PubMed Health⌕ Search

Biomedical subjects

S N Gorb

Publications and source records attributed to S N Gorb.

9 recordsLinked to original sources
PubMed2006

Physicochemical properties of functional surfaces in pitchers of the carnivorous plant Nepenthes alata Blanco (Nepenthaceae).

Pitchers of the carnivorous plant Nepenthes alata are highly specialized organs adapted to attract, capture, and digest animals, mostly insects. They consist of several well distinguishable zones, differing in macro-morphology, surface microstructure, and functions. Since physicochemical properties of these surfaces may influence insect adhesion, we measured contact angles of non-polar (diiodomethane) and polar liquids (water and ethylene glycol) and estimated the free surface energy of 1) the lid, 2) the peristome, 3) the waxy surface of the slippery zone, and 4) the glandular surface of the digestive zone in N. alata pitchers. As a control, the external surface of the pitcher, as well as abaxial and adaxial surfaces of the leaf blade, was measured. Both leaf surfaces, both lid surfaces, and the external pitcher surface showed similar contact angles and had rather high values of surface free energy with relatively high dispersion component. These surfaces are considered to support strong adhesion forces based on the capillary interaction, and by this, to promote successful attachment of insects. The waxy surface is almost unwettable, has extremely low surface energy, and therefore, must essentially decrease insect adhesion. Both the peristome and glandular surfaces are wetted readily with both non-polar and polar liquids and have very high surface energy with a predominating polar component. These properties result in the preclusion of insect adhesion due to the hydrophilic lubricating film covering the surfaces. The obtained results support field observations and laboratory experiments of previous authors that demonstrated the possible role of different pitcher surfaces in insect trapping and retention.

Animals↗
PubMed2004

Frictional properties of contacting surfaces in the hemelytra-hindwing locking mechanism in the bug Coreus marginatus (Heteroptera, Coreidae).

The structure and function of the hemelytra-to-hindwing locking mechanism of the bug Coreus marginatus were analysed. The system consists of a cuticular protrusion in the ventral side of the hemelytra, which locks the subcostal border of the hindwing in flight. The speed and distance slid by both surfaces against one another during flight were assessed using a combination of high-speed video recordings and a 2D geometrical model. The friction coefficient between sliding surfaces was assessed using a micromanipulator, coupled with force transducers. This was done under three experimental conditions: freshly dissected, air dried and rehydrated ethanol preserved samples. The results showed a high speed of sliding, approximately 0.18 m s(-1), with a relatively low friction coefficient (0.2 micro). There was no evident difference in the friction measured under the various treatments, with the exception of the rehydrated condition, which was lower. The surface morphology of the wing locking mechanism, namely outgrowths of one part having rounded edges, and completely flat surface on the counterpart, effectively aids in the reduction of friction at the microscopic level. The structure is effective even dry, and after being preserved in ethanol, suggesting that no cuticle secreted lubrication substance is responsible for its effectiveness. The ultrastructure presumably confers mechanical stability to the system under the high load it is subjected to in flight.

Animals↗
PubMed2003

Attachment forces of the hemelytra-locking mechanisms in aquatic bugs (Heteroptera: Belostomatidae).

Combined hemelytra-locking system of Heteroptera, consisting of several locking mechanisms, aids the mechanical stabilisation of the body at rest, resists external loads, and keeps air stored with the option to easily unlock hemelytra prior to flight. The resistance to unlocking of the hemelytron was measured (in mN) with the aid of a load cell force transducer combined with a three-axial micromanipulator. It is shown that macro- and microstructural features of several submechanisms are responsible for their directionality. The highest resistance to unlocking was measured in lateral and dorsal directions. Summarised force of separately measured submechanisms was considerably lower than the force measured in the combined mechanism. Each submechanism is optimised for achieving high resistance to the hemelytron uncoupling in particular direction(s) and to be easily unlocked in another direction. It was demonstrated in the high-speed videorecordings that hemelytra uncoupling is promoted by their short anterior displacement.

Animals↗
PubMed2002

Probabilistic fasteners with parabolic elements: biological system, artificial model and theoretical considerations.

Probabilistic fasteners are attachment devices composed of two surfaces covered with cuticular micro-outgrowths. Friction-based fasteners demonstrate high frictional forces when the surfaces come into contact. Attachment in this case is based on the use of the surface profile and mechanical properties of materials, and is fast, precise and reversible. The best-studied examples composed of parabolic elements are the wing-locking mechanism in beetles and the head arrester in dragonflies. This study combines experimental data of force measurements, obtained in an artificial model system, and theoretical considerations based on the simple model of behaviour of probabilistic fasteners with parabolic elements. Elements of the geometry in both cases correspond to the biological prototypes. Force measurements on the artificial system show that the attachment force is strongly dependent on the load force. At small loads, the increase of attachment is very slow, whereas rapid increase of attachment was detected at higher loads. At very high loads, a saturation of the attachment force was revealed. A simple explanation of the attachment principle is that with an increasing load elements of both surfaces slide into gaps of the corresponding part. This results in an increase of lateral loading forces acting on elements. High lateral forces lead to an increase of friction between single sliding elements. An analytical model which describes behaviour of the probabilistic fasteners with parabolic elements is proposed.

Animals↗
PubMed2001

Evolution of locomotory attachment pads of hexapods.

This study shows that, in their evolution, hexapods have convergently developed two distinctly different mechanisms to attach themselves to a variety of substrates during locomotion. The first mechanism is provided by hairy surfaces and the second one by smooth flexible pads. The main similarity of both mechanisms is that the structured pad surface or particular properties of pad materials guarantee a maximum real contact with diverse substrata, regardless of their microsculpture. Ten characters of the two alternative designs were coded and analyzed together with a data matrix containing 105 additional morphological characters of different stages and body parts. The analysis demonstrates that similar structures (arolium, euplantulae, hairy tarsomeres) have evolved independently in several hexapod lineages. The evolution of flight and the associated necessity of being able to cling to vegetation or other substrates are suggested to be major triggers for the evolution of attachment structures.

Animals↗
PubMedDate not supplied

Porous channels in the cuticle of the head-arrester system in dragon/damselflies (Insecta:Odonata).

The ultrastructure of the porous channels (PC) of the postcervical sclerite (SPC), which provides additional head fixation to the neck in adult odonates, was studied using TEM and high resolution SEM microscopy. Single chitin-protein microfibrils, about 0.14 micron thick, are arranged into channels with cylinder-like shapes. The axial rod of the chitin fiber (0.04 micron thick) is located in the center of the cylinder. The orientation of the axial rods was three-dimensionally demonstrated after dissolving the protein cover with NaOH. The PCs are arranged vertically to the surface and pass from the epidermal cells through all the cuticular layers to the surface of the cuticle. In the exo- and endocuticle, the PCs are usually oval in cross-section and about 0.3 micron thick. In the endocuticle, the cross-sectional area of the PCs varies widely, from 0.01-0.15 micron2. The shape of the PC is determined by the macromolecular organization of the chitin-protein microfibrils: the long axis of the channel is orientated parallel to the axis of the preferred orientation of the cuticular microfibrils. The microfibrils tend to follow the line of the channel very closely. In fractures orientated perpendicular to the surface, the PC resembles a ribbon-like construction, which was clearly demonstrated by casts. The strongly parallel orientation of PCs in the deep layers of the cuticle changes within the microtrichia (MT), and they begin to be curved. Numerous PCs pass through the microtrichium, and most of them end on its side wall. PCs usually contain channel filaments about 0.09 micron thick. Usually, a single channel contained one filament, but channels located in the deep layers of the endocuticle have from one to five single filaments. The filaments were observed in the intact cuticle and in the cuticle enzymatically treated with chitinase, while in the cuticle treated with NaOH filaments were absent. The porous channel system of the odonate arrester is interpreted as a device transporting adhesive excretions from the epidermal cells to the cuticular surface.

Animals↗
PubMedDate not supplied

[Effect of parameters of myrmecochorous syndrome on rates of removal of Corydalis cava and Pulmonaria obscura by Formica polyctena ants].

Complex of adaptations of myrmecochorous plants to the ant dispersal composes so called myrmecochorous syndrome. To study the effect of some morphological and anatomical adaptations on diaspore attractiveness for ants, the field experiments with diaspores and their extracts were carried out. It was shown that chemical cues attracting ants are located in different parts of diaspores: in elaiosome only (C. cava) or in elaiosome, coverage of external layer of the fruit and in the fruit collar (P. obscura). Anatomy of adaptive structure of diaspores is also discussed together with the results of field experiments.

Animals↗
PubMedDate not supplied

[Myrmecochorous syndrome].

Myrmecochorous plants have a set of morphological, anatomical, biochemical and phenological features connected to ant dispersal. This complex of plant adaptations is called myrmecochorous syndrome. Present review is based on literature data and original field and laboratory experiments of the authors. The diversity of plant adaptations and its role for ant attraction are analysed. The main feature of myrmecochorous syndrome is elaiosome (a fat body) connected with diaspore. Elaisomes differ by shape, colours, size, anatomy and origin. Different parts of ovule, pericarp or even flower may serve as an initial tissue for elaiosome origin. Fats of elaiosome have a particular complex of fat acids, mainly 1,2-diolein, that attract ant workers. Seed setting periods, synchronizing with maximum ant activity, strictly determined size of diaspores also help in ant attraction. If a plant is not obligate myrmecochore and has some additional mechanism for diaspore dispersal, some characters of myrmecochorous syndrome may be absent or less expressed.

Plant Physiological Phenomena↗