Biomedical subjects

S R Partridge

Publications and source records attributed to S R Partridge.

11 recordsLinked to original sources

PubMed2001

Family of class 1 integrons related to In4 from Tn1696.

The class 1 integron In28, found in the multidrug resistance transposon Tn1403, was found to be located in the res site of the backbone transposon and is flanked by a 5-bp direct duplication, indicating that it reached this position by transposition. In28 has a backbone structure related to that of In4, but has lost internal sequences, including the sul1 gene, due to an IS6100-mediated deletion. In28 also lacks the partial copy of IS6100 found in In4 and contains different gene cassettes, blaP1, cmlA1, and aadA1. In1, the class 1 integron found in the multidrug resistance plasmid R46, is also located in a putative res site and belongs to the In4 group. In1 has a shorter internal deletion than In28 and has also lost one end. Additional integrons with structures related to In4 were also found in databases, and most of them had also lost either one end or internal regions or both. Tn610 belongs to this group.

Base Sequence↗

PubMed2001

Transposons Tn1696 and Tn21 and their integrons In4 and In2 have independent origins.

The first 13.6 kb of the mercury and multidrug resistance transposon Tn1696, which includes the class 1 integron In4, has been sequenced. In4 is 8.33 kb long and contains the 5'-conserved segment (5'-CS) and 2.24 kb of the 3'-conserved segment (3'-CS) flanking four integrated cassettes. The 3'-CS region is followed by one full copy and an adjacent partial copy of the insertion sequence IS6100 flanked, in inverse orientation, by two short segments (123 and 152 bp) from the outer right-hand end of class 1 integrons. This structure is representative of a distinct group of class 1 integrons that differs from In2, found in Tn21, and other related class 1 integrons. In4 does not include transposition genes but is bounded by characteristic 25-bp inverted repeats and flanked by a direct duplication of 5 bp of the target sequence, indicating that it was inserted by a transpositional mechanism. In4 lies between the resII and resI sites of a backbone mercury resistance transposon which is >99.5% identical to Tn5036. Although Tn21 and Tn1696 are both classified as members of the Tn21 subfamily of the Tn3 transposon family, the backbone mercury resistance transposons are only 79 to 96% identical. Tn21 also contains a region of about 0.7 kb not found in Tn1696. The integrons In2 and In4 carrying the antibiotic resistance genes have been inserted at different locations into distinct ancestral mercury resistance transposons. Thus, Tn21 and Tn1696 have independent histories and origins. Other transposons (Tn1403 and Tn1412) that include a class 1 integron also have independent origins. In all except Tn21, the integron is located within the res region of the backbone transposon.

Anti-Infective Agents, Local↗

PubMed1999

Mobile gene cassettes and integrons in evolution.

Integrons and the site-specific recombination systems encoded by them provide a simple mechanism for the addition of new genes to bacterial chromosomes. Although there is substantial divergence among the four known integron-encoded integrases, they all recognize the recombination sites, known as 59-base elements, that are associated with genes that are packaged in gene cassettes. In contrast, the integron-associated recombination sites, attl sites, are preferentially recognized by the cognate integrase.

Base Sequence↗

PubMed1997

DivIB, FtsZ and cell division in Bacillus subtilis.

The Bacillus subtilis cell-division protein DivIB is shown to be present at an approximately 100-fold higher abundance (approximately 5000 molecules per cell) than its Escherichia coli FtsQ homologue. B. subtilis contains much more DivIB (at least 60-fold) than is needed to maintain the normal rate of cell division at moderate temperatures (up to 37 degrees C). However, a high level of DivIB is needed to achieve the normal rate of division at high temperature (47 degrees C). It is proposed that membrane-bound DivIB is involved in stabilizing or promoting the assembly of the division complex (which is intrinsically temperature sensitive) in a manner that requires more of the protein at higher temperatures. The (at least) 60-fold accumulation of DivIB and FtsZ from an undetectable level, following germination and outgrowth of spores up until the stage of the first cell division, was unaffected by blocking of initiation of the first round of replication. It is concluded that there is no major synthesis of either of these 'division initiation' proteins linked to initiation, progression or completion of the first round of replication accompanying spore outgrowth.

Bacillus subtilis↗

PubMed1996

Clusterin, a putative complement regulator, binds to the cell surface of Staphylococcus aureus clinical isolates.

The ability of Staphylococcus aureus Cowan I strain and a number of S. aureus clinical isolates to bind to the human blood glycoprotein clusterin was investigated. Binding of clusterin to these strains was tested by both enzyme-linked immunosorbent assay and flow cytometry. All of the S. aureus strains examined appeared to bind clusterin to some extent, while nonpathogenic control strains Bacillus subtilis BR151 and Escherichia coli JM109 did not. Three S. aureus isolates were selected for more detailed study; binding of labeled clusterin was saturable, inhibited in the presence of excess unlabeled clusterin, and prevented by pretreatment of bacteria with proteases. From the saturation binding studies, estimates of the affinity constants for the binding of clusterin to the bacteria ranged from 31 to 57 nM. Addition of clusterin to S. aureus cultures was also found to result in aggregation of the bacterial cells; aggregation was not detected when clusterin was added to B. subtilis BR151 or E. coli JM109 cultures. These results suggest that at least some S. aureus strains possess specific proteinaceous receptors for clusterin. Such receptors may be an important new bacterial virulence determinant for S. aureus, as clusterin has been proposed to have a role in the regulation of complement activity.

Clusterin↗

PubMed1995

FtsZ and nucleoid segregation during outgrowth of Bacillus subtilis spores.

Spores of a strain of Bacillus subtilis in which ftsZ was under the control of the spac promoter were allowed to germinate and grow out in the presence of increasing concentrations of isopropyl-beta-D-thiogalactopyranoside (IPTG). Over the IPTG concentration range of 0 to 10(-3) M, the level of FtsZ from the time when the first nucleoid segregations were occurring, measured in Western blot (immunoblot) transfer experiments, varied between 15 and 100% of that in the wild type. Septation was completely blocked (for at least several hours) when the amount of FtsZ was < 30% of the wild-type level. At all levels of ftsZ induction, the timing and rate of segregation of nucleoids following the first round of replication were unaltered. It is concluded that FtsZ has no direct role in nucleoid segregation in this situation.

Bacillus subtilis↗

PubMed1994

Conservation of the 168 divIB gene in Bacillus subtilis W23 and B. licheniformis, and evidence for homology to ftsQ of Escherichia coli.

The chromosomal regions of Bacillus subtilis (Bs) W23 and Bacillus licheniformis (Bl), which span the sequence encoding the homolog of the division initiation gene, divIB, of Bs168 were cloned and sequenced. The high level of conservation of the amino acid (aa) sequence of the DivIB protein (99 and 68% identity for BsW23 and Bl, respectively) was consistent with a significant role for this protein in the cell cycle of the two species. The hydropathy profile for DivIB of Bl was almost identical to that of Bs168 and consistent with a membrane location, as previously established for the latter. The higher than average level of identity (87%) of the 31-aa N-terminal cytoplasmic domain of DivIB between Bs168 and Bl raised the possibility of a special role for this domain. Database analyses using the Bl DivIB sequence and similarity analyses also strongly suggested that DivIB, of Bl and Bs, is a homolog of FtsQ of Escherichia coli. The flanking sequences extending into the unidentified orfs both upstream and downstream from divIB were highly conserved between Bs168 and Bl at both the nucleotide and aa levels. It was confirmed that orf4 of Bs168 is dispensable.

Amino Acid Sequence↗

PubMed1994

Sigma factors, asymmetry, and the determination of cell fate in Bacillus subtilis.

Soon after the initiation of sporulation, Bacillus subtilis divides asymmetrically to produce sister cells that have very different developmental fates. Recently, it has been proposed that the differential gene expression which begins soon after this division is due to cell-specific activation of the transcription factors sigma F and sigma E in the prespore and the mother cell, respectively. We describe the use of a method for the localization of gene expression in individual sporulating cells that lends strong support to the cell-specific localization of sigma F and sigma E activities. The dependence of sigma E activity on integrity of the gene encoding sigma F has led to the suggestion that activation of sigma F in the prespore leads to a directional signal that triggers activation of sigma E only in the mother cell. Here we show that sigma E actually specifies the fate of the mother cell; in the absence of sigma E, two prespore-like cells are made. The appearance of sigma F activity at both poles of a sigma E-deficient mutant supports the idea that sigma F normally remains latent in the mother cell and that its activation depends on some morphological or physiological feature of the prespore. We present a model for the generation of asymmetry and the establishment of cell fate in B. subtilis.

Bacillus subtilis↗

PubMed1993

The importance of morphological events and intercellular interactions in the regulation of prespore-specific gene expression during sporulation in Bacillus subtilis.

We have established a time course for the early morphological events of sporulation in Bacillus subtilis and related this to changes in gene expression, particularly those occurring in the prespore compartment. We have also systematically studied the effects of mutations in various regulatory (spo) genes on prespore-specific gene expression. On the basis of these results, and those of other laboratories, at least four distinct temporal classes of prespore-specific gene expression can now be distinguished. The first class begins within 15 min of the formation of the spore septum, and requires the sigma F form of RNA polymerase. The second class, also directed by RNA polymerase containing sigma F, begins soon after the completion of prespore engulfment, and depends on an intercellular signal from the mother cell. This transcription results in synthesis of sigma G. However, sigma G activity, directing the third class of gene expression, appears only about 30 min later and is dependent on the completion of prespore engulfment and on further interactions with the mother cell. The fourth class of gene expression has been described. The results demonstrate that the prespore programme of gene expression incorporates a series of control points modulated by information from the mother cell and on progress through the morphogenetic process.

Bacillus subtilis↗

PubMed1992

Structure and function of the spoIIIJ gene of Bacillus subtilis: a vegetatively expressed gene that is essential for sigma G activity at an intermediate stage of sporulation.

The spo-87 mutation is one of two sporulation mutations originally used to define the spo0J locus of Bacillus subtilis. We now show that it blocks sporulation after completion of prespore engulfment (stage III). Surprisingly, the operon is expressed vegetatively, probably from a sigma A-dependent promoter, and its expression is shut down at the transcriptional level at about the onset of sporulation. DNA sequencing reveals that the locus defined by spo-87, which we now designate spoIIIJ, consists of a bicistronic operon. However, only the first gene is essential for sporulation; the function of the second cistron is cryptic. The predicted SpoIIIJ product has an M(r) of 29,409. It probably forms a lipoprotein and is rich in basic and hydrophobic amino acids. Mutations in spoIIIJ abolish the transcription of prespore-specific genes transcribed by the sigma G form of RNA polymerase but not transcription of the spoIIIG gene encoding sigma G. The SpoIIIJ product could be involved in a signal transduction pathway coupling gene expression in the prespore to events in the mother cell, or it could be necessary for essential metabolic interactions between the two cells.

Amino Acid Sequence↗

PubMed1991

The role of sigma F in prespore-specific transcription in Bacillus subtilis.

Sporulation in Bacillus subtilis is a simple developmental system in which a single cell undergoes differentiation to two 'sister' cells, namely the prespore and the sporangium. Prespore-specific gene expression is largely dependent on the synthesis of a transcription factor, sigma G. Transcription of spolllG, the gene encoding sigma G, is under precise temporal and spatial control, requiring the products of at least eight genes that are expressed in the pre-divisional cell. Here we show that the product of one of these genes, another sigma factor, sigma F, is by itself sufficient to direct transcription of spolllG in non-sporulating cells. The results indicate that the cell-specificity of prespore gene expression is determined by a mechanism that exerts temporal and spatial control over the activity of sigma F.

Bacillus subtilis↗