PubMed Health⌕ Search

Biomedical subjects

Seeram Ramakrishna

Publications and source records attributed to Seeram Ramakrishna.

At least 19 recordsLinked to original sources

Nanobiomaterial applications in orthopedics.

Advancements in nanobiotechnology are revolutionizing our capability to understand biological intricacies and resolve biological and medical problems by developing subtle biomimetic techniques. Nanocomposites and nanostructured materials are believed to play a pivotal role in orthopedic research since bone itself is a typical example of a nanocomposite. This article reviews current strategies using nanobiomaterials to improve current orthopedic materials and examines their applications in bone tissue engineering. Preliminary investigations support the potential of nanobiomaterials in orthopedic applications; however, significant advancements are necessary to achieve clinical use. Overall, current trends in nanobiotechnology foreshadow a bright future through the use of nanobiomaterials in the orthopedic domain.

Biocompatible Materials↗

An aligned nanofibrous collagen scaffold by electrospinning and its effects on in vitro fibroblast culture.

Fabrication of nanofibrous scaffolds with well-defined architecture mimicking native extracellular matrix analog has significant potentials for many specific tissue engineering and organs regeneration applications. The fabrication of aligned collagen nanofibrous scaffolds by electrospinning was described in this study. The structure and in vitro properties of these scaffolds were compared with a random collagen scaffold. All the collagen scaffolds were first crosslinked in glutaraldehyde vapor to enhance the biostability and keep the initial nano-scale dimension intact. From in vitro culture of rabbit conjunctiva fibroblast, the aligned scaffold exhibited lower cell adhesion but higher cell proliferation because of the aligned orientation of fibers when compared with the random scaffold. And the alignment of the fibers may control cell orientation and strengthen the interaction between the cell body and the fibers in the longitudinal direction of the fibers.

Animals↗

Surface-aminated electrospun nanofibers enhance adhesion and expansion of human umbilical cord blood hematopoietic stem/progenitor cells.

Interaction between hematopoietic stem/progenitor cells (HSPCs) and their extra cellular matrix components is an integral part of the signaling control for HSPC survival, proliferation and differentiation. We hypothesized that both substrate topographical cues and biochemical cues could act synergistically with cytokine supplementation to improve ex vivo expansion of HSPCs. In this study, we compared the ex vivo expansion of human umbilical cord blood CD34(+) cells on unmodified, hydroxylated, carboxylated and aminated nanofibers and films. Results from 10-day expansion cultures showed that aminated nanofiber mesh and film were most efficient in supporting the expansion of the CD34(+)CD45(+) cells (195-fold and 178-fold, respectively), as compared to tissue culture polystyrene (50-fold, p<0.05). In particular, aminated nanofiber meshes supported a higher degree of cell adhesion and percentage of HSPCs, as compared to aminated films. SEM imaging revealed the discrete colonies of cells proliferating and interacting with the aminated nanofibers. This study highlights the potential of a biomaterials approach to influence the proliferation and differentiation of HSPCs ex vivo.

Amines↗

Biomaterials and scaffolds for ligament tissue engineering.

Tissue engineering has achieved much progress in an attempt to improve and recover impaired functions of tissues and organs. Although many studies have been done, progress for tissue-engineered anterior cruciate ligaments (ACLs) has been slow due to their complex structures and mechanical properties. In this review, the ACL anatomical structure, progresses achieved, material selection, structure design, and future direction have been discussed, while the challenges and requirements from materials and scaffolds are highlighted. There is a considerably huge amount work that needs to be carried out; as such, future direction in ligament tissue engineering is proposed in hope that this review will give information on future ligament tissue engineering.

Biocompatible Materials↗

Electrospun scaffold tailored for tissue-specific extracellular matrix.

The natural extracellular matrix (ECM) is a complex structure that is built to meet the specific requirements of the tissue and organ. Primarily consisting of nanometer diameter fibrils, ECM may contain other vital substances such as proteoglycans, glycosaminoglycan and various minerals. Current research in tissue engineering involves trying to replicate the ECM such that it provides the environment for tissue regeneration. Electrospinning is a versatile process that results in nanofibers by applying a high voltage to electrically charge a liquid. A variety of polymers and other substances have been incorporated into the artificial nanofibrous scaffold. Surface modification and cross-linking of the nanofibers are some ways to improve the biocompatibility and stability of the scaffold. Electrospun scaffolds with oriented nanofibers and other assemblies can be constructed by modifying the electrospinning setup. Using electrospinning, researchers are able to specifically tailor the electrospun scaffold to meet the requirements of the tissue that they seek to regenerate. In vitro and in vivo experiments demonstrate that electrospun scaffolds hold great potential for tissue engineering applications.

Animals↗

Biodegradable polymer nanofiber mesh to maintain functions of endothelial cells.

Maintaining functions of endothelial cells in vitro is a prerequisite for effective endothelialization of biomaterials as an approach to prevent intimal hyperplasia of small-diameter vascular grafts. The aim of this study was to design suitable nanofiber meshes (NFMs) that further maintain the phenotype and functions of human coronary artery endothelial cells (HCAECs). Collagen-coated random and aligned poly(L-lactic acid)-co-poly(epsilon-caprolactone) (P(LLA-CL)) NFMs were fabricated using electrospinning. Mechanical testing showed that tensile modulus and strength were greater for the aligned P(LLA-CL) NFM than for the random NFM. Spatial distribution of the collagen in the NFMs was visualized by labeling with fluorescent dye. HCAECs grew along the direction of nanofiber alignment and showed elongated morphology that simulated endothelial cells in vivo under blood flow. Both random and aligned P(LLA-CL) NFMs preserved phenotype (expression of platelet endothelial cell adhesion molecule-1, fibronectin, and collagen type IV in protein level) and functions (complementary DNA microarray analysis of 112 genes relevant to endothelial cell functions) of HCAECs. The P(LLA-CL) NFMs are potential materials for tissue-engineered vascular grafts that may enable effective endothelialization.

Absorbable Implants↗

Nano-featured scaffolds for tissue engineering: a review of spinning methodologies.

Tissue engineering is a multidisciplinary field that is rapidly emerging as a promising new approach in the restoration and reconstruction of imperfect tissues. In this approach, scaffolds play a pivotal role in supporting the cells to accommodate and guide their growth into a specific tissue; therefore, designing scaffolds that are favorable to cellular growth is of great importance. Electrospinning is a straightforward, cost-effective, and versatile technique that has been applied recently for the fabrication of nano-featured scaffolds suitable for tissue engineering. By mimicking a natural extracellular matrix, it offers many advantages over conventional scaffold methodologies. This paper reviews the current state of art of designing nanostructure scaffolds by using the electrospinning technique. Furthermore, an overview of this technique and its spinning mechanism is described, with special attention to areas of interest to the readers.

Animals↗

In vitro culture of human dermal fibroblasts on electrospun polycaprolactone collagen nanofibrous membrane.

Novel cost-effective electrospun nanofibrous membrane is established for wound dressing and allogeneic cultured dermal substitute through the cultivation of human dermal fibroblast for skin defects. Synthetic polymers are generally used for tissue engineering and drug delivery applications because of their remarkable mechanical stability and slow degradation. Polycaprolactone (PCL) is used as a bioresorbable polymer in numerous medical devices as well as for tissue engineering applications. The large surface area of the polymer nanofibers with specific modifications facilitates cell adhesion and control of their cellular functions. The objectives of this study was to fabricate electrospun nanofibrous membrane from biodegradable PCL for wound dressing and collagen-blended nanofibrous membrane, and to examine fibroblast attachment, cell proliferation, and morphology of cell matrix interaction. Results of the present investigation prove that the porous nanofibrous membrane is suitable for wound dressing and modified PCL-blended collagen nanofibrous membrane is suitable for the attachment and proliferation of fibroblast, and might have the potential to be applied in tissue engineering as a dermal substitute for the treatment of skin defects and burn wounds.

Biocompatible Materials↗

Micellization phenomena of biodegradable amphiphilic triblock copolymers consisting of poly(beta-hydroxyalkanoic acid) and poly(ethylene oxide).

This paper reports the studies on micelle formation of new biodegradable amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) (PEO-PHB-PEO) triblock copolymer with various PHB and PEO block lengths in aqueous solution. Transmission electron microscopy showed that the micelles took an approximately spherical shape with the surrounding diffuse outer shell formed by hydrophilic PEO blocks. The size distribution of the micelles formed by one triblock copolymer was demonstrated by dynamic light scattering technique. The critical micellization phenomena of the copolymers were extensively studied using the pyrene fluorescence dye absorption technique, and the (0,0) band changes of pyrene excitation spectra were used as a probe for the studies. For the copolymers studied in this report, the critical micelle concentrations ranged from 1.3 x 10(-5) to 1.1 x 10(-3) g/mL. For the same PEO block length of 5000, the critical micelle concentrations decreased with an increase in PHB block length, and the change was more significant in the short PHB range. It was found that the micelle formation of the biodegradable amphiphilic triblock copolymers consisting of poly(beta-hydroxyalkanoic acid) and PEO was relatively temperature-insensitive, which is quite different from their counterparts consisting of poly(alpha-hydroxyalkanoic acid) and PEO.

Hydroxybutyrates↗

Three-dimensional co-culture of rat hepatocyte spheroids and NIH/3T3 fibroblasts enhances hepatocyte functional maintenance.

Functional maintenance of primary hepatocytes in culture can be improved by several distinct approaches involving optimization of the extracellular matrix microenvironment, media composition and cell-cell interactions, both homotypic and heterotypic. Using a galactose-decorated surface, we have developed a method to combine these two approaches by co-culturing rat primary hepatocyte spheroids with NIH/3T3 mouse fibroblast cells. Spheroids were performed by culturing hepatocytes for 3 days on galactosylated poly(vinylidene difluoride) membrane; NIH/3T3 cells were subsequently seeded and co-cultured with the spheroids. Results showed that although NIH/3T3 cells alone responded poorly to the galactosylated PVDF surface and displayed limited attachment, NIH/3T3 fibroblasts attached to the periphery of the hepatocyte spheroids and proliferated around them. Co-cultured hepatocyte spheroids exhibited significantly higher liver-specific functions as compared to spheroids cultured alone. Albumin secretion level in this co-culture system peaked on day 11, which was 1.8- and 2.9-times higher than the peak expression level in spheroid homo-culture control in serum-free (day 3) and serum-containing media (day 4), respectively. The albumin secretion function was maintained for at least two weeks; it was 5.1 (in serum-free medium) and 17.8 (in serum-containing medium) times higher than spheroid homo-culture on day 13. Similarly, the co-culture system also expressed approximately 5.5- and 3.1-times higher 3-methylcholanthrene-induced cytochrome P450 enzymatic activity on day 14 as compared to the homo-culture control in serum-free and serum-containing medium, respectively. In conclusion, this unique co-culture system demonstrated the synergistic roles of homotypic cell-cell interaction, heterotypic cell-cell interaction, cell-substrate interaction and soluble stimuli in hepatocyte functional maintenance.

Animals↗

Electrospinning of gelatin fibers and gelatin/PCL composite fibrous scaffolds.

In this article, ultrafine gelatin (Gt) fibers were successfully produced with the use of the electrical spinning or electrospinning technique. A fluorinated alcohol of 2,2,2-trifluoroethanol (TFE) was used as the dissolving solvent. The morphology of the electrospun gelatin fibers was found to be dependent on the alteration of gelatin concentration ranging from 2.5% w/v to 12.5% w/v at 2.5% increment intervals. Based on the electrospun gelatin fibers obtained, 10% w/v gelatin/TFE solution was selected and mixed with 10% w/v poly(epsilon-caprolactone) (PCL) in TFE at a ratio of 50:50 and co-electrospun to produce gelatin/PCL composite membranes. Contact-angle measurement and tensile tests indicated that the gelatin/PCL complex fibrous membrane exhibited improved mechanical properties as well as more favorable wettability than that obtained from either gelatin or PCL alone. The gelatin/PCL fibrous membranes were further investigated as a promising scaffold for bone-marrow stromal cell (BMSC) culture. Scanning electron microscopy (SEM) and laser confocal microscopy observations showed that the cells could not only favorably attach and grow well on the surface of these scaffolds, but were also able to migrate inside the scaffold up to 114 microm within 1 week of culture. These results suggest the potential of using composite gelatin/PCL fibrous scaffolds for engineering three-dimensional tissues.

Animals↗

Recent development of polymer nanofibers for biomedical and biotechnological applications.

Research in polymer nanofibers has undergone significant progress in the last one decade. One of the main driving forces for this progress is the increasing use of these polymer nanofibers for biomedical and biotechnological applications. This article presents a review on the latest research advancement made in the use of polymer nanofibers for applications such as tissue engineering, controlled drug release, wound dressings, medical implants, nanocomposites for dental restoration, molecular separation, biosensors, and preservation of bioactive agents.

Bandages↗

Surface engineering of electrospun polyethylene terephthalate (PET) nanofibers towards development of a new material for blood vessel engineering.

Non-woven polyethylene terephthalate nanofiber mats (PET NFM) were prepared by electrospinning technology and were surface modified to mimic the fibrous proteins in native extracellular matrix towards constructing a biocompatible surface for endothelial cells (ECs). The electrospun PET NFM was first treated in formaldehyde to yield hydroxyl groups on the surface, followed by the grafting polymerization of methacrylic acid (MAA) initiated by Ce(IV). Finally, the PMAA-grafted PET NFM was grafted with gelatin using water-soluble carbodiimide as coupling agent. Plane PET film was also surface modified and characterized for basic understanding of the surface modification process. The grafting of PMAA and gelatin on PET surface was confirmed by XPS spectroscopy and quantitatively analyzed by colorimetric methods. ECs were cultured on the original and gelatin-modified PET NFM and the cell morphology, proliferation and viability were studied. Three characteristic surface makers expressed by ECs were studied using immuno-florescent microscopy. The gelatin grafting method can obviously improve the spreading and proliferation of the ECs on the PET NFM, and moreover, can preserve the EC's phenotype.

Biocompatible Materials↗

Stable immobilization of rat hepatocyte spheroids on galactosylated nanofiber scaffold.

Primary rat hepatocytes self-assemble into multi-cellular spheroids and maintain differentiated functions when cultured on a two-dimensional (2-D) substrate conjugated with galactose ligand. The aim of this study is to investigate how a functional nanofiber scaffold with surface-galactose ligand influences the attachment, spheroid formation and functional maintenance of rat hepatocytes in culture, as compared with the functional 2-D substrate. Highly porous nanofiber scaffolds comprising of fibers with an average diameter of 760 nm were prepared by electrospinning of poly(epsilon-caprolactone-co-ethyl ethylene phosphate) (PCLEEP), a novel biodegradable copolymer. Galactose ligand with a density of 66 nmol/cm(2) was achieved on the nanofiber scaffold via covalent conjugation to a poly(acrylic acid) spacer UV-grafted onto the fiber surface. Hepatocytes cultured on the galactosylated PCLEEP nanofiber scaffold exhibited similar functional profiles in terms of cell attachment, ammonia metabolism, albumin secretion and cytochrome P450 enzymatic activity as those on the functional 2-D substrate, although their morphologies are different. Hepatocytes cultured on galactosylated PCLEEP film formed 50-300 microm spheroids that easily detached from surface upon agitation, whereas hepatocytes cultured on galactosylated nanofiber scaffold formed smaller aggregates of 20-100 microm that engulfed the functional nanofibers, resulting in an integrated spheroid-nanofiber construct.

Adsorption↗

Fabrication of collagen-coated biodegradable polymer nanofiber mesh and its potential for endothelial cells growth.

Endothelialization of biomaterials is a promising way to prevent intimal hyperplasia of small-diameter vascular grafts. The aim of this study was to design a nanofiber mesh (NFM) that facilitates viability, attachment and phenotypic maintenance of human coronary artery endothelial cells (HCAECs). Collagen-coated poly(L-lactic acid)-co-poly(epsilon-caprolactone) P(LLA-CL 70:30) NFM with a porosity of 64-67% and a fiber diameter of 470+/-130 nm was fabricated using electrospinning followed by plasma treatment and collagen coating. The structure of the NFM was observed by SEM and TEM, and mechanical property was studied by tensile test. The presence of collagen on the P(LLA-CL) NFM surface was verified by X-ray photoelectron spectroscopy (XPS) and quantified by colorimetric method. Spatial distribution of the collagen in the NFM was visualized by labelling with fluorescent probe. The collagen-coated P(LLA-CL) NFM enhanced the spreading, viability and attachment of HCAECs, and moreover, preserve HCAEC's phenotype. The P(LLA-CL) NFM is a potential material for tissue engineered vascular graft.

Biocompatible Materials↗

In vitro study of human vascular endothelial cell function on materials with various surface roughness.

In recent years, creating a biodegradable polymer scaffold with an endothelialized surface has become an attractive concept for replacement of small-diameter blood vessels. Toward this end, a better understanding of the interaction between endothelial cells and biodegradable polymer substrates is particularly important. Surface roughness of biomaterials is one of the important parameters that affect cell behavior. In this study, human vascular endothelial cells were cultured on electrospun and solvent-cast poly(L-lactic acid) substrates with different surface roughness. Cell responses were evaluated via both qualitative examinations of cell morphology changes as well as quantitative assessment of cell adhesion and proliferation rate on the different substrates. The results proved that endothelial cell function was enhanced on the smooth solvent-cast surface rather than on the rough electrospun surface of poly(L-lactic acid). Together with our previous findings that electrospun substrates favor vascular smooth muscle cell behavior, it is possible to design a unique three-dimensional scaffold for application of tissue-engineered small-diameter vessel replacement by combining the fabrication technique of solvent casting and electrospinning.

Biocompatible Materials↗

Formation of collagen-glycosaminoglycan blended nanofibrous scaffolds and their biological properties.

The development of blended collagen and glycosaminoglycan (GAG) scaffolds can potentially be used in many soft tissue engineering applications since the scaffolds mimic the structure and biological function of native extracellular matrix (ECM). In this study, we were able to obtain novel nanofibrous collagen-GAG scaffolds by electrospinning collagen blended with chondroitin sulfate (CS), a widely used GAG, in a mixed solvent of trifluoroethanol and water. The electrospun collagen-GAG scaffold with 4% CS (COLL-CS-04) exhibited a uniform fiber structure with nanoscale diameters. A second collagen-GAG scaffold with 10% CS consisted of smaller diameter fibers but exhibited a broader diameter distribution due to the different solution properties in comparison with COLL-CS-04. After cross-linking with glutaraldehyde vapor, the collagen-GAG scaffolds became more biostable and were resistant to collagenase degradation. This is evidently a more favorable environment allowing increased proliferation of rabbit conjunctiva fibroblast on the scaffolds. Incorporation of CS into collagen nanofibers without cross-linking did not increase the biostability but still promoted cell growth. The potential of applying the nanoscale collagen-GAG scaffold in tissue engineering is significant since the nanodimension fibers made of natural ECM mimic closely the native ECM found in the human body. The high surface area characteristic of this scaffold may maximize cell-ECM interaction and promote tissue regeneration faster than other conventional scaffolds.

Animals↗

Electrospun nanofiber fabrication as synthetic extracellular matrix and its potential for vascular tissue engineering.

Substantial effort is being invested by the bioengineering community to develop biodegradable polymer scaffolds suitable for tissue-engineering applications. An ideal scaffold should mimic the structural and purposeful profile of materials found in the natural extracellular matrix (ECM) architecture. To accomplish this goal, poly (L-lactide-co-epsilon-caprolactone) [P(LLA-CL)] (75:25) copolymer with a novel architecture produced by an electrospinning process has been developed for tissue-engineering applications. The diameter of this electrospun P(LLA-CL) fiber ranges from 400 to 800 nm, which mimicks the nanoscale dimension of native ECM. The mechanical properties of this structure are comparable to those of human coronary artery. To evaluate the feasibility of using this nanofibrous scaffold as a synthetic extracellular matrix for culturing human smooth muscle cells and endothelial cells, these two types of cells were seeded on the scaffold for 7 days. The data from scanning electron microscopy, immunohistochemical examination, laser scanning confocal microscopy, and a cell proliferation assay suggested that this electrospun nanofibrous scaffold is capable of supporting cell attachment and proliferation. Smooth muscle cells and endothelial cells seeded on this scaffold tend to maintain their phenotypic shape. They were also found to integrate with the nanofibers to form a three-dimensional cellular network. These results indicate a favorable interaction between this synthetic nanofibrous scaffold with the two types of cells and suggest its potential application in tissue engineering a blood vessel substitute.

Biocompatible Materials↗