Biomedical subjects

S Pinzauti

Publications and source records attributed to S Pinzauti.

At least 19 recordsLinked to original sources

PubMed2005

Interaction of naproxen with ionic cyclodextrins in aqueous solution and in the solid state.

The possible role of the cyclodextrin charge in the interaction with an acidic drug such as naproxen (pKa 4.8) has been evaluated. Sulfobutylether-beta-cyclodextrin (SBE-betaCyd) and trimethylammonium-beta-cyclodextrin (TMA-betaCyd) were selected as, respectively, anionically and cationically charged carriers and their performance was compared with that of the parent beta-cyclodextrin (betaCyd) and of its methyl-derivative (Me betaCyd) previously found as the best partner for the drug. Interactions in solution were investigated by phase-solubility, fluorescence and circular dichroism analyses. Equimolar drug-carrier products prepared by different techniques (blending, cogrinding, sealed-heating, colyophilization) were characterized by differential scanning calorimetry and X-ray powder diffractometry and tested for drug dissolution properties. Anionic charges of SBE-betaCyd did not negatively influence interactions in unbuffered aqueous solutions (pH approximately 5) with the acidic drug. In fact, it was a very effective carrier, exhibiting solubilizing and complexing properties considerably better than the parent betaCyd and comparable to those of Me betaCyd. On the contrary, the positive charges of TMA-betaCyd did not favour interactions with the counter-ionic drug (despite the presence of about 60% ionised drug) and it was less efficacious also than native betaCyd. Therefore, the role of the Cyd charge on the complexing and solubilizing properties towards naproxen was not important whereas other factors, such as steric hindrance effects and favourable hydrophobic interactions were significant in determining the drug affinity for the Cyd inclusion. Solid state studies evidenced similar amorphizing properties of both charged Cyds towards naproxen. On the other hand, dissolution tests, in agreement with solution studies, showed that all products with SBE-betaCyd exhibited significantly better dissolution properties than the corresponding ones with TMA-betaCyd. A clear influence of the preparation method of drug-Cyd solid systems on the performance of the end product was also observed. Colyophilization was the most effective technique, followed by the cogrinding one. Colyophilized product with SBE-betaCyd allowed a 10-times increase in drug dissolution efficiency (D.E.) (with respect to the five-times increase obtained with the corresponding coground product) and a reduction of t(50%) from about 60 min (for the coground product) to less than 2 min.

Cyclodextrins↗

PubMed2005

Determination of stability constant values of flurbiprofen-cyclodextrin complexes using different techniques.

Three new experimental approaches for calculating the stability constant (K(st)) of complexes of flurbiprofen with natural beta-cyclodextrin (betaCyd) and the hydroxyethyl- (HEbetaCyd) and the methyl- (Me betaCyd) derivatives were tested and compared to the classic phase-solubility procedure: (a) the membrane permeation technique through a lipophilic synthetic membrane permeable to the drug but not to the Cyd molecules, by analysing the permeation profiles with a non-linear least-squares method; (b) the affinity capillary electrophoresis (ACE) technique, where K(st) were calculated from the relationship between Cyd concentration in solution and drug electrophoretic mobility, using three different linear plotting methods; (c) the molecular modeling technique, based on the relationship between the docking energies and the experimental K(st) values. The study allowed evaluation of the advantages and limits of each examined method, providing a useful guide for the choice of the most suitable one depending on the kind of host-guest system to be investigated. The K(st) values obtained with the various techniques were rather different, probably due to the very different experimental conditions required by each one. However, all the methods indicated the methyl-derivative as the most powerful complexing agent for the drug, showing the general trend: K(st)(Me betaCyd)>>K(st)(HEbetaCyd)>K(st)(betaCyd). Only in the case of the ACE method was an inversion of the trend found between HEbetaCyd and betaCyd; this was probably due to the lower molecular weight of the natural Cyd, which, in this case, became more important in determining the complex electrophoretic mobility than the different affinity of the drug for these two Cyds.

Chemistry, Pharmaceutical↗

PubMed2005

Optimization of glibenclamide tablet composition through the combined use of differential scanning calorimetry and D-optimal mixture experimental design.

A systematic analysis of the influence of different proportions of excipients on the stability of a solid dosage form was carried out. In particular, a d-optimal mixture experimental design was applied for the evaluation of glibenclamide compatibility in tablet formulations, consisting of four classic excipients (natrosol as binding agent, stearic acid as lubricant, sorbitol as diluent and cross-linked polyvinylpyrrolidone as disintegrant). The goal was to find the mixture component proportions which correspond to the optimal drug melting parameters, i.e. its maximum stability, using differential scanning calorimetry (DSC) to quickly obtain information about possible interactions among the formulation components. The absolute value of the difference between the melting peak temperature of pure drug endotherm and that in each analysed mixture and the absolute value of the difference between the enthalpy of the pure glibenclamide melting peak and that of its melting peak in the different analyzed mixtures, were chosen as indexes of the drug-excipient interaction degree.

Calorimetry, Differential Scanning↗

PubMed2004

Micellar electrokinetic chromatography for the simultaneous determination of ketorolac tromethamine and its impurities. Multivariate optimization and validation.

A simple, fast and selective micellar electrokinetic chromatographic (MEKC) method for the simultaneous assay of ketorolac tromethamine and its known related impurities (1-hydroxy analog of ketorolac, 1-keto analog of ketorolac and decarboxylated ketorolac), in both drug substance and coated tablets, is described. The compounds were detected at 323 nm, and flufenamic acid (FL) and tolmetin (TL) were chosen as internal standards to quantify ketorolac tromethamine and impurities, respectively. The multivariate optimization of the experimental conditions was carried out by means of the response surface study, considering as responses the resolution values and analysis time. The optimized background electrolyte (BGE) consisted of a mixture of 13 mM boric acid and phosphoric acid, adjusted to pH 9.1 with 1 M sodium hydroxide, containing 73 mM sodium dodecyl sulfate (SDS). Optimal temperature and voltage were 30 degrees C and 27 kV. Applying these conditions, all compounds were resolved in about 6 min. The related substances could be quantified up to the 0.1% (w/w) level. Validation was performed, either for drug substances and drug product, evaluating selectivity, robustness, linearity and range, precision, accuracy, detection and quantitation limits and system suitability.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2003

How experimental design can improve the validation process. Studies in pharmaceutical analysis.

A critical discussion about the possibility of improving the method validation process by means of experimental design is presented. The reported multivariate strategies concern the evaluation of the performance parameters robustness and intermediate precision, and the optimisation of bias and repeatability. In particular, accuracy and precision improvement constitutes a special subset of experimental design in which the bias and the relative standard deviation of the assay are optimised. D-optimal design was used in order to plan experiments for this aim. The analytical methods considered were capillary electrophoresis, HPLC, adsorptive stripping voltammetry and differential pulse polarography. All methods were applied to real pharmaceutical analysis problems.

Adsorption↗

PubMed2003

Optimization of dissolution test precision for a ketoprofen oral extended-release product.

An example of application of experimental design methodologies to the set up of dissolution test conditions for a new ketoprofen oral extended-release dosage form is presented. The aim of the work was to find the best experimental conditions, using a USP apparatus 2 (paddle), for maximizing the method precision as degree of repeatability. The considered factors mainly influencing the dissolution test results were pH and volume of dissolution medium, and paddle stirring speed. Two distinct 4-run Plackett-Burman designs were carried out: one at gastric and the other at intestinal pH values. Each run was performed in triplicate in order to calculate the standard deviations of the drug dissolution efficiency at 60 and 120 min, selected as responses to be minimized. Optimum conditions to carry out the dissolution test were: 900 ml volume of dissolution medium and 70 rpm paddle stirring speed for both environments and pH 1 and 5.5, for the gastric and intestinal environment, respectively.

Administration, Oral↗

PubMed2002

Characterization of physicochemical properties of naproxen systems with amorphous beta-cyclodextrin-epichlorohydrin polymers.

Ground mixtures of naproxen with amorphous beta-cyclodextrin-epichlorohydrin soluble (betaCd-EPS) or insoluble cross-linked (betaCd-EPI) polymers were investigated for both solid phase characterization (Differential Scanning Calorimetry, powder X-ray Diffractometry) and dissolution properties (dispersed amount method). The effect of different grinding conditions and of drug-to-carrier ratio was also evaluated. Co-grinding induced a decrease in drug crystallinity to an extent which depended on the grinding time, and was most pronounced for the cross-linked insoluble polymer, particularly in combinations at the lowest drug content. Both cyclodextrin polymers were more effective in improving the naproxen dissolution properties, not only than the parent betaCd but also than hydroxyalkyl-derivatives, and their performance was almost comparable to that of methyl-derivatives, previously found as the best carriers for naproxen. Dissolution efficiencies of naproxen from physical mixtures with betaCd-EPS, thanks to the high water solubility of this Cd-derivative, were up to three times higher than those from the corresponding products with betaCd-EPI. However this difference in their performance became much less evident in co-ground products and tended to progressively diminish with increasing the polymer content in the mixture, according to the better amorphizing power shown by betaCd-EPI during the co-grinding process. The 10/90 (w/w) drug-carrier co-ground products exhibited the best dissolution properties, giving dissolution efficiencies about 30 times higher than that of naproxen alone.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2002

Optimization and validation of a CZE method for rufloxacin hydrochloride determination in coated tablets.

A simple and rapid capillary electrophoresis method with UV detection was developed and validated for the determination of rufloxacin hydrochloride in coated tablets. An experimental design strategy (Doehlert design and desirability function) allowed the analytical parameters to be simultaneously optimized in order to determine rufloxacin hydrochloride with high peak area/migration time ratio, good efficiency and short analysis time. Optimized analyses were run using boric acid 0.10 M adjusted to pH 8.8 as BGE and setting voltage and temperature at 18 kV and 27 degrees C, respectively. Pefloxacin mesylate was used as internal standard and run time was about three minutes. The method was validated for the drug substance and the drug product according to the ICH3 guidelines. Robustness was tested by experimental design using an eight-run Plackett-Burman matrix.

Anti-Infective Agents↗

PubMed2001

Improving gas chromatographic determination of residual solvents in pharmaceuticals by the combined use of headspace solid-phase microextraction and isotopic dilution.

Cyclohexane and toluene were gas chromatographically determined via headspace solid-phase microextraction both in ketoprofen drug substance and ketoprofen capsules by a procedure relying on isotopic dilution (ID), an analytical tool derived from mass spectrometry (MS). This approach, using an internal standard method, gave mean precision and accuracy (RSD 2.56%, 2.97% and bias 0.21%, -0.99% for cyclohexane and toluene, respectively) not obtainable by the more commonly used external standard ones in the presence of real sample matrices. Optimisation of the operative conditions was also supported by experimental design. More generally, the proposed method, exploiting ID without resort to the costly MS instrumentation, could be recommended whenever opportune deuterated analogues of the target analytes and GC capillary columns able to separate all the peaks involved are ready available on the market.

Calibration↗

PubMed2001

Optimisation and validation of a capillary electrophoresis method for the simultaneous determination of diazepam and otilonium bromide.

A simultaneous assay of diazepam and otilonium bromide in coated tablets by capillary zone electrophoresis (CZE) was developed. The influence of various parameters (voltage, temperature, buffer concentration and pH, ethanol percentage) on analysis time and on the theoretical plates of the two peaks was investigated by means of experimental design. A response surface study was carried out by means of a 27-run D-optimal matrix. The best background electrolyte was found to be 0.13 M, pH 2.9 Britton-Robinson buffer, containing 10% v/v ethanol. Other optimised parameters were voltage (30 kV) and temperature (30 degrees C). The UV detector for quantitation of otilonium bromide and diazepam was set at 280 nm and 230 nm, respectively. Procaine hydrochloride was used as internal standard and run time was less than five minutes. Validation was performed, for drug substance and drug product, according to ICH3 guidelines. For drug product the recovery for otilonium bromide and diazepam ranged from 98.3% to 101.2% and from 97.1% to 99.0%, respectively; the RSD values found for otilonium bromide and diazepam ranged from 2.4% to 3.0% and from 1.1% to 4.5%, respectively.

Calcium Channel Blockers↗

PubMed2000

Design of experiments for capillary electrophoretic enantioresolution of salbutamol using dermatan sulfate.

Statistical experimental design was used for the optimization and for robustness evaluation of a capillary electrophoretic method developed for the enantioresolution of salbutamol. Dermatan sulfate was used as chiral selector. The goal of the study was to obtain an efficient and fast separation. An eight-run Plackett-Burman matrix was used during the optimization process for the screening of the factors and to adjust the experimental domain under study. Response surface methodology was adopted after the screening phase to obtain information about how the factors percentage of chiral selector, pH and voltage affected the considered responses resolution and analysis time. The Derringer desirability function, which makes it possible to combine results obtained for properties measured on different scales, was used to simultaneously optimize the two responses. Robustness testing was carried out using a Plackett-Burman matrix. The method was found robust as regards the response resolution while voltage and chiral selector were found to be critical factors for the robustness of analysis time response. The proposed CE method permitted the complete enantioseparation of racemic salbutamol and was applied to its chiral resolution in spiked urine samples.

Adrenergic beta-Agonists↗

PubMed1999

Influence of the preparation method on the physicochemical properties of ketoprofen-cyclodextrin binary systems.

Binary systems of ketoprofen with native crystalline beta-cyclodextrin and amorphous statistically substituted methyl-beta-cyclodextrin were investigated for both solid phase characterization (Differential Scanning Calorimetry, powder X-ray diffraction, Infrared Spectroscopy, Scanning Electron Microscopy) and dissolution properties (dispersed amount and rotating disc methods). Grinding, kneading, sealed-heating and colyophilization of equimolar combinations of ketoprofen with methyl-beta-cyclodextrin, as well as colyophilization of analogous combinations with beta-cyclodextrin, led to amorphous products. Crystalline drug, instead, was still clearly detectable in coground, kneaded and sealed-heated products with beta-cyclodextrin. Both the preparation method, and even more the nature of the carrier, played an important role in the performance of the system. Colyophilized and sealed-heated products showed the best dissolution properties. However, independently of the preparation technique, all combinations with methyl-beta-cyclodextrin yield better performances than the corresponding ones with the beta-cyclodextrin. Moreover, intrinsic dissolution rate of ketoprofen from simple physical mixture with the beta-cyclodextrin derivative was even five-fold higher than that from the best product with the parent beta-cyclodextrin.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed1998

Development and validation of a differential pulse polarographic method for quinolinic acid determination in human plasma and urine after solid-phase extraction: a chemometric approach.

A chemometric approach was applied for determining quinolinic acid in human plasma by differential pulse polarography after solid phase extraction. A fractional factorial design was used to examine the significant experimental variables for the peak height maximization. A Doehlert design, which allowed a sequential response surface methodology to be performed, was applied to the variables scan rate and drop size. The results indicated that the scan rate had the greatest effect on the response peak height. The linear range was extended from 8.52 x 10(-8) to 1.34 x 10(-5) M and the limit of detection was 2.9 x 10(-8) M. The validation process consisted of a pre-validation study followed by the main validation in the plasma matrix. The robustness and the intermediate precision were evaluated by means of experimental design. A 3(4)//9 screening symmetric matrix and a central composite design were used to optimize the solid phase extraction procedure of the analyte from human plasma using anion exchange cartridges. The goal was to select the best retention, wash and elution solvents and their volumes in order to maximize the extraction efficiency using as the response the polarographic peak height. An extraction efficiency of 90% was found. The method was also applied to the determination of quinolinic acid in urine and the mean concentration in human plasma and urine, was found to be 3.7 x 10(-7) and 4.9 x 10(-5) M respectively.

Chemistry Techniques, Analytical↗

PubMed1998

Set-up and validation of an adsorptive stripping voltammetric method for kynurenic acid determination in human urine.

Validation of an adsorptive stripping voltammetric method for kynurenic acid determination in urine, was presented. The selection of appropriate validation parameters, the design consideration for evaluation and the problem of endogenous metabolites were discussed. The considered fundamental criteria for assessing the reliability and overall performance of the method in the urine matrix were selectivity, linearity and range, limit of quantitation, accuracy, precision and analyte stability. The intermediate precision was also evaluated by means of a full factorial design. An HPLC method with fluorimetric detection was used as a reference method to assess the accuracy. The analysis in urine required a pH control as pointed out by robustness testing and the found kynurenic acid concentration in daily urine ranged from 5 to 40 microM.

Adsorption↗

PubMed1998

Thermal analysis as a screening technique in preformulation studies of picotamide solid dosage forms.

The potential compatibilities of several commonly used pharmaceutical excipients with picotamide were evaluated using differential scanning calorimetry (DSC). The effects of aging and of mechanical treatment (blending, grinding, or kneading) of samples were also evaluated. Hot-stage microscopy (HSM) and scanning electron microscopy (SEM) were used as complementary techniques to implement and assist in interpretation of the DSC results. DSC analysis evidenced a noticeable modification of drug thermal features in the mixtures with palmitic acid, stearic acid, stearyl alcohol, polyethylene glycol (PEG) 20,000, and sorbitol, but HSM analysis showed that the DSC behavior was mainly because of the drug dissolution in the melted excipient, which allowed the presence of important solid-solid interactions to be excluded. Compatibility with Mg stearate was also found, even if sample manipulation induced the partial conversion of Mg stearate in a pseudo-polymorphic modification. Mechanical stress displayed an increased hygroscopicity of mixtures with glucose and lactose, as well as some solid-solid interactions with lactose and mannitol.

Calorimetry, Differential Scanning↗

PubMed1997

Experimental design strategies in the optimization and robustness testing of adsorptive stripping voltammetric conditions for kynurenic acid determination.

Experimental design was used for the optimization and robustness testing of an adsorptive stripping voltammetric procedure for kynurenic acid determination. The optimization of the peak height response proceeded through a screening phase (D-optimal design strategy) followed by a response surface study (Doehlert design) applied to the variables pH, pulse amplitude and stirring rate. An interaction between pH and stirring rate was pointed out. The optimized method was validated and the variation of factors that was expected to occur in practice was simulated in a robustness test. A composite fractional matrix for the evaluation of method robustness was used and pH emerged as the only critical factor. The linear range found applying the optimized conditions was 2.5 x 10(-9) to 2.5 x 10(-7) M and the calculated limit of detection was 1.72 x 10(-9) M.

Adsorption↗

PubMed1996

Experimental design in the development of voltammetric method for the assay of omeprazole.

A multivariate strategy was used to optimize an adsorptive stripping voltammetric method for the determination of the antiulcer drug omeprazole. A 3/4 matrix was used for the variable screening while a central composite design was chosen in the subsequent step to evaluate the response surfaces. Simultaneous optimization of the response peak height (hp) and peak half width w1/2), the latter being a peak shape measure, was achieved. The factors accumulation time, pulse amplitude, scan rate and stirring rate were all found to be statistically significant for the response hp, while for the response w1/2 only the stirring rate was found to be significant. The optimized method shows a good linearity between peak height and analyte concentration in the concentration range from 8.33 x 10(-9) M to 1.42 x 10(-7) M with a LOD of 6.5 x 10(-9) M. The mean recovery of omeprazole in capsules was 101.9% with a SD of 2.04 (RSD = 200).

Adsorption↗

PubMed1995

Design and optimization of the variables in the adsorptive stripping voltammetric determination of rufloxacin in tablets, human plasma and urine.

An adsorptive stripping voltammetric method with a hanging mercury drop electrode was developed for the determination of the fluoroquinolone rufloxacin in tablets, human plasma and urine. Measurements were obtained in differential pulse mode and a multivariate strategy was used to optimize the variables involved. Besides the independent effects of the variables, a strong interaction between scan rate and pulse duration has been found. Rufloxacin was analysed at concentrations between 1.7 x 10(-8) and 1.9 x 10(-7) M with a detection limit of 9.2 x 10(-9) M. Diluted tablet solutions and urine samples were analysed directly, while plasma samples needed an extraction procedure before voltammetric analysis. An improved HPLC procedure was used as comparative method.

Absorption↗