Biomedical subjects

Sabine Frank

Publications and source records attributed to Sabine Frank.

8 recordsLinked to original sources

PubMed2004

Remorins form a novel family of coiled coil-forming oligomeric and filamentous proteins associated with apical, vascular and embryonic tissues in plants.

Remorins form a superfamily of plant-specific plasma membrane/lipid-raft-associated proteins of unknown structure and function. Using specific antibodies, we localized tomato remorin 1 to apical tissues, leaf primordia and vascular traces. The deduced remorin protein sequence contains a predicted coiled coil-domain, suggesting its participation in protein-protein interactions. Circular dichroism revealed that recombinant potato remorin contains an alpha-helical region that forms a functional coiled-coil domain. Electron microscopy of purified preparations of four different recombinant remorins, one from potato, two divergent isologs from tomato, and one from Arabidopsis thaliana , demonstrated that the proteins form highly similar filamentous structures. The diameters of the negatively-stained filaments ranged from 4.6-7.4 nm for potato remorin 1, 4.3-6.2 nm for tomato remorin 1, 5.7-7.5 nm for tomato remorin 2, and 5.7-8.0 nm for Arabidopsis Dbp. Highly polymerized remorin 1 was detected in glutaraldehyde-crosslinked tomato plasma membrane preparations and a population of the protein was immunolocalized in tomato root tips to structures associated with discrete regions of the plasma membrane.

Amino Acid Sequence↗

PubMed2004

Modulation of agrin function by alternative splicing and Ca2+ binding.

The aggregation of acetylcholine receptors on postsynaptic membranes is a key step in neuromuscular junction development. This process depends on alternatively spliced forms of the proteoglycan agrin with "B-inserts" of 8, 11, or 19 residues in the protein's globular C-terminal domain, G3. Structures of the neural B8 and B11 forms of agrin-G3 were determined by X-ray crystallography. The structure of G3-B0, which lacks inserts, was determined by NMR. The agrin-G3 domain adopts a beta jellyroll fold. The B insert site is flanked by four loops on one edge of the beta sandwich. The loops form a surface that corresponds to a versatile interaction interface in the family of structurally related LNS proteins. NMR and X-ray data indicate that this interaction interface is flexible in agrin-G3 and that flexibility is reduced by Ca(2+) binding. The plasticity of the interaction interface could enable different splice forms of agrin to select between multiple binding partners.

Agrin↗

PubMed2003

The role of cystine knots in collagen folding and stability, part II. Conformational properties of (Pro-Hyp-Gly)n model trimers with N- and C-terminal collagen type III cystine knots.

In mature collagen type III the homotrimer is C-terminally cross-linked by an interchain cystine knot consisting of three disulfide bridges of unknown connectivity. This cystine knot with two adjacent cysteine residues on each of the three alpha chains has recently been used for the synthesis and expression of model homotrimers. To investigate the origin of correct interchain cysteine pairings, (Pro-Hyp-Gly)(n) peptides of increasing triplet number and containing the biscysteinyl sequence C- and N-terminally were synthesised. The possibilities were that this origin may be thermodynamically coupled to the formation of the collagen triple helix as happens in the oxidative folding of proteins, or it could represent a post-folding event. Only with five triplets, which is known to represent the minimum number for self-association of collagenous peptides into a triple helix, air-oxidation produces the homotrimer in good yields (70 %), the rest being intrachain oxidised monomers. Increasing the number of triplets has no effect on yield suggesting the formation of kinetically trapped intermediates, which are not reshuffled by the glutathione redox buffer. N-terminal incorporation of the cystine knot is significantly less efficient in the homotrimerisation step and also in terms of triple-helix stabilisation. Compared to an artificial C-terminal cystine knot consisting of two interchain disulfide bridges, the collagen type III cystine knot produces collagenous homotrimers of remarkably high thermostability, although the concentration-independent refolding rates are not affected by the type of disulfide bridging. Since the natural cystine knot allows ready access to homotrimeric collagenous peptides of significantly enhanced triple-helix thermostability it may well represent a promising approach for the preparation of collagen-like innovative biomaterials. Conversely, the more laborious regioselectively formed artificial cystine knot still represents the only synthetic strategy for heterotrimeric collagenous peptides.

Amino Acid Sequence↗

PubMed2003

Collagen triple helix formation can be nucleated at either end.

The directional dependence of folding rates for rod-like macromolecules such as parallel alpha-helical coiled-coils, DNA double-helices, and collagen triple helices is largely unexplored. This is mainly due to technical difficulties in measuring rates in different directions. Folding of collagens is nucleated by trimeric non-collagenous domains. These are usually located at the COOH terminus, suggesting that triple helix folding proceeds from the COOH to the NH(2) terminus. Evidence is presented here that effective nucleation is possible at both ends of the collagen-like peptide (Gly-Pro-Pro)(10), using designed proteins in which this peptide is fused either NH(2)- or COOH-terminal to a nucleation domain, either T4-phage foldon or the disulfide knot of type III collagen. The location of the nucleation domain influences triple-helical stability, which might be explained by differences in the linker sequences and the presence or absence of repulsive charges at the carboxyl-terminal end of the triple helix. Triple helical folding rates are found to be independent of the site of nucleation and consistent with cis-trans isomerization being the rate-limiting step.

Amino Acid Sequence↗

PubMed2003

Collagen stabilization at atomic level: crystal structure of designed (GlyProPro)10foldon.

In a designed fusion protein the trimeric domain foldon from bacteriophage T4 fibritin was connected to the C terminus of the collagen model peptide (GlyProPro)(10) by a short Gly-Ser linker to facilitate formation of the three-stranded collagen triple helix. Crystal structure analysis at 2.6 A resolution revealed conformational changes within the interface of both domains compared with the structure of the isolated molecules. A striking feature is an angle of 62.5 degrees between the symmetry axis of the foldon trimer and the axis of the triple helix. The melting temperature of (GlyProPro)(10) in the designed fusion protein (GlyProPro)(10)foldon is higher than that of isolated (GlyProPro)(10,) which suggests an entropic stabilization compensating for the destabilization at the interface.

Animals↗

PubMed2002

Nucleation and propagation of the collagen triple helix in single-chain and trimerized peptides: transition from third to first order kinetics.

The kinetics of triple helix formation from single non-crosslinked peptide chains were studied for the collagen models (ProProGly)10 and (ProHypGly)10 in a broad concentration range and compared with those in nucleated trimers. At very low peptide concentrations the reaction order is 3 but decreases at higher concentrations. For (ProProGly)10 the third order rate constant is 800 M(-2) x s(-1) at 7 degrees C, which corresponds to a very long half time of 15 hours at 60 microM chain concentration. For (ProHypGly)10 the rate constant is about 1000-fold higher, which is consistent with the stabilizing effect of 4-hydroxyproline in collagens. The concentration dependence of the reaction order is explained by a nucleation mechanism in which a very unstable dimer is in fast equilibrium with the monomeric chains and addition of the third chain occurs in a rate-limiting step. At high concentrations nucleation is faster than propagation of helix formation and propagation becomes rate-limiting. To test this hypothesis an artificial nucleus was introduced by fusion of (ProProGly)10 with the trimeric foldon domain of T4 phage or the crosslinking domain of collagen III GlyProProGlyProCysCysGlyGlyGly. These domains were recombinantly attached to the C terminus of (GlyProPro)10 and link the three chains in a similar way to the C-terminal propeptide domain in collagen III. This results in a local intrinsic chain concentration of about 1 M. A first order reaction is observed for the folding of the triple helix in (GlyProPro)10foldon with a half time of 8.3 minutes, which approximately matches the rate of folding from single chains at 1 M peptide concentration. A high activation energy of 54 kJ/mol is found for this reaction, whereas the temperature dependence of the nucleation step is close to zero, confirming earlier findings on natural collagens that cis-trans isomerization of peptide bonds is the rate-limiting step in propagation.

Amino Acid Sequence↗

PubMed2002

Characterization of the matrilin coiled-coil domains reveals seven novel isoforms.

Matrilins constitute a family of four oligomeric extracellular proteins that are involved in the development and homeostasis of cartilage and bone. To reveal their homo- and heterotypic oligomerization propensities, we analyzed the four human matrilin coiled-coil domains by biochemical and biophysical methods. These studies not only confirmed the homo- and heterotypic oligomerization states reported for the full-length proteins but revealed seven novel matrilin isoforms. Specific heterotrimeric interactions of variable chain stoichiometries were observed between matrilin-1 and matrilin-2, matrilin-1 and matrilin-4, and matrilin-2 and matrilin-4. In addition, matrilin-1 formed two different specific heterotetramers with matrilin-3. Interestingly, a distinct heterotrimer consisting of three different chains was formed between matrilin-1, matrilin-2, and matrilin-4. No interactions, however, were observed between matrilin-2 and matrilin-3 or between matrilin-3 and matrilin-4. Both homo- and heterotypic oligomers folded into parallel disulfide-linked structures, although coiled-coil formation was not dependent on disulfide bridge formation. Our results indicate that the heterotypic preferences seen for the matrilin coiled-coil domains are the result of the packing of the hydrophobic core rather than ionic interactions. Mass spectrometry revealed that the concentrations of the individual chains statistically determined the stoichiometry of the heteromers, suggesting that formation of the different matrillin chain combinations is controlled by expression levels.

Amino Acid Sequence↗

PubMed2001

The angiopoietin-like factor cornea-derived transcript 6 is a putative morphogen for human cornea.

The human cornea-specific protein cornea-derived transcript 6 (CDT6) is a member of the angiopoietin gene family. We report the structural and functional characterization of CDT6. We demonstrate that CDT6 is a secreted protein that folds into disulfide-linked homotetramers by coiled-coil interactions. The finding that CDT6 is expressed at high levels in the avascular corneal stromal layer suggested that the protein, similar to certain angiopoietins, acts as a negative regulator of angiogenesis. To test this hypothesis and to assay the effect of the protein on a growing tissue with high vascular density, CDT6 was expressed in a mouse xenograft model. Expression of CDT6 led to a reduction in tumor growth and aberrant blood vessel formation by inducing massive fibrosis. Interestingly, expression of CDT6 also resulted in the deposition of extracellular matrix components typical for the mature corneal stromal layer. These observations strongly suggest a role as morphogen for CDT6 in inducing a corneal phenotype in vivo.

Angiopoietin-1↗