PubMed Health⌕ Search

Biomedical subjects

Seiji Shinkai

Publications and source records attributed to Seiji Shinkai.

At least 19 recordsLinked to original sources
PubMed2006

Highly enantioselective recognition of dicarboxylic acid substrates by the control of nonlinear responses.

An allosteric host, in which the molecular information of the chiral guest was precisely introduced, exhibits unconventional enantioselectivity toward the target enantiomer even under the conditions of a -20% enantiomeric excess (ee) mixture within a certain concentration window. This is effected by incorporation of the structural information of the enantiomer into the host and the utilization of multiple equilibrium.

Journal Article↗
PubMed2006

Beta-1,3-glucan polysaccharide (schizophyllan) acting as a one-dimensional host for creating supramolecular dye assemblies.

We have demonstrated that one-dimensional supramolecular dye assemblies with a uniform diameter can be created by utilizing schizophyllan (SPG) as a one-dimensional host. In the supramolecular nanofibers, the dye molecules are assembled into the different aggregation modes depending on the preparation procedures. The findings establish that SPG is useful for creating the supramolecular nanofibers, where temporal superstructures can be stabilized by the SPG-specific helical higher-order structure. [structure: see text].

Journal Article↗
PubMed2006

Face-selective decoration of an organic single crystal toward photochemical devices.

Face-selective decoration of a single crystal constructed from 1-pyrenemethylammonium chloride by an anionic porphyrin dye is reported. CLSM observations indicated that the {001} face of the single crystal was selectively coated by the anionic porphyrin (TPPS). This novel achievement could be the first step for preparation of multi-component composite materials mediated by anisotropy of organic single crystals toward photochemical devices.

Journal Article↗
PubMed2006

6-Amino-6-deoxy-chitosan. Sequential chemical modifications at the C-6 positions of N-phthaloyl-chitosan and evaluation as a gene carrier.

The C-6 positions of chitosan were successively modified in a highly regioselective manner. The starting material, N-phthaloyl-chitosan, was successfully converted into the corresponding 6-deoxy-6-halo derivatives by reaction with N-halosuccinimides and triphenylphosphine in N-methyl-2-pyrrolidone. The resulting chloride and bromide derivatives were then substituted with azido groups by reaction with sodium azide at 120 and 80 degrees C, respectively. The azido groups were then reduced to amines via formation of the triphenylphosphinimine intermediate followed by hydrolysis using aqueous hydrazine, which also led to the removal of the N-phthaloyl groups at the C-2 positions. This sequence gave 6-amino-6-deoxy-chitosan, which, unlike chitosan, is soluble in water at neutral pH. The synthesized 6-amino-6-deoxy-chitosan derivative was evaluated as a gene carrier, and the transfection efficiency for COS-1 cells was shown to be superior to chitosan. In addition, the cytotoxicity was similar to chitosan.

Animals↗
PubMed2006

Olefin metathesis of the aligned assemblies of conjugated polymers constructed through supramolecular bundling.

The ordered structures constructed from an aligner molecule 1o and conjugated polymers (CPs) were efficiently converted into the poly-pseudo-rotaxane structures by the template-assisted ring-closing olefin metathesis (RCM) of olefinic groups at the peripheral positions of 1o. Moreover, the poly-pseudo-rotaxane structures permitted the separation of the crystalline ordered assemblies of CP by size exclusion chromatography and the preservation of the sheet morphologies after the treatment with trifluoroacetic acid. The morphologies and the periodicities of assemblies were also maintained after the retrieving treatments.

Journal Article↗
PubMed2006

Axial coordination changes the morphology of porphyrin assemblies in an organogel system.

The gelation properties of a zinc porphyrin bearing peripheral urea groups (1 x Zn) were evaluated in the absence and the presence of several diamines. In aromatic solvents such as benzene, toluene and p-xylene, 1 x Zn only provided the precipitate. In contrast, 1 x Zn with 0.5 and 1.0 equiv. of piperazine formed gels, and the gel with 0.5 equiv. of piperazine showed a unique physical property called 'thixotropy'. On the other hand, upon addition of similar diamines such as DABCO, ethylenediamine and N,N'-dimethylethylenediamine, 1 x Zn did not gelate these solvents. When the critical gelation concentration was plotted against the ratio of piperazine versus 1 x Zn, it afforded a minimum breakpoint at 0.5 equiv. and the critical concentration increased with further increase in the fraction of piperazine, indicating that the stable gel is formed from the 1 x Zn + piperazine 2:1 complex and the subsequent transformation to the 1:1 complex rather destabilizes the gel. Very interestingly, it was clearly shown by SEM and TEM observations that such structural changes of the unit complex induced by the ratio of piperazine versus 1 x Zn can lead to gradual morphological transitions: that is, spherical structure at 0 equiv., 1-D fibrous structure at 0.5 equiv. and 2-D sheet-like structure at 1.0 equiv. In addition, UV-VIS spectra revealed that 1 x Zn itself adopts a J-aggregation mode, whereas 1 x Zn + piperazine 2:1 and 1:1 complexes adopt an H-like aggregation mode. On the other hand, upon addition of 0.5 equiv. of other diamines, 1 x Zn + diamine complexes result in different morphologies other than the 1-D fibrous structure. To explore a reasonable rationale for these results, we conducted computational studies. As a result, we found that the complex symmetry of the unit complex plays an important role in determining the final ordered structure.

Diamines↗
PubMed2005

Control of self-aggregation of fullerenes by connection with calix[4]arene: solvent- and guest-effects to particle size.

A new molecular design of fullerene derivatives exhibiting trigger-responsive self-aggregation in organic solvents has been established. Calix[4]arene was covalently connected with fullerene in order to apply host-guest interaction to the aggregation control. The self-assembly behaviour was studied in organic solvents by UV-vis absorption spectroscopy, dynamic light scattering and transmission electron microscopy. Results show that the bisfullerene formed self-aggregations with a low polydispersity index due to the fullerenes' tendency to aggregate in polar organic solvents. Furthermore, the aggregate sizes can be changed readily by solvent composition and the addition of guest cations. Especially, disaggregation of the bisfullerene was induced by addition of LiClO4 or NaClO4.

Journal Article↗
PubMed2005

CpG DNA/zymosan complex to enhance cytokine secretion owing to the cocktail effect.

Zymosan, classified among beta-(1-->3)-d-glucans, is produced from the cell wall of yeast and well known to induce proinflammatory cytokines when ingested by immune cells. We found that zymosan forms a complex with immunostimulatory CpG DNA, where both zymosan and CpG DNA can induce cytokine secretion according to the different mechanisms (i.e., recognized by different receptors). The complex activated macrophages and induced cytokine secretion, more efficiently than separate administration of zymosan or CpG DNA. Microscopic observation showed that this increment of the cytokine secretion can be explained by the fact that zymosan and zymosan/CpG DNA complex are up-taken more than naked CpG DNA. Additionally, existence of two different immunostimulants in the same cells may enhance the immunoresponse. This report presents a new strategy to construct a delivering vehicle for CpG DNA and to enhance its activity with the 'cocktail effect' of the two immunostimulants.

Animals↗
PubMed2005

'Click chemistry' on polysaccharides: a convenient, general, and monitorable approach to develop (1-->3)-beta-D-glucans with various functional appendages.

(1-->3)-beta-D-Glucans having various functional appendages (lactoside, ferrocene, pyrene, and porphyrin) can be prepared in an convenient, quantitative, and regioselective manner through regioselective bromination-azidation of curdlan to afford 6-azido-6-deoxycurdlan followed by chemoselective [3+2]-cycloadditions with various functional modules bearing a terminal alkyne group. The ability to monitor reaction conversions is an additional advantage of this synthetic approach over the conventional direct modifications on polysaccharides; the reaction can be readily monitored based on the intensity of azido peaks in the in situ attenuated total reflection infrared spectra.

Alkynes↗
PubMed2005

Poly(diacetylene)-nanofibers can be fabricated through photo-irradiation using natural polysaccharide schizophyllan as a one-dimensional mold.

Schizophyllan interacts with various 1,4-diphenylbutadiyne derivatives to induce their chirally-twisted packing. A series of referential experiments using other polysaccharides (amylose, pullulan, dextran, etc.) and a carbohydrate-appended detergent (dodecyl-beta-d-glucopyranoside) indicates that these 1,4-diphenylbutadiyne derivatives are accommodated within a tubular cavity constructed by a helical superstructure of schizophyllan. In these 1,4-diphenylbutadiyne derivatives, 1,4-bis(p-propionamidophenyl)butadiyne can be easily polymerized through UV-irradiation, in which schizophyllan acts as a one-dimensional mold to produce the corresponding poly(diacetylene)s with fibrous morphologies. Detailed investigations on this unique approach to prepare the nanofibers revealed that it includes two individual processes, that is, 1) UV-mediated polymerization of encapsulated 1,4-bis(p-propionamidophenyl)butadiyne to produce immature nanofibers and 2) their reorganization through hydrophobic interfiber interactions into ordered nanofibers. The other 1,4-diphenylbutadiyne derivatives could not be polymerized through UV-irradiation, indicating that the p-propionamido-functionalities play substantial roles for a suitable packing of the monomer for the polymerization. The other 1,4-diphenylbutadiyne derivatives, however, can be also polymerized through gamma-ray irradiation in the presence of schizophyllan to give the corresponding poly(diacetylene)-nanofibers, emphasizing the wide applicability of the schizophyllan-based strategy for polymerization of various 1,4-diphenylbutadiyne derivatives.

Acetylene↗