. The differences in channel behavior appear to be correlated with peptide length. Enzymatic digestion with trypsin of membrane-bound E1 peptides converts channel behavior of longer peptides to that characteristic of channels formed by shorter fragments. Apparently trypsin removes segments of protein N-terminal to the channel-forming region, since gating behavior of the shortest fragment is little affected by the enzyme. The success of this conversion depends on the side of the membrane to which trypsin is added and on the state, open or closed, of the channel. Trypsin modifies only closed channels from the cis side (the side to which protein has been added) and only open channels from the trans side. These results suggest that regions outside the channel-forming domain affect ion selectivity and gating, and they also provide evidence that large protein segments outside the channel-forming domain are translocated across the membrane with channel gating.

Colicins↗