PubMed Health⌕ Search

Biomedical subjects

Sergei Sukharev

Publications and source records attributed to Sergei Sukharev.

11 recordsLinked to original sources
PubMed2005

Capping transmembrane helices of MscL with aromatic residues changes channel response to membrane stretch.

Tyrosines and tryptophans that anchor both ends of the helices to membrane interfaces in many transmembrane proteins are not common in MscL and homologous mechanosensitive channels. This characteristic absence of two aromatic "belts" may be critical for MscL function as the opening transition is predicted to be associated with a strong helical reorientation. A single tyrosine (Y75) on the extracellular side of the M2 helix of pentameric EcoMscL is absent in TbMscL, which instead has a single tyrosine (Y87) on the cytoplasmic side of M2. Moving the tyrosine of EcoMscL to the intracellular side (Y75F/F93Y) or capping the TM2 helix on both sides (F93Y/W) slows the kinetics of gating and increases the threshold for activation, leading to a partial loss-of-function in osmotic shock survival assays. Increasing the distance between the caps (L98W, L102Y/W) partially restores channel function presumably by loosening restraints for tilting. Capping the TM2 helix with a charged residue (Y75E) causes a right shift of the activation curve ("stiff" phenotype) and abolishes function. Introducing a "cap" into the TM1 helix (I41W) decreases the activation threshold and shortens the mean open time but unexpectedly leads to a complete loss-of-function in vivo. The data are consistent with the view that restraining helical positions in MscL by introducing specific protein-lipid interactions at membrane interfaces compromises MscL function. Subtle differences in osmotic shock survival are more evident at low levels of mutant protein expression. We observed a correlation between the right shift of tension activation threshold and the loss-of-function channel phenotype, with a few exceptions that point to other parameters of gating that may define the osmotic rescuing ability in vivo.

Amino Acid Substitution↗
PubMed2005

The "dashpot" mechanism of stretch-dependent gating in MscS.

The crystal structure of the small conductance mechanosensitive channel (MscS) has been an invaluable tool in the search for the gating mechanism, however many functional aspects of the channel remain unsettled. Here we characterized the gating of MscS in Escherichia coli spheroplasts in a triple mutant (mscL-, mscS-, mscK-) background. We used a pressure clamp apparatus along with software developed in-lab to generate dose-response curves directly from two-channel recordings of current and pressure. In contrast to previous publications, we found that MscS exhibits essentially voltage-independent activation by tension, but at the same time strong voltage-dependent inactivation under depolarizing conditions. The MscS activation curves obtained under saturating ramps of pressure, at different voltages, gave estimates for the energy, area, and gating charge for the closed-to-open transition as 24 kT, 18 nm2, and +0.8, respectively. The character of activation and inactivation was similar in both K+ and Na+ buffers. Perhaps the most salient and intriguing property of MscS gating was a strong dependence on the rate of pressure application. Patches subjected to various pressure ramps from 2.7 to 240 mmHg/s revealed a midpoint of activation almost independent of rate. However, the resultant channel activity was dramatically lower when pressure was applied slowly, especially at depolarizing pipette voltages. It appears that MscS prefers to respond in full to abrupt stimuli but manages to ignore those applied slowly, as if the gate were connected to the tension-transmitting element via a velocity-sensitive "dashpot." With slower ramps, channels inactivate during the passage through a narrow region of pressures below the activation midpoint. This property of "dumping" a slowly applied force may be important in environmental situations where rehydration of cells occurs gradually and release of osmolytes is not desirable. MscS often enters the inactivated state through subconducting states favored by depolarizing voltage. The inactivation rate increases exponentially with depolarization. Based on these results we propose a kinetic scheme and gating mechanism to account for the observed phenomenology in the framework of available structural information.

Electrophysiology↗
PubMed2005

Gain-of-function mutations reveal expanded intermediate states and a sequential action of two gates in MscL.

The tension-driven gating transition in the large mechanosensitive channel MscL proceeds through detectable states of intermediate conductance. Gain-of-function (GOF) mutants with polar or charged substitutions in the main hydrophobic gate display altered patterns of subconducting states, providing valuable information about gating intermediates. Here we present thermodynamic analysis of several GOF mutants to clarify the nature and position of low-conducting conformations in the transition pathway. Unlike wild-type (WT) MscL, which predominantly occupies the closed and fully open states with very brief substates, the mild V23T GOF mutant frequently visits a multitude of short-lived subconducting states. Severe mutants V23D and G22N open in sequence: closed (C) --> low-conducting substate (S) --> open (O), with the first subtransition occurring at lower tensions. Analyses of equilibrium state occupancies as functions of membrane tension show that the C-->S subtransition in WT MscL is associated with only a minor conductance increment, but the largest in-plane expansion and free energy change. The GOF substitutions strongly affect the first subtransition by reducing area ((Delta)A) and energy ((Delta)E) changes between C and S states commensurably with the severity of mutation. GOF mutants also exhibited a considerably larger (Delta)E associated with the second (S-->O) subtransition, but a (Delta)A similar to WT. The area changes indicate that closed conformations of GOF mutants are physically preexpanded. The tension dependencies of rate constants for channel closure (k(off)) predict different positions of rate-limiting barriers on the energy-area profiles for WT and GOF MscL. The data support the two-gate mechanism in which the first subtransition (C-->S) can be viewed as opening of the central (M1) gate, resulting in an expanded water-filled "leaky" conformation. Strong facilitation of this step by polar GOF substitutions suggests that separation of M1 helices associated with hydration of the pore in WT MscL is the major energetic barrier for opening. Mutants with a stabilized S1 gate demonstrate impeded transitions from low-conducting substates to the fully open state, whereas extensions of S1-M1 linkers result in a much higher probability of reverse O-->S transitions. These data strongly suggest that the bulk of conductance gain in the second subtransition (S-->O) occurs through the opening of the NH2-terminal (S1) gate and the linkers are coupling elements between the M1 and S1 gates.

Electrophysiology↗
PubMed2004

Mechanosensitive channels: multiplicity of families and gating paradigms.

Mechanosensitive ion channels are the primary transducers that convert mechanical force into an electrical or chemical signal in hearing, touch, and other mechanical senses. Unlike vision, olfaction, and some types of taste, which all use similar kinds of primary heterotrimeric GTP-binding protein-coupled receptors, mechanosensation relies on diverse types of transducer molecules. Unrelated types of channels can be used for the perception of various mechanical stimuli, not only in distant groups of organisms, but also in separate locations of the same organism. The extreme sensitivity of the transduction mechanism in the auditory system, which relies on an elaborate structure of rigid cilia, filamentous links, and molecular motors to focus force on transduction channels, contrasts with that of the bacterial channel MscL, which is opened by high lateral tension in the membrane and fulfills a safety-valve rather than a sensory function. The spatial scales of conformational movement and force in these two systems are described, and are shown to be consistent with a general physical description of mechanical channel gating. We outline the characteristics of several types of mechanosensitive channels and the functional contexts in which they participate in signaling and cellular regulation in sensory and nonsensory cells.

Animals↗
PubMed2004

Mechanosensitive channels: what can we learn from 'simple' model systems?

Mechanosensitive ion channels, which convert external mechanical forces into electrical and chemical signals in cells, are diverse. Presently, there is no known common sequence 'signature' that identifies mechanosensitivity. Bacterial mechanosensitive channels gated by membrane tension represent convenient models allowing us to combine structural information with the insights gained from biophysical analysis, biochemistry, genetic screens, bacterial physiology and molecular computation. Here, the conformational transition driven by membrane tension in the bacterial channel MscL is discussed. The predicted pathway suggests roles for distinct protein domains, surrounding lipids and water in the gating process. MscL, a simple system, thus helps us obtain a coherent picture of molecular events, and build concepts and strategies that can be applied to more elaborate mechanosensory systems in the near future.

Amino Acid Sequence↗
PubMed2004

Gating of the large mechanosensitive channel in situ: estimation of the spatial scale of the transition from channel population responses.

Physical expansion associated with the opening of a tension-sensitive channel has the same meaning as gating charge for a voltage-gated channel. Despite increasing evidence for the open-state conformation of MscL, the energetic description of its complex gating remains incomplete. The previously estimated in-plane expansion of MscL is considerably smaller than predicted by molecular models. To resolve this discrepancy, we conducted a systematic study of currents and dose-response curves for wild-type MscL in Escherichia coli giant spheroplasts. Using the all-point histogram method and calibrating tension against the threshold for the small mechanosensitive channel (MscS) in each patch, we found that the distribution of channels among the subconducting states is significantly less dependent on tension than the distribution between the closed and conducting states. At -20 mV, all substates together occupy approximately 30% of the open time and reduce the mean integral current by approximately 6%, essentially independent of tension or P(o). This is consistent with the gating scheme in which the major rate-limiting step is the transition between the closed state and a low-conducting substate, and validates both the use of the integral current as a measure of P(o), and treatment of dose-response curves in the two-state approximation. The apparent energy and area differences between the states deltaE and deltaA, extracted from 29 independent dose-response curves, varied in a linearly correlated manner whereas the midpoint tension stayed at approximately 10.4 mN/m. Statistical modeling suggests slight variability of gating parameters among channels in each patch, causing a strong reduction and correlated spread of apparent deltaE and deltaA. The slope of initial parts of activation curves, with a few channels being active, gave estimates of deltaE = 51 +/- 13 kT and deltaA = 20.4 +/- 4.8 nm(2), the latter being consistent with structural models of MscL, which predict deltaA = 23 nm(2).

Biophysics↗
PubMed2004

Water dynamics and dewetting transitions in the small mechanosensitive channel MscS.

The dynamics of confined water in capillaries and nanotubes suggests that gating of ion channels may involve not only changes of the pore geometry, but also transitions between water-filled and empty states in certain locations. The recently solved heptameric structure of the small mechanosensitive channel of Escherichia coli, MscS, has revealed a relatively wide (7-15 A) yet highly hydrophobic transmembrane pore. Continuum estimations based on the properties of pore surface suggest low conductance and a thermodynamic possibility of dewetting. To test the predictions we performed molecular dynamics simulations of MscS filled with flexible TIP3P water. Irrespective to the initial conditions, several independent 6-ns simulations converged to the same stable state with the pore water-filled in the wider part, but predominantly empty in the narrow hydrophobic part, displaying intermittent vapor-liquid transitions. The polar gain-of-function substitution L109S in the constriction resulted in a stable hydration of the entire pore. Steered passages of Cl(-) ions through the narrow part of the pore consistently produced partial ion dehydration and required a force of 200-400 pN to overcome an estimated barrier of 10-20 kcal/mole, implying negligibly low conductance. We conclude that the crystal structure of MscS does not represent an open state. We infer that MscS gate, which is similar to that of the nicotinic ACh receptor, involves a vapor-lock mechanism where limited changes of geometry or surface polarity can locally switch the regime between water-filled (conducting) and empty (nonconducting) states.

Chlorine↗
PubMed2003

On the conformation of the COOH-terminal domain of the large mechanosensitive channel MscL.

COOH-terminal (S3) domains are conserved within the MscL family of bacterial mechanosensitive channels, but their function remains unclear. The X-ray structure of MscL from Mycobacterium tuberculosis (TbMscL) revealed cytoplasmic domains forming a pentameric bundle (Chang, G., R.H. Spencer, A.T. Lee, M.T. Barclay, and D.C. Rees. 1998. SCIENCE: 282:2220-2226). The helices, however, have an unusual orientation in which hydrophobic sidechains face outside while charged residues face inside, possibly due to specific crystallization conditions. Based on the structure of pentameric cartilage protein, we modeled the COOH-terminal region of E. coli MscL to better satisfy the hydrophobicity criteria, with sidechains of conserved aliphatic residues all inside the bundle. Molecular dynamic simulations predicted higher stability for this conformation compared with one modeled after the crystal structure of TbMscL, and suggested distances for disulfide trapping experiments. The single cysteine mutants L121C and I125C formed dimers under ambient conditions and more so in the presence of an oxidant. The double-cysteine mutants, L121C/L122C and L128C/L129C, often cross-link into tetrameric and pentameric structures, consistent with the new model. Patch-clamp examination of these double mutants under moderately oxidizing or reducing conditions indicated that the bundle cross-linking neither prevents the channel from opening nor changes thermodynamic parameters of gating. Destabilization of the bundle by replacing conservative leucines with small polar residues, or complete removal of COOH-terminal domain (Delta110-136 mutation), increased the occupancy of subconducting states but did not change gating parameters substantially. The Delta110-136 truncation mutant was functional in in vivo osmotic shock assays; however, the amount of ATP released into the shock medium was considerably larger than in controls. The data strongly suggest that in contrast to previous gating models (Sukharev, S., M. Betanzos, C.S. Chiang, and H.R. Guy. 2001a. NATURE: 409:720-724.), S3 domains are stably associated in both closed and open conformations. The bundle-like assembly of cytoplasmic helices provides stability to the open conformation, and may function as a size-exclusion filter at the cytoplasmic entrance to the MscL pore, preventing loss of essential metabolites.

Amino Acid Sequence↗
PubMed2002

Purification of the small mechanosensitive channel of Escherichia coli (MscS): the subunit structure, conduction, and gating characteristics in liposomes.

The small mechanosensitive channel, MscS, is a part of the turgor-driven solute efflux system that protects bacteria from lysis in the event of osmotic downshift. It has been identified in Escherichia coli as a product of the orphan yggB gene, now called mscS (Levina et al., 1999, EMBO J. 18:1730). Here I show that that the isolated 31-kDa MscS protein is sufficient to form a functional mechanosensitive channel gated directly by tension in the lipid bilayer. MscS-6His complexes purified in the presence of octylglucoside and lipids migrate in a high-resolution gel-filtration column as particles of approximately 200 kDa. Consistent with that, the protein cross-linking patterns predict a hexamer. The channel reconstituted in soybean asolectin liposomes was activated by pressures of 20-60 mm Hg and displayed the same asymmetric I-V curve and slight anionic preference as in situ. At the same time, the single-channel conductance is proportional to the buffer conductivity in a wide range of salt concentrations. The rate of channel activation in response to increasing pressure gradient across the patch was slower than the rate of closure in response to decreasing steps of pressure gradient. Therefore, the open probability curves were recorded with descending series of pressures. Determination of the curvature of patches by video imaging permitted measurements of the channel activity as a function of membrane tension (gamma). Po(gamma) curves had the midpoint at 5.5 +/- 0.1 dyne/cm and gave estimates for the energy of opening DeltaG = 11.4 +/- 0.5 kT, and the transition-related area change DeltaA = 8.4 +/- 0.4 nm(2) when fitted with a two-state Boltzmann model. The correspondence between channel properties in the native and reconstituted systems is discussed.

Bacterial Proteins↗
PubMed2002

A large iris-like expansion of a mechanosensitive channel protein induced by membrane tension.

MscL, a bacterial mechanosensitive channel of large conductance, is the first structurally characterized mechanosensor protein. Molecular models of its gating mechanisms are tested here. Disulfide crosslinking shows that M1 transmembrane alpha-helices in MscL of resting Escherichia coli are arranged similarly to those in the crystal structure of MscL from Mycobacterium tuberculosis. An expanded conformation was trapped in osmotically shocked cells by the specific bridging between Cys 20 and Cys 36 of adjacent M1 helices. These bridges stabilized the open channel. Disulfide bonds engineered between the M1 and M2 helices of adjacent subunits (Cys 32-Cys 81) do not prevent channel gating. These findings support gating models in which interactions between M1 and M2 of adjacent subunits remain unaltered while their tilts simultaneously increase. The MscL barrel, therefore, undergoes a large concerted iris-like expansion and flattening when perturbed by membrane tension.

Escherichia coli↗