Biomedical subjects

Salvatore Cannistraro

Publications and source records attributed to Salvatore Cannistraro.

14 recordsLinked to original sources

PubMed2007

Nanoscopic and redox characterization of engineered horse cytochrome C chemisorbed on a bare gold electrode.

In this paper, we exploit the potential offered by site-directed mutagenesis to achieve direct adsorption of horse cyt c on a bare gold electrode surface. To this issue, the side chain T102 has been replaced by a cysteine. T102 is close to the surface exposed C-terminal residue (E104), therefore the T102C mutation is expected to generate an exposed cysteine side chain able to facilitate protein binding to the electrode via the sulphur atom (analogously to what observed for yeast iso-1-cyt c). Scanning Tunnelling and Tapping Mode Atomic Force Microscopy measurements show that the T102C mutant stably adsorbs on an Au(111) surface and retains the morphological characteristics of the native form. Cyclic voltammetry reveals that the adsorbed variant is electroactive; however, the heterogeneous electron transfer with the electrode surface is slower than that observed for yeast iso-1-cyt c. We ascribe it to differences in the tertiary architecture of the two proteins, characterized by different flexibility and stability. In particular, the region where the N- and C-terminal helices get in contact (and where the mutation occurs) is analyzed in detail, since the interactions between these two helices are considered crucial for the stability of the overall protein fold.

Animals↗

PubMed2006

Observation of terahertz vibrations in Pyrococcus furiosus rubredoxin via impulsive coherent vibrational spectroscopy and nuclear resonance vibrational spectroscopy--interpretation by molecular mechanics.

We have used impulsive coherent vibrational spectroscopy (ICVS) to study the Fe(S-Cys)(4) site in oxidized rubredoxin (Rd) from Pyrococcus furiosus (Pf). In this experiment, a 15 fs visible laser pulse is used to coherently pump the sample to an excited electronic state, and a second <10 fs pulse is used to probe the change in transmission as a function of the time delay. PfRd was observed to relax to the ground state by a single exponential decay with time constants of approximately 255-275 fs. Superimposed on this relaxation are oscillations caused by coherent excitation of vibrational modes in both excited and ground electronic states. Fourier transformation reveals the frequencies of these modes. The strongest ICV mode with 570 nm excitation is the symmetric Fe-S stretching mode near 310 cm(-1), compared to 313 cm(-1) in the low temperature resonance Raman. If the rubredoxin is pumped at 520 nm, a set of strong bands occurs between 20 and 110 cm(-1). Finally, there is a mode at approximately 500 cm(-1) which is similar to features near 508 cm(-1) in blue Cu proteins that have been attributed to excited state vibrations. Normal mode analysis using 488 protein atoms and 558 waters gave calculated spectra that are in good agreement with previous nuclear resonance vibrational spectra (NRVS) results. The lowest frequency normal modes are identified as collective motions of the entire protein or large segments of polypeptide. Motion in these modes may affect the polar environment of the redox site and thus tune the electron transfer functions in rubredoxins.

Fourier Analysis↗

PubMed2006

Ultrafast pump-probe study of excited-state charge-transfer dynamics in umecyanin from horseradish root.

We have applied femtosecond pump-probe spectroscopy to investigate the excited-state dynamics of umecyanin from horseradish roots, by exciting its 600-nm ligand-to-metal charge-transfer band with a 15-fs pulse and probing over a broad range in the visible region. The decay of the pump-induced ground-state bleaching is modulated by clearly visible oscillations and occurs exponentially with a time constant depending on the observed spectral component of the transmission difference signal, ranging from 270 fs up to 700 fs. The slower decaying process characterizes the spectral component corresponding to the metal-to-ligand charge-transfer transition. The excited-state decay rate is significantly lower than in other blue copper proteins, probably because of the larger energy gap between ligand- and metal-based orbitals in umecyanin. Wavelength dependence of the recovery times could be due to either the excitation of several transitions or the occurrence of intramolecular vibrational relaxation within the excited state. We also find evidence of a hot ground-state absorption, at 700 nm, persisting for several picoseconds. The vibrational coherence induced by the ultrashort pump pulse allows vibrational activity to be observed, mainly in the ground state, as expected in a system with fast excited-state decay. However, we find evidence of a rapidly damped oscillation, which we assign to the excited state. Finally, the Fourier transform of the oscillatory component of the signal presents additional bands in the low-frequency region which are assigned to collective motions of the protein.

Armoracia↗

PubMed2006

Quenching and blinking of fluorescence of a single dye molecule bound to gold nanoparticles.

A fluorescein derivative (SAMSA) bound to gold nanoparticles of different diameters is investigated by time-resolved fluorescence at the single molecule level in a wide dynamic range, from nanosecond to second time scale. The significant decrease of both SAMSA excited state lifetime and fluorescence quantum yield observed upon binding to gold nanoparticles can be essentially traced back to an increase of the nonradiative deactivation rate, probably due to energy transfer, that depends on the nanoparticle size. A slow single molecule fluorescence blinking, in the ms time scale, has a marked dependence on the excitation intensity both under single and under two photon excitation. The blinking dynamics is limited by a low probability nonlinear excitation to a high energy state from which a transition to a dark state occurs. The results point out a strong coupling between the vibro-electronic configuration of the dye and the plasmonic features of the metal nanoparticles that provide dye radiationless deactivation channels on a wide dynamic range.

Biophysical Phenomena↗

PubMed2005

Optical spectroscopic investigation of the alkaline transition in umecyanin from horseradish root.

Umecyanin (UMC) from horseradish root belongs to the stellacyanin subclass of the phytocyanins, a family of plant cupredoxins. The protein possesses the typical type-1 His(2)Cys equatorial ligand set at its mononuclear copper site but has an axial Gln ligand in place of the usual weakly coordinated Met of the plantacyanins, uclacyanins, and most other cupredoxins. UMC exhibits, like other phytocyanins, altered visible, EPR, and paramagnetic (1)H NMR spectra at elevated pH values and also a modified reduction potential. This alkaline transition occurs with a pK(a) of approximately 10 [Dennison, C., Lawler, A. T. (2001) Biochemistry 40, 3158-3166]. In this study, we investigate the alkaline transition by complementary optical spectroscopic techniques. The contemporary use of absorption, fluorescence, dynamic light scattering, and resonance Raman spectroscopy allows us to demonstrate that the alkaline transition induces a reorganization of the protein and that the overall size of UMC increases, but protein aggregation does not occur. The transition does not have a dramatic influence on the active-site environment of UMC, but there are subtle alterations in the Cu site geometry. Direct evidence for the strengthening of a Cu-N(His) bond is presented, which is in agreement with the hypothesis that the deprotonation of the N(epsilon2)H moiety of one of the His ligands is the cause of the alkaline transition. A weakening of the Cu-S(Cys) bond is also observed which, along with a weakened axial interaction, must be due to the enhanced Cu-N(His) interaction.

Armoracia↗

PubMed2005

SERS and tunneling spectroscopy investigation of iron-protoporphyrin IX adsorbed on a silver tip.

Iron-protoporphyrin IX adsorbed on a scanning tunneling microscopy silver tip is investigated by combining surface enhancement Raman (SERS) and tunneling spectroscopies down to single molecule regime. Both the Raman signals and the tunneling current intensity reveal fast switching between the iron oxidation states and present analogous, significant fluctuations in time. The results point out the occurrence of a strong electronic coupling between the molecule and the metal, and may contribute to elucidate the dynamical phenomena at the molecule-metal interface, deserving some nanotechnological interest.

Protoporphyrins↗

PubMed2005

Lévy statistics of vibrational mode fluctuations of single molecules from surface-enhanced Raman scattering.

Surface-enhanced Raman spectra of a single Fe-protoporphyrin IX molecule display drastic fluctuations in frequency and intensity. When analyzed in their temporal evolution, the vibrational modes of the molecule undergo an on-off switching behavior that is shown to follow a Lévy statistics. Such a time dependent process may encode both the dynamics of the molecule-environment interactions and the intrinsic gating or activation of the mode emission mechanism.

Colloids↗

PubMed2005

Single-molecule detection of yeast cytochrome c by Surface-Enhanced Raman Spectroscopy.

The giant enhancement of Raman signal near silver colloidal nanoparticles is exploited to study the Raman spectrum of Cytochrome c from Saccharomyces cerevisiae (Yeast Cytochrome c--YCc) in the limit of single-molecule. The investigation is performed on proteins both in solution and immobilised onto a glass slide using a quasi resonant laser line as exciting source with low excitation intensity. In both cases, spectra acquired at different times exhibit dramatic temporal fluctuations in both the total spectrum and in the specific line intensity, even though averaging of several individual spectra reproduces the main Raman features of bulk YCc. Analysis of the spectral intensity fluctuations from solutions reveals a multimodal distribution of some specific Raman lines, consistent with the approaching of single molecule regime. Among other results, the statistical analysis of the spectra from immobilised samples seems to indicate dynamical processes involving the reorientational of the heme with respect to the metal surface.

Colloids↗

PubMed2004

Thermal stability of wild type and disulfide bridge containing mutant of poplar plastocyanin.

A comparative study of the thermal stability of wild type poplar plastocyanin and of a mutant form containing a disulfide bridge between residues 21 and 25 was performed using differential scanning calorimetry and optical spectroscopic techniques. For wild type plastocyanin the transition temperature, determined from the calorimetric profiles, is 62.7 degrees C at the scan rate of 60 degrees C/h, whereas for the mutant it is reduced to 58.0 degrees C. In both cases, the endothermic peak is followed by an exothermic one at higher temperatures. The unfolding process monitored by optical absorption at 596 nm also reveals a reduced thermal stability of the mutated plastocyanin compared to the wild type protein, with transition temperatures of 54.8 and 58.0 degrees C, respectively. For both proteins, the denaturation process was found to be irreversible and dependent on the scan rate preventing the thermodynamic analysis of the unfolding process. In parallel, small conformational changes between wild type and mutant plastocyanin emerge from fluorescence spectroscopy measurements. Here, a difference in the interaction of the two proteins between the microenvironment surrounding the fluorophores and the solvent was proposed. The destabilization observed in the disulfide containing mutant of plastocyanin suggests that the double mutation, Ile21Cys and Glu25Cys, introduces strain into the protein which offsets the stabilizing effect expected from the formation of a covalent crosslink.

Calorimetry, Differential Scanning↗

PubMed2004

Tip to substrate distances in STM imaging of biomolecules.

STM images of single biomolecules adsorbed on conductive substrates do not reproduce the expected physical height, which generally appears underestimated. This may cause the tip to interfere with the soft biological sample during the imaging scans. Therefore, a key requirement to avoid invasive STM imaging is the knowledge, and the control, of the initial tip to substrate distance. This is connected to the setting of the tunnelling current and applied voltage, which define a tunnelling resistance. The height of the STM tip was measured by calibrating the tunnelling resistance, as a function of its vertical displacement until establishing a mechanical contact. At a tunnelling resistance of 4 x 10(9)Omega, distances of about 3 and 6 nm are estimated when flat Au substrates are imaged in water and in air, respectively. On such a ground, the relevance of the starting tip-substrate distance in determining a non-invasive imaging has been investigated for a plastocyanin mutant chemisorbed on Au(111) electrodes. At tunnelling distances sufficient to overcome the physical height of the imaged biomolecules, their lateral dimensions are found to be consistent with the crystallography, whereas they are significantly broadened for smaller distances.

Animals↗

PubMed2003

Excited state charge-transfer dynamics study of poplar plastocyanin by ultrafast pump-probe spectroscopy and molecular dynamics simulation.

We have applied ultrafast pump-probe spectroscopy to investigate the excited state dynamics of the blue copper protein poplar plastocyanin, by exciting in the blue side of its 600-nm absorption band. The decay of the charge-transfer excited state occurs exponentially with a time constant of approximately 280 fs and is modulated by well visible oscillations. The Fourier transform of the oscillatory component, besides providing most of the vibrational modes found by conventional resonance Raman, presents additional bands in the low frequency region modes, which are reminiscent of collective motions of biological relevance. Notably, a high frequency mode at approximately 508 cm(-1), whose dynamics are consistent with that of the excited state and already observed for other blue copper proteins, is shown to be present also in poplar plastocyanin. This vibrational mode is reproduced by a molecular dynamics simulation involving the excited state of the copper site.

Computer Simulation↗

PubMed2003

Topological and electron-transfer properties of yeast cytochrome c adsorbed on bare gold electrodes.

The redox metalloprotein yeast cytochrome c was directly self-chemisorbed on "bare" gold electrodes through the free sulfur-containing group Cys102. Topological, spectroscopic, and electron transfer properties of the immobilised molecules were investigated by in situ scanning probe microscopy and cyclic voltammetry. Atomic force and scanning tunnelling microscopy revealed individual protein molecules adsorbed on the gold substrate, with no evidence of aggregates. The adsorbed proteins appear to be firmly bound to gold and display dimensions in good agreement with crystallographic data. Cyclic voltammetric analysis showed that up to 84% of the electrode surface is functionalised with electroactive proteins whose measured redox midpoint potential is in good agreement with the formal potential. Our results clearly indicate that this variant of cytochrome c is adsorbed on bare gold electrodes with preservation of morphological properties and redox functionality.

Computational Biology↗

PubMed2003

A combined atomic force microscopy and molecular dynamics simulation study on a plastocyanin mutant chemisorbed on a gold surface.

A mutant of copper plastocyanin, covalently bound to an Au (111) surface through an engineered disulfide bridge, was investigated in aqueous medium by atomic force microscopy (AFM) and molecular dynamics (MD) simulations. Tapping-mode AFM images revealed adsorption of single molecules which are homogeneously distributed over the substrate and strongly bound to gold and display uniform lateral size. A statistical analysis of the height of the macromolecules on the gold substrate evidenced a distribution around a mean value consistent with that expected from the crystallographic data and with a relatively large standard deviation. A 10-ns classical MD simulation of mutated plastocyanin, hydrated by a layer of water, covalently bound to a gold surface by one or two sulfur atoms, was performed. The simulations indicate that the bound protein retains, in both cases, its overall tertiary structure during the dynamic evolution. Moreover, the macro-molecule can assume different orientations with respect to the gold substrate, which give rise to a distribution of heights on the gold substrate. Experimental and MD simulation results are compared and discussed in connection with the topological and dynamical properties of the protein system.

Adsorption↗

PubMed2003

MD simulation of a plastocyanin mutant adsorbed onto a gold surface.

MD simulation of plastocyanin, an electron transfer protein, adsorbed onto a gold surface, has been performed for 10 ns. Starting from the crystallographic structure of a poplar plastocyanin mutant engineered with the insertion of a disulfide bridge, the protein has been anchored to a gold substrate modeled by a cluster of three layers in the Au<111> configuration. A number of significant structural and dynamical properties of the protein molecule, covalently bound through either one or two sulfur atoms to the gold surface, has been extracted and compared with those of the free protein. Attention has been paid to investigate the dynamical aspects putatively related to the electron transfer process. In particular, the cross-correlation function between specific active site vibrations and all the other protein atom motions and the principal component analysis have been calculated in order to put into evidence dynamical correlation of some functional relevance. The results are discussed also in connection with related experiments.

Absorption↗