PubMed Health⌕ Search

Biomedical subjects

S W Hui

Publications and source records attributed to S W Hui.

At least 19 recordsLinked to original sources

Induction of cytotoxic T-lymphocytes by electroporation-enhanced needle-free skin immunization.

A needle-free method based on transcutaneous electroporation is described for delivering peptide vaccines. The K(b)-binding OVA-peptide SIINFEKL was used as an example to induce the peptide-specific cytotoxic T-lymphocytes (CTL) response in mice. A saturated anionic lipid was added during electroporation, and post-pulse electro-osmosis was applied to enhance the vaccine delivery. Electroporation was found to stimulate the exodus of Langerhans cells (LC) from the skin. The peptide transported into and through murine skin was measured using a Franz diffusion apparatus. Most peptide was retained in the skin rather than passing through the skin in the process. The peptide was delivered to the dorsal skin of mice by in vivo electroporation. An electroporation-transportable oligonucleotide with CpG motif was used as adjuvant. The efficacy of peptide delivery was comparable to that of intradermally injected with Freund's complete adjuvant (FCA). Peptide-specific CTL response to the vaccine delivered by needle-free electroporation/electro-osmosis was equivalent to that delivered by intradermal injection, as determined by production of the peptide-specific IFN-gamma in ELISPOT assay.

Adjuvants, Immunologic↗

Local and transient structural changes in stratum corneum at high electric fields: contribution of Joule heating.

Electroporation of skin is accompanied by local heating, such that thermally induced structural changes of the stratum corneum (SC) accompany the field effect. Comparing on the time scale, the local changes in structure, temperature and conductance of the SC, during and after the pulse, it is seen that Joule heating also facilitates the subsequent molecular transport. It is found that the transport of medium-sized, ionic molecules occurs through localized transport regions (LTR). The size of a LTR increases with the pulse length, whereas the density of the LTRs increases with increasing voltage, for instance at U(SC=)80 V, the LTR cover approximately 0.02--1% of the surface area. The state of low resistance within the LTR is long-lived. During high voltage application, the center of the LTR is heated above the phase transition temperature of the SC lipids (70 degrees C) and the heat front propagates outwards. Inside the SC, the pulse causes aggregates of small-sized vesicles. At a higher temperature, the aggregate formation and their disappearance are delayed. Multiple pulses with the applied voltage of U(appl)=80 V induce the formation of long-lasting vesicle aggregates with a diameter of slashed circle=1--30 microm, covering 0.05--0.5% of the total sample area. The electric energy dissipated within the LTR during high voltage application is apparently sufficient to raise the temperature well above the phase transition temperature of the lipids of the SC, accounting for the conformational changes from the multi-lamella to the vesicular structures.

Animals↗

Pilot study of topical delivery of methotrexate by electroporation.

BACKGROUND: The topical administration of methotrexate (MTX) for the treatment of psoriasis and neoplastic diseases is restricted by the poor diffusion of MTX across the stratum corneum. OBJECTIVES: We applied electroporation to increase the transdermal transport of MTX. METHODS: Electrodes were placed either side-by-side on the surface of excised full thickness pig skin, or on a piece of skin clamped between compartments of a vertical diffusion chamber. Sixty rectangular electric pulses at 120 V, 1 ms and 1 Hz were applied across the skin. MTX was left on the skin surface for an additional 10 min to take advantage of diffusion through electropores. Cumulative drug transport was measured by radioactive tracing, using [3H]-methotrexate, from punch biopsy samples taken from under the cathode. The integrity of the radioisotope was verified by high-performance liquid chromatography. RESULTS: Using side-by-side electrodes, treatment with the pulses alone resulted in a 2.5-fold increase; adding anionic lipid enhancers to the pulses resulted in a 4.4-fold enhancement compared with passive diffusion. Concurrent iontophoresis for the 11-min time period made a nonsignificant contribution. To reduce tissue resistance we used 40 degrees C hyperthermia in a vertical diffusion chamber; transport was increased 11-fold to 53 microg cm(-2) (flux = 290 microg cm(-2) h(-1)). MTX penetration profiles indicated that more than half of the MTX was confined to the epidermis and papillary dermis. The tissue concentration in this superficial reactive unit was 1.7 mmol L(-1). CONCLUSIONS: Electroporation of MTX with an anion lipid enhancer under a mild hyperthermic environment provided a significant transdermal delivery within a short application time. The method may be an effective means of drug delivery for treating psoriasis or other MTX-sensitive disorders and avoids the potential systemic toxicity.

Administration, Cutaneous↗

Temperature-controlled content release from liposomes encapsulating Pluronic F127.

Temperature-dependent internal content release from liposomes was examined using di-oleoylphosphatidylcholine (DOPC)/cholesterol liposomes with encapsulated Pluronic F127 molecules. The interaction of Pluronic F127 with the lipid bilayer at elevated temperature causes the release of encapsulated contents. Content release was measured using fluorescent markers of two different sizes: small, carboxyfluorescein (CF), and large, bovine serum albumin-conjugated fluorescein iso-thiocyanate (BSA-FITC). Release of CF was studied using fluorescence de-quenching, while that of BSA-FITC was studied using fluorescence emission quenching due to fluorescence resonance energy transfer (FRET). Temperature-controlled complete internal content release was achieved at a precise temperature by controlling the concentration of the encapsulated Pluronic. Increasing cholesterol % in the liposome composition resulted in a sharper transition with temperature in content release. The onset temperature of content release increased with decrease in Pluronic concentration. For the same Pluronic concentration, the onset temperature also depended on the size of the encapsulated marker and was higher for larger markers. We have established that onset of content release is determined by the critical micellar temperature (CMT) of the Pluronic. Temperature-sensitive liposomes, made stealth using di-stearoyl(polyethylene glycol 5000) phosphatidylethanolamine (DSPEG5000PE) in conjunction with Pluronic F127, had similar temperature sensitivity and efficiency in content release compared to the non-stealth liposomes.

Cholesterol↗

High-efficiency electrotransfection of human primary hematopoietic stem cells.

A major obstacle to gene transfer into hematopoietic stem cells, a key step for many gene therapy and tissue replacement applications, is its low efficiency. High cell mortality is responsible for the low efficiency of electrotransfection when this technique is applied to certain 'refractory' cell types such as hematopoietic stem cells. Using human primary CD-34+ cells from peripheral blood as a model, we found that transfection-induced apoptosis and, to a lesser extent, postpulse colloidal-osmotic swelling are two main factors for the poor transfection of these cells. By applying caspase inhibitors (B-D-Fluomethyl Ketone and Z-VAD-FMK) to reduce apoptosis, and by using the postpulse pelleting method to suppress colloidal-osmotic swelling, we achieved a transfection efficiency of ~20%, regardless of the presence of cytokines in the suspension medium. This effort brings the ex vivo electrotransfection efficiency within the reach of therapeutic applications.

Amino Acid Chloromethyl Ketones↗

Electroporation-enhanced gene delivery in mammary tumors.

Electroporation was applied to enhance gene transfer into subcutaneous MC2 murine breast tumors. Cultured MC2 cells were also transfected by electroporation or by cationic liposomes in the presence of serum using pSV-luc plasmids. Electroporation parameters and liposome formulation were optimized to achieve the highest relative levels of transfection. An electric field threshold for successful electrotransfection in cultured cells appeared around 800-900 V/cm. The liposomes used contained the cationic lipid dioleoyl-3-trimethylammonium propane (DOTAP). Multilamellar vesicles (MLV) had a 10-fold advantage over small unilamellar vesicles (SUV) in cell culture transfection. For in vivo gene delivery, the plasmids were injected either alone, or in complex with MLV or SUV DOTAP liposomes. A series of six electric pulses 1 ms long were applied across tumors, using caliper electrodes on the skin surface. Electric field strengths ranged from 400-2300 V/cm. Luciferase expression was approximately two orders of magnitude higher than controls in tumors treated with pulses > or =800 V/cm. Differences between enhanced relative levels of transfection using uncomplexed plasmid and lipoplexes were not statistically significant. Distribution of DNA into tumor tissues was monitored by fluorescence in situ PCR. The highest numbers of fluorescent cells were found in tumors electroporated following the injection of plasmid. The significant transfection improvement shows that in vivo electroporation is a powerful tool for local gene delivery to tumors.

Animals↗

Apoptosis induced by DNA uptake limits transfection efficiency.

Electrotransfection is an effective method for transfecting lymphoid cells. However, the transfection efficiency of certain lymphoid cells is low. L1210 subclones and NFS-70 pro-B cells, which are highly refractory to various transfection methods, were used to identify the limiting factors. Cells were electrotransfected with plasmids coding for green fluorescence protein or luciferase. The luciferase expression of L1210 subclone 3-3 was found to increase 6-12 h after electroporation, but decreased significantly from 12 to 48 h. The lower level of luciferase activity at later time periods correlated with decreases in cell viability, which was shown to be due to apoptosis, as determined by propidium iodide/acrindine orange staining, DNA laddering, and prevention of cell death by addition of caspase inhibitors. Similar results were observed with NFS-70 pro-B cells and select L1210 subclones. In contrast, L1210 parental and L1210 subclone 7-15.6 cells undergo only low levels of apoptosis (< or = 5%). Apoptosis occurred only when DNA (plasmids or salmon sperm DNA) was present during electroporation, but was not dependent on the conformation of the DNA used or the expression of transgenes. Cells pulsed in the presence of dextran sulfate (MW 500,000) did not apoptose. Similar results were observed when L1210 subclone 3-3 was transfected using the cationic lipid 1, 2-dioleoyl-3-trimethylammonium propane, although the transfection efficiency and corresponding rate of apoptosis were significantly lower. Applying the caspase inhibitor fluoromethyl ketone (Boc-ASP-FMK) dramatically improved cell viability and transgene expression of select L1210 subclones and NFS-70 pro-B cells.

Amino Acid Chloromethyl Ketones↗

Polyethylene glycol enhances lipoplex-cell association and lipofection.

The association between liposome-DNA complexes (lipoplexes) and targeted cell membranes is a limiting step of cationic liposome-mediated transfection. A novel technique was developed where lipoplex-cell membrane association is enhanced by the addition of 2-6% polyethylene glycol (PEG) to the transfection media. Lipoplex-cell association was found to increase up to 100 times in the presence of PEG. Transfection increased correspondingly in the presence of PEG. This increase was found in several cell lines. These results show that lipoplex adsorption to cell membranes is a critical step in liposome-mediated transfection. This step can be facilitated by PEG-induced particle aggregation.

Animals↗

Merocyanine 540 as a fluorescence indicator for molecular packing stress at the onset of lamellar-hexagonal transition of phosphatidylethanolamine bilayers.

The fluorescence of Merocyanine 540 (MC 540) is sensitive to the molecular packing of membrane lipids. Therefore, the fluorescence of MC 540 is expected to be sensitive to the curvature-related packing stress at the onset of the lamellar-hexagonal phase transition. We measured the fluorescence intensity of MC 540 when the temperatures of lipid bilayers approached their lamellar-hexagonal phase transitions. The fluorescence of MC 540 in the presence of egg and dioleoylphosphatidylethanolamine bilayers increased at the respective lamellar-hexagonal phase transitions of these lipids. Furthermore, increases in fluorescence intensity were also observed at temperatures just below their phase transitions. The enhanced fluorescence was not due to the specific interaction of the dye with the ethanolamine headgroup, because no such increase was observed when the probe was exposed to phosphatidylethanolamines which do not form hexagonal phase within the range of applied temperature. In addition, when the temperature of the lamellar-hexagonal phase transition was shifted, by the addition of a small amount of phosphatidylcholine, the dependence of the fluorescence intensity on temperature was modified accordingly. We postulate that the change of MC 540 fluorescence intensity at temperatures approaching the lamellar-hexagonal phase transition reflects changes in the partition of MC 540 into the fluid lipid phase. The change in partition is influenced by the curvature stress in bilayers at temperatures just below the lamellar-hexagonal phase transition.

Fluorescent Dyes↗

Physicochemical characterization and purification of cationic lipoplexes.

Cationic lipid-nucleic acid complexes (lipoplexes) consisting of dioleoyltrimethylammoniumpropane (DOTAP) liposomes and plasmid DNA were prepared at various charge ratios (cationic group to nucleotide phosphate), and the excess component was separated from the lipoplex. We measured the stoichiometry of the lipoplex, noted its colloidal properties, and observed its morphology and structure by electron microscopy. The colloidal properties of the lipoplexes were principally determined by the cationic lipid/DNA charge ratio and were independent of the lipid composition. In lipoplexes, the lipid membranes as observed in freeze-fracture electron microscopy were deformed into high-radius-of-curvature features whose characteristics depended on the lipid composition. Lipoplexes prepared at a threefold or greater excess of either DOTAP or DNA could be resolved into complexes with a defined stoichiometry and the excess component by sedimentation to equilibrium on sucrose gradients. The separated, positively charged complex retained high transfection activity and had reduced toxicity. The negatively charged lipoplex showed increased transfection activity compared to the starting mixture. In cryoelectron micrographs the positively charged complex was spherical and contained a condensed but indistinct interior structure. In contrast, the separated negatively charged lipoplexes had a prominent internal 5.9 +/- 0.1-nm periodic feature with material projecting as spikes from the spherical structure into the solution. It is likely that these two lipoplexes represent structures with different lipid and DNA packing.

Animals↗

Time-dependent ultrastructural changes to porcine stratum corneum following an electric pulse.

The morphological changes to heat-stripped porcine stratum corneum following an electroporating pulse were studied by time-resolved freeze fracture electron microscopy. Pulses at a supra-electroporation threshold of 80 volts and 300 microseconds were applied across the stratum corneum with a pair of copper plate electrodes, which also served as cooling contacts. Multilamellar vesicles of 0.1-5.5 mm in diameter in the intercellular lipid bilayers of the stratum corneum appeared in less than milliseconds after pulsing. Pulsed samples exhibited aggregations of vesicles, whereas only occasional single vesicles were seen in the unpulsed samples. Aggregates form in less than a millisecond and disappear within minutes after the pulse. Their size ranged from 0.3 to 700 mm2. The size of individual vesicles, aggregate density, and size were analyzed as functions of postpulse time. These aggregate formations seem to be a secondary reaction to the pulse-induced skin permeabilization, determined by the resistance drop and recovery after the pulse. Heating the samples to 65 degrees C also caused vesicle aggregates of similar appearance to form, suggesting that these aggregations are related to the heating effect of the pulse. Hydration is thought to play an important role in aggregate formation.

Administration, Cutaneous↗

Improving electrotransfection efficiency by post-pulse centrifugation.

We have demonstrated that the viability of electrotransfected adherent CHO and suspended NK-L, K-562, L1210 and MC2 cells is improved if pelleting by centrifugation is performed immediately after pulsing. The protection effect on cell viability is cell line- and pellet thickness-dependent. For forming CHO cell pellets, centrifugation force (300-13,000 g) and duration are not crucial; about five to 10 cell layers in the pellet provide the optimal protection effect. NK-L, K-562, L1210 and MC2 cell pellets are optimally formed by centrifugation at 13,000 g in an Eppendorf desktop centrifuge. Pelleting improves the cell viability over the whole range of the NK-L, K-562, L1210 and MC2 cell concentrations studied. When this pelleting method is applied to load CHO cells with FITC-dextran (41,000 MW), not only is the success rate close to 100%, but the growth rate is similar to the control, which is far better than the conventional electroporation method. Furthermore, the transfection efficiency of the five cell lines in pellet is significantly higher than that in suspension.

Animals↗

Lipoplex size is a major determinant of in vitro lipofection efficiency.

The inhibition effect of serum on the transfection efficiency of cationic liposome-DNA complexes (lipoplexes) is a major obstacle to the application of this gene delivery vector both in vitro and in vivo. The size of the lipoplexes, as they are presented to targeted cells, is found to be the major determinant of their effectiveness in transfection. The transfection efficiency and the cell association and uptake of lipoplexes with CHO cells was found to increase with increasing lipoplex size. The influence on the transfection efficiency of lipoplexes by their cationic lipid:DNA ratios, types of liposomes, incubation time in polyanion containing media, and time of serum addition, are mediated mainly through size. Lipoplexes at a 2:1 charge ratio grow in size in media containing polyanions. The size growth may be arrested by adding serum to the incubation media. By using large lipoplexes, especially those made from multilamellar vesicles, the serum inhibition effect may be overcome.

Animals↗

Increased DNA synthesis in INIT/10T1/2 cells after exposure to a 60 Hz magnetic field: a magnetic-field or a thermal effect?

This study was designed to test the hypothesis that a 0.1-0.8-mT 60 Hz magnetic field may act as a promoter of carcinogenesis. C3H 10T1/2 mouse fibroblasts initiated with the carcinogen methylcholanthrene (INIT/10T1/2 cells) were used; in these cells, expression of the carcinogenic phenotype is suppressed indefinitely by the presence of retinyl acetate in the culture medium. After withdrawal of retinyl acetate, expression of the carcinogenic phenotype may be observed as the loss of contact inhibition. Cells grown without retinyl acetate were exposed to 0.1-0.8-mT (rms) 60 Hz magnetic fields or to sham fields. Eight days after exposure, magnetic-field and sham-exposed cells showed the same levels of incorporation of [3H]thymidine, and both had counts significantly higher than those of unexposed cells. The rate of incorporation of [3H]thymidine was very sensitive to small (0.1-0.8 degrees C) and transient (60 min) increases in incubation temperature during the first few days of withdrawal of retinyl acetate. Exposure of Jurkat (human acute T-cell lymphoma) and GH3 (rat pituitary tumor) cells to magnetic fields and sham conditions yielded similar results. INIT/10T1/2 cells cultured in the presence of retinyl acetate showed no effect of exposure conditions. Both magnetic-field and sham exposures caused a slight increase in temperature within the exposure zone in the incubator. Thus the differences between rates of incorporation of [3H]thymidine in magnetic field-exposed, sham-exposed and unexposed cells seem to be attributable at least in part to a slight elevation in temperature during exposure. Since some cells appear to be extremely sensitive to small increases in temperature, measurements of magnetic-field effects must be made and interpreted with caution.

Animals↗

Absence of 60-Hz, 0.1-mT magnetic field-induced changes in oncogene transcription rates or levels in CEM-CM3 cells.

Our objective was to assess the reproducibility of the 60-Hz magnetic field-induced, time-dependent transcription changes of c-fos, c-jun and c-myc oncogenes in CEM-CM3 cells reported by Phillips et al. (Biochim. Biophys. Acta, 1132 (1992) 140-144). Cells were exposed to a 60-Hz magnetic field (MF) at 0.1 mT (rms), generated by a pair of Helmholtz coils energized in a reinforcing (MF) mode, or to a null magnetic field when the coils were energized in a bucking (sham) mode. After MF or sham exposure for 15, 30, 60 or 120 min, nuclei and cytoplasmic RNA were extracted. Transcription rates were measured by a nuclear run-on assay, and values were normalized against either their zero-time exposure values, or against those of the c-G3PDH (housekeeping) gene at the same time points. There was no significant difference, at P=0.05, detected between MF and either sham-exposed or control cells at any time point. Transcript levels of the oncogenes were measured by Northern analysis and normalized as above. No significant difference (P=0.05) in transcript levels between MF and either sham-exposed or control cells was detected.

Electromagnetic Fields↗

Conformation and lipid binding properties of four peptides derived from the membrane-binding domain of CTP:phosphocholine cytidylyltransferase.

We are probing the mechanism of the lipid selective membrane interactions of CTP:phosphocholine cytidylyltransferase (CT). We have proposed that the membrane binding domain of CT (domain M) consists of a continuous amphipathic alpha-helix between residues approximately 240-295 [Dunne, S. J., et al. (1996) Biochemistry 35, 11975-11984]. This study examined the secondary structure and membrane binding properties of synthetic peptides derived from domain M: a 62mer peptide encompassing the entire domain (Pep62), a 33mer corresponding to the N-terminal portion (PepNH1), and two 33mers corresponding to the three C-terminal 11mer repeats, one with the wild-type sequence (Pep33Ser), and one with the three serines in the nonpolar face substituted with alanine (Pep33Ala). Peptide secondary structure was analyzed by circular dichroism, and lipid interactions were analyzed by a direct vesicle binding assay, by effects of lipid vesicles on peptide tryptophan fluorescence, and by monolayer surface pressure changes. All peptides bound to vesicles as alpha-helices with selectivity for anionic lipids. Binding involved intercalation of the peptide tryptophan into the hydrophobic membrane core. PepNH1, the peptide with the highest positive charge density, showed strong selectivity for anionic lipids. PepNH1 and Pep33Ser did not bind to PC vesicles; however, the more hydrophobic peptides, Pep33Ala and Pep62, did bind to PC vesicles, with apparent partition coefficients for PC that were only approximately 1 order of magnitude lower than those for PC/PG (1/1). Our results suggest that the polar serines interrupting the nonpolar face of the amphipathic helix serve to lower the lipid affinity and thereby enhance selectivity for anionic lipids. Although diacylglycerol is an activator of the enzyme, none of the peptides responded differentially to PC/diacylglycerol vesicles versus pure PC vesicles, suggesting that domain M alone is not sufficient for the enzyme's response to diacylglycerol. Increases in surface pressure at an air-water interface indicated that the domain M peptides had strong surface-seeking tendencies. This supports a binding orientation for domain M parallel to the membrane surface. Binding of CT peptides to spread lipid monolayers caused surface pressure reductions, suggesting condensation of lipids in the formation of lipid-peptide complexes. At low monolayer surface pressures, Pep62 interacted equally with anionic and zwitterionic phospholipids. This suggests that one determinant of the selectivity for anionic lipids is the lipid packing density (area per molecule).

Amino Acid Sequence↗

Electrorheological modeling of the permeabilization of the stratum corneum: theory and experiment.

Experimentally observed changes in the conductivity of skin under the influence of a pulsing electric field were theoretically analyzed on the basis of a proposed electrorheological model of the stratum corneum (SC). The dependence of relative changes in conductivity on the amplitude of electric field and timelike parameters of applied pulses or pulse trains have been mathematically described. Statistical characteristics of phenomena of transient and long-term electroporation of SC were taken into consideration. The time-dependent decreases of skin resistance depicted by the models were fitted to experimental data for transient and long-term skin permeabilization by electric pulses. The results show two characteristic times and two spectra of characteristic energies for transient and long-term permeabilizations. The rheological parameters derived from the fittings agreed with those reported elsewhere for biological membranes.

Animals↗