Biomedical subjects

Seizaburo Shiraga

Publications and source records attributed to Seizaburo Shiraga.

6 recordsLinked to original sources

PubMed2006

Analysis of a processing system for proteases using yeast cell surface engineering: conversion of precursor of proteinase A to active proteinase A.

The display of a protease, carboxypeptidase Y (CPY) or procarboxypeptidase Y (proCPY), which is the vacuolar protease, on the yeast-cell surface was successfully performed using yeast-cell-surface engineering for the first time. Through that we could confirm the processing of vacuolar proteases containing proteinase A (PrA) and proteinase B (PrB) which are related to the maturation of proCPY, using a novel cell-surface engineering technique. Various protease-knockout strains of Saccharomyces cerevisiae with the CPY-displaying system were constructed to evaluate the operation of the activation process of CPY. The display of CPY (CPY-agg, which is a fusion protein of CPY with C-terminal half of alpha-agglutinin) on the cell surface was confirmed by immunofluorescence staining. The activity of the CPY-agg was determined after the conversion of proCPY to active CPY by treatment of whole cells with proteinase K. In the proCPY-displaying CPY-knockout strain and PrB-knockout strain, CPY was displayed as an active (mature) form, but in the proCPY-displaying PrA-knockout strain, CPY was present as an inactive form (proCPY). These facts indicate that PrA had been already activated before its transport to the vacuole and that active mature PrA might convert proCPY to CPY before the transport of proCPY to the vacuole. From these results, it was suggested that by using the yeast-cell-surface engineering at the location of the initial step, the autocatalytic activation from proPrA to PrA might occur before the vacuolar branch separates from the main secretory pathway.

Antigens, Surface↗

PubMed2005

Creation of Rhizopus oryzae lipase having a unique oxyanion hole by combinatorial mutagenesis in the lid domain.

Combinatorial libraries of the lid domain of Rhizopus oryzae lipase (ROL; Phe88Xaa, Ala91Xaa, Ile92Xaa) were displayed on the yeast cell surface using yeast cell-surface engineering. Among the 40,000 transformants in which ROL mutants were displayed on the yeast cell surface, ten clones showed clear halos on soybean oil-containing plates. Among these, some clones exhibited high activities toward fatty acid esters of fluorescein and contained non-polar amino acid residues in the mutated positions. Computer modeling of the mutants revealed that hydrophobic interactions between the substrates and amino acid residues in the open form of the lid might be critical for ROL activity. Based on these results, Thr93 and Asp94 were further combinatorially mutated. Among 6,000 transformants, the Thr93Thr, Asp94Ser and Thr93Ser, Asp94Ser transformants exhibited a significant shift in substrate specificity toward a short-chain substrate. Computer modeling of these mutants suggested that a unique oxyanion hole, which is composed of Thr85 Ogamma and Ser94 Ogamma, was formed and thus the substrate specificity was changed. Therefore, coupling combinatorial mutagenesis with the cell surface display of ROL could lead to the production of a unique ROL mutant.

Amino Acid Sequence↗

PubMed2005

Construction of a selective cleavage system for a protein displayed on the cell surface of yeast.

We constructed a novel protein-purification system in which Saccharomyces cerevisiae with a protein displayed on the cell surface is harvested and the displayed protein is then cleaved from the cell surface. GFPuv was used as a model protein in this cell surface engineering experiment. In this system, the C-terminal 320 amino acids of alpha-agglutinin were bound to the C-terminal of GFPuv for display on the cell surface. In this novel system, the insertion of the recognition sequence-encoding gene of protease factor Xa between GFPuv and alpha-agglutinin was successfully carried out. The GFPuv, displayed by the insertion, was successfully cleaved from yeast cell surface by treatment with factor Xa, and could be easily recovered. By removing such a protease with well-known properties, the displayed protein could be isolated and purified with relative ease.

Base Sequence↗

PubMed2005

Enhanced reactivity of Rhizopus oryzae lipase displayed on yeast cell surfaces in organic solvents: potential as a whole-cell biocatalyst in organic solvents.

Immobilization of enzymes on some solid supports has been used to stabilize enzymes in organic solvents. In this study, we evaluated applications of genetically immobilized Rhizopus oryzae lipase displayed on the cell surface of Saccharomyces cerevisiae in organic solvents and measured the catalytic activity of the displayed enzyme as a fusion protein with alpha-agglutinin. Compared to the activity of a commercial preparation of this lipase, the activity of the new preparation was 4.4 x 10(4)-fold higher in a hydrolysis reaction using p-nitrophenyl palmitate and 3.8 x 10(4)-fold higher in an esterification reaction with palmitic acid and n-pentanol (0.2% H2O). Increased enzyme activity may occur because the lipase displayed on the yeast cell surface is stabilized by the cell wall. We used a combination of error-prone PCR and cell surface display to increase lipase activity. Of 7,000 colonies in a library of mutated lipases, 13 formed a clear halo on plates containing 0.2% methyl palmitate. In organic solvents, the catalytic activity of 5/13 mutants was three- to sixfold higher than that of the original construct. Thus, yeast cells displaying the lipase can be used in organic solvents, and the lipase activity may be increased by a combination of protein engineering and display techniques. Thus, this immobilized lipase, which is more easily prepared and has higher activity than commercially available free and immobilized lipases, may be a practical alternative for the production of esters derived from fatty acids.

Agglutinins↗

PubMedDate not supplied

Construction of a cultivation system of a yeast single cell in a cell chip microchamber.

A novel single cell screening system was constructed using a yeast cell chip in combination with the yeast cell surface engineering [NanoBiotechnology 2005, 1, 105-111]. Enzymes or functional proteins displayed on a yeast cell surface can be used as a protein cluster. To achieve high-throughput screening of protein libraries on the cell surface, a catalytic reaction by a single cell-surface-engineered yeast cell was successfully carried out in the microchamber on the yeast cell chip. After screening, to replicate a target cell for use in measuring of activity, DNA sequencing, and preservation, a novel single cell cultivation system in the yeast cell chip was constructed. To avoid damage of the rapid dry up of medium in the microchamber array, the yeast cell chip was modified with a protection sheet, so that the modified chip was like a micro-culture tank constructed on the yeast cell chip microchamber. As a result, single yeast cell cultivation in the yeast cell chip microchamber was observed, and the modified yeast cell chip was evaluated to be good for a single cell selection. The improvement showed that the single cell screening system coupled with the single cell cultivation using the modified yeast cell chip may be superior to that by a cell sorter for the isolation of a target cell and its practical use.

Cell Count↗

PubMedDate not supplied

Enhancement of cellulase activity by clones selected from the combinatorial library of the cellulose-binding domain by cell surface engineering.

To improve the cellulolytic activity of a yeast strain displaying endoglucanase IotaIota (EG II) from Trichoderma reesei, a combinatorial library of the cellulose-binding domain (CBD) of EG II was constructed by using cell surface engineering. When EG II degrades celluloses, CBD binds to cellulose, and its catalytic domain cleaves the glycosidic bonds of cellulose. CBD had a flat face, composed of five amino acids for binding. It was supposed that the three hydrophobic amino acid residues of the five amino acid residues were essential for binding to cellulose. Therefore, by improving the two remaining amino acid residues, construction of mutants with a combinatorial library of the two amino acids in CBD was carried out and binding ability and hydrolysis activity were measured. In the first screening by halo assay using the Congo Red staining method, about 200 of the 2000 colonies formed clear halos, and then five colonies with the clearest halos were finally selected. In the second screening, the binding ability of the five mutants to phosphoric acid-swollen Avicel was measured. In addition, the measurement of hydrolysis activity toward carboxymethylcellulose (CMC) using the screened mutants was carried out. As a result, the mutated EG II exhibiting higher binding ability (1.5-fold) had higher hydrolysis activity (1.3-fold) compared to the parent EG II-displaying yeast cell, demonstrating that CBD has confirmatively some effect on the cellulase activity through its binding ability of the enzyme to cellulose.

Binding Sites↗