Biomedical subjects

S R Yates

Publications and source records attributed to S R Yates.

22 records · Page 2Linked to original sources

PubMedDate not supplied

A dynamic two-dimensional system for measuring volatile organic compound volatilization and movement in soils.

There is an important need to develop instrumentation that allows better understanding of atmospheric emission of toxic volatile compounds associated with soil management. For this purpose, chemical movement and distribution in the soil profile should be simultaneously monitored with its volatilization. A two-dimensional rectangular soil column was constructed and a dynamic sequential volatilization flux chamber was attached to the top of the column. The flux chamber was connected through a manifold valve to a gas chromatograph (GC) for real-time concentration measurement. Gas distribution in the soil profile was sampled with gas-tight syringes at selected times and analyzed with a GC. A pressure transducer was connected to a scanivalve to automatically measure the pressure distribution in the gas phase of the soil profile. The system application was demonstrated by packing the column with a sandy loam in a symmetrical bed-furrow system. A 5-h furrow irrigation was started 24 h after the injection of a soil fumigant, propargyl bromide (3-bromo-1-propyne; 3BP). The experience showed the importance of measuring lateral volatilization variability, pressure distribution in the gas phase, chemical distribution between the different phases (liquid, gas, and sorbed), and the effect of irrigation on the volatilization. Gas movement, volatilization, water infiltration, and distribution of degradation product (Br-) were symmetric around the bed within 10%. The system saves labor cost and time. This versatile system can be modified and used to compare management practices, estimate concentration-time indexes for pest control, study chemical movement, degradation, and emissions, and test mathematical models.

Agriculture↗

PubMedDate not supplied

An apparatus for measuring the gas permeability of films.

The gas permeability of plastic films is important in packaging, containment, and agricultural fumigation. Recently, an approach for estimating the mass transfer coefficient of vapors across a film was presented by Papiernik et al. (2001). The mass transfer coefficient is an intrinsic property of a film-chemical combination, independent of the concentration gradient maintained across the film. Here we describe an apparatus useful for obtaining permeability data; the model of Papiernik et al. (2001) may be fitted to the data to determine mass transfer coefficients. The assembled equipment provides a sealed permeability cell, where a sample of the film to be tested is sandwiched between two static half-cells. Vapor is spiked to one side of the film and the concentrations in the spiked and receiving chamber are monitored until equilibrium. A sealed system is required for this approach; the permeability cells described here were gas-tight for >40 d. This approach produces reproducible measures of mass transfer coefficients that are not dependent on the size of the experimental apparatus. Model parameters were similar when fitted simultaneously as when determined independently from the same data set.

Agriculture↗

PubMedDate not supplied

Partitioning and persistence of trichlorfon and chlorpyrifos in a creeping bentgrass putting green.

Golf course putting greens typically receive high pesticide applications to meet high quality demands. Research on pesticide fate in turf ecosystems is important to better understand the potential impact of pesticide use on the environment and human health. This research was conducted to evaluate the environmental fate of two commonly used insecticides--trichlorfon (dimethyl 2,2,2-trichloro-1-hydroxyethylphosphonate) and chlorpyrifos (O,O-diethyl O-3,5,6-trichloro-2-pyridylphosphorothioate)--in a creeping bentgrass (Agrostis palustris Huds.) putting green under customary field management practices at the University of California-Riverside Turf Research Facility during 1996 and 1997. The two insecticides were chosen because of their difference in water solubility, persistence, adsorption, and vapor pressure. Volatilization, clipping removal, and soil residues of the insecticides were quantified and leaching was monitored using lysimeters installed in putting green plots. Results showed trichlorfon volatilization, clipping removal, and leaching loss was insignificant (in the range of 0.0001-0.06% of applied mass) both in 1996 and 1997. No significant difference in clipping removal of trichlorfon and chlorpyrifos was observed in both years (0.06 and 0.05% of applied mass for trichlorfon and 0.15 and 0.19% of applied mass for chlorpyrifos, respectively, in 1996 and 1997), but significantly lower cumulative leaching and lower soil concentration was observed in 1997 than in 1996. Volatilization loss of chlorpyrifos was not significantly different between 1996 (2.05%) and 1997 (2.71%). Volatilization loss of trichlorfon in 1996 (0.01%) was significantly higher than in 1997 (0.008%). This study demonstrated the fraction of applied insecticides leaving the turf putting greens was minimal.

California↗

PubMedDate not supplied

Gas-phase sorption-desorption of propargyl bromide and 1,3-dichloropropene on plastic materials.

The goal of this research was to provide information for choosing appropriate materials for studying gas-phase concentrations of propargyl bromide (3BP) and 1,3-dichloropropene (1,3-D) in laboratory experiments. Several materials were tested and found to sorb both gas-phase chemicals in the following order: stainless steel (SS) < Teflon polytetrafluoroethylene (PTFE-FEP) approximately flexible polyvinyl chloride (PVC) approximately acrylic < low-density polyethylene (PE) < vinyl approximately silicone < polyurethane foam (PUF). Sorption of SS was insignificant and PUF sorbed all the fumigant that was applied. For the other materials, linear sorption coefficients (Kd) for 3BP ranged from 3.0 cm3 g(-1) for PVC to 215 cm3 g(-1) for silicone. Freundlich sorption coefficients for 1,3-D ranged from 11.5 to 371 cm3 g(-1). First-order desorption rate constants in an open system ranged from 0.05 to 1.38 h(-1) for 3BP and from 0.07 to 1.73 h(-1) for 1,3-D. In a closed system, less than 2% of sorbed fumigant desorbed from vinyl while up to 99% desorbed from PVC within 24 h when equilibrated at the highest headspace concentration. Sorption of both fumigants was linearly related to the square root of time except for vinyl and silicone. This may indicate non-fickian diffusion of fumigant into the polymer matrix. Vinyl, silicone, PE, and PUF should be avoided for quantitative study of organic gases, except possibly as a trapping medium. Use of PTFE, PVC, and acrylic may require correction for sorption-desorption and diffusion.

Adsorption↗