Biomedical subjects

Serge Rudaz

Publications and source records attributed to Serge Rudaz.

At least 19 recordsLinked to original sources

PubMed2006

Recent developments in liquid chromatography--impact on qualitative and quantitative performance.

In order to reduce the analysis time and maintain good efficiency in liquid chromatography (LC), several solutions are currently being investigated. The focus of this study was to compare, both qualitatively and quantitatively, the chromatographic performance of a conventional LC with selected approaches, namely monolithic supports, high temperature LC (up to 90 degrees C), and sub-2 microm particles combined with high pressure (up to 1000 bar). This comparison was achieved from a qualitative point of view with a special attention paid to the analysis of time reduction, efficiency improvement, and pressure constraint. For this purpose, the different approaches were discussed using Knox curves and other kinetic plots. It appeared that columns packed with sub-2 microm particles under high-pressure conditions (UPLC) were well adapted and this option represents an attractive alternative to conventional LC; however, the other alternative approaches should not be neglected. The quantitative evaluation of these techniques was performed on the basis of the validation of results of a pharmaceutical formulation (Rapidocaïne), following SFSTP 2003 guidelines. Fast-LC approaches demonstrated equivalent performance to conventional LC in terms of trueness, precision, and accuracy profile, with a significant time reduction (up to 8x) according to the selected methodology.

Chromatography, Liquid↗

PubMed2006

Evaluation of the influence of protein precipitation prior to on-line SPE-LC-API/MS procedures using multivariate data analysis.

Matrix effects on mass spectrometry (MS) response were investigated with three atmospheric pressure ionization (API) sources after on-line solid-phase extraction (SPE) of human plasma. On-line SPE was evaluated with one restricted access material (RAM), two large particle supports (LPS) and one monolith. A sample protein precipitation (PP) with acetonitrile (2:1) and a direct injection were tested. Principal component analysis (PCA) was performed to simplify data presentation and interpretation. Protein precipitation was found to be mandatory for reducing signal modification. Regarding sensitivity towards matrix effects after PP, atmospheric pressure photoionization (APPI) was globally the least sensitive ionization mode while electrospray ionization ESI was the most sensitive.

Alanine↗

PubMed2006

Characterization and comparison of the chromatographic performance of different types of reversed-phase stationary phases.

The chromatographic performance of several base-deactivated stationary phases was evaluated with a specific chromatographic test. Seven basic test compounds, possessing different physico-chemical properties were injected on different supports with two mobile phases: one at pH 7.0 (acetonitrile-phosphate buffer, 40:60, v/v), and the other at pH 3.0 (acetonitrile-phosphate buffer, 15:85, v/v). Chromatographic parameters obtained under these conditions were treated by principal component analysis (PCA) to separate base deactivated supports according to their silanol activity (pH 7.0 mobile phase) and hydrophobic properties (pH 3.0 mobile phase). The information given by the specific test column evaluation was improved with complementary chemometric tools such as hierarchical cluster analysis. The same base deactivated supports were also tested following a general test procedure issued from the literature and obtained fundamental properties (in particular silanol activity and hydrophobicity) were compared with column evaluation obtained with the specific test: results were in good agreement, although the use of the specific test offered a better differentiation between numerous base-deactivated supports.

Chemical Phenomena↗

PubMed2006

Chromatographic behaviour and comparison of column packed with sub-2 microm stationary phases in liquid chromatography.

In order to reduce the analysis time and maintain good efficiency in liquid chromatography, it is advisable to simultaneously decrease the column length and the particle size of the chromatographic support. Therefore, several manufacturers have developed and commercialized short columns filled with particles that have a diameter smaller than 2 microm. The focus of this work was to check the chromatographic performance of such columns and compare possibilities offered by sub-2 microm supports with conventional columns in terms of analysis time reduction and efficiency improvements. For this purpose, different parameters were discussed namely: separation impedance (E), Knox curves (h,v), and number of plates by time unit (N/t0). Kinetic plots were also drawn. It appeared that sub-2 microm supports were well adapted to improve chromatographic performance and to reduce the analysis time. Furthermore, it was also demonstrated that the best chromatographic performances were reached with high pressure systems (up to 1000 bar).

Chromatography, Liquid↗

PubMed2006

Nonaqueous capillary electrophoresis method for the enantiomeric purity determination of S-timolol using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin: validation using the accuracy profile strategy and estimation of uncertainty.

Nonaqueous capillary electrophoresis (NACE) was successfully applied to the enantiomeric purity determination of S-timolol maleate using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin (HDMS-beta-CD) as chiral selector. With a background electrolyte made up of a methanolic solution of 0.75 M formic acid, 30 mM potassium camphorsulfonate and containing 30 mM HDMS-beta-CD, the determination of 0.1% of R-timolol in S-timolol could be performed with an enantiomeric resolution of 8.5. Pyridoxine was selected as internal standard. The NACE method was then fully validated by applying a novel strategy using accuracy profiles. It is based on beta-expectation tolerance intervals for the total measurement error which includes trueness and intermediate precision. The uncertainty of measurements derived from beta-expectation tolerance intervals was estimated at each concentration level of the validation standards. To confirm the suitability of the developed and validated method, several real samples of S-timolol maleate containing R-timolol maleate at different concentrations were analysed and the results were compared to those obtained by liquid chromatography.

Antihypertensive Agents↗

PubMed2006

Practical constraints in the kinetic plot representation of chromatographic performance data: theory and application to experimental data.

It is demonstrated that the kinetic plot representation of experimental plate height data can also account for practical constraints on the column length, the peak width, the viscous heating, and the mobile-phase velocity without needing any iterative solution routine. This implies that the best possible kinetic performance to be expected from a given tested support under any possible set of practical optimization constraints can always be found using a directly responding calculation spreadsheet template. To show how the resulting constrained kinetic plots can be used as a powerful design and selection tool, the method has been applied to a series of plate height measurements performed on a number of different commercial columns for the same component (butyl-parabene) and mobile-phase composition. The method, for example, allows one to account for the fact that the advantageous solutions displayed by the silica monolith and 5 microm particle columns in the large plate number range of the free kinetic plot are no longer accessible if applying a maximal column length constraint of Lmax = 30 cm. In the plate number range that remains accessible, the investigated sub-2 mum particle columns in any case perform (at least for the presently considered parabene separation) better than the 3.5 mum particle columns or silica monolith, especially if considering the use of system pressures exceeding 400 bar. The constrained kinetic plot method can also be used to select the best-suited column length from an available product gamma to perform a separation with a preset number of plates. One of the optimization results that is obtained in this case is that sometimes a significant gain in analysis time can be obtained by selecting a longer column, yielding the desired plate number at a larger velocity than that for a shorter column.

Algorithms↗

PubMed2006

A fast LC-APCI/MS method for analyzing benzodiazepines in whole blood using monolithic support.

A simple and fast procedure was developed for the simultaneous determination of eight benzodiazepines (BZDs) in whole blood using liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry (LC-APCI-MS). Sample pretreatment was carried out using a simple liquid-liquid extraction (LLE) with n-butylchloride, and chromatographic separation was performed using a monolithic silica column to speed up the analytical process. APCI and electrospray ionization (ESI) were compared. Whereas both ionization techniques appeared suitable for BZDs, APCI was found to be slightly more sensitive, especially for the determination of frequently low-dosed compounds. The method was validated according to the guidelines of the "Société Française des Sciences et Techniques Pharmaceutiques" (SFSTP) in the concentration range of 2.5-500 microg/L. The limit of quantification (LOQ) was 2.5 microg/L for all the compounds. Validation data including linearity, precision, and trueness were obtained, allowing subtherapeutic quantification of frequently low-dosed BZDs. The high selectivity of the mass spectrometer, along with the properties of the monolithic support, allowed unequivocal analysis of the eight compounds in less than 5 min. To demonstrate the potential of the method, it was used for the analysis of benzodiazepines in postmortem blood samples.

Atmospheric Pressure↗

PubMed2006

Enhanced method performances for conventional and chiral CE-ESI/MS analyses in plasma.

Due to its high efficiency, selectivity, and sensitivity, CE-ESI/MS has evolved as an efficient technique for the drugs and metabolites analysis in biological matrices. However, a sample preparation is mandatory prior to CE-ESI/MS analysis. To achieve fast and simplified sample preparation of plasma samples, protein precipitation (PP) and liquid-liquid extraction (LLE) were used with two injection techniques: hydrodynamic (HD) and electrokinetic (EK) injection. CE-ESI/MS analyses of pharmaceutical compounds and amphetamine derivatives were developed. Detection limits of 1 ppm were reached with PP and HD injection whereas 1 ppb was detected when samples were prepared with LLE and injected by EK. Same experiments were performed for stereoselective determinations in partial-filling mode and detection limits achieved were equivalent to conventional analysis (0.5 ppb per enantiomer). When complex matrices are analyzed, MS signal suppression or enhancement effects are generally not reproducible and could compromise results with ESI. Therefore, matrix effect was investigated in CE-ESI/MS with a commercially available coaxial sheath-liquid ESI interface used as postcapillary infusion system to determine MS signal alterations. Matrix effects were differentially evidenced according to the selected sample preparation. With PP, signal suppression was observed out of the analyses migration window, while for LLE no relevant matrix effect occurred in all experiments.

Amphetamines↗

PubMed2006

Interlaboratory study of a NACE method for the determination of R-timolol content in S-timolol maleate: assessment of uncertainty.

Analyses of statistical variance were applied to evaluate the precision and practicality of a CD-based NACE assay for R-timolol after enantiomeric separation of R- and S-timolol. Data were collected in an interlaboratory study by 11 participating laboratories located in Europe and North America. General qualitative method performance was examined using suitability descriptors (i.e. resolution, selectivity, migration times and S/N), while precision was determined by quantification of variances in the determination of R-timolol at four different impurity levels in S-timolol maleate samples. The interlaboratory trials were designed in accordance with the ISO guideline 5725-2. This allowed estimating for each sample, the different variances, i.e. between-laboratory (s2(Laboratories)), between-day (s2(Days)) and between-replicate (s2(Replicates)). The variances of repeatability (s2r) and reproducibility (s2R) were then calculated. The estimated uncertainty, derived from the precision estimates, seems to be concentration-dependent above a given threshold. This example of R-timolol illustrates how a laboratory can evaluate uncertainty in general.

Adrenergic beta-Antagonists↗

PubMed2006

Fast analysis in liquid chromatography using small particle size and high pressure.

In order to enhance chromatographic performances in terms of efficiency and rapidity, LC has recently evolved in the development of short columns packed with small particles (sub-2 microm) working at high pressures (> 400 bar). This approach has been described 30 years ago according to the fundamental chromatographic equations. However, systems and columns compatible with such high pressures have been introduced in the market in 2004 only. Advantages of small particles working at high pressure will be discussed in terms of sensitivity, efficiency, resolution, and analysis time. Potential problems encountered with high pressure in terms of frictional heating and solvent compressibility will also be discussed even if systems working at a maximum pressure of 1000 bar are not influenced by these parameters and give reliable and reproducible results. Several applications will highlight the potential and interest of this new technology.

Chromatography, Liquid↗

PubMed2005

Strategies for rapid chiral analysis by capillary electrophoresis.

The aim of this study was to investigate four strategies to decrease chiral CE analysis time: (1) short-end injection technique, (2) high electric field through a capillary length reduction, (3) external pressure application and (4) capillary dynamically coated to generate an important electroosmotic flow. These approaches were applied for a simultaneous enantiomeric separation of amphetamine and four related compounds using a neutral derivatised cyclodextrin (hydroxypropyl-beta-cyclodextrin) as chiral selector. Analysis time and CE performances, in terms of peak efficiency and resolution, were examined. Among the investigated strategies, the dynamic coating procedure appeared to be the most suitable approach to decrease analysis time (inferior to 7 min) and improve sensitivity. Furthermore, it exhibited very good migration time repeatability (0.1%). This benefit is of utmost interest in chiral analysis for an unambiguous peak identification, especially for a complex mixture such as reported in this study.

Amphetamines↗

PubMed2005

A study of interlaboratory influence on column evaluation.

A liquid chromatography method for the characterization of base deactivated columns was investigated in a collaborative study involving six laboratories. This work was carried out on two chromatographic supports (Xterra RP 18 and Symmetry Shield). Different cooling systems, namely water bath and air oven, were tested and it was shown that column thermoregulation did not significantly influence chromatographic data. In order to control the mobile phase composition, the latter was prepared by weight rather than volume. Thanks to the injection of a set of selected neutral compounds, extra-column effects were evaluated in each of the participating laboratories. The results showed that chromatographic supports tested in different laboratories and following the same test protocol could be effectively compared.

Chromatography, High Pressure Liquid↗

PubMed2005

Analysis of cocaine and three of its metabolites in hair by gas chromatography-mass spectrometry using ion-trap detection for CI/MS/MS.

A sensitive GC/CI/MS/MS method was developed for the simultaneous determination of cocaine (COC), anhydroecgonine methylester (cocaine pyrolysis product, AEME), ecgonine methylester (cocaine enzymatic hydrolysis product, EME) and cocaethylene (cocaine with ethanol trans-esterification product, COET) in human hair samples. After acid hydrolysis, hair samples were extracted with an automated solid phase extraction (SPE). The analysis of cocaine and its three metabolites was performed using an ion-trap spectrometer in positive chemical ionization with isobutane as gas reagent. The procedure was validated. Weighted linear regression was found appropriate in a concentration range of 0.10-5.00 ng/mg for AEME, 0.05-5.00 ng/mg for COC, EME and COET. The limit of detection was estimated at 0.005 ng/mg for COC and COET, at 0.025 ng/mg for EME, and at 0.050 ng/mg for AEME. Method performance was evaluated in terms of trueness and precision using quality control (QC) samples over the investigated ranges. Method selectivity and robustness were also demonstrated.

Adolescent↗

PubMed2005

Decreasing analysis time in capillary electrophoresis: validation and comparison of quantitative performances in several approaches.

Capillary electrophoresis (CE) can be used for the rapid determination of pharmaceuticals, particularly in routine quality control analysis. This paper focuses on several approaches aimed at decreasing the analysis time with commercially available instrumentation by (i) application of a high electric field through a reduced capillary, (ii) use of a dynamically coated capillary to increase the electroosmotic flow, (iii) short-end injection (SEI) technique, and (iv) application of multiple sample injections. Moreover, SEIs were combined with the three other approaches. A pharmaceutical formulation containing lidocaine as an active component was selected, and the methods were validated according to the ICH guidelines. The seven approaches investigated fulfilled different statistical requirements and demonstrated their linearity and trueness, with good recoveries and confidence limits always inferior to 1.5%. Furthermore, relative standard deviation (RSD) values for repeatability and intermediate precision were inferior to 1.1 and 1.8%, respectively. These results confirmed that each approach is of utmost interest to increase the analyte throughput in CE.

Electrophoresis, Capillary↗

PubMed2005

Rapid stereoselective separations of amphetamine derivatives with highly sulfated gamma-cyclodextrin.

The highly sulfated gamma-CD (HS-gamma-CD) is a chiral selector widely used in CE for the enantioseparation of pharmaceutical compounds. This paper investigated different approaches to reduce the stereoselective analysis time of amphetamine (AT) derivatives according to the chiral selector concentration in the BGE. With high HS-gamma-CD concentration, tested analytes were separated in 3.5 min as anionic complexes with short-end injection technique in reversed polarity mode. However, this procedure presented some limitations in terms of efficiency and resolution, excessive Joule heating and poor compatibility with MS detection. With low HS-gamma-CD concentration, compounds were separated as cations. Conventional approaches to reduce CE analysis time demonstrated critical resolution between some analytes. Therefore, the use of the partial-filling technique compatible with MS detection was carried out. Under optimized conditions, the analysis time for the chiral separation of seven AT like compounds was reduced to 6 min. Moreover, sensitivity of CE-MS was sufficient for the determination of ATs in plasma following a simple liquid-liquid extraction.

Amphetamines↗

PubMed2005

Enantioseparation of baclofen with highly sulfated beta-cyclodextrin by capillary electrophoresis with laser-induced fluorescence detection.

The enantioseparation of baclofen (4-amino-3-p-chlorophenylbutyric acid) was achieved by CE-LIF with highly sulfated beta-CD (HS-beta-CD) as chiral selector. Naphthalene-2,3-dicarboxaldehyde was used for the derivatization of nonfluorescent baclofen. HS-beta-CD (2%) containing 50 mM borate buffer at pH 9.5 was chosen as the optimal running electrolyte and applied to the analysis of baclofen enantiomers in human plasma. The linearity of calibration curves (R2 > or = 0.998) for R-(-) and S-(+)-baclofen was in the 0.1-2.0 microM concentration range. After a simple ACN-protein precipitation, the LOD of baclofen in plasma sample was found as low as 50 nM.

Baclofen↗

PubMed2005

Novel RPLC stationary phases for lipophilicity measurement: solvatochromic analysis of retention mechanisms for neutral and basic compounds.

An RPLC was developed to rapidly determine lipophilicity of neutral and basic compounds using three base deactivated RPLC stationary phases particularly designed for the analysis of basic compounds, namely, Supelcosil ABZ(+)Plus, Discovery RP Amide C16, and Zorbax Extend C18. The work consisted of three sets of experiments. In the first log kw values of neutral compounds were extrapolated using hydroorganic mobile phases at different compositions. Good correlation between log kw and log Poct indicated that the method was appropriate for these supports, without adding a silanol masking agent. In the second set of experiments, isocratic log k values of neutral and basic compounds were measured with three different mobile phases. The best estimation of lipophilicity was obtained for neutral and basic compounds when the secondary interactions were strongly reduced (i. e., when basic compounds were under their neutral form). In the third set of experiments, isocratic retention factors of basic compounds (in their neutral form) were measured with a high-pH mobile phase, on a chemically stable support (Zorbax Extend C18). Under these chromatographic conditions, correlation between the isocratic retention factors and log Poct (log D10.5) for basic compounds was similar to that for neutral compounds.

Chromatography, Liquid↗

PubMed2005

Extraction and analysis of different Cannabis samples by headspace solid-phase microextraction combined with gas chromatography-mass spectrometry.

A headspace solid-phase microextraction combined with GC-MS method was developed for the extraction and analysis of cannabinoids from Cannabis samples. Different commercially available fibres were evaluated; polydimethylsiloxane 100 microm was selected as the most efficient one. In order to enhance sensitivity and reduce analysis time, the sampling temperature was studied and it showed that extraction should be performed at a high temperature (150 degrees C). In relation with the high lipophilicity of cannabinoids, a relatively long desorption time (3 min) was necessary to ensure a total transfer from the fibre into the injection port of the gas chromatograph. The method was finally applied to the extraction of Swiss marijuana samples from different regions. Data treatment by principal component analysis and hierarchical cluster analysis allowed a discrimination of the different batches.

Cannabidiol↗